--- zzzz-none-000/linux-3.10.107/drivers/usb/serial/cp210x.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/usb/serial/cp210x.c	2021-02-04 17:41:59.000000000 +0000
@@ -117,6 +117,7 @@
 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
 	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+	{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
 	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 	{ USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
 	{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
@@ -129,6 +130,7 @@
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
+	{ USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */
 	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
 	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
@@ -169,6 +171,8 @@
 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
 	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */
+	{ USB_DEVICE(0x1901, 0x0195) },	/* GE B850/B650/B450 CP2104 DP UART interface */
+	{ USB_DEVICE(0x1901, 0x0196) },	/* GE B850 CP2105 DP UART interface */
 	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
@@ -328,10 +332,8 @@
 	length = (((size - 1) | 3) + 1) / 4;
 
 	buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
-	if (!buf) {
-		dev_err(&port->dev, "%s - out of memory.\n", __func__);
+	if (!buf)
 		return -ENOMEM;
-	}
 
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
@@ -375,10 +377,8 @@
 	length = (((size - 1) | 3) + 1) / 4;
 
 	buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
-	if (!buf) {
-		dev_err(&port->dev, "%s - out of memory.\n", __func__);
+	if (!buf)
 		return -ENOMEM;
-	}
 
 	/* Array of integers into bytes */
 	for (i = 0; i < length; i++)
@@ -693,11 +693,6 @@
 	unsigned int bits;
 	unsigned int modem_ctl[4];
 
-	dev_dbg(dev, "%s - port %d\n", __func__, port->number);
-
-	if (!tty)
-		return;
-
 	cflag = tty->termios.c_cflag;
 	old_cflag = old_termios->c_cflag;
 
@@ -888,9 +883,6 @@
 	struct usb_host_interface *cur_altsetting;
 	struct cp210x_serial_private *spriv;
 
-	/* cp210x buffers behave strangely unless device is reset */
-	usb_reset_device(serial->dev);
-
 	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
 	if (!spriv)
 		return -ENOMEM;