--- zzzz-none-000/linux-3.10.107/include/linux/ktime.h	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/include/linux/ktime.h	2021-02-04 17:41:59.000000000 +0000
@@ -27,57 +27,32 @@
 /*
  * ktime_t:
  *
- * On 64-bit CPUs a single 64-bit variable is used to store the hrtimers
+ * A single 64-bit variable is used to store the hrtimers
  * internal representation of time values in scalar nanoseconds. The
  * design plays out best on 64-bit CPUs, where most conversions are
  * NOPs and most arithmetic ktime_t operations are plain arithmetic
  * operations.
  *
- * On 32-bit CPUs an optimized representation of the timespec structure
- * is used to avoid expensive conversions from and to timespecs. The
- * endian-aware order of the tv struct members is chosen to allow
- * mathematical operations on the tv64 member of the union too, which
- * for certain operations produces better code.
- *
- * For architectures with efficient support for 64/32-bit conversions the
- * plain scalar nanosecond based representation can be selected by the
- * config switch CONFIG_KTIME_SCALAR.
  */
 union ktime {
 	s64	tv64;
-#if BITS_PER_LONG != 64 && !defined(CONFIG_KTIME_SCALAR)
-	struct {
-# ifdef __BIG_ENDIAN
-	s32	sec, nsec;
-# else
-	s32	nsec, sec;
-# endif
-	} tv;
-#endif
 };
 
 typedef union ktime ktime_t;		/* Kill this */
 
-/*
- * ktime_t definitions when using the 64-bit scalar representation:
- */
-
-#if (BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)
-
 /**
  * ktime_set - Set a ktime_t variable from a seconds/nanoseconds value
  * @secs:	seconds to set
  * @nsecs:	nanoseconds to set
  *
- * Return the ktime_t representation of the value
+ * Return: The ktime_t representation of the value.
  */
-static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
+static inline ktime_t ktime_set(const s64 secs, const unsigned long nsecs)
 {
-#if (BITS_PER_LONG == 64)
 	if (unlikely(secs >= KTIME_SEC_MAX))
 		return (ktime_t){ .tv64 = KTIME_MAX };
-#endif
-	return (ktime_t) { .tv64 = (s64)secs * NSEC_PER_SEC + (s64)nsecs };
+
+	return (ktime_t) { .tv64 = secs * NSEC_PER_SEC + (s64)nsecs };
 }
 
 /* Subtract two ktime_t variables. rem = lhs -rhs: */
@@ -108,6 +83,12 @@
 	return ktime_set(ts.tv_sec, ts.tv_nsec);
 }
 
+/* convert a timespec64 to ktime_t format: */
+static inline ktime_t timespec64_to_ktime(struct timespec64 ts)
+{
+	return ktime_set(ts.tv_sec, ts.tv_nsec);
+}
+
 /* convert a timeval to ktime_t format: */
 static inline ktime_t timeval_to_ktime(struct timeval tv)
 {
@@ -117,200 +98,112 @@
 /* Map the ktime_t to timespec conversion to ns_to_timespec function */
 #define ktime_to_timespec(kt)		ns_to_timespec((kt).tv64)
 
+/* Map the ktime_t to timespec conversion to ns_to_timespec function */
+#define ktime_to_timespec64(kt)		ns_to_timespec64((kt).tv64)
+
 /* Map the ktime_t to timeval conversion to ns_to_timeval function */
 #define ktime_to_timeval(kt)		ns_to_timeval((kt).tv64)
 
 /* Convert ktime_t to nanoseconds - NOP in the scalar storage format: */
 #define ktime_to_ns(kt)			((kt).tv64)
 
-#else	/* !((BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)) */
-
-/*
- * Helper macros/inlines to get the ktime_t math right in the timespec
- * representation. The macros are sometimes ugly - their actual use is
- * pretty okay-ish, given the circumstances. We do all this for
- * performance reasons. The pure scalar nsec_t based code was nice and
- * simple, but created too many 64-bit / 32-bit conversions and divisions.
- *
- * Be especially aware that negative values are represented in a way
- * that the tv.sec field is negative and the tv.nsec field is greater
- * or equal to zero but less than nanoseconds per second. This is the
- * same representation which is used by timespecs.
- *
- *   tv.sec < 0 and 0 >= tv.nsec < NSEC_PER_SEC
- */
-
-/* Set a ktime_t variable to a value in sec/nsec representation: */
-static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
-{
-	return (ktime_t) { .tv = { .sec = secs, .nsec = nsecs } };
-}
 
 /**
- * ktime_sub - subtract two ktime_t variables
- * @lhs:	minuend
- * @rhs:	subtrahend
- *
- * Returns the remainder of the subtraction
- */
-static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs)
-{
-	ktime_t res;
-
-	res.tv64 = lhs.tv64 - rhs.tv64;
-	if (res.tv.nsec < 0)
-		res.tv.nsec += NSEC_PER_SEC;
-
-	return res;
-}
-
-/**
- * ktime_add - add two ktime_t variables
- * @add1:	addend1
- * @add2:	addend2
- *
- * Returns the sum of @add1 and @add2.
- */
-static inline ktime_t ktime_add(const ktime_t add1, const ktime_t add2)
-{
-	ktime_t res;
-
-	res.tv64 = add1.tv64 + add2.tv64;
-	/*
-	 * performance trick: the (u32) -NSEC gives 0x00000000Fxxxxxxx
-	 * so we subtract NSEC_PER_SEC and add 1 to the upper 32 bit.
-	 *
-	 * it's equivalent to:
-	 *   tv.nsec -= NSEC_PER_SEC
-	 *   tv.sec ++;
-	 */
-	if (res.tv.nsec >= NSEC_PER_SEC)
-		res.tv64 += (u32)-NSEC_PER_SEC;
-
-	return res;
-}
-
-/**
- * ktime_add_ns - Add a scalar nanoseconds value to a ktime_t variable
- * @kt:		addend
- * @nsec:	the scalar nsec value to add
- *
- * Returns the sum of @kt and @nsec in ktime_t format
- */
-extern ktime_t ktime_add_ns(const ktime_t kt, u64 nsec);
-
-/**
- * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable
- * @kt:		minuend
- * @nsec:	the scalar nsec value to subtract
+ * ktime_equal - Compares two ktime_t variables to see if they are equal
+ * @cmp1:	comparable1
+ * @cmp2:	comparable2
  *
- * Returns the subtraction of @nsec from @kt in ktime_t format
- */
-extern ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec);
-
-/**
- * timespec_to_ktime - convert a timespec to ktime_t format
- * @ts:		the timespec variable to convert
+ * Compare two ktime_t variables.
  *
- * Returns a ktime_t variable with the converted timespec value
+ * Return: 1 if equal.
  */
-static inline ktime_t timespec_to_ktime(const struct timespec ts)
+static inline int ktime_equal(const ktime_t cmp1, const ktime_t cmp2)
 {
-	return (ktime_t) { .tv = { .sec = (s32)ts.tv_sec,
-			   	   .nsec = (s32)ts.tv_nsec } };
+	return cmp1.tv64 == cmp2.tv64;
 }
 
 /**
- * timeval_to_ktime - convert a timeval to ktime_t format
- * @tv:		the timeval variable to convert
+ * ktime_compare - Compares two ktime_t variables for less, greater or equal
+ * @cmp1:	comparable1
+ * @cmp2:	comparable2
  *
- * Returns a ktime_t variable with the converted timeval value
+ * Return: ...
+ *   cmp1  < cmp2: return <0
+ *   cmp1 == cmp2: return 0
+ *   cmp1  > cmp2: return >0
  */
-static inline ktime_t timeval_to_ktime(const struct timeval tv)
+static inline int ktime_compare(const ktime_t cmp1, const ktime_t cmp2)
 {
-	return (ktime_t) { .tv = { .sec = (s32)tv.tv_sec,
-				   .nsec = (s32)tv.tv_usec * 1000 } };
+	if (cmp1.tv64 < cmp2.tv64)
+		return -1;
+	if (cmp1.tv64 > cmp2.tv64)
+		return 1;
+	return 0;
 }
 
 /**
- * ktime_to_timespec - convert a ktime_t variable to timespec format
- * @kt:		the ktime_t variable to convert
+ * ktime_after - Compare if a ktime_t value is bigger than another one.
+ * @cmp1:	comparable1
+ * @cmp2:	comparable2
  *
- * Returns the timespec representation of the ktime value
+ * Return: true if cmp1 happened after cmp2.
  */
-static inline struct timespec ktime_to_timespec(const ktime_t kt)
+static inline bool ktime_after(const ktime_t cmp1, const ktime_t cmp2)
 {
-	return (struct timespec) { .tv_sec = (time_t) kt.tv.sec,
-				   .tv_nsec = (long) kt.tv.nsec };
+	return ktime_compare(cmp1, cmp2) > 0;
 }
 
 /**
- * ktime_to_timeval - convert a ktime_t variable to timeval format
- * @kt:		the ktime_t variable to convert
+ * ktime_before - Compare if a ktime_t value is smaller than another one.
+ * @cmp1:	comparable1
+ * @cmp2:	comparable2
  *
- * Returns the timeval representation of the ktime value
+ * Return: true if cmp1 happened before cmp2.
  */
-static inline struct timeval ktime_to_timeval(const ktime_t kt)
+static inline bool ktime_before(const ktime_t cmp1, const ktime_t cmp2)
 {
-	return (struct timeval) {
-		.tv_sec = (time_t) kt.tv.sec,
-		.tv_usec = (suseconds_t) (kt.tv.nsec / NSEC_PER_USEC) };
+	return ktime_compare(cmp1, cmp2) < 0;
 }
 
-/**
- * ktime_to_ns - convert a ktime_t variable to scalar nanoseconds
- * @kt:		the ktime_t variable to convert
- *
- * Returns the scalar nanoseconds representation of @kt
- */
-static inline s64 ktime_to_ns(const ktime_t kt)
+#if BITS_PER_LONG < 64
+extern s64 __ktime_divns(const ktime_t kt, s64 div);
+static inline s64 ktime_divns(const ktime_t kt, s64 div)
 {
-	return (s64) kt.tv.sec * NSEC_PER_SEC + kt.tv.nsec;
-}
-
-#endif	/* !((BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)) */
+	/*
+	 * Negative divisors could cause an inf loop,
+	 * so bug out here.
+	 */
+	BUG_ON(div < 0);
+	if (__builtin_constant_p(div) && !(div >> 32)) {
+		s64 ns = kt.tv64;
+		u64 tmp = ns < 0 ? -ns : ns;
 
-/**
- * ktime_equal - Compares two ktime_t variables to see if they are equal
- * @cmp1:	comparable1
- * @cmp2:	comparable2
- *
- * Compare two ktime_t variables, returns 1 if equal
- */
-static inline int ktime_equal(const ktime_t cmp1, const ktime_t cmp2)
-{
-	return cmp1.tv64 == cmp2.tv64;
+		do_div(tmp, div);
+		return ns < 0 ? -tmp : tmp;
+	} else {
+		return __ktime_divns(kt, div);
+	}
 }
-
-/**
- * ktime_compare - Compares two ktime_t variables for less, greater or equal
- * @cmp1:	comparable1
- * @cmp2:	comparable2
- *
- * Returns ...
- *   cmp1  < cmp2: return <0
- *   cmp1 == cmp2: return 0
- *   cmp1  > cmp2: return >0
- */
-static inline int ktime_compare(const ktime_t cmp1, const ktime_t cmp2)
+#else /* BITS_PER_LONG < 64 */
+static inline s64 ktime_divns(const ktime_t kt, s64 div)
 {
-	if (cmp1.tv64 < cmp2.tv64)
-		return -1;
-	if (cmp1.tv64 > cmp2.tv64)
-		return 1;
-	return 0;
+	/*
+	 * 32-bit implementation cannot handle negative divisors,
+	 * so catch them on 64bit as well.
+	 */
+	WARN_ON(div < 0);
+	return kt.tv64 / div;
 }
+#endif
 
 static inline s64 ktime_to_us(const ktime_t kt)
 {
-	struct timeval tv = ktime_to_timeval(kt);
-	return (s64) tv.tv_sec * USEC_PER_SEC + tv.tv_usec;
+	return ktime_divns(kt, NSEC_PER_USEC);
 }
 
 static inline s64 ktime_to_ms(const ktime_t kt)
 {
-	struct timeval tv = ktime_to_timeval(kt);
-	return (s64) tv.tv_sec * MSEC_PER_SEC + tv.tv_usec / USEC_PER_MSEC;
+	return ktime_divns(kt, NSEC_PER_MSEC);
 }
 
 static inline s64 ktime_us_delta(const ktime_t later, const ktime_t earlier)
@@ -318,14 +211,24 @@
        return ktime_to_us(ktime_sub(later, earlier));
 }
 
+static inline s64 ktime_ms_delta(const ktime_t later, const ktime_t earlier)
+{
+	return ktime_to_ms(ktime_sub(later, earlier));
+}
+
 static inline ktime_t ktime_add_us(const ktime_t kt, const u64 usec)
 {
-	return ktime_add_ns(kt, usec * 1000);
+	return ktime_add_ns(kt, usec * NSEC_PER_USEC);
+}
+
+static inline ktime_t ktime_add_ms(const ktime_t kt, const u64 msec)
+{
+	return ktime_add_ns(kt, msec * NSEC_PER_MSEC);
 }
 
 static inline ktime_t ktime_sub_us(const ktime_t kt, const u64 usec)
 {
-	return ktime_sub_ns(kt, usec * 1000);
+	return ktime_sub_ns(kt, usec * NSEC_PER_USEC);
 }
 
 extern ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs);
@@ -336,9 +239,10 @@
  * @kt:		the ktime_t variable to convert
  * @ts:		the timespec variable to store the result in
  *
- * Returns true if there was a successful conversion, false if kt was 0.
+ * Return: %true if there was a successful conversion, %false if kt was 0.
  */
-static inline bool ktime_to_timespec_cond(const ktime_t kt, struct timespec *ts)
+static inline __must_check bool ktime_to_timespec_cond(const ktime_t kt,
+						       struct timespec *ts)
 {
 	if (kt.tv64) {
 		*ts = ktime_to_timespec(kt);
@@ -348,6 +252,25 @@
 	}
 }
 
+/**
+ * ktime_to_timespec64_cond - convert a ktime_t variable to timespec64
+ *			    format only if the variable contains data
+ * @kt:		the ktime_t variable to convert
+ * @ts:		the timespec variable to store the result in
+ *
+ * Return: %true if there was a successful conversion, %false if kt was 0.
+ */
+static inline __must_check bool ktime_to_timespec64_cond(const ktime_t kt,
+						       struct timespec64 *ts)
+{
+	if (kt.tv64) {
+		*ts = ktime_to_timespec64(kt);
+		return true;
+	} else {
+		return false;
+	}
+}
+
 /*
  * The resolution of the clocks. The resolution value is returned in
  * the clock_getres() system call to give application programmers an
@@ -357,16 +280,20 @@
 #define LOW_RES_NSEC		TICK_NSEC
 #define KTIME_LOW_RES		(ktime_t){ .tv64 = LOW_RES_NSEC }
 
-/* Get the monotonic time in timespec format: */
-extern void ktime_get_ts(struct timespec *ts);
-
-/* Get the real (wall-) time in timespec format: */
-#define ktime_get_real_ts(ts)	getnstimeofday(ts)
-
 static inline ktime_t ns_to_ktime(u64 ns)
 {
 	static const ktime_t ktime_zero = { .tv64 = 0 };
+
 	return ktime_add_ns(ktime_zero, ns);
 }
 
+static inline ktime_t ms_to_ktime(u64 ms)
+{
+	static const ktime_t ktime_zero = { .tv64 = 0 };
+
+	return ktime_add_ms(ktime_zero, ms);
+}
+
+# include <linux/timekeeping.h>
+
 #endif