--- zzzz-none-000/linux-3.10.107/drivers/usb/host/ohci-hcd.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/usb/host/ohci-hcd.c 2021-02-04 17:41:59.000000000 +0000 @@ -51,8 +51,6 @@ /*-------------------------------------------------------------------------*/ -#undef OHCI_VERBOSE_DEBUG /* not always helpful */ - /* For initializing controller (mask in an HCFS mode too) */ #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR #define OHCI_INTR_INIT \ @@ -74,27 +72,14 @@ static const char hcd_name [] = "ohci_hcd"; #define STATECHANGE_DELAY msecs_to_jiffies(300) +#define IO_WATCHDOG_DELAY msecs_to_jiffies(275) #include "ohci.h" #include "pci-quirks.h" -static void ohci_dump (struct ohci_hcd *ohci, int verbose); -static int ohci_init (struct ohci_hcd *ohci); -static void ohci_stop (struct usb_hcd *hcd); - -#if defined(CONFIG_PM) || defined(CONFIG_PCI) -static int ohci_restart (struct ohci_hcd *ohci); -#endif - -#ifdef CONFIG_PCI -static void sb800_prefetch(struct ohci_hcd *ohci, int on); -#else -static inline void sb800_prefetch(struct ohci_hcd *ohci, int on) -{ - return; -} -#endif - +static void ohci_dump(struct ohci_hcd *ohci); +static void ohci_stop(struct usb_hcd *hcd); +static void io_watchdog_func(unsigned long _ohci); #include "ohci-hub.c" #include "ohci-dbg.c" @@ -126,6 +111,33 @@ /*-------------------------------------------------------------------------*/ +static int number_of_tds(struct urb *urb) +{ + int len, i, num, this_sg_len; + struct scatterlist *sg; + + len = urb->transfer_buffer_length; + i = urb->num_mapped_sgs; + + if (len > 0 && i > 0) { /* Scatter-gather transfer */ + num = 0; + sg = urb->sg; + for (;;) { + this_sg_len = min_t(int, sg_dma_len(sg), len); + num += DIV_ROUND_UP(this_sg_len, 4096); + len -= this_sg_len; + if (--i <= 0 || len <= 0) + break; + sg = sg_next(sg); + } + + } else { /* Non-SG transfer */ + /* one TD for every 4096 Bytes (could be up to 8K) */ + num = DIV_ROUND_UP(len, 4096); + } + return num; +} + /* * queue up an urb for anything except the root hub */ @@ -142,12 +154,9 @@ unsigned long flags; int retval = 0; -#ifdef OHCI_VERBOSE_DEBUG - urb_print(urb, "SUB", usb_pipein(pipe), -EINPROGRESS); -#endif - /* every endpoint has a ed, locate and maybe (re)initialize it */ - if (! (ed = ed_get (ohci, urb->ep, urb->dev, pipe, urb->interval))) + ed = ed_get(ohci, urb->ep, urb->dev, pipe, urb->interval); + if (! ed) return -ENOMEM; /* for the private part of the URB we need the number of TDs (size) */ @@ -163,12 +172,8 @@ // case PIPE_INTERRUPT: // case PIPE_BULK: default: - /* one TD for every 4096 Bytes (can be up to 8K) */ - size += urb->transfer_buffer_length / 4096; - /* ... and for any remaining bytes ... */ - if ((urb->transfer_buffer_length % 4096) != 0) - size++; - /* ... and maybe a zero length packet to wrap it up */ + size += number_of_tds(urb); + /* maybe a zero-length packet to wrap it up */ if (size == 0) size++; else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 @@ -223,6 +228,16 @@ usb_hcd_unlink_urb_from_ep(hcd, urb); goto fail; } + + /* Start up the I/O watchdog timer, if it's not running */ + if (!timer_pending(&ohci->io_watchdog) && + list_empty(&ohci->eds_in_use)) { + ohci->prev_frame_no = ohci_frame_no(ohci); + mod_timer(&ohci->io_watchdog, + jiffies + IO_WATCHDOG_DELAY); + } + list_add(&ed->in_use_list, &ohci->eds_in_use); + if (ed->type == PIPE_ISOCHRONOUS) { u16 frame = ohci_frame_no(ohci); @@ -298,34 +313,24 @@ struct ohci_hcd *ohci = hcd_to_ohci (hcd); unsigned long flags; int rc; - -#ifdef OHCI_VERBOSE_DEBUG - urb_print(urb, "UNLINK", 1, status); -#endif + urb_priv_t *urb_priv; spin_lock_irqsave (&ohci->lock, flags); rc = usb_hcd_check_unlink_urb(hcd, urb, status); - if (rc) { - ; /* Do nothing */ - } else if (ohci->rh_state == OHCI_RH_RUNNING) { - urb_priv_t *urb_priv; + if (rc == 0) { /* Unless an IRQ completed the unlink while it was being * handed to us, flag it for unlink and giveback, and force * some upcoming INTR_SF to call finish_unlinks() */ urb_priv = urb->hcpriv; - if (urb_priv) { - if (urb_priv->ed->state == ED_OPER) - start_ed_unlink (ohci, urb_priv->ed); + if (urb_priv->ed->state == ED_OPER) + start_ed_unlink(ohci, urb_priv->ed); + + if (ohci->rh_state != OHCI_RH_RUNNING) { + /* With HC dead, we can clean up right away */ + ohci_work(ohci); } - } else { - /* - * with HC dead, we won't respect hc queue pointers - * any more ... just clean up every urb's memory. - */ - if (urb->hcpriv) - finish_urb(ohci, urb, status); } spin_unlock_irqrestore (&ohci->lock, flags); return rc; @@ -357,9 +362,7 @@ if (ohci->rh_state != OHCI_RH_RUNNING) { sanitize: ed->state = ED_IDLE; - if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT) - ohci->eds_scheduled--; - finish_unlinks (ohci, 0); + ohci_work(ohci); } switch (ed->state) { @@ -367,11 +370,6 @@ /* major IRQ delivery trouble loses INTR_SF too... */ if (limit-- == 0) { ohci_warn(ohci, "ED unlink timeout\n"); - if (quirk_zfmicro(ohci)) { - ohci_warn(ohci, "Attempting ZF TD recovery\n"); - ohci->ed_to_check = ed; - ohci->zf_delay = 2; - } goto sanitize; } spin_unlock_irqrestore (&ohci->lock, flags); @@ -431,93 +429,7 @@ udelay(10); ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval); -} - -static int check_ed(struct ohci_hcd *ohci, struct ed *ed) -{ - return (hc32_to_cpu(ohci, ed->hwINFO) & ED_IN) != 0 - && (hc32_to_cpu(ohci, ed->hwHeadP) & TD_MASK) - == (hc32_to_cpu(ohci, ed->hwTailP) & TD_MASK) - && !list_empty(&ed->td_list); -} - -/* ZF Micro watchdog timer callback. The ZF Micro chipset sometimes completes - * an interrupt TD but neglects to add it to the donelist. On systems with - * this chipset, we need to periodically check the state of the queues to look - * for such "lost" TDs. - */ -static void unlink_watchdog_func(unsigned long _ohci) -{ - unsigned long flags; - unsigned max; - unsigned seen_count = 0; - unsigned i; - struct ed **seen = NULL; - struct ohci_hcd *ohci = (struct ohci_hcd *) _ohci; - - spin_lock_irqsave(&ohci->lock, flags); - max = ohci->eds_scheduled; - if (!max) - goto done; - - if (ohci->ed_to_check) - goto out; - - seen = kcalloc(max, sizeof *seen, GFP_ATOMIC); - if (!seen) - goto out; - - for (i = 0; i < NUM_INTS; i++) { - struct ed *ed = ohci->periodic[i]; - - while (ed) { - unsigned temp; - - /* scan this branch of the periodic schedule tree */ - for (temp = 0; temp < seen_count; temp++) { - if (seen[temp] == ed) { - /* we've checked it and what's after */ - ed = NULL; - break; - } - } - if (!ed) - break; - seen[seen_count++] = ed; - if (!check_ed(ohci, ed)) { - ed = ed->ed_next; - continue; - } - - /* HC's TD list is empty, but HCD sees at least one - * TD that's not been sent through the donelist. - */ - ohci->ed_to_check = ed; - ohci->zf_delay = 2; - - /* The HC may wait until the next frame to report the - * TD as done through the donelist and INTR_WDH. (We - * just *assume* it's not a multi-TD interrupt URB; - * those could defer the IRQ more than one frame, using - * DI...) Check again after the next INTR_SF. - */ - ohci_writel(ohci, OHCI_INTR_SF, - &ohci->regs->intrstatus); - ohci_writel(ohci, OHCI_INTR_SF, - &ohci->regs->intrenable); - - /* flush those writes */ - (void) ohci_readl(ohci, &ohci->regs->control); - - goto out; - } - } -out: - kfree(seen); - if (ohci->eds_scheduled) - mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ)); -done: - spin_unlock_irqrestore(&ohci->lock, flags); + ohci->rh_state = OHCI_RH_HALTED; } /*-------------------------------------------------------------------------* @@ -531,6 +443,9 @@ int ret; struct usb_hcd *hcd = ohci_to_hcd(ohci); + /* Accept arbitrarily long scatter-gather lists */ + hcd->self.sg_tablesize = ~0; + if (distrust_firmware) ohci->flags |= OHCI_QUIRK_HUB_POWER; @@ -583,8 +498,12 @@ if (ohci->hcca) return 0; + setup_timer(&ohci->io_watchdog, io_watchdog_func, + (unsigned long) ohci); + set_timer_slack(&ohci->io_watchdog, msecs_to_jiffies(20)); + ohci->hcca = dma_alloc_coherent (hcd->self.controller, - sizeof *ohci->hcca, &ohci->hcca_dma, 0); + sizeof(*ohci->hcca), &ohci->hcca_dma, GFP_KERNEL); if (!ohci->hcca) return -ENOMEM; @@ -714,7 +633,7 @@ return -EOVERFLOW; } - /* use rhsc irqs after khubd is fully initialized */ + /* use rhsc irqs after hub_wq is allocated */ set_bit(HCD_FLAG_POLL_RH, &hcd->flags); hcd->uses_new_polling = 1; @@ -760,22 +679,175 @@ // POTPGT delay is bits 24-31, in 2 ms units. mdelay ((val >> 23) & 0x1fe); - if (quirk_zfmicro(ohci)) { - /* Create timer to watch for bad queue state on ZF Micro */ - setup_timer(&ohci->unlink_watchdog, unlink_watchdog_func, - (unsigned long) ohci); + ohci_dump(ohci); - ohci->eds_scheduled = 0; - ohci->ed_to_check = NULL; - } + return 0; +} - ohci_dump (ohci, 1); +/* ohci_setup routine for generic controller initialization */ - return 0; +int ohci_setup(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci_hcd_init(ohci); + + return ohci_init(ohci); +} +EXPORT_SYMBOL_GPL(ohci_setup); + +/* ohci_start routine for generic controller start of all OHCI bus glue */ +static int ohci_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + ret = ohci_run(ohci); + if (ret < 0) { + ohci_err(ohci, "can't start\n"); + ohci_stop(hcd); + } + return ret; } /*-------------------------------------------------------------------------*/ +/* + * Some OHCI controllers are known to lose track of completed TDs. They + * don't add the TDs to the hardware done queue, which means we never see + * them as being completed. + * + * This watchdog routine checks for such problems. Without some way to + * tell when those TDs have completed, we would never take their EDs off + * the unlink list. As a result, URBs could never be dequeued and + * endpoints could never be released. + */ +static void io_watchdog_func(unsigned long _ohci) +{ + struct ohci_hcd *ohci = (struct ohci_hcd *) _ohci; + bool takeback_all_pending = false; + u32 status; + u32 head; + struct ed *ed; + struct td *td, *td_start, *td_next; + unsigned frame_no; + unsigned long flags; + + spin_lock_irqsave(&ohci->lock, flags); + + /* + * One way to lose track of completed TDs is if the controller + * never writes back the done queue head. If it hasn't been + * written back since the last time this function ran and if it + * was non-empty at that time, something is badly wrong with the + * hardware. + */ + status = ohci_readl(ohci, &ohci->regs->intrstatus); + if (!(status & OHCI_INTR_WDH) && ohci->wdh_cnt == ohci->prev_wdh_cnt) { + if (ohci->prev_donehead) { + ohci_err(ohci, "HcDoneHead not written back; disabled\n"); + died: + usb_hc_died(ohci_to_hcd(ohci)); + ohci_dump(ohci); + ohci_shutdown(ohci_to_hcd(ohci)); + goto done; + } else { + /* No write back because the done queue was empty */ + takeback_all_pending = true; + } + } + + /* Check every ED which might have pending TDs */ + list_for_each_entry(ed, &ohci->eds_in_use, in_use_list) { + if (ed->pending_td) { + if (takeback_all_pending || + OKAY_TO_TAKEBACK(ohci, ed)) { + unsigned tmp = hc32_to_cpu(ohci, ed->hwINFO); + + ohci_dbg(ohci, "takeback pending TD for dev %d ep 0x%x\n", + 0x007f & tmp, + (0x000f & (tmp >> 7)) + + ((tmp & ED_IN) >> 5)); + add_to_done_list(ohci, ed->pending_td); + } + } + + /* Starting from the latest pending TD, */ + td = ed->pending_td; + + /* or the last TD on the done list, */ + if (!td) { + list_for_each_entry(td_next, &ed->td_list, td_list) { + if (!td_next->next_dl_td) + break; + td = td_next; + } + } + + /* find the last TD processed by the controller. */ + head = hc32_to_cpu(ohci, ACCESS_ONCE(ed->hwHeadP)) & TD_MASK; + td_start = td; + td_next = list_prepare_entry(td, &ed->td_list, td_list); + list_for_each_entry_continue(td_next, &ed->td_list, td_list) { + if (head == (u32) td_next->td_dma) + break; + td = td_next; /* head pointer has passed this TD */ + } + if (td != td_start) { + /* + * In case a WDH cycle is in progress, we will wait + * for the next two cycles to complete before assuming + * this TD will never get on the done queue. + */ + ed->takeback_wdh_cnt = ohci->wdh_cnt + 2; + ed->pending_td = td; + } + } + + ohci_work(ohci); + + if (ohci->rh_state == OHCI_RH_RUNNING) { + + /* + * Sometimes a controller just stops working. We can tell + * by checking that the frame counter has advanced since + * the last time we ran. + * + * But be careful: Some controllers violate the spec by + * stopping their frame counter when no ports are active. + */ + frame_no = ohci_frame_no(ohci); + if (frame_no == ohci->prev_frame_no) { + int active_cnt = 0; + int i; + unsigned tmp; + + for (i = 0; i < ohci->num_ports; ++i) { + tmp = roothub_portstatus(ohci, i); + /* Enabled and not suspended? */ + if ((tmp & RH_PS_PES) && !(tmp & RH_PS_PSS)) + ++active_cnt; + } + + if (active_cnt > 0) { + ohci_err(ohci, "frame counter not updating; disabled\n"); + goto died; + } + } + if (!list_empty(&ohci->eds_in_use)) { + ohci->prev_frame_no = frame_no; + ohci->prev_wdh_cnt = ohci->wdh_cnt; + ohci->prev_donehead = ohci_readl(ohci, + &ohci->regs->donehead); + mod_timer(&ohci->io_watchdog, + jiffies + IO_WATCHDOG_DELAY); + } + } + + done: + spin_unlock_irqrestore(&ohci->lock, flags); +} + /* an interrupt happens */ static irqreturn_t ohci_irq (struct usb_hcd *hcd) @@ -824,12 +896,12 @@ usb_hc_died(hcd); } - ohci_dump (ohci, 1); + ohci_dump(ohci); ohci_usb_reset (ohci); } if (ints & OHCI_INTR_RHSC) { - ohci_vdbg(ohci, "rhsc\n"); + ohci_dbg(ohci, "rhsc\n"); ohci->next_statechange = jiffies + STATECHANGE_DELAY; ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC, ®s->intrstatus); @@ -838,8 +910,8 @@ * choices for RHSC. Many followed the spec; RHSC triggers * on an edge, like setting and maybe clearing a port status * change bit. With others it's level-triggered, active - * until khubd clears all the port status change bits. We'll - * always disable it here and rely on polling until khubd + * until hub_wq clears all the port status change bits. We'll + * always disable it here and rely on polling until hub_wq * re-enables it. */ ohci_writel(ohci, OHCI_INTR_RHSC, ®s->intrdisable); @@ -851,7 +923,7 @@ * this might not happen. */ else if (ints & OHCI_INTR_RD) { - ohci_vdbg(ohci, "resume detect\n"); + ohci_dbg(ohci, "resume detect\n"); ohci_writel(ohci, OHCI_INTR_RD, ®s->intrstatus); set_bit(HCD_FLAG_POLL_RH, &hcd->flags); if (ohci->autostop) { @@ -862,58 +934,30 @@ usb_hcd_resume_root_hub(hcd); } - if (ints & OHCI_INTR_WDH) { - spin_lock (&ohci->lock); - dl_done_list (ohci); - spin_unlock (&ohci->lock); - } - - if (quirk_zfmicro(ohci) && (ints & OHCI_INTR_SF)) { - spin_lock(&ohci->lock); - if (ohci->ed_to_check) { - struct ed *ed = ohci->ed_to_check; - - if (check_ed(ohci, ed)) { - /* HC thinks the TD list is empty; HCD knows - * at least one TD is outstanding - */ - if (--ohci->zf_delay == 0) { - struct td *td = list_entry( - ed->td_list.next, - struct td, td_list); - ohci_warn(ohci, - "Reclaiming orphan TD %p\n", - td); - takeback_td(ohci, td); - ohci->ed_to_check = NULL; - } - } else - ohci->ed_to_check = NULL; - } - spin_unlock(&ohci->lock); - } + spin_lock(&ohci->lock); + if (ints & OHCI_INTR_WDH) + update_done_list(ohci); /* could track INTR_SO to reduce available PCI/... bandwidth */ /* handle any pending URB/ED unlinks, leaving INTR_SF enabled * when there's still unlinking to be done (next frame). */ - spin_lock (&ohci->lock); - if (ohci->ed_rm_list) - finish_unlinks (ohci, ohci_frame_no(ohci)); - if ((ints & OHCI_INTR_SF) != 0 - && !ohci->ed_rm_list - && !ohci->ed_to_check + ohci_work(ohci); + if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list && ohci->rh_state == OHCI_RH_RUNNING) ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable); - spin_unlock (&ohci->lock); if (ohci->rh_state == OHCI_RH_RUNNING) { ohci_writel (ohci, ints, ®s->intrstatus); + if (ints & OHCI_INTR_WDH) + ++ohci->wdh_cnt; + ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable); // flush those writes (void) ohci_readl (ohci, &ohci->regs->control); } + spin_unlock(&ohci->lock); return IRQ_HANDLED; } @@ -924,18 +968,17 @@ { struct ohci_hcd *ohci = hcd_to_ohci (hcd); - ohci_dump (ohci, 1); + ohci_dump(ohci); if (quirk_nec(ohci)) flush_work(&ohci->nec_work); + del_timer_sync(&ohci->io_watchdog); - ohci_usb_reset (ohci); ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); + ohci_usb_reset(ohci); free_irq(hcd->irq, hcd); hcd->irq = 0; - if (quirk_zfmicro(ohci)) - del_timer(&ohci->unlink_watchdog); if (quirk_amdiso(ohci)) usb_amd_dev_put(); @@ -955,12 +998,13 @@ #if defined(CONFIG_PM) || defined(CONFIG_PCI) /* must not be called from interrupt context */ -static int ohci_restart (struct ohci_hcd *ohci) +int ohci_restart(struct ohci_hcd *ohci) { int temp; int i; struct urb_priv *priv; + ohci_init(ohci); spin_lock_irq(&ohci->lock); ohci->rh_state = OHCI_RH_HALTED; @@ -991,7 +1035,7 @@ if (!urb->unlinked) urb->unlinked = -ESHUTDOWN; } - finish_unlinks (ohci, 0); + ohci_work(ohci); spin_unlock_irq(&ohci->lock); /* paranoia, in case that didn't work: */ @@ -1014,15 +1058,17 @@ ohci_dbg(ohci, "restart complete\n"); return 0; } +EXPORT_SYMBOL_GPL(ohci_restart); #endif #ifdef CONFIG_PM -static int __maybe_unused ohci_suspend(struct usb_hcd *hcd, bool do_wakeup) +int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); unsigned long flags; + int rc = 0; /* Disable irq emission and mark HW unaccessible. Use * the spinlock to properly synchronize with possible pending @@ -1035,11 +1081,18 @@ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); spin_unlock_irqrestore (&ohci->lock, flags); - return 0; + synchronize_irq(hcd->irq); + + if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) { + ohci_resume(hcd, false); + rc = -EBUSY; + } + return rc; } +EXPORT_SYMBOL_GPL(ohci_suspend); -static int __maybe_unused ohci_resume(struct usb_hcd *hcd, bool hibernated) +int ohci_resume(struct usb_hcd *hcd, bool hibernated) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); int port; @@ -1087,66 +1140,87 @@ return 0; } +EXPORT_SYMBOL_GPL(ohci_resume); #endif /*-------------------------------------------------------------------------*/ -MODULE_AUTHOR (DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE ("GPL"); - -#ifdef CONFIG_PCI -#include "ohci-pci.c" -#define PCI_DRIVER ohci_pci_driver -#endif - -#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111) -#include "ohci-sa1111.c" -#define SA1111_DRIVER ohci_hcd_sa1111_driver -#endif - -#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX) -#include "ohci-s3c2410.c" -#define S3C2410_PLATFORM_DRIVER ohci_hcd_s3c2410_driver -#endif - -#ifdef CONFIG_USB_OHCI_EXYNOS -#include "ohci-exynos.c" -#define EXYNOS_PLATFORM_DRIVER exynos_ohci_driver -#endif +/* + * Generic structure: This gets copied for platform drivers so that + * individual entries can be overridden as needed. + */ -#ifdef CONFIG_USB_OHCI_HCD_OMAP1 -#include "ohci-omap.c" -#define OMAP1_PLATFORM_DRIVER ohci_hcd_omap_driver +static const struct hc_driver ohci_hc_driver = { + .description = hcd_name, + .product_desc = "OHCI Host Controller", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_MEMORY | HCD_USB11, + + /* + * basic lifecycle operations + */ + .reset = ohci_setup, + .start = ohci_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif + .start_port_reset = ohci_start_port_reset, +}; -#ifdef CONFIG_USB_OHCI_HCD_OMAP3 -#include "ohci-omap3.c" -#define OMAP3_PLATFORM_DRIVER ohci_hcd_omap3_driver -#endif +void ohci_init_driver(struct hc_driver *drv, + const struct ohci_driver_overrides *over) +{ + /* Copy the generic table to drv and then apply the overrides */ + *drv = ohci_hc_driver; -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#include "ohci-pxa27x.c" -#define PLATFORM_DRIVER ohci_hcd_pxa27x_driver -#endif + if (over) { + drv->product_desc = over->product_desc; + drv->hcd_priv_size += over->extra_priv_size; + if (over->reset) + drv->reset = over->reset; + } +} +EXPORT_SYMBOL_GPL(ohci_init_driver); -#ifdef CONFIG_ARCH_EP93XX -#include "ohci-ep93xx.c" -#define EP93XX_PLATFORM_DRIVER ohci_hcd_ep93xx_driver -#endif +/*-------------------------------------------------------------------------*/ -#ifdef CONFIG_ARCH_AT91 -#include "ohci-at91.c" -#define AT91_PLATFORM_DRIVER ohci_hcd_at91_driver -#endif +MODULE_AUTHOR (DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE ("GPL"); -#ifdef CONFIG_ARCH_LPC32XX -#include "ohci-nxp.c" -#define NXP_PLATFORM_DRIVER usb_hcd_nxp_driver +#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111) +#include "ohci-sa1111.c" +#define SA1111_DRIVER ohci_hcd_sa1111_driver #endif -#ifdef CONFIG_ARCH_DAVINCI_DA8XX +#ifdef CONFIG_USB_OHCI_HCD_DAVINCI #include "ohci-da8xx.c" #define DAVINCI_PLATFORM_DRIVER ohci_hcd_da8xx_driver #endif @@ -1156,11 +1230,6 @@ #define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver #endif -#ifdef CONFIG_PLAT_SPEAR -#include "ohci-spear.c" -#define SPEAR_PLATFORM_DRIVER spear_ohci_hcd_driver -#endif - #ifdef CONFIG_PPC_PS3 #include "ohci-ps3.c" #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver @@ -1181,40 +1250,11 @@ #define PLATFORM_DRIVER ohci_hcd_jz4740_driver #endif -#ifdef CONFIG_USB_OCTEON_OHCI -#include "ohci-octeon.c" -#define PLATFORM_DRIVER ohci_octeon_driver -#endif - #ifdef CONFIG_TILE_USB #include "ohci-tilegx.c" #define PLATFORM_DRIVER ohci_hcd_tilegx_driver #endif -#ifdef CONFIG_USB_OHCI_HCD_PLATFORM -#include "ohci-platform.c" -#define PLATFORM_DRIVER ohci_platform_driver -#endif - -#if !defined(PCI_DRIVER) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(OMAP1_PLATFORM_DRIVER) && \ - !defined(OMAP3_PLATFORM_DRIVER) && \ - !defined(OF_PLATFORM_DRIVER) && \ - !defined(SA1111_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && \ - !defined(SM501_OHCI_DRIVER) && \ - !defined(TMIO_OHCI_DRIVER) && \ - !defined(S3C2410_PLATFORM_DRIVER) && \ - !defined(EXYNOS_PLATFORM_DRIVER) && \ - !defined(EP93XX_PLATFORM_DRIVER) && \ - !defined(AT91_PLATFORM_DRIVER) && \ - !defined(NXP_PLATFORM_DRIVER) && \ - !defined(DAVINCI_PLATFORM_DRIVER) && \ - !defined(SPEAR_PLATFORM_DRIVER) -#error "missing bus glue for ohci-hcd" -#endif - static int __init ohci_hcd_mod_init(void) { int retval = 0; @@ -1227,13 +1267,11 @@ sizeof (struct ed), sizeof (struct td)); set_bit(USB_OHCI_LOADED, &usb_hcds_loaded); -#ifdef DEBUG ohci_debug_root = debugfs_create_dir("ohci", usb_debug_root); if (!ohci_debug_root) { retval = -ENOENT; goto error_debug; } -#endif #ifdef PS3_SYSTEM_BUS_DRIVER retval = ps3_ohci_driver_register(&PS3_SYSTEM_BUS_DRIVER); @@ -1247,18 +1285,6 @@ goto error_platform; #endif -#ifdef OMAP1_PLATFORM_DRIVER - retval = platform_driver_register(&OMAP1_PLATFORM_DRIVER); - if (retval < 0) - goto error_omap1_platform; -#endif - -#ifdef OMAP3_PLATFORM_DRIVER - retval = platform_driver_register(&OMAP3_PLATFORM_DRIVER); - if (retval < 0) - goto error_omap3_platform; -#endif - #ifdef OF_PLATFORM_DRIVER retval = platform_driver_register(&OF_PLATFORM_DRIVER); if (retval < 0) @@ -1271,12 +1297,6 @@ goto error_sa1111; #endif -#ifdef PCI_DRIVER - retval = pci_register_driver(&PCI_DRIVER); - if (retval < 0) - goto error_pci; -#endif - #ifdef SM501_OHCI_DRIVER retval = platform_driver_register(&SM501_OHCI_DRIVER); if (retval < 0) @@ -1289,79 +1309,19 @@ goto error_tmio; #endif -#ifdef S3C2410_PLATFORM_DRIVER - retval = platform_driver_register(&S3C2410_PLATFORM_DRIVER); - if (retval < 0) - goto error_s3c2410; -#endif - -#ifdef EXYNOS_PLATFORM_DRIVER - retval = platform_driver_register(&EXYNOS_PLATFORM_DRIVER); - if (retval < 0) - goto error_exynos; -#endif - -#ifdef EP93XX_PLATFORM_DRIVER - retval = platform_driver_register(&EP93XX_PLATFORM_DRIVER); - if (retval < 0) - goto error_ep93xx; -#endif - -#ifdef AT91_PLATFORM_DRIVER - retval = platform_driver_register(&AT91_PLATFORM_DRIVER); - if (retval < 0) - goto error_at91; -#endif - -#ifdef NXP_PLATFORM_DRIVER - retval = platform_driver_register(&NXP_PLATFORM_DRIVER); - if (retval < 0) - goto error_nxp; -#endif - #ifdef DAVINCI_PLATFORM_DRIVER retval = platform_driver_register(&DAVINCI_PLATFORM_DRIVER); if (retval < 0) goto error_davinci; #endif -#ifdef SPEAR_PLATFORM_DRIVER - retval = platform_driver_register(&SPEAR_PLATFORM_DRIVER); - if (retval < 0) - goto error_spear; -#endif - return retval; /* Error path */ -#ifdef SPEAR_PLATFORM_DRIVER - platform_driver_unregister(&SPEAR_PLATFORM_DRIVER); - error_spear: -#endif #ifdef DAVINCI_PLATFORM_DRIVER platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER); error_davinci: #endif -#ifdef NXP_PLATFORM_DRIVER - platform_driver_unregister(&NXP_PLATFORM_DRIVER); - error_nxp: -#endif -#ifdef AT91_PLATFORM_DRIVER - platform_driver_unregister(&AT91_PLATFORM_DRIVER); - error_at91: -#endif -#ifdef EP93XX_PLATFORM_DRIVER - platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); - error_ep93xx: -#endif -#ifdef EXYNOS_PLATFORM_DRIVER - platform_driver_unregister(&EXYNOS_PLATFORM_DRIVER); - error_exynos: -#endif -#ifdef S3C2410_PLATFORM_DRIVER - platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); - error_s3c2410: -#endif #ifdef TMIO_OHCI_DRIVER platform_driver_unregister(&TMIO_OHCI_DRIVER); error_tmio: @@ -1370,10 +1330,6 @@ platform_driver_unregister(&SM501_OHCI_DRIVER); error_sm501: #endif -#ifdef PCI_DRIVER - pci_unregister_driver(&PCI_DRIVER); - error_pci: -#endif #ifdef SA1111_DRIVER sa1111_driver_unregister(&SA1111_DRIVER); error_sa1111: @@ -1382,14 +1338,6 @@ platform_driver_unregister(&OF_PLATFORM_DRIVER); error_of_platform: #endif -#ifdef OMAP3_PLATFORM_DRIVER - platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); - error_omap3_platform: -#endif -#ifdef OMAP1_PLATFORM_DRIVER - platform_driver_unregister(&OMAP1_PLATFORM_DRIVER); - error_omap1_platform: -#endif #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); error_platform: @@ -1398,11 +1346,9 @@ ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); error_ps3: #endif -#ifdef DEBUG debugfs_remove(ohci_debug_root); ohci_debug_root = NULL; error_debug: -#endif clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); return retval; @@ -1411,57 +1357,28 @@ static void __exit ohci_hcd_mod_exit(void) { -#ifdef SPEAR_PLATFORM_DRIVER - platform_driver_unregister(&SPEAR_PLATFORM_DRIVER); -#endif #ifdef DAVINCI_PLATFORM_DRIVER platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER); #endif -#ifdef NXP_PLATFORM_DRIVER - platform_driver_unregister(&NXP_PLATFORM_DRIVER); -#endif -#ifdef AT91_PLATFORM_DRIVER - platform_driver_unregister(&AT91_PLATFORM_DRIVER); -#endif -#ifdef EP93XX_PLATFORM_DRIVER - platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); -#endif -#ifdef EXYNOS_PLATFORM_DRIVER - platform_driver_unregister(&EXYNOS_PLATFORM_DRIVER); -#endif -#ifdef S3C2410_PLATFORM_DRIVER - platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); -#endif #ifdef TMIO_OHCI_DRIVER platform_driver_unregister(&TMIO_OHCI_DRIVER); #endif #ifdef SM501_OHCI_DRIVER platform_driver_unregister(&SM501_OHCI_DRIVER); #endif -#ifdef PCI_DRIVER - pci_unregister_driver(&PCI_DRIVER); -#endif #ifdef SA1111_DRIVER sa1111_driver_unregister(&SA1111_DRIVER); #endif #ifdef OF_PLATFORM_DRIVER platform_driver_unregister(&OF_PLATFORM_DRIVER); #endif -#ifdef OMAP3_PLATFORM_DRIVER - platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); -#endif -#ifdef OMAP1_PLATFORM_DRIVER - platform_driver_unregister(&OMAP1_PLATFORM_DRIVER); -#endif #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); #endif #ifdef PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); #endif -#ifdef DEBUG debugfs_remove(ohci_debug_root); -#endif clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); } module_exit(ohci_hcd_mod_exit);