--- zzzz-none-000/linux-3.10.107/include/linux/clocksource.h 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/include/linux/clocksource.h 2021-02-04 17:41:59.000000000 +0000 @@ -18,115 +18,14 @@ #include #include -/* clocksource cycle base type */ -typedef u64 cycle_t; struct clocksource; +struct module; #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA #include #endif /** - * struct cyclecounter - hardware abstraction for a free running counter - * Provides completely state-free accessors to the underlying hardware. - * Depending on which hardware it reads, the cycle counter may wrap - * around quickly. Locking rules (if necessary) have to be defined - * by the implementor and user of specific instances of this API. - * - * @read: returns the current cycle value - * @mask: bitmask for two's complement - * subtraction of non 64 bit counters, - * see CLOCKSOURCE_MASK() helper macro - * @mult: cycle to nanosecond multiplier - * @shift: cycle to nanosecond divisor (power of two) - */ -struct cyclecounter { - cycle_t (*read)(const struct cyclecounter *cc); - cycle_t mask; - u32 mult; - u32 shift; -}; - -/** - * struct timecounter - layer above a %struct cyclecounter which counts nanoseconds - * Contains the state needed by timecounter_read() to detect - * cycle counter wrap around. Initialize with - * timecounter_init(). Also used to convert cycle counts into the - * corresponding nanosecond counts with timecounter_cyc2time(). Users - * of this code are responsible for initializing the underlying - * cycle counter hardware, locking issues and reading the time - * more often than the cycle counter wraps around. The nanosecond - * counter will only wrap around after ~585 years. - * - * @cc: the cycle counter used by this instance - * @cycle_last: most recent cycle counter value seen by - * timecounter_read() - * @nsec: continuously increasing count - */ -struct timecounter { - const struct cyclecounter *cc; - cycle_t cycle_last; - u64 nsec; -}; - -/** - * cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds - * @cc: Pointer to cycle counter. - * @cycles: Cycles - * - * XXX - This could use some mult_lxl_ll() asm optimization. Same code - * as in cyc2ns, but with unsigned result. - */ -static inline u64 cyclecounter_cyc2ns(const struct cyclecounter *cc, - cycle_t cycles) -{ - u64 ret = (u64)cycles; - ret = (ret * cc->mult) >> cc->shift; - return ret; -} - -/** - * timecounter_init - initialize a time counter - * @tc: Pointer to time counter which is to be initialized/reset - * @cc: A cycle counter, ready to be used. - * @start_tstamp: Arbitrary initial time stamp. - * - * After this call the current cycle register (roughly) corresponds to - * the initial time stamp. Every call to timecounter_read() increments - * the time stamp counter by the number of elapsed nanoseconds. - */ -extern void timecounter_init(struct timecounter *tc, - const struct cyclecounter *cc, - u64 start_tstamp); - -/** - * timecounter_read - return nanoseconds elapsed since timecounter_init() - * plus the initial time stamp - * @tc: Pointer to time counter. - * - * In other words, keeps track of time since the same epoch as - * the function which generated the initial time stamp. - */ -extern u64 timecounter_read(struct timecounter *tc); - -/** - * timecounter_cyc2time - convert a cycle counter to same - * time base as values returned by - * timecounter_read() - * @tc: Pointer to time counter. - * @cycle_tstamp: a value returned by tc->cc->read() - * - * Cycle counts that are converted correctly as long as they - * fall into the interval [-1/2 max cycle count, +1/2 max cycle count], - * with "max cycle count" == cs->mask+1. - * - * This allows conversion of cycle counter values which were generated - * in the past. - */ -extern u64 timecounter_cyc2time(struct timecounter *tc, - cycle_t cycle_tstamp); - -/** * struct clocksource - hardware abstraction for a free running counter * Provides mostly state-free accessors to the underlying hardware. * This is the structure used for system time. @@ -157,11 +56,12 @@ * @shift: cycle to nanosecond divisor (power of two) * @max_idle_ns: max idle time permitted by the clocksource (nsecs) * @maxadj: maximum adjustment value to mult (~11%) + * @max_cycles: maximum safe cycle value which won't overflow on multiplication * @flags: flags describing special properties * @archdata: arch-specific data * @suspend: suspend function for the clocksource, if necessary * @resume: resume function for the clocksource, if necessary - * @cycle_last: most recent cycle counter value seen by ::read() + * @owner: module reference, must be set by clocksource in modules */ struct clocksource { /* @@ -169,7 +69,6 @@ * clocksource itself is cacheline aligned. */ cycle_t (*read)(struct clocksource *cs); - cycle_t cycle_last; cycle_t mask; u32 mult; u32 shift; @@ -178,7 +77,7 @@ #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA struct arch_clocksource_data archdata; #endif - + u64 max_cycles; const char *name; struct list_head list; int rating; @@ -195,6 +94,7 @@ cycle_t cs_last; cycle_t wd_last; #endif + struct module *owner; } ____cacheline_aligned; /* @@ -207,6 +107,7 @@ #define CLOCK_SOURCE_VALID_FOR_HRES 0x20 #define CLOCK_SOURCE_UNSTABLE 0x40 #define CLOCK_SOURCE_SUSPEND_NONSTOP 0x80 +#define CLOCK_SOURCE_RESELECT 0x100 /* simplify initialization of mask field */ #define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1) @@ -278,16 +179,16 @@ } -extern int clocksource_register(struct clocksource*); -extern void clocksource_unregister(struct clocksource*); +extern int clocksource_unregister(struct clocksource*); extern void clocksource_touch_watchdog(void); -extern struct clocksource* clocksource_get_next(void); extern void clocksource_change_rating(struct clocksource *cs, int rating); extern void clocksource_suspend(void); extern void clocksource_resume(void); extern struct clocksource * __init clocksource_default_clock(void); extern void clocksource_mark_unstable(struct clocksource *cs); +extern u64 +clocks_calc_max_nsecs(u32 mult, u32 shift, u32 maxadj, u64 mask, u64 *max_cycles); extern void clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec); @@ -298,7 +199,16 @@ extern int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq); extern void -__clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq); +__clocksource_update_freq_scale(struct clocksource *cs, u32 scale, u32 freq); + +/* + * Don't call this unless you are a default clocksource + * (AKA: jiffies) and absolutely have to. + */ +static inline int __clocksource_register(struct clocksource *cs) +{ + return __clocksource_register_scale(cs, 1, 0); +} static inline int clocksource_register_hz(struct clocksource *cs, u32 hz) { @@ -310,18 +220,18 @@ return __clocksource_register_scale(cs, 1000, khz); } -static inline void __clocksource_updatefreq_hz(struct clocksource *cs, u32 hz) +static inline void __clocksource_update_freq_hz(struct clocksource *cs, u32 hz) { - __clocksource_updatefreq_scale(cs, 1, hz); + __clocksource_update_freq_scale(cs, 1, hz); } -static inline void __clocksource_updatefreq_khz(struct clocksource *cs, u32 khz) +static inline void __clocksource_update_freq_khz(struct clocksource *cs, u32 khz) { - __clocksource_updatefreq_scale(cs, 1000, khz); + __clocksource_update_freq_scale(cs, 1000, khz); } -extern void timekeeping_notify(struct clocksource *clock); +extern int timekeeping_notify(struct clocksource *clock); extern cycle_t clocksource_mmio_readl_up(struct clocksource *); extern cycle_t clocksource_mmio_readl_down(struct clocksource *); @@ -333,23 +243,16 @@ extern int clocksource_i8253_init(void); -struct device_node; -typedef void(*clocksource_of_init_fn)(struct device_node *); -#ifdef CONFIG_CLKSRC_OF -extern void clocksource_of_init(void); - -#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \ - static const struct of_device_id __clksrc_of_table_##name \ - __used __section(__clksrc_of_table) \ - = { .compatible = compat, \ - .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn } +#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \ + OF_DECLARE_1(clksrc, name, compat, fn) + +#ifdef CONFIG_CLKSRC_PROBE +extern void clocksource_probe(void); #else -static inline void clocksource_of_init(void) {} -#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \ - static const struct of_device_id __clksrc_of_table_##name \ - __attribute__((unused)) \ - = { .compatible = compat, \ - .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn } +static inline void clocksource_probe(void) {} #endif +#define CLOCKSOURCE_ACPI_DECLARE(name, table_id, fn) \ + ACPI_DECLARE_PROBE_ENTRY(clksrc, name, table_id, 0, NULL, 0, fn) + #endif /* _LINUX_CLOCKSOURCE_H */