--- zzzz-none-000/linux-3.10.107/drivers/target/iscsi/iscsi_target_erl0.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/target/iscsi/iscsi_target_erl0.c	2021-02-04 17:41:59.000000000 +0000
@@ -2,9 +2,7 @@
  * This file contains error recovery level zero functions used by
  * the iSCSI Target driver.
  *
- * \u00a9 Copyright 2007-2011 RisingTide Systems LLC.
- *
- * Licensed to the Linux Foundation under the General Public License (GPL) version 2.
+ * (c) Copyright 2007-2013 Datera, Inc.
  *
  * Author: Nicholas A. Bellinger <nab@linux-iscsi.org>
  *
@@ -23,9 +21,8 @@
 #include <target/target_core_base.h>
 #include <target/target_core_fabric.h>
 
-#include "iscsi_target_core.h"
+#include <target/iscsi/iscsi_target_core.h>
 #include "iscsi_target_seq_pdu_list.h"
-#include "iscsi_target_tq.h"
 #include "iscsi_target_erl0.h"
 #include "iscsi_target_erl1.h"
 #include "iscsi_target_erl2.h"
@@ -347,7 +344,6 @@
 	struct iscsi_cmd *cmd,
 	unsigned char *buf)
 {
-	int dump = 0, recovery = 0;
 	u32 data_sn = 0;
 	struct iscsi_conn *conn = cmd->conn;
 	struct iscsi_data *hdr = (struct iscsi_data *) buf;
@@ -372,13 +368,11 @@
 		pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
 			" higher than expected 0x%08x.\n", cmd->init_task_tag,
 				be32_to_cpu(hdr->datasn), data_sn);
-		recovery = 1;
 		goto recover;
 	} else if (be32_to_cpu(hdr->datasn) < data_sn) {
 		pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
 			" lower than expected 0x%08x, discarding payload.\n",
 			cmd->init_task_tag, be32_to_cpu(hdr->datasn), data_sn);
-		dump = 1;
 		goto dump;
 	}
 
@@ -394,8 +388,7 @@
 	if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
 		return DATAOUT_CANNOT_RECOVER;
 
-	return (recovery || dump) ? DATAOUT_WITHIN_COMMAND_RECOVERY :
-				DATAOUT_NORMAL;
+	return DATAOUT_WITHIN_COMMAND_RECOVERY;
 }
 
 static int iscsit_dataout_pre_datapduinorder_yes(
@@ -759,7 +752,7 @@
 static void iscsit_handle_time2retain_timeout(unsigned long data)
 {
 	struct iscsi_session *sess = (struct iscsi_session *) data;
-	struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
+	struct iscsi_portal_group *tpg = sess->tpg;
 	struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
 
 	spin_lock_bh(&se_tpg->session_lock);
@@ -787,7 +780,7 @@
 		tiqn->sess_err_stats.last_sess_failure_type =
 				ISCSI_SESS_ERR_CXN_TIMEOUT;
 		tiqn->sess_err_stats.cxn_timeout_errors++;
-		sess->conn_timeout_errors++;
+		atomic_long_inc(&sess->conn_timeout_errors);
 		spin_unlock(&tiqn->sess_err_stats.lock);
 	}
 	}
@@ -803,9 +796,9 @@
 	 * Only start Time2Retain timer when the associated TPG is still in
 	 * an ACTIVE (eg: not disabled or shutdown) state.
 	 */
-	spin_lock(&ISCSI_TPG_S(sess)->tpg_state_lock);
-	tpg_active = (ISCSI_TPG_S(sess)->tpg_state == TPG_STATE_ACTIVE);
-	spin_unlock(&ISCSI_TPG_S(sess)->tpg_state_lock);
+	spin_lock(&sess->tpg->tpg_state_lock);
+	tpg_active = (sess->tpg->tpg_state == TPG_STATE_ACTIVE);
+	spin_unlock(&sess->tpg->tpg_state_lock);
 
 	if (!tpg_active)
 		return;
@@ -831,7 +824,7 @@
  */
 int iscsit_stop_time2retain_timer(struct iscsi_session *sess)
 {
-	struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
+	struct iscsi_portal_group *tpg = sess->tpg;
 	struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
 
 	if (sess->time2retain_timer_flags & ISCSI_TF_EXPIRED)
@@ -963,56 +956,3 @@
 
 	iscsit_handle_connection_cleanup(conn);
 }
-
-/*
- *	This is the simple function that makes the magic of
- *	sync and steering happen in the follow paradoxical order:
- *
- *	0) Receive conn->of_marker (bytes left until next OFMarker)
- *	   bytes into an offload buffer.  When we pass the exact number
- *	   of bytes in conn->of_marker, iscsit_dump_data_payload() and hence
- *	   rx_data() will automatically receive the identical u32 marker
- *	   values and store it in conn->of_marker_offset;
- *	1) Now conn->of_marker_offset will contain the offset to the start
- *	   of the next iSCSI PDU.  Dump these remaining bytes into another
- *	   offload buffer.
- *	2) We are done!
- *	   Next byte in the TCP stream will contain the next iSCSI PDU!
- *	   Cool Huh?!
- */
-int iscsit_recover_from_unknown_opcode(struct iscsi_conn *conn)
-{
-	/*
-	 * Make sure the remaining bytes to next maker is a sane value.
-	 */
-	if (conn->of_marker > (conn->conn_ops->OFMarkInt * 4)) {
-		pr_err("Remaining bytes to OFMarker: %u exceeds"
-			" OFMarkInt bytes: %u.\n", conn->of_marker,
-				conn->conn_ops->OFMarkInt * 4);
-		return -1;
-	}
-
-	pr_debug("Advancing %u bytes in TCP stream to get to the"
-			" next OFMarker.\n", conn->of_marker);
-
-	if (iscsit_dump_data_payload(conn, conn->of_marker, 0) < 0)
-		return -1;
-
-	/*
-	 * Make sure the offset marker we retrived is a valid value.
-	 */
-	if (conn->of_marker_offset > (ISCSI_HDR_LEN + (ISCSI_CRC_LEN * 2) +
-	    conn->conn_ops->MaxRecvDataSegmentLength)) {
-		pr_err("OfMarker offset value: %u exceeds limit.\n",
-			conn->of_marker_offset);
-		return -1;
-	}
-
-	pr_debug("Discarding %u bytes of TCP stream to get to the"
-			" next iSCSI Opcode.\n", conn->of_marker_offset);
-
-	if (iscsit_dump_data_payload(conn, conn->of_marker_offset, 0) < 0)
-		return -1;
-
-	return 0;
-}