--- zzzz-none-000/linux-3.10.107/include/linux/extcon.h 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/include/linux/extcon.h 2021-02-04 17:41:59.000000000 +0000 @@ -1,6 +1,9 @@ /* * External connector (extcon) class driver * + * Copyright (C) 2015 Samsung Electronics + * Author: Chanwoo Choi + * * Copyright (C) 2012 Samsung Electronics * Author: Donggeun Kim * Author: MyungJoo Ham @@ -24,61 +27,54 @@ #define __LINUX_EXTCON_H__ #include -#include -#include - -#define SUPPORTED_CABLE_MAX 32 -#define CABLE_NAME_MAX 30 /* - * The standard cable name is to help support general notifier - * and notifiee device drivers to share the common names. - * Please use standard cable names unless your notifier device has - * a very unique and abnormal cable or - * the cable type is supposed to be used with only one unique - * pair of notifier/notifiee devices. - * - * Please add any other "standard" cables used with extcon dev. - * - * You may add a dot and number to specify version or specification - * of the specific cable if it is required. (e.g., "Fast-charger.18" - * and "Fast-charger.10" for 1.8A and 1.0A chargers) - * However, the notifiee and notifier should be able to handle such - * string and if the notifiee can negotiate the protocol or identify, - * you don't need such convention. This convention is helpful when - * notifier can distinguish but notifiee cannot. - */ -enum extcon_cable_name { - EXTCON_USB = 0, - EXTCON_USB_HOST, - EXTCON_TA, /* Travel Adaptor */ - EXTCON_FAST_CHARGER, - EXTCON_SLOW_CHARGER, - EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */ - EXTCON_HDMI, - EXTCON_MHL, - EXTCON_DVI, - EXTCON_VGA, - EXTCON_DOCK, - EXTCON_LINE_IN, - EXTCON_LINE_OUT, - EXTCON_MIC_IN, - EXTCON_HEADPHONE_OUT, - EXTCON_SPDIF_IN, - EXTCON_SPDIF_OUT, - EXTCON_VIDEO_IN, - EXTCON_VIDEO_OUT, - EXTCON_MECHANICAL, -}; -extern const char extcon_cable_name[][CABLE_NAME_MAX + 1]; + * Define the unique id of supported external connectors + */ +#define EXTCON_NONE 0 + +/* USB external connector */ +#define EXTCON_USB 1 +#define EXTCON_USB_HOST 2 + +/* Charging external connector */ +#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ +#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ +#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ +#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */ +#define EXTCON_CHG_USB_FAST 9 +#define EXTCON_CHG_USB_SLOW 10 + +/* Jack external connector */ +#define EXTCON_JACK_MICROPHONE 20 +#define EXTCON_JACK_HEADPHONE 21 +#define EXTCON_JACK_LINE_IN 22 +#define EXTCON_JACK_LINE_OUT 23 +#define EXTCON_JACK_VIDEO_IN 24 +#define EXTCON_JACK_VIDEO_OUT 25 +#define EXTCON_JACK_SPDIF_IN 26 /* Sony Philips Digital InterFace */ +#define EXTCON_JACK_SPDIF_OUT 27 + +/* Display external connector */ +#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */ +#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */ +#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */ +#define EXTCON_DISP_VGA 43 /* Video Graphics Array */ + +/* Miscellaneous external connector */ +#define EXTCON_DOCK 60 +#define EXTCON_JIG 61 +#define EXTCON_MECHANICAL 62 + +#define EXTCON_NUM 63 struct extcon_cable; /** * struct extcon_dev - An extcon device represents one external connector. - * @name: The name of this extcon device. Parent device name is used - * if NULL. - * @supported_cable: Array of supported cable names ending with NULL. + * @name: The name of this extcon device. Parent device name is + * used if NULL. + * @supported_cable: Array of supported cable names ending with EXTCON_NONE. * If supported_cable is NULL, cable name related APIs * are disabled. * @mutually_exclusive: Array of mutually exclusive set of cables that cannot @@ -89,21 +85,17 @@ * be attached simulataneously. {0x7, 0} is equivalent to * {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there * can be no simultaneous connections. - * @print_name: An optional callback to override the method to print the - * name of the extcon device. - * @print_state: An optional callback to override the method to print the - * status of the extcon device. - * @dev: Device of this extcon. Do not provide at register-time. - * @state: Attach/detach state of this extcon. Do not provide at - * register-time - * @nh: Notifier for the state change events from this extcon - * @entry: To support list of extcon devices so that users can search - * for extcon devices based on the extcon name. + * @dev: Device of this extcon. + * @state: Attach/detach state of this extcon. Do not provide at + * register-time. + * @nh: Notifier for the state change events from this extcon + * @entry: To support list of extcon devices so that users can + * search for extcon devices based on the extcon name. * @lock: * @max_supported: Internal value to store the number of cables. * @extcon_dev_type: Device_type struct to provide attribute_groups * customized for each extcon device. - * @cables: Sysfs subdirectories. Each represents one cable. + * @cables: Sysfs subdirectories. Each represents one cable. * * In most cases, users only need to provide "User initializing data" of * this struct when registering an extcon. In some exceptional cases, @@ -111,26 +103,23 @@ * are overwritten by register function. */ struct extcon_dev { - /* --- Optional user initializing data --- */ - const char *name; - const char **supported_cable; - const u32 *mutually_exclusive; - - /* --- Optional callbacks to override class functions --- */ - ssize_t (*print_name)(struct extcon_dev *edev, char *buf); - ssize_t (*print_state)(struct extcon_dev *edev, char *buf); - - /* --- Internal data. Please do not set. --- */ - struct device *dev; - u32 state; - struct raw_notifier_head nh; + /* Optional user initializing data */ + const char *name; + const unsigned int *supported_cable; + const u32 *mutually_exclusive; + + /* Internal data. Please do not set. */ + struct device dev; + struct raw_notifier_head *nh; struct list_head entry; - spinlock_t lock; /* could be called by irq handler */ int max_supported; + spinlock_t lock; /* could be called by irq handler */ + u32 state; /* /sys/class/extcon/.../cable.n/... */ struct device_type extcon_dev_type; struct extcon_cable *cables; + /* /sys/class/extcon/.../mutually_exclusive/... */ struct attribute_group attr_g_muex; struct attribute **attrs_muex; @@ -138,13 +127,13 @@ }; /** - * struct extcon_cable - An internal data for each cable of extcon device. - * @edev: The extcon device + * struct extcon_cable - An internal data for each cable of extcon device. + * @edev: The extcon device * @cable_index: Index of this cable in the edev - * @attr_g: Attribute group for the cable - * @attr_name: "name" sysfs entry - * @attr_state: "state" sysfs entry - * @attrs: Array pointing to attr_name and attr_state for attr_g + * @attr_g: Attribute group for the cable + * @attr_name: "name" sysfs entry + * @attr_state: "state" sysfs entry + * @attrs: Array pointing to attr_name and attr_state for attr_g */ struct extcon_cable { struct extcon_dev *edev; @@ -159,15 +148,14 @@ /** * struct extcon_specific_cable_nb - An internal data for - * extcon_register_interest(). - * @internal_nb: a notifier block bridging extcon notifier and cable notifier. - * @user_nb: user provided notifier block for events from a specific cable. + * extcon_register_interest(). + * @user_nb: user provided notifier block for events from + * a specific cable. * @cable_index: the target cable. - * @edev: the target extcon device. + * @edev: the target extcon device. * @previous_value: the saved previous event value. */ struct extcon_specific_cable_nb { - struct notifier_block internal_nb; struct notifier_block *user_nb; int cable_index; struct extcon_dev *edev; @@ -180,11 +168,24 @@ * Following APIs are for notifiers or configurations. * Notifiers are the external port and connection devices. */ -extern int extcon_dev_register(struct extcon_dev *edev, struct device *dev); +extern int extcon_dev_register(struct extcon_dev *edev); extern void extcon_dev_unregister(struct extcon_dev *edev); +extern int devm_extcon_dev_register(struct device *dev, + struct extcon_dev *edev); +extern void devm_extcon_dev_unregister(struct device *dev, + struct extcon_dev *edev); extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name); /* + * Following APIs control the memory of extcon device. + */ +extern struct extcon_dev *extcon_dev_allocate(const unsigned int *cable); +extern void extcon_dev_free(struct extcon_dev *edev); +extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, + const unsigned int *cable); +extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev); + +/* * get/set/update_state access the 32b encoded state value, which represents * states of all possible cables of the multistate port. For example, if one * calls extcon_set_state(edev, 0x7), it may mean that all the three cables @@ -200,13 +201,10 @@ /* * get/set_cable_state access each bit of the 32b encoded state value. - * They are used to access the status of each cable based on the cable_name - * or cable_index, which is retrieved by extcon_find_cable_index + * They are used to access the status of each cable based on the cable_name. */ -extern int extcon_find_cable_index(struct extcon_dev *sdev, - const char *cable_name); -extern int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index); -extern int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index, +extern int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id); +extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id, bool cable_state); extern int extcon_get_cable_state(struct extcon_dev *edev, @@ -233,19 +231,53 @@ * we do not recommend to use this for normal 'notifiee' device drivers who * want to be notified by a specific external port of the notifier. */ -extern int extcon_register_notifier(struct extcon_dev *edev, +extern int extcon_register_notifier(struct extcon_dev *edev, unsigned int id, + struct notifier_block *nb); +extern int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id, struct notifier_block *nb); -extern int extcon_unregister_notifier(struct extcon_dev *edev, - struct notifier_block *nb); + +/* + * Following API get the extcon device from devicetree. + * This function use phandle of devicetree to get extcon device directly. + */ +extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, + int index); + +/* Following API to get information of extcon device */ +extern const char *extcon_get_edev_name(struct extcon_dev *edev); + #else /* CONFIG_EXTCON */ -static inline int extcon_dev_register(struct extcon_dev *edev, - struct device *dev) +static inline int extcon_dev_register(struct extcon_dev *edev) { return 0; } static inline void extcon_dev_unregister(struct extcon_dev *edev) { } +static inline int devm_extcon_dev_register(struct device *dev, + struct extcon_dev *edev) +{ + return -EINVAL; +} + +static inline void devm_extcon_dev_unregister(struct device *dev, + struct extcon_dev *edev) { } + +static inline struct extcon_dev *extcon_dev_allocate(const unsigned int *cable) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void extcon_dev_free(struct extcon_dev *edev) { } + +static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, + const unsigned int *cable) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void devm_extcon_dev_free(struct extcon_dev *edev) { } + static inline u32 extcon_get_state(struct extcon_dev *edev) { return 0; @@ -262,20 +294,14 @@ return 0; } -static inline int extcon_find_cable_index(struct extcon_dev *edev, - const char *cable_name) -{ - return 0; -} - static inline int extcon_get_cable_state_(struct extcon_dev *edev, - int cable_index) + unsigned int id) { return 0; } static inline int extcon_set_cable_state_(struct extcon_dev *edev, - int cable_index, bool cable_state) + unsigned int id, bool cable_state) { return 0; } @@ -298,13 +324,15 @@ } static inline int extcon_register_notifier(struct extcon_dev *edev, - struct notifier_block *nb) + unsigned int id, + struct notifier_block *nb) { return 0; } static inline int extcon_unregister_notifier(struct extcon_dev *edev, - struct notifier_block *nb) + unsigned int id, + struct notifier_block *nb) { return 0; } @@ -322,5 +350,11 @@ { return 0; } + +static inline struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, + int index) +{ + return ERR_PTR(-ENODEV); +} #endif /* CONFIG_EXTCON */ #endif /* __LINUX_EXTCON_H__ */