--- zzzz-none-000/linux-3.10.107/drivers/usb/phy/phy-isp1301-omap.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/usb/phy/phy-isp1301-omap.c	2021-02-04 17:41:59.000000000 +0000
@@ -40,9 +40,7 @@
 
 #include <mach/usb.h>
 
-#ifndef	DEBUG
-#undef	VERBOSE
-#endif
+#undef VERBOSE
 
 
 #define	DRIVER_VERSION	"24 August 2004"
@@ -96,7 +94,7 @@
 
 #if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
 
-#if	defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
+#if	defined(CONFIG_TPS65010) || (defined(CONFIG_TPS65010_MODULE) && defined(MODULE))
 
 #include <linux/i2c/tps65010.h>
 
@@ -236,7 +234,7 @@
 
 static inline const char *state_name(struct isp1301 *isp)
 {
-	return usb_otg_state_string(isp->phy.state);
+	return usb_otg_state_string(isp->phy.otg->state);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -251,7 +249,7 @@
 
 static void power_down(struct isp1301 *isp)
 {
-	isp->phy.state = OTG_STATE_UNDEFINED;
+	isp->phy.otg->state = OTG_STATE_UNDEFINED;
 
 	// isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
 	isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
@@ -341,7 +339,7 @@
 {
 	u32 l;
 
-	if (isp->phy.state == OTG_STATE_A_IDLE)
+	if (isp->phy.otg->state == OTG_STATE_A_IDLE)
 		return;
 
 	isp->phy.otg->default_a = 1;
@@ -353,7 +351,7 @@
 		isp->phy.otg->gadget->is_a_peripheral = 1;
 		gadget_suspend(isp);
 	}
-	isp->phy.state = OTG_STATE_A_IDLE;
+	isp->phy.otg->state = OTG_STATE_A_IDLE;
 	l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
 	omap_writel(l, OTG_CTRL);
 	isp->last_otg_ctrl = l;
@@ -365,7 +363,7 @@
 {
 	u32 l;
 
-	if (isp->phy.state == OTG_STATE_B_IDLE)
+	if (isp->phy.otg->state == OTG_STATE_B_IDLE)
 		return;
 
 	isp->phy.otg->default_a = 0;
@@ -377,7 +375,7 @@
 		isp->phy.otg->gadget->is_a_peripheral = 0;
 		gadget_suspend(isp);
 	}
-	isp->phy.state = OTG_STATE_B_IDLE;
+	isp->phy.otg->state = OTG_STATE_B_IDLE;
 	l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
 	omap_writel(l, OTG_CTRL);
 	isp->last_otg_ctrl = l;
@@ -387,7 +385,6 @@
 static void
 dump_regs(struct isp1301 *isp, const char *label)
 {
-#ifdef	DEBUG
 	u8	ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1);
 	u8	status = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
 	u8	src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
@@ -396,7 +393,6 @@
 		omap_readl(OTG_CTRL), label, state_name(isp),
 		ctrl, status, src);
 	/* mode control and irq enables don't change much */
-#endif
 }
 
 /*-------------------------------------------------------------------------*/
@@ -478,7 +474,7 @@
 	default:
 		break;
 	}
-	if (isp->phy.state == state && !extra)
+	if (isp->phy.otg->state == state && !extra)
 		return;
 	pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
 		usb_otg_state_string(state), fsm, state_name(isp),
@@ -502,23 +498,23 @@
 
 	if (int_src & INTR_SESS_VLD)
 		otg_ctrl |= OTG_ASESSVLD;
-	else if (isp->phy.state == OTG_STATE_A_WAIT_VFALL) {
+	else if (isp->phy.otg->state == OTG_STATE_A_WAIT_VFALL) {
 		a_idle(isp, "vfall");
 		otg_ctrl &= ~OTG_CTRL_BITS;
 	}
 	if (int_src & INTR_VBUS_VLD)
 		otg_ctrl |= OTG_VBUSVLD;
 	if (int_src & INTR_ID_GND) {		/* default-A */
-		if (isp->phy.state == OTG_STATE_B_IDLE
-				|| isp->phy.state
+		if (isp->phy.otg->state == OTG_STATE_B_IDLE
+				|| isp->phy.otg->state
 					== OTG_STATE_UNDEFINED) {
 			a_idle(isp, "init");
 			return;
 		}
 	} else {				/* default-B */
 		otg_ctrl |= OTG_ID;
-		if (isp->phy.state == OTG_STATE_A_IDLE
-			|| isp->phy.state == OTG_STATE_UNDEFINED) {
+		if (isp->phy.otg->state == OTG_STATE_A_IDLE
+			|| isp->phy.otg->state == OTG_STATE_UNDEFINED) {
 			b_idle(isp, "init");
 			return;
 		}
@@ -552,14 +548,14 @@
 	isp->last_otg_ctrl = otg_ctrl;
 	otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
 
-	switch (isp->phy.state) {
+	switch (isp->phy.otg->state) {
 	case OTG_STATE_B_IDLE:
 	case OTG_STATE_B_PERIPHERAL:
 	case OTG_STATE_B_SRP_INIT:
 		if (!(otg_ctrl & OTG_PULLUP)) {
 			// if (otg_ctrl & OTG_B_HNPEN) {
 			if (isp->phy.otg->gadget->b_hnp_enable) {
-				isp->phy.state = OTG_STATE_B_WAIT_ACON;
+				isp->phy.otg->state = OTG_STATE_B_WAIT_ACON;
 				pr_debug("  --> b_wait_acon\n");
 			}
 			goto pulldown;
@@ -589,7 +585,7 @@
 	if (!(isp->phy.otg->host))
 		otg_ctrl &= ~OTG_DRV_VBUS;
 
-	switch (isp->phy.state) {
+	switch (isp->phy.otg->state) {
 	case OTG_STATE_A_SUSPEND:
 		if (otg_ctrl & OTG_DRV_VBUS) {
 			set |= OTG1_VBUS_DRV;
@@ -600,7 +596,7 @@
 
 		/* FALLTHROUGH */
 	case OTG_STATE_A_VBUS_ERR:
-		isp->phy.state = OTG_STATE_A_WAIT_VFALL;
+		isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
 		pr_debug("  --> a_wait_vfall\n");
 		/* FALLTHROUGH */
 	case OTG_STATE_A_WAIT_VFALL:
@@ -609,7 +605,7 @@
 		break;
 	case OTG_STATE_A_IDLE:
 		if (otg_ctrl & OTG_DRV_VBUS) {
-			isp->phy.state = OTG_STATE_A_WAIT_VRISE;
+			isp->phy.otg->state = OTG_STATE_A_WAIT_VRISE;
 			pr_debug("  --> a_wait_vrise\n");
 		}
 		/* FALLTHROUGH */
@@ -629,17 +625,17 @@
 	if (otg_change & OTG_PULLUP) {
 		u32 l;
 
-		switch (isp->phy.state) {
+		switch (isp->phy.otg->state) {
 		case OTG_STATE_B_IDLE:
 			if (clr & OTG1_DP_PULLUP)
 				break;
-			isp->phy.state = OTG_STATE_B_PERIPHERAL;
+			isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
 			pr_debug("  --> b_peripheral\n");
 			break;
 		case OTG_STATE_A_SUSPEND:
 			if (clr & OTG1_DP_PULLUP)
 				break;
-			isp->phy.state = OTG_STATE_A_PERIPHERAL;
+			isp->phy.otg->state = OTG_STATE_A_PERIPHERAL;
 			pr_debug("  --> a_peripheral\n");
 			break;
 		default:
@@ -677,7 +673,7 @@
 		 * remote wakeup (SRP, normal) using their own timer
 		 * to give "check cable and A-device" messages.
 		 */
-		if (isp->phy.state == OTG_STATE_B_SRP_INIT)
+		if (isp->phy.otg->state == OTG_STATE_B_SRP_INIT)
 			b_idle(isp, "srp_timeout");
 
 		omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
@@ -695,7 +691,7 @@
 		omap_writel(otg_ctrl, OTG_CTRL);
 
 		/* subset of b_peripheral()... */
-		isp->phy.state = OTG_STATE_B_PERIPHERAL;
+		isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
 		pr_debug("  --> b_peripheral\n");
 
 		omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
@@ -707,7 +703,7 @@
 				state_name(isp), omap_readl(OTG_CTRL));
 
 		isp1301_defer_work(isp, WORK_UPDATE_OTG);
-		switch (isp->phy.state) {
+		switch (isp->phy.otg->state) {
 		case OTG_STATE_A_IDLE:
 			if (!otg->host)
 				break;
@@ -738,7 +734,7 @@
 		otg_ctrl |= OTG_BUSDROP;
 		otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
 		omap_writel(otg_ctrl, OTG_CTRL);
-		isp->phy.state = OTG_STATE_A_WAIT_VFALL;
+		isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
 
 		omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
 		ret = IRQ_HANDLED;
@@ -752,7 +748,7 @@
 		otg_ctrl |= OTG_BUSDROP;
 		otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
 		omap_writel(otg_ctrl, OTG_CTRL);
-		isp->phy.state = OTG_STATE_A_VBUS_ERR;
+		isp->phy.otg->state = OTG_STATE_A_VBUS_ERR;
 
 		omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
 		ret = IRQ_HANDLED;
@@ -773,7 +769,7 @@
 
 		/* role is peripheral */
 		if (otg_ctrl & OTG_DRIVER_SEL) {
-			switch (isp->phy.state) {
+			switch (isp->phy.otg->state) {
 			case OTG_STATE_A_IDLE:
 				b_idle(isp, __func__);
 				break;
@@ -790,18 +786,18 @@
 			}
 
 			if (otg->host) {
-				switch (isp->phy.state) {
+				switch (isp->phy.otg->state) {
 				case OTG_STATE_B_WAIT_ACON:
-					isp->phy.state = OTG_STATE_B_HOST;
+					isp->phy.otg->state = OTG_STATE_B_HOST;
 					pr_debug("  --> b_host\n");
 					kick = 1;
 					break;
 				case OTG_STATE_A_WAIT_BCON:
-					isp->phy.state = OTG_STATE_A_HOST;
+					isp->phy.otg->state = OTG_STATE_A_HOST;
 					pr_debug("  --> a_host\n");
 					break;
 				case OTG_STATE_A_PERIPHERAL:
-					isp->phy.state = OTG_STATE_A_WAIT_BCON;
+					isp->phy.otg->state = OTG_STATE_A_WAIT_BCON;
 					pr_debug("  --> a_wait_bcon\n");
 					break;
 				default:
@@ -882,7 +878,6 @@
 	.probe		= otg_probe,
 	.remove		= otg_remove,
 	.driver		= {
-		.owner	= THIS_MODULE,
 		.name	= "omap_otg",
 	},
 };
@@ -941,7 +936,7 @@
 	/* UDC driver just set OTG_BSESSVLD */
 	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP);
 	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN);
-	isp->phy.state = OTG_STATE_B_PERIPHERAL;
+	isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
 	pr_debug("  --> b_peripheral\n");
 	dump_regs(isp, "2periph");
 #endif
@@ -951,7 +946,7 @@
 {
 	struct usb_otg		*otg = isp->phy.otg;
 	u8			isp_stat, isp_bstat;
-	enum usb_otg_state	state = isp->phy.state;
+	enum usb_otg_state	state = isp->phy.otg->state;
 
 	if (stat & INTR_BDIS_ACON)
 		pr_debug("OTG:  BDIS_ACON, %s\n", state_name(isp));
@@ -974,7 +969,7 @@
 				 * when HNP is used.
 				 */
 				if (isp_stat & INTR_VBUS_VLD)
-					isp->phy.state = OTG_STATE_A_HOST;
+					isp->phy.otg->state = OTG_STATE_A_HOST;
 				break;
 			case OTG_STATE_A_WAIT_VFALL:
 				if (!(isp_stat & INTR_SESS_VLD))
@@ -982,7 +977,7 @@
 				break;
 			default:
 				if (!(isp_stat & INTR_VBUS_VLD))
-					isp->phy.state = OTG_STATE_A_VBUS_ERR;
+					isp->phy.otg->state = OTG_STATE_A_VBUS_ERR;
 				break;
 			}
 			isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
@@ -1011,11 +1006,11 @@
 		if (otg->default_a) {
 			switch (state) {
 			default:
-				isp->phy.state = OTG_STATE_A_WAIT_VFALL;
+				isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
 				break;
 			case OTG_STATE_A_WAIT_VFALL:
 				state = OTG_STATE_A_IDLE;
-				/* khubd may take a while to notice and
+				/* hub_wq may take a while to notice and
 				 * handle this disconnect, so don't go
 				 * to B_IDLE quite yet.
 				 */
@@ -1024,7 +1019,7 @@
 				host_suspend(isp);
 				isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
 						MC1_BDIS_ACON_EN);
-				isp->phy.state = OTG_STATE_B_IDLE;
+				isp->phy.otg->state = OTG_STATE_B_IDLE;
 				l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
 				l &= ~OTG_CTRL_BITS;
 				omap_writel(l, OTG_CTRL);
@@ -1035,7 +1030,7 @@
 		}
 		isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
 
-		switch (isp->phy.state) {
+		switch (isp->phy.otg->state) {
 		case OTG_STATE_B_PERIPHERAL:
 		case OTG_STATE_B_WAIT_ACON:
 		case OTG_STATE_B_HOST:
@@ -1075,7 +1070,7 @@
 		}
 	}
 
-	if (state != isp->phy.state)
+	if (state != isp->phy.otg->state)
 		pr_debug("  isp, %s -> %s\n",
 				usb_otg_state_string(state), state_name(isp));
 
@@ -1133,10 +1128,10 @@
 			 * skip A_WAIT_VRISE; hc transitions invisibly
 			 * skip A_WAIT_BCON; same.
 			 */
-			switch (isp->phy.state) {
+			switch (isp->phy.otg->state) {
 			case OTG_STATE_A_WAIT_BCON:
 			case OTG_STATE_A_WAIT_VRISE:
-				isp->phy.state = OTG_STATE_A_HOST;
+				isp->phy.otg->state = OTG_STATE_A_HOST;
 				pr_debug("  --> a_host\n");
 				otg_ctrl = omap_readl(OTG_CTRL);
 				otg_ctrl |= OTG_A_BUSREQ;
@@ -1145,7 +1140,7 @@
 				omap_writel(otg_ctrl, OTG_CTRL);
 				break;
 			case OTG_STATE_B_WAIT_ACON:
-				isp->phy.state = OTG_STATE_B_HOST;
+				isp->phy.otg->state = OTG_STATE_B_HOST;
 				pr_debug("  --> b_host (acon)\n");
 				break;
 			case OTG_STATE_B_HOST:
@@ -1279,9 +1274,9 @@
 static int
 isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
-	struct isp1301	*isp = container_of(otg->phy, struct isp1301, phy);
+	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
 
-	if (!otg || isp != the_transceiver)
+	if (isp != the_transceiver)
 		return -ENODEV;
 
 	if (!host) {
@@ -1335,9 +1330,9 @@
 static int
 isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
 {
-	struct isp1301	*isp = container_of(otg->phy, struct isp1301, phy);
+	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
 
-	if (!otg || isp != the_transceiver)
+	if (isp != the_transceiver)
 		return -ENODEV;
 
 	if (!gadget) {
@@ -1372,7 +1367,7 @@
 	}
 
 	power_up(isp);
-	isp->phy.state = OTG_STATE_B_IDLE;
+	isp->phy.otg->state = OTG_STATE_B_IDLE;
 
 	if (machine_is_omap_h2() || machine_is_omap_h3())
 		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
@@ -1407,7 +1402,7 @@
 {
 	if (!the_transceiver)
 		return -ENODEV;
-	if (dev->state == OTG_STATE_B_PERIPHERAL)
+	if (dev->otg->state == OTG_STATE_B_PERIPHERAL)
 		enable_vbus_draw(the_transceiver, mA);
 	return 0;
 }
@@ -1415,11 +1410,10 @@
 static int
 isp1301_start_srp(struct usb_otg *otg)
 {
-	struct isp1301	*isp = container_of(otg->phy, struct isp1301, phy);
+	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
 	u32		otg_ctrl;
 
-	if (!otg || isp != the_transceiver
-			|| isp->phy.state != OTG_STATE_B_IDLE)
+	if (isp != the_transceiver || isp->phy.otg->state != OTG_STATE_B_IDLE)
 		return -ENODEV;
 
 	otg_ctrl = omap_readl(OTG_CTRL);
@@ -1429,7 +1423,7 @@
 	otg_ctrl |= OTG_B_BUSREQ;
 	otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
 	omap_writel(otg_ctrl, OTG_CTRL);
-	isp->phy.state = OTG_STATE_B_SRP_INIT;
+	isp->phy.otg->state = OTG_STATE_B_SRP_INIT;
 
 	pr_debug("otg: SRP, %s ... %06x\n", state_name(isp),
 			omap_readl(OTG_CTRL));
@@ -1443,10 +1437,10 @@
 isp1301_start_hnp(struct usb_otg *otg)
 {
 #ifdef	CONFIG_USB_OTG
-	struct isp1301	*isp = container_of(otg->phy, struct isp1301, phy);
+	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
 	u32 l;
 
-	if (!otg || isp != the_transceiver)
+	if (isp != the_transceiver)
 		return -ENODEV;
 	if (otg->default_a && (otg->host == NULL || !otg->host->b_hnp_enable))
 		return -ENOTCONN;
@@ -1457,9 +1451,9 @@
 	/* We want hardware to manage most HNP protocol timings.
 	 * So do this part as early as possible...
 	 */
-	switch (isp->phy.state) {
+	switch (isp->phy.otg->state) {
 	case OTG_STATE_B_HOST:
-		isp->phy.state = OTG_STATE_B_PERIPHERAL;
+		isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
 		/* caller will suspend next */
 		break;
 	case OTG_STATE_A_HOST:
@@ -1588,7 +1582,7 @@
 	isp->phy.label = DRIVER_NAME;
 	isp->phy.set_power = isp1301_set_power,
 
-	isp->phy.otg->phy = &isp->phy;
+	isp->phy.otg->usb_phy = &isp->phy;
 	isp->phy.otg->set_host = isp1301_set_host,
 	isp->phy.otg->set_peripheral = isp1301_set_peripheral,
 	isp->phy.otg->start_srp = isp1301_start_srp,