--- zzzz-none-000/linux-3.10.107/include/linux/mfd/rtsx_pci.h 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/include/linux/mfd/rtsx_pci.h 2021-02-04 17:41:59.000000000 +0000 @@ -1,6 +1,6 @@ /* Driver for Realtek PCI-Express card reader * - * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -17,7 +17,6 @@ * * Author: * Wei WANG - * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China */ #ifndef __RTSX_PCI_H @@ -25,79 +24,76 @@ #include #include - -#include "rtsx_common.h" +#include #define MAX_RW_REG_CNT 1024 -/* PCI Operation Register Address */ #define RTSX_HCBAR 0x00 #define RTSX_HCBCTLR 0x04 +#define STOP_CMD (0x01 << 28) +#define READ_REG_CMD 0 +#define WRITE_REG_CMD 1 +#define CHECK_REG_CMD 2 + #define RTSX_HDBAR 0x08 +#define SG_INT 0x04 +#define SG_END 0x02 +#define SG_VALID 0x01 +#define SG_NO_OP 0x00 +#define SG_TRANS_DATA (0x02 << 4) +#define SG_LINK_DESC (0x03 << 4) #define RTSX_HDBCTLR 0x0C -#define RTSX_HAIMR 0x10 -#define RTSX_BIPR 0x14 -#define RTSX_BIER 0x18 +#define SDMA_MODE 0x00 +#define ADMA_MODE (0x02 << 26) +#define STOP_DMA (0x01 << 28) +#define TRIG_DMA (0x01 << 31) -/* Host command buffer control register */ -#define STOP_CMD (0x01 << 28) +#define RTSX_HAIMR 0x10 +#define HAIMR_TRANS_START (0x01 << 31) +#define HAIMR_READ 0x00 +#define HAIMR_WRITE (0x01 << 30) +#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ) +#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE) +#define HAIMR_TRANS_END (HAIMR_TRANS_START) -/* Host data buffer control register */ -#define SDMA_MODE 0x00 -#define ADMA_MODE (0x02 << 26) -#define STOP_DMA (0x01 << 28) -#define TRIG_DMA (0x01 << 31) - -/* Host access internal memory register */ -#define HAIMR_TRANS_START (0x01 << 31) -#define HAIMR_READ 0x00 -#define HAIMR_WRITE (0x01 << 30) -#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ) -#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE) -#define HAIMR_TRANS_END (HAIMR_TRANS_START) - -/* Bus interrupt pending register */ -#define CMD_DONE_INT (1 << 31) -#define DATA_DONE_INT (1 << 30) -#define TRANS_OK_INT (1 << 29) -#define TRANS_FAIL_INT (1 << 28) -#define XD_INT (1 << 27) -#define MS_INT (1 << 26) -#define SD_INT (1 << 25) -#define GPIO0_INT (1 << 24) -#define OC_INT (1 << 23) -#define SD_WRITE_PROTECT (1 << 19) -#define XD_EXIST (1 << 18) -#define MS_EXIST (1 << 17) -#define SD_EXIST (1 << 16) -#define DELINK_INT GPIO0_INT -#define MS_OC_INT (1 << 23) -#define SD_OC_INT (1 << 22) +#define RTSX_BIPR 0x14 +#define CMD_DONE_INT (1 << 31) +#define DATA_DONE_INT (1 << 30) +#define TRANS_OK_INT (1 << 29) +#define TRANS_FAIL_INT (1 << 28) +#define XD_INT (1 << 27) +#define MS_INT (1 << 26) +#define SD_INT (1 << 25) +#define GPIO0_INT (1 << 24) +#define OC_INT (1 << 23) +#define SD_WRITE_PROTECT (1 << 19) +#define XD_EXIST (1 << 18) +#define MS_EXIST (1 << 17) +#define SD_EXIST (1 << 16) +#define DELINK_INT GPIO0_INT +#define MS_OC_INT (1 << 23) +#define SD_OC_INT (1 << 22) #define CARD_INT (XD_INT | MS_INT | SD_INT) #define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT) #define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | \ CARD_INT | GPIO0_INT | OC_INT) - #define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST) -/* Bus interrupt enable register */ -#define CMD_DONE_INT_EN (1 << 31) -#define DATA_DONE_INT_EN (1 << 30) -#define TRANS_OK_INT_EN (1 << 29) -#define TRANS_FAIL_INT_EN (1 << 28) -#define XD_INT_EN (1 << 27) -#define MS_INT_EN (1 << 26) -#define SD_INT_EN (1 << 25) -#define GPIO0_INT_EN (1 << 24) -#define OC_INT_EN (1 << 23) -#define DELINK_INT_EN GPIO0_INT_EN -#define MS_OC_INT_EN (1 << 23) -#define SD_OC_INT_EN (1 << 22) - -#define READ_REG_CMD 0 -#define WRITE_REG_CMD 1 -#define CHECK_REG_CMD 2 +#define RTSX_BIER 0x18 +#define CMD_DONE_INT_EN (1 << 31) +#define DATA_DONE_INT_EN (1 << 30) +#define TRANS_OK_INT_EN (1 << 29) +#define TRANS_FAIL_INT_EN (1 << 28) +#define XD_INT_EN (1 << 27) +#define MS_INT_EN (1 << 26) +#define SD_INT_EN (1 << 25) +#define GPIO0_INT_EN (1 << 24) +#define OC_INT_EN (1 << 23) +#define DELINK_INT_EN GPIO0_INT_EN +#define MS_OC_INT_EN (1 << 23) +#define SD_OC_INT_EN (1 << 22) + /* * macros for easy use @@ -127,404 +123,68 @@ #define rtsx_pci_write_config_dword(pcr, where, val) \ pci_write_config_dword((pcr)->pci, where, val) -#define STATE_TRANS_NONE 0 -#define STATE_TRANS_CMD 1 -#define STATE_TRANS_BUF 2 -#define STATE_TRANS_SG 3 - -#define TRANS_NOT_READY 0 -#define TRANS_RESULT_OK 1 -#define TRANS_RESULT_FAIL 2 -#define TRANS_NO_DEVICE 3 - -#define RTSX_RESV_BUF_LEN 4096 -#define HOST_CMDS_BUF_LEN 1024 -#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN) -#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8) -#define MAX_SG_ITEM_LEN 0x80000 - -#define HOST_TO_DEVICE 0 -#define DEVICE_TO_HOST 1 - -#define MAX_PHASE 31 -#define RX_TUNING_CNT 3 - -/* SG descriptor */ -#define SG_INT 0x04 -#define SG_END 0x02 -#define SG_VALID 0x01 - -#define SG_NO_OP 0x00 -#define SG_TRANS_DATA (0x02 << 4) -#define SG_LINK_DESC (0x03 << 4) - -/* Output voltage */ -#define OUTPUT_3V3 0 -#define OUTPUT_1V8 1 - -/* Card Clock Enable Register */ -#define SD_CLK_EN 0x04 -#define MS_CLK_EN 0x08 - -/* Card Select Register */ -#define SD_MOD_SEL 2 -#define MS_MOD_SEL 3 - -/* Card Output Enable Register */ -#define SD_OUTPUT_EN 0x04 -#define MS_OUTPUT_EN 0x08 - -/* CARD_SHARE_MODE */ -#define CARD_SHARE_MASK 0x0F -#define CARD_SHARE_MULTI_LUN 0x00 -#define CARD_SHARE_NORMAL 0x00 -#define CARD_SHARE_48_SD 0x04 -#define CARD_SHARE_48_MS 0x08 -/* CARD_SHARE_MODE for barossa */ -#define CARD_SHARE_BAROSSA_SD 0x01 -#define CARD_SHARE_BAROSSA_MS 0x02 - -/* SD30_DRIVE_SEL */ -#define DRIVER_TYPE_A 0x05 -#define DRIVER_TYPE_B 0x03 -#define DRIVER_TYPE_C 0x02 -#define DRIVER_TYPE_D 0x01 - -/* FPDCTL */ -#define SSC_POWER_DOWN 0x01 -#define SD_OC_POWER_DOWN 0x02 -#define ALL_POWER_DOWN 0x07 -#define OC_POWER_DOWN 0x06 - -/* CLK_CTL */ -#define CHANGE_CLK 0x01 - -/* LDO_CTL */ -#define BPP_ASIC_1V7 0x00 -#define BPP_ASIC_1V8 0x01 -#define BPP_ASIC_1V9 0x02 -#define BPP_ASIC_2V0 0x03 -#define BPP_ASIC_2V7 0x04 -#define BPP_ASIC_2V8 0x05 -#define BPP_ASIC_3V2 0x06 -#define BPP_ASIC_3V3 0x07 -#define BPP_REG_TUNED18 0x07 -#define BPP_TUNED18_SHIFT_8402 5 -#define BPP_TUNED18_SHIFT_8411 4 -#define BPP_PAD_MASK 0x04 -#define BPP_PAD_3V3 0x04 -#define BPP_PAD_1V8 0x00 -#define BPP_LDO_POWB 0x03 -#define BPP_LDO_ON 0x00 -#define BPP_LDO_SUSPEND 0x02 -#define BPP_LDO_OFF 0x03 - -/* CD_PAD_CTL */ -#define CD_DISABLE_MASK 0x07 -#define MS_CD_DISABLE 0x04 -#define SD_CD_DISABLE 0x02 -#define XD_CD_DISABLE 0x01 -#define CD_DISABLE 0x07 -#define CD_ENABLE 0x00 -#define MS_CD_EN_ONLY 0x03 -#define SD_CD_EN_ONLY 0x05 -#define XD_CD_EN_ONLY 0x06 -#define FORCE_CD_LOW_MASK 0x38 -#define FORCE_CD_XD_LOW 0x08 -#define FORCE_CD_SD_LOW 0x10 -#define FORCE_CD_MS_LOW 0x20 -#define CD_AUTO_DISABLE 0x40 - -/* SD_STAT1 */ -#define SD_CRC7_ERR 0x80 -#define SD_CRC16_ERR 0x40 -#define SD_CRC_WRITE_ERR 0x20 -#define SD_CRC_WRITE_ERR_MASK 0x1C -#define GET_CRC_TIME_OUT 0x02 -#define SD_TUNING_COMPARE_ERR 0x01 - -/* SD_STAT2 */ -#define SD_RSP_80CLK_TIMEOUT 0x01 - -/* SD_BUS_STAT */ -#define SD_CLK_TOGGLE_EN 0x80 -#define SD_CLK_FORCE_STOP 0x40 -#define SD_DAT3_STATUS 0x10 -#define SD_DAT2_STATUS 0x08 -#define SD_DAT1_STATUS 0x04 -#define SD_DAT0_STATUS 0x02 -#define SD_CMD_STATUS 0x01 - -/* SD_PAD_CTL */ -#define SD_IO_USING_1V8 0x80 -#define SD_IO_USING_3V3 0x7F -#define TYPE_A_DRIVING 0x00 -#define TYPE_B_DRIVING 0x01 -#define TYPE_C_DRIVING 0x02 -#define TYPE_D_DRIVING 0x03 - -/* SD_SAMPLE_POINT_CTL */ -#define DDR_FIX_RX_DAT 0x00 -#define DDR_VAR_RX_DAT 0x80 -#define DDR_FIX_RX_DAT_EDGE 0x00 -#define DDR_FIX_RX_DAT_14_DELAY 0x40 -#define DDR_FIX_RX_CMD 0x00 -#define DDR_VAR_RX_CMD 0x20 -#define DDR_FIX_RX_CMD_POS_EDGE 0x00 -#define DDR_FIX_RX_CMD_14_DELAY 0x10 -#define SD20_RX_POS_EDGE 0x00 -#define SD20_RX_14_DELAY 0x08 -#define SD20_RX_SEL_MASK 0x08 +#define STATE_TRANS_NONE 0 +#define STATE_TRANS_CMD 1 +#define STATE_TRANS_BUF 2 +#define STATE_TRANS_SG 3 + +#define TRANS_NOT_READY 0 +#define TRANS_RESULT_OK 1 +#define TRANS_RESULT_FAIL 2 +#define TRANS_NO_DEVICE 3 + +#define RTSX_RESV_BUF_LEN 4096 +#define HOST_CMDS_BUF_LEN 1024 +#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN) +#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8) +#define MAX_SG_ITEM_LEN 0x80000 +#define HOST_TO_DEVICE 0 +#define DEVICE_TO_HOST 1 -/* SD_PUSH_POINT_CTL */ -#define DDR_FIX_TX_CMD_DAT 0x00 -#define DDR_VAR_TX_CMD_DAT 0x80 -#define DDR_FIX_TX_DAT_14_TSU 0x00 -#define DDR_FIX_TX_DAT_12_TSU 0x40 -#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 -#define DDR_FIX_TX_CMD_14_AHEAD 0x20 -#define SD20_TX_NEG_EDGE 0x00 -#define SD20_TX_14_AHEAD 0x10 -#define SD20_TX_SEL_MASK 0x10 -#define DDR_VAR_SDCLK_POL_SWAP 0x01 - -/* SD_TRANSFER */ -#define SD_TRANSFER_START 0x80 -#define SD_TRANSFER_END 0x40 -#define SD_STAT_IDLE 0x20 -#define SD_TRANSFER_ERR 0x10 -/* SD Transfer Mode definition */ -#define SD_TM_NORMAL_WRITE 0x00 -#define SD_TM_AUTO_WRITE_3 0x01 -#define SD_TM_AUTO_WRITE_4 0x02 -#define SD_TM_AUTO_READ_3 0x05 -#define SD_TM_AUTO_READ_4 0x06 -#define SD_TM_CMD_RSP 0x08 -#define SD_TM_AUTO_WRITE_1 0x09 -#define SD_TM_AUTO_WRITE_2 0x0A -#define SD_TM_NORMAL_READ 0x0C -#define SD_TM_AUTO_READ_1 0x0D -#define SD_TM_AUTO_READ_2 0x0E -#define SD_TM_AUTO_TUNING 0x0F - -/* SD_VPTX_CTL / SD_VPRX_CTL */ -#define PHASE_CHANGE 0x80 -#define PHASE_NOT_RESET 0x40 - -/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */ -#define DCMPS_CHANGE 0x80 -#define DCMPS_CHANGE_DONE 0x40 -#define DCMPS_ERROR 0x20 -#define DCMPS_CURRENT_PHASE 0x1F - -/* SD Configure 1 Register */ -#define SD_CLK_DIVIDE_0 0x00 -#define SD_CLK_DIVIDE_256 0xC0 -#define SD_CLK_DIVIDE_128 0x80 -#define SD_BUS_WIDTH_1BIT 0x00 -#define SD_BUS_WIDTH_4BIT 0x01 -#define SD_BUS_WIDTH_8BIT 0x02 -#define SD_ASYNC_FIFO_NOT_RST 0x10 -#define SD_20_MODE 0x00 -#define SD_DDR_MODE 0x04 -#define SD_30_MODE 0x08 - -#define SD_CLK_DIVIDE_MASK 0xC0 - -/* SD_CMD_STATE */ -#define SD_CMD_IDLE 0x80 - -/* SD_DATA_STATE */ -#define SD_DATA_IDLE 0x80 - -/* DCM_DRP_CTL */ -#define DCM_RESET 0x08 -#define DCM_LOCKED 0x04 -#define DCM_208M 0x00 -#define DCM_TX 0x01 -#define DCM_RX 0x02 - -/* DCM_DRP_TRIG */ -#define DRP_START 0x80 -#define DRP_DONE 0x40 - -/* DCM_DRP_CFG */ -#define DRP_WRITE 0x80 -#define DRP_READ 0x00 -#define DCM_WRITE_ADDRESS_50 0x50 -#define DCM_WRITE_ADDRESS_51 0x51 -#define DCM_READ_ADDRESS_00 0x00 -#define DCM_READ_ADDRESS_51 0x51 - -/* IRQSTAT0 */ -#define DMA_DONE_INT 0x80 -#define SUSPEND_INT 0x40 -#define LINK_RDY_INT 0x20 -#define LINK_DOWN_INT 0x10 - -/* DMACTL */ -#define DMA_RST 0x80 -#define DMA_BUSY 0x04 -#define DMA_DIR_TO_CARD 0x00 -#define DMA_DIR_FROM_CARD 0x02 -#define DMA_EN 0x01 -#define DMA_128 (0 << 4) -#define DMA_256 (1 << 4) -#define DMA_512 (2 << 4) -#define DMA_1024 (3 << 4) -#define DMA_PACK_SIZE_MASK 0x30 - -/* SSC_CTL1 */ -#define SSC_RSTB 0x80 -#define SSC_8X_EN 0x40 -#define SSC_FIX_FRAC 0x20 -#define SSC_SEL_1M 0x00 -#define SSC_SEL_2M 0x08 -#define SSC_SEL_4M 0x10 -#define SSC_SEL_8M 0x18 - -/* SSC_CTL2 */ -#define SSC_DEPTH_MASK 0x07 -#define SSC_DEPTH_DISALBE 0x00 -#define SSC_DEPTH_4M 0x01 -#define SSC_DEPTH_2M 0x02 -#define SSC_DEPTH_1M 0x03 -#define SSC_DEPTH_500K 0x04 -#define SSC_DEPTH_250K 0x05 - -/* System Clock Control Register */ -#define CLK_LOW_FREQ 0x01 - -/* System Clock Divider Register */ -#define CLK_DIV_1 0x01 -#define CLK_DIV_2 0x02 -#define CLK_DIV_4 0x03 -#define CLK_DIV_8 0x04 - -/* MS_CFG */ -#define SAMPLE_TIME_RISING 0x00 -#define SAMPLE_TIME_FALLING 0x80 -#define PUSH_TIME_DEFAULT 0x00 -#define PUSH_TIME_ODD 0x40 -#define NO_EXTEND_TOGGLE 0x00 -#define EXTEND_TOGGLE_CHK 0x20 -#define MS_BUS_WIDTH_1 0x00 -#define MS_BUS_WIDTH_4 0x10 -#define MS_BUS_WIDTH_8 0x18 -#define MS_2K_SECTOR_MODE 0x04 -#define MS_512_SECTOR_MODE 0x00 -#define MS_TOGGLE_TIMEOUT_EN 0x00 -#define MS_TOGGLE_TIMEOUT_DISEN 0x01 -#define MS_NO_CHECK_INT 0x02 +#define OUTPUT_3V3 0 +#define OUTPUT_1V8 1 -/* MS_TRANS_CFG */ -#define WAIT_INT 0x80 -#define NO_WAIT_INT 0x00 -#define NO_AUTO_READ_INT_REG 0x00 -#define AUTO_READ_INT_REG 0x40 -#define MS_CRC16_ERR 0x20 -#define MS_RDY_TIMEOUT 0x10 -#define MS_INT_CMDNK 0x08 -#define MS_INT_BREQ 0x04 -#define MS_INT_ERR 0x02 -#define MS_INT_CED 0x01 - -/* MS_TRANSFER */ -#define MS_TRANSFER_START 0x80 -#define MS_TRANSFER_END 0x40 -#define MS_TRANSFER_ERR 0x20 -#define MS_BS_STATE 0x10 -#define MS_TM_READ_BYTES 0x00 -#define MS_TM_NORMAL_READ 0x01 -#define MS_TM_WRITE_BYTES 0x04 -#define MS_TM_NORMAL_WRITE 0x05 -#define MS_TM_AUTO_READ 0x08 -#define MS_TM_AUTO_WRITE 0x0C - -/* SD Configure 2 Register */ -#define SD_CALCULATE_CRC7 0x00 -#define SD_NO_CALCULATE_CRC7 0x80 -#define SD_CHECK_CRC16 0x00 -#define SD_NO_CHECK_CRC16 0x40 -#define SD_NO_CHECK_WAIT_CRC_TO 0x20 -#define SD_WAIT_BUSY_END 0x08 -#define SD_NO_WAIT_BUSY_END 0x00 -#define SD_CHECK_CRC7 0x00 -#define SD_NO_CHECK_CRC7 0x04 -#define SD_RSP_LEN_0 0x00 -#define SD_RSP_LEN_6 0x01 -#define SD_RSP_LEN_17 0x02 -/* SD/MMC Response Type Definition */ -#define SD_RSP_TYPE_R0 0x04 -#define SD_RSP_TYPE_R1 0x01 -#define SD_RSP_TYPE_R1b 0x09 -#define SD_RSP_TYPE_R2 0x02 -#define SD_RSP_TYPE_R3 0x05 -#define SD_RSP_TYPE_R4 0x05 -#define SD_RSP_TYPE_R5 0x01 -#define SD_RSP_TYPE_R6 0x01 -#define SD_RSP_TYPE_R7 0x01 - -/* SD_CONFIGURE3 */ -#define SD_RSP_80CLK_TIMEOUT_EN 0x01 - -/* Card Transfer Reset Register */ -#define SPI_STOP 0x01 -#define XD_STOP 0x02 -#define SD_STOP 0x04 -#define MS_STOP 0x08 -#define SPI_CLR_ERR 0x10 -#define XD_CLR_ERR 0x20 -#define SD_CLR_ERR 0x40 -#define MS_CLR_ERR 0x80 - -/* Card Data Source Register */ -#define PINGPONG_BUFFER 0x01 -#define RING_BUFFER 0x00 - -/* Card Power Control Register */ -#define PMOS_STRG_MASK 0x10 -#define PMOS_STRG_800mA 0x10 -#define PMOS_STRG_400mA 0x00 -#define SD_POWER_OFF 0x03 -#define SD_PARTIAL_POWER_ON 0x01 -#define SD_POWER_ON 0x00 -#define SD_POWER_MASK 0x03 -#define MS_POWER_OFF 0x0C -#define MS_PARTIAL_POWER_ON 0x04 -#define MS_POWER_ON 0x00 -#define MS_POWER_MASK 0x0C -#define BPP_POWER_OFF 0x0F -#define BPP_POWER_5_PERCENT_ON 0x0E -#define BPP_POWER_10_PERCENT_ON 0x0C -#define BPP_POWER_15_PERCENT_ON 0x08 -#define BPP_POWER_ON 0x00 -#define BPP_POWER_MASK 0x0F -#define SD_VCC_PARTIAL_POWER_ON 0x02 -#define SD_VCC_POWER_ON 0x00 - -/* PWR_GATE_CTRL */ -#define PWR_GATE_EN 0x01 -#define LDO3318_PWR_MASK 0x06 -#define LDO_ON 0x00 -#define LDO_SUSPEND 0x04 -#define LDO_OFF 0x06 - -/* CARD_CLK_SOURCE */ -#define CRC_FIX_CLK (0x00 << 0) -#define CRC_VAR_CLK0 (0x01 << 0) -#define CRC_VAR_CLK1 (0x02 << 0) -#define SD30_FIX_CLK (0x00 << 2) -#define SD30_VAR_CLK0 (0x01 << 2) -#define SD30_VAR_CLK1 (0x02 << 2) -#define SAMPLE_FIX_CLK (0x00 << 4) -#define SAMPLE_VAR_CLK0 (0x01 << 4) -#define SAMPLE_VAR_CLK1 (0x02 << 4) +#define RTSX_PHASE_MAX 32 +#define RX_TUNING_CNT 3 #define MS_CFG 0xFD40 +#define SAMPLE_TIME_RISING 0x00 +#define SAMPLE_TIME_FALLING 0x80 +#define PUSH_TIME_DEFAULT 0x00 +#define PUSH_TIME_ODD 0x40 +#define NO_EXTEND_TOGGLE 0x00 +#define EXTEND_TOGGLE_CHK 0x20 +#define MS_BUS_WIDTH_1 0x00 +#define MS_BUS_WIDTH_4 0x10 +#define MS_BUS_WIDTH_8 0x18 +#define MS_2K_SECTOR_MODE 0x04 +#define MS_512_SECTOR_MODE 0x00 +#define MS_TOGGLE_TIMEOUT_EN 0x00 +#define MS_TOGGLE_TIMEOUT_DISEN 0x01 +#define MS_NO_CHECK_INT 0x02 #define MS_TPC 0xFD41 #define MS_TRANS_CFG 0xFD42 +#define WAIT_INT 0x80 +#define NO_WAIT_INT 0x00 +#define NO_AUTO_READ_INT_REG 0x00 +#define AUTO_READ_INT_REG 0x40 +#define MS_CRC16_ERR 0x20 +#define MS_RDY_TIMEOUT 0x10 +#define MS_INT_CMDNK 0x08 +#define MS_INT_BREQ 0x04 +#define MS_INT_ERR 0x02 +#define MS_INT_CED 0x01 #define MS_TRANSFER 0xFD43 +#define MS_TRANSFER_START 0x80 +#define MS_TRANSFER_END 0x40 +#define MS_TRANSFER_ERR 0x20 +#define MS_BS_STATE 0x10 +#define MS_TM_READ_BYTES 0x00 +#define MS_TM_NORMAL_READ 0x01 +#define MS_TM_WRITE_BYTES 0x04 +#define MS_TM_NORMAL_WRITE 0x05 +#define MS_TM_AUTO_READ 0x08 +#define MS_TM_AUTO_WRITE 0x0C #define MS_INT_REG 0xFD44 #define MS_BYTE_CNT 0xFD45 #define MS_SECTOR_CNT_L 0xFD46 @@ -532,15 +192,92 @@ #define MS_DBUS_H 0xFD48 #define SD_CFG1 0xFDA0 +#define SD_CLK_DIVIDE_0 0x00 +#define SD_CLK_DIVIDE_256 0xC0 +#define SD_CLK_DIVIDE_128 0x80 +#define SD_BUS_WIDTH_1BIT 0x00 +#define SD_BUS_WIDTH_4BIT 0x01 +#define SD_BUS_WIDTH_8BIT 0x02 +#define SD_ASYNC_FIFO_NOT_RST 0x10 +#define SD_20_MODE 0x00 +#define SD_DDR_MODE 0x04 +#define SD_30_MODE 0x08 +#define SD_CLK_DIVIDE_MASK 0xC0 #define SD_CFG2 0xFDA1 +#define SD_CALCULATE_CRC7 0x00 +#define SD_NO_CALCULATE_CRC7 0x80 +#define SD_CHECK_CRC16 0x00 +#define SD_NO_CHECK_CRC16 0x40 +#define SD_NO_CHECK_WAIT_CRC_TO 0x20 +#define SD_WAIT_BUSY_END 0x08 +#define SD_NO_WAIT_BUSY_END 0x00 +#define SD_CHECK_CRC7 0x00 +#define SD_NO_CHECK_CRC7 0x04 +#define SD_RSP_LEN_0 0x00 +#define SD_RSP_LEN_6 0x01 +#define SD_RSP_LEN_17 0x02 +#define SD_RSP_TYPE_R0 0x04 +#define SD_RSP_TYPE_R1 0x01 +#define SD_RSP_TYPE_R1b 0x09 +#define SD_RSP_TYPE_R2 0x02 +#define SD_RSP_TYPE_R3 0x05 +#define SD_RSP_TYPE_R4 0x05 +#define SD_RSP_TYPE_R5 0x01 +#define SD_RSP_TYPE_R6 0x01 +#define SD_RSP_TYPE_R7 0x01 #define SD_CFG3 0xFDA2 +#define SD_RSP_80CLK_TIMEOUT_EN 0x01 + #define SD_STAT1 0xFDA3 +#define SD_CRC7_ERR 0x80 +#define SD_CRC16_ERR 0x40 +#define SD_CRC_WRITE_ERR 0x20 +#define SD_CRC_WRITE_ERR_MASK 0x1C +#define GET_CRC_TIME_OUT 0x02 +#define SD_TUNING_COMPARE_ERR 0x01 #define SD_STAT2 0xFDA4 +#define SD_RSP_80CLK_TIMEOUT 0x01 + #define SD_BUS_STAT 0xFDA5 +#define SD_CLK_TOGGLE_EN 0x80 +#define SD_CLK_FORCE_STOP 0x40 +#define SD_DAT3_STATUS 0x10 +#define SD_DAT2_STATUS 0x08 +#define SD_DAT1_STATUS 0x04 +#define SD_DAT0_STATUS 0x02 +#define SD_CMD_STATUS 0x01 #define SD_PAD_CTL 0xFDA6 +#define SD_IO_USING_1V8 0x80 +#define SD_IO_USING_3V3 0x7F +#define TYPE_A_DRIVING 0x00 +#define TYPE_B_DRIVING 0x01 +#define TYPE_C_DRIVING 0x02 +#define TYPE_D_DRIVING 0x03 #define SD_SAMPLE_POINT_CTL 0xFDA7 +#define DDR_FIX_RX_DAT 0x00 +#define DDR_VAR_RX_DAT 0x80 +#define DDR_FIX_RX_DAT_EDGE 0x00 +#define DDR_FIX_RX_DAT_14_DELAY 0x40 +#define DDR_FIX_RX_CMD 0x00 +#define DDR_VAR_RX_CMD 0x20 +#define DDR_FIX_RX_CMD_POS_EDGE 0x00 +#define DDR_FIX_RX_CMD_14_DELAY 0x10 +#define SD20_RX_POS_EDGE 0x00 +#define SD20_RX_14_DELAY 0x08 +#define SD20_RX_SEL_MASK 0x08 #define SD_PUSH_POINT_CTL 0xFDA8 +#define DDR_FIX_TX_CMD_DAT 0x00 +#define DDR_VAR_TX_CMD_DAT 0x80 +#define DDR_FIX_TX_DAT_14_TSU 0x00 +#define DDR_FIX_TX_DAT_12_TSU 0x40 +#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 +#define DDR_FIX_TX_CMD_14_AHEAD 0x20 +#define SD20_TX_NEG_EDGE 0x00 +#define SD20_TX_14_AHEAD 0x10 +#define SD20_TX_SEL_MASK 0x10 +#define DDR_VAR_SDCLK_POL_SWAP 0x01 #define SD_CMD0 0xFDA9 +#define SD_CMD_START 0x40 #define SD_CMD1 0xFDAA #define SD_CMD2 0xFDAB #define SD_CMD3 0xFDAC @@ -551,59 +288,203 @@ #define SD_BLOCK_CNT_L 0xFDB1 #define SD_BLOCK_CNT_H 0xFDB2 #define SD_TRANSFER 0xFDB3 +#define SD_TRANSFER_START 0x80 +#define SD_TRANSFER_END 0x40 +#define SD_STAT_IDLE 0x20 +#define SD_TRANSFER_ERR 0x10 +#define SD_TM_NORMAL_WRITE 0x00 +#define SD_TM_AUTO_WRITE_3 0x01 +#define SD_TM_AUTO_WRITE_4 0x02 +#define SD_TM_AUTO_READ_3 0x05 +#define SD_TM_AUTO_READ_4 0x06 +#define SD_TM_CMD_RSP 0x08 +#define SD_TM_AUTO_WRITE_1 0x09 +#define SD_TM_AUTO_WRITE_2 0x0A +#define SD_TM_NORMAL_READ 0x0C +#define SD_TM_AUTO_READ_1 0x0D +#define SD_TM_AUTO_READ_2 0x0E +#define SD_TM_AUTO_TUNING 0x0F #define SD_CMD_STATE 0xFDB5 +#define SD_CMD_IDLE 0x80 + #define SD_DATA_STATE 0xFDB6 +#define SD_DATA_IDLE 0x80 #define SRCTL 0xFC13 -#define DCM_DRP_CTL 0xFC23 -#define DCM_DRP_TRIG 0xFC24 -#define DCM_DRP_CFG 0xFC25 -#define DCM_DRP_WR_DATA_L 0xFC26 -#define DCM_DRP_WR_DATA_H 0xFC27 -#define DCM_DRP_RD_DATA_L 0xFC28 -#define DCM_DRP_RD_DATA_H 0xFC29 +#define DCM_DRP_CTL 0xFC23 +#define DCM_RESET 0x08 +#define DCM_LOCKED 0x04 +#define DCM_208M 0x00 +#define DCM_TX 0x01 +#define DCM_RX 0x02 +#define DCM_DRP_TRIG 0xFC24 +#define DRP_START 0x80 +#define DRP_DONE 0x40 +#define DCM_DRP_CFG 0xFC25 +#define DRP_WRITE 0x80 +#define DRP_READ 0x00 +#define DCM_WRITE_ADDRESS_50 0x50 +#define DCM_WRITE_ADDRESS_51 0x51 +#define DCM_READ_ADDRESS_00 0x00 +#define DCM_READ_ADDRESS_51 0x51 +#define DCM_DRP_WR_DATA_L 0xFC26 +#define DCM_DRP_WR_DATA_H 0xFC27 +#define DCM_DRP_RD_DATA_L 0xFC28 +#define DCM_DRP_RD_DATA_H 0xFC29 #define SD_VPCLK0_CTL 0xFC2A #define SD_VPCLK1_CTL 0xFC2B #define SD_DCMPS0_CTL 0xFC2C #define SD_DCMPS1_CTL 0xFC2D #define SD_VPTX_CTL SD_VPCLK0_CTL #define SD_VPRX_CTL SD_VPCLK1_CTL +#define PHASE_CHANGE 0x80 +#define PHASE_NOT_RESET 0x40 #define SD_DCMPS_TX_CTL SD_DCMPS0_CTL #define SD_DCMPS_RX_CTL SD_DCMPS1_CTL +#define DCMPS_CHANGE 0x80 +#define DCMPS_CHANGE_DONE 0x40 +#define DCMPS_ERROR 0x20 +#define DCMPS_CURRENT_PHASE 0x1F #define CARD_CLK_SOURCE 0xFC2E - +#define CRC_FIX_CLK (0x00 << 0) +#define CRC_VAR_CLK0 (0x01 << 0) +#define CRC_VAR_CLK1 (0x02 << 0) +#define SD30_FIX_CLK (0x00 << 2) +#define SD30_VAR_CLK0 (0x01 << 2) +#define SD30_VAR_CLK1 (0x02 << 2) +#define SAMPLE_FIX_CLK (0x00 << 4) +#define SAMPLE_VAR_CLK0 (0x01 << 4) +#define SAMPLE_VAR_CLK1 (0x02 << 4) #define CARD_PWR_CTL 0xFD50 +#define PMOS_STRG_MASK 0x10 +#define PMOS_STRG_800mA 0x10 +#define PMOS_STRG_400mA 0x00 +#define SD_POWER_OFF 0x03 +#define SD_PARTIAL_POWER_ON 0x01 +#define SD_POWER_ON 0x00 +#define SD_POWER_MASK 0x03 +#define MS_POWER_OFF 0x0C +#define MS_PARTIAL_POWER_ON 0x04 +#define MS_POWER_ON 0x00 +#define MS_POWER_MASK 0x0C +#define BPP_POWER_OFF 0x0F +#define BPP_POWER_5_PERCENT_ON 0x0E +#define BPP_POWER_10_PERCENT_ON 0x0C +#define BPP_POWER_15_PERCENT_ON 0x08 +#define BPP_POWER_ON 0x00 +#define BPP_POWER_MASK 0x0F +#define SD_VCC_PARTIAL_POWER_ON 0x02 +#define SD_VCC_POWER_ON 0x00 #define CARD_CLK_SWITCH 0xFD51 +#define RTL8411B_PACKAGE_MODE 0xFD51 #define CARD_SHARE_MODE 0xFD52 +#define CARD_SHARE_MASK 0x0F +#define CARD_SHARE_MULTI_LUN 0x00 +#define CARD_SHARE_NORMAL 0x00 +#define CARD_SHARE_48_SD 0x04 +#define CARD_SHARE_48_MS 0x08 +#define CARD_SHARE_BAROSSA_SD 0x01 +#define CARD_SHARE_BAROSSA_MS 0x02 #define CARD_DRIVE_SEL 0xFD53 +#define MS_DRIVE_8mA (0x01 << 6) +#define MMC_DRIVE_8mA (0x01 << 4) +#define XD_DRIVE_8mA (0x01 << 2) +#define GPIO_DRIVE_8mA 0x01 +#define RTS5209_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | MMC_DRIVE_8mA |\ + XD_DRIVE_8mA | GPIO_DRIVE_8mA) +#define RTL8411_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | MMC_DRIVE_8mA |\ + XD_DRIVE_8mA) +#define RTSX_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | GPIO_DRIVE_8mA) + #define CARD_STOP 0xFD54 +#define SPI_STOP 0x01 +#define XD_STOP 0x02 +#define SD_STOP 0x04 +#define MS_STOP 0x08 +#define SPI_CLR_ERR 0x10 +#define XD_CLR_ERR 0x20 +#define SD_CLR_ERR 0x40 +#define MS_CLR_ERR 0x80 #define CARD_OE 0xFD55 +#define SD_OUTPUT_EN 0x04 +#define MS_OUTPUT_EN 0x08 #define CARD_AUTO_BLINK 0xFD56 #define CARD_GPIO_DIR 0xFD57 #define CARD_GPIO 0xFD58 #define CARD_DATA_SOURCE 0xFD5B +#define PINGPONG_BUFFER 0x01 +#define RING_BUFFER 0x00 #define SD30_CLK_DRIVE_SEL 0xFD5A +#define DRIVER_TYPE_A 0x05 +#define DRIVER_TYPE_B 0x03 +#define DRIVER_TYPE_C 0x02 +#define DRIVER_TYPE_D 0x01 #define CARD_SELECT 0xFD5C +#define SD_MOD_SEL 2 +#define MS_MOD_SEL 3 #define SD30_DRIVE_SEL 0xFD5E +#define CFG_DRIVER_TYPE_A 0x02 +#define CFG_DRIVER_TYPE_B 0x03 +#define CFG_DRIVER_TYPE_C 0x01 +#define CFG_DRIVER_TYPE_D 0x00 #define SD30_CMD_DRIVE_SEL 0xFD5E #define SD30_DAT_DRIVE_SEL 0xFD5F #define CARD_CLK_EN 0xFD69 +#define SD_CLK_EN 0x04 +#define MS_CLK_EN 0x08 #define SDIO_CTRL 0xFD6B #define CD_PAD_CTL 0xFD73 - +#define CD_DISABLE_MASK 0x07 +#define MS_CD_DISABLE 0x04 +#define SD_CD_DISABLE 0x02 +#define XD_CD_DISABLE 0x01 +#define CD_DISABLE 0x07 +#define CD_ENABLE 0x00 +#define MS_CD_EN_ONLY 0x03 +#define SD_CD_EN_ONLY 0x05 +#define XD_CD_EN_ONLY 0x06 +#define FORCE_CD_LOW_MASK 0x38 +#define FORCE_CD_XD_LOW 0x08 +#define FORCE_CD_SD_LOW 0x10 +#define FORCE_CD_MS_LOW 0x20 +#define CD_AUTO_DISABLE 0x40 #define FPDCTL 0xFC00 +#define SSC_POWER_DOWN 0x01 +#define SD_OC_POWER_DOWN 0x02 +#define ALL_POWER_DOWN 0x07 +#define OC_POWER_DOWN 0x06 #define PDINFO 0xFC01 #define CLK_CTL 0xFC02 +#define CHANGE_CLK 0x01 +#define CLK_LOW_FREQ 0x01 + #define CLK_DIV 0xFC03 +#define CLK_DIV_1 0x01 +#define CLK_DIV_2 0x02 +#define CLK_DIV_4 0x03 +#define CLK_DIV_8 0x04 #define CLK_SEL 0xFC04 #define SSC_DIV_N_0 0xFC0F #define SSC_DIV_N_1 0xFC10 #define SSC_CTL1 0xFC11 +#define SSC_RSTB 0x80 +#define SSC_8X_EN 0x40 +#define SSC_FIX_FRAC 0x20 +#define SSC_SEL_1M 0x00 +#define SSC_SEL_2M 0x08 +#define SSC_SEL_4M 0x10 +#define SSC_SEL_8M 0x18 #define SSC_CTL2 0xFC12 - +#define SSC_DEPTH_MASK 0x07 +#define SSC_DEPTH_DISALBE 0x00 +#define SSC_DEPTH_4M 0x01 +#define SSC_DEPTH_2M 0x02 +#define SSC_DEPTH_1M 0x03 +#define SSC_DEPTH_500K 0x04 +#define SSC_DEPTH_250K 0x05 #define RCCTL 0xFC14 #define FPGA_PULL_CTL 0xFC1D @@ -611,6 +492,24 @@ #define GPIO_CTL 0xFC1F #define LDO_CTL 0xFC1E +#define BPP_ASIC_1V7 0x00 +#define BPP_ASIC_1V8 0x01 +#define BPP_ASIC_1V9 0x02 +#define BPP_ASIC_2V0 0x03 +#define BPP_ASIC_2V7 0x04 +#define BPP_ASIC_2V8 0x05 +#define BPP_ASIC_3V2 0x06 +#define BPP_ASIC_3V3 0x07 +#define BPP_REG_TUNED18 0x07 +#define BPP_TUNED18_SHIFT_8402 5 +#define BPP_TUNED18_SHIFT_8411 4 +#define BPP_PAD_MASK 0x04 +#define BPP_PAD_3V3 0x04 +#define BPP_PAD_1V8 0x00 +#define BPP_LDO_POWB 0x03 +#define BPP_LDO_ON 0x00 +#define BPP_LDO_SUSPEND 0x02 +#define BPP_LDO_OFF 0x03 #define SYS_VER 0xFC32 #define CARD_PULL_CTL1 0xFD60 @@ -623,6 +522,10 @@ /* PCI Express Related Registers */ #define IRQEN0 0xFE20 #define IRQSTAT0 0xFE21 +#define DMA_DONE_INT 0x80 +#define SUSPEND_INT 0x40 +#define LINK_RDY_INT 0x20 +#define LINK_DOWN_INT 0x10 #define IRQEN1 0xFE22 #define IRQSTAT1 0xFE23 #define TLPRIEN 0xFE24 @@ -634,6 +537,16 @@ #define DMATC2 0xFE2A #define DMATC3 0xFE2B #define DMACTL 0xFE2C +#define DMA_RST 0x80 +#define DMA_BUSY 0x04 +#define DMA_DIR_TO_CARD 0x00 +#define DMA_DIR_FROM_CARD 0x02 +#define DMA_EN 0x01 +#define DMA_128 (0 << 4) +#define DMA_256 (1 << 4) +#define DMA_512 (2 << 4) +#define DMA_1024 (3 << 4) +#define DMA_PACK_SIZE_MASK 0x30 #define BCTL 0xFE2D #define RBBC0 0xFE2E #define RBBC1 0xFE2F @@ -659,30 +572,71 @@ #define MSGTXDATA2 0xFE46 #define MSGTXDATA3 0xFE47 #define MSGTXCTL 0xFE48 -#define PETXCFG 0xFE49 #define LTR_CTL 0xFE4A #define OBFF_CFG 0xFE4C #define CDRESUMECTL 0xFE52 #define WAKE_SEL_CTL 0xFE54 +#define PCLK_CTL 0xFE55 +#define PCLK_MODE_SEL 0x20 #define PME_FORCE_CTL 0xFE56 + #define ASPM_FORCE_CTL 0xFE57 +#define FORCE_ASPM_CTL0 0x10 +#define FORCE_ASPM_VAL_MASK 0x03 +#define FORCE_ASPM_L1_EN 0x02 +#define FORCE_ASPM_L0_EN 0x01 +#define FORCE_ASPM_NO_ASPM 0x00 #define PM_CLK_FORCE_CTL 0xFE58 +#define FUNC_FORCE_CTL 0xFE59 +#define FUNC_FORCE_UPME_XMT_DBG 0x02 #define PERST_GLITCH_WIDTH 0xFE5C #define CHANGE_LINK_STATE 0xFE5B #define RESET_LOAD_REG 0xFE5E #define EFUSE_CONTENT 0xFE5F #define HOST_SLEEP_STATE 0xFE60 -#define SDIO_CFG 0xFE70 +#define HOST_ENTER_S1 1 +#define HOST_ENTER_S3 2 +#define SDIO_CFG 0xFE70 +#define PM_EVENT_DEBUG 0xFE71 +#define PME_DEBUG_0 0x08 #define NFTS_TX_CTRL 0xFE72 #define PWR_GATE_CTRL 0xFE75 +#define PWR_GATE_EN 0x01 +#define LDO3318_PWR_MASK 0x06 +#define LDO_ON 0x00 +#define LDO_SUSPEND 0x04 +#define LDO_OFF 0x06 #define PWD_SUSPEND_EN 0xFE76 #define LDO_PWR_SEL 0xFE78 +#define L1SUB_CONFIG1 0xFE8D +#define L1SUB_CONFIG2 0xFE8E +#define L1SUB_AUTO_CFG 0x02 +#define L1SUB_CONFIG3 0xFE8F + #define DUMMY_REG_RESET_0 0xFE90 +#define AUTOLOAD_CFG_BASE 0xFF00 +#define PETXCFG 0xFF03 + +#define PM_CTRL1 0xFF44 +#define CD_RESUME_EN_MASK 0xF0 + +#define PM_CTRL2 0xFF45 +#define PM_CTRL3 0xFF46 +#define SDIO_SEND_PME_EN 0x80 +#define FORCE_RC_MODE_ON 0x40 +#define FORCE_RX50_LINK_ON 0x20 +#define D3_DELINK_MODE_EN 0x10 +#define USE_PESRTB_CTL_DELINK 0x08 +#define DELAY_PIN_WAKE 0x04 +#define RESET_PIN_WAKE 0x02 +#define PM_WAKE_EN 0x01 +#define PM_CTRL4 0xFF47 + /* Memory mapping */ #define SRAM_BASE 0xE600 #define RBUF_BASE 0xF400 @@ -691,18 +645,127 @@ #define IMAGE_FLAG_ADDR0 0xCE80 #define IMAGE_FLAG_ADDR1 0xCE81 +#define RREF_CFG 0xFF6C +#define RREF_VBGSEL_MASK 0x38 +#define RREF_VBGSEL_1V25 0x28 + +#define OOBS_CONFIG 0xFF6E +#define OOBS_AUTOK_DIS 0x80 +#define OOBS_VAL_MASK 0x1F + +#define LDO_DV18_CFG 0xFF70 +#define LDO_DV18_SR_MASK 0xC0 +#define LDO_DV18_SR_DF 0x40 + +#define LDO_CONFIG2 0xFF71 +#define LDO_D3318_MASK 0x07 +#define LDO_D3318_33V 0x07 +#define LDO_D3318_18V 0x02 + +#define LDO_VCC_CFG0 0xFF72 +#define LDO_VCC_LMTVTH_MASK 0x30 +#define LDO_VCC_LMTVTH_2A 0x10 + +#define LDO_VCC_CFG1 0xFF73 +#define LDO_VCC_REF_TUNE_MASK 0x30 +#define LDO_VCC_REF_1V2 0x20 +#define LDO_VCC_TUNE_MASK 0x07 +#define LDO_VCC_1V8 0x04 +#define LDO_VCC_3V3 0x07 +#define LDO_VCC_LMT_EN 0x08 + +#define LDO_VIO_CFG 0xFF75 +#define LDO_VIO_SR_MASK 0xC0 +#define LDO_VIO_SR_DF 0x40 +#define LDO_VIO_REF_TUNE_MASK 0x30 +#define LDO_VIO_REF_1V2 0x20 +#define LDO_VIO_TUNE_MASK 0x07 +#define LDO_VIO_1V7 0x03 +#define LDO_VIO_1V8 0x04 +#define LDO_VIO_3V3 0x07 + +#define LDO_DV12S_CFG 0xFF76 +#define LDO_REF12_TUNE_MASK 0x18 +#define LDO_REF12_TUNE_DF 0x10 +#define LDO_D12_TUNE_MASK 0x07 +#define LDO_D12_TUNE_DF 0x04 + +#define LDO_AV12S_CFG 0xFF77 +#define LDO_AV12S_TUNE_MASK 0x07 +#define LDO_AV12S_TUNE_DF 0x04 + +#define SD40_LDO_CTL1 0xFE7D +#define SD40_VIO_TUNE_MASK 0x70 +#define SD40_VIO_TUNE_1V7 0x30 +#define SD_VIO_LDO_1V8 0x40 +#define SD_VIO_LDO_3V3 0x70 + /* Phy register */ #define PHY_PCR 0x00 +#define PHY_PCR_FORCE_CODE 0xB000 +#define PHY_PCR_OOBS_CALI_50 0x0800 +#define PHY_PCR_OOBS_VCM_08 0x0200 +#define PHY_PCR_OOBS_SEN_90 0x0040 +#define PHY_PCR_RSSI_EN 0x0002 +#define PHY_PCR_RX10K 0x0001 + #define PHY_RCR0 0x01 #define PHY_RCR1 0x02 +#define PHY_RCR1_ADP_TIME_4 0x0400 +#define PHY_RCR1_VCO_COARSE 0x001F +#define PHY_RCR1_INIT_27S 0x0A1F +#define PHY_SSCCR2 0x02 +#define PHY_SSCCR2_PLL_NCODE 0x0A00 +#define PHY_SSCCR2_TIME0 0x001C +#define PHY_SSCCR2_TIME2_WIDTH 0x0003 + #define PHY_RCR2 0x03 +#define PHY_RCR2_EMPHASE_EN 0x8000 +#define PHY_RCR2_NADJR 0x4000 +#define PHY_RCR2_CDR_SR_2 0x0100 +#define PHY_RCR2_FREQSEL_12 0x0040 +#define PHY_RCR2_CDR_SC_12P 0x0010 +#define PHY_RCR2_CALIB_LATE 0x0002 +#define PHY_RCR2_INIT_27S 0xC152 +#define PHY_SSCCR3 0x03 +#define PHY_SSCCR3_STEP_IN 0x2740 +#define PHY_SSCCR3_CHECK_DELAY 0x0008 +#define _PHY_ANA03 0x03 +#define _PHY_ANA03_TIMER_MAX 0x2700 +#define _PHY_ANA03_OOBS_DEB_EN 0x0040 +#define _PHY_CMU_DEBUG_EN 0x0008 + #define PHY_RTCR 0x04 #define PHY_RDR 0x05 +#define PHY_RDR_RXDSEL_1_9 0x4000 +#define PHY_SSC_AUTO_PWD 0x0600 #define PHY_TCR0 0x06 #define PHY_TCR1 0x07 #define PHY_TUNE 0x08 +#define PHY_TUNE_TUNEREF_1_0 0x4000 +#define PHY_TUNE_VBGSEL_1252 0x0C00 +#define PHY_TUNE_SDBUS_33 0x0200 +#define PHY_TUNE_TUNED18 0x01C0 +#define PHY_TUNE_TUNED12 0X0020 +#define PHY_TUNE_TUNEA12 0x0004 +#define PHY_TUNE_VOLTAGE_MASK 0xFC3F +#define PHY_TUNE_VOLTAGE_3V3 0x03C0 +#define PHY_TUNE_D18_1V8 0x0100 +#define PHY_TUNE_D18_1V7 0x0080 +#define PHY_ANA08 0x08 +#define PHY_ANA08_RX_EQ_DCGAIN 0x5000 +#define PHY_ANA08_SEL_RX_EN 0x0400 +#define PHY_ANA08_RX_EQ_VAL 0x03C0 +#define PHY_ANA08_SCP 0x0020 +#define PHY_ANA08_SEL_IPI 0x0004 + #define PHY_IMR 0x09 #define PHY_BPCR 0x0A +#define PHY_BPCR_IBRXSEL 0x0400 +#define PHY_BPCR_IBTXSEL 0x0100 +#define PHY_BPCR_IB_FILTER 0x0080 +#define PHY_BPCR_CMIRROR_EN 0x0040 + #define PHY_BIST 0x0B #define PHY_RAW_L 0x0C #define PHY_RAW_H 0x0D @@ -710,6 +773,7 @@ #define PHY_HOST_CLK_CTRL 0x0F #define PHY_DMR 0x10 #define PHY_BACR 0x11 +#define PHY_BACR_BASIC_MASK 0xFFF3 #define PHY_IER 0x12 #define PHY_BCSR 0x13 #define PHY_BPR 0x14 @@ -717,14 +781,73 @@ #define PHY_BPNR 0x16 #define PHY_BRNR2 0x17 #define PHY_BENR 0x18 -#define PHY_REG_REV 0x19 +#define PHY_REV 0x19 +#define PHY_REV_RESV 0xE000 +#define PHY_REV_RXIDLE_LATCHED 0x1000 +#define PHY_REV_P1_EN 0x0800 +#define PHY_REV_RXIDLE_EN 0x0400 +#define PHY_REV_CLKREQ_TX_EN 0x0200 +#define PHY_REV_CLKREQ_RX_EN 0x0100 +#define PHY_REV_CLKREQ_DT_1_0 0x0040 +#define PHY_REV_STOP_CLKRD 0x0020 +#define PHY_REV_RX_PWST 0x0008 +#define PHY_REV_STOP_CLKWR 0x0004 +#define _PHY_REV0 0x19 +#define _PHY_REV0_FILTER_OUT 0x3800 +#define _PHY_REV0_CDR_BYPASS_PFD 0x0100 +#define _PHY_REV0_CDR_RX_IDLE_BYPASS 0x0002 + #define PHY_FLD0 0x1A +#define PHY_ANA1A 0x1A +#define PHY_ANA1A_TXR_LOOPBACK 0x2000 +#define PHY_ANA1A_RXT_BIST 0x0500 +#define PHY_ANA1A_TXR_BIST 0x0040 +#define PHY_ANA1A_REV 0x0006 +#define PHY_FLD0_INIT_27S 0x2546 #define PHY_FLD1 0x1B #define PHY_FLD2 0x1C #define PHY_FLD3 0x1D +#define PHY_FLD3_TIMER_4 0x0800 +#define PHY_FLD3_TIMER_6 0x0020 +#define PHY_FLD3_RXDELINK 0x0004 +#define PHY_FLD3_INIT_27S 0x0004 +#define PHY_ANA1D 0x1D +#define PHY_ANA1D_DEBUG_ADDR 0x0004 +#define _PHY_FLD0 0x1D +#define _PHY_FLD0_CLK_REQ_20C 0x8000 +#define _PHY_FLD0_RX_IDLE_EN 0x1000 +#define _PHY_FLD0_BIT_ERR_RSTN 0x0800 +#define _PHY_FLD0_BER_COUNT 0x01E0 +#define _PHY_FLD0_BER_TIMER 0x001E +#define _PHY_FLD0_CHECK_EN 0x0001 + #define PHY_FLD4 0x1E +#define PHY_FLD4_FLDEN_SEL 0x4000 +#define PHY_FLD4_REQ_REF 0x2000 +#define PHY_FLD4_RXAMP_OFF 0x1000 +#define PHY_FLD4_REQ_ADDA 0x0800 +#define PHY_FLD4_BER_COUNT 0x00E0 +#define PHY_FLD4_BER_TIMER 0x000A +#define PHY_FLD4_BER_CHK_EN 0x0001 +#define PHY_FLD4_INIT_27S 0x5C7F +#define PHY_DIG1E 0x1E +#define PHY_DIG1E_REV 0x4000 +#define PHY_DIG1E_D0_X_D1 0x1000 +#define PHY_DIG1E_RX_ON_HOST 0x0800 +#define PHY_DIG1E_RCLK_REF_HOST 0x0400 +#define PHY_DIG1E_RCLK_TX_EN_KEEP 0x0040 +#define PHY_DIG1E_RCLK_TX_TERM_KEEP 0x0020 +#define PHY_DIG1E_RCLK_RX_EIDLE_ON 0x0010 +#define PHY_DIG1E_TX_TERM_KEEP 0x0008 +#define PHY_DIG1E_RX_TERM_KEEP 0x0004 +#define PHY_DIG1E_TX_EN_KEEP 0x0002 +#define PHY_DIG1E_RX_EN_KEEP 0x0001 #define PHY_DUM_REG 0x1F +#define PCR_SETTING_REG1 0x724 +#define PCR_SETTING_REG2 0x814 +#define PCR_SETTING_REG3 0x747 + #define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0) struct rtsx_pcr; @@ -734,6 +857,8 @@ }; struct pcr_ops { + int (*write_phy)(struct rtsx_pcr *pcr, u8 addr, u16 val); + int (*read_phy)(struct rtsx_pcr *pcr, u8 addr, u16 *val); int (*extra_init_hw)(struct rtsx_pcr *pcr); int (*optimize_phy)(struct rtsx_pcr *pcr); int (*turn_on_led)(struct rtsx_pcr *pcr); @@ -746,6 +871,8 @@ u8 voltage); unsigned int (*cd_deglitch)(struct rtsx_pcr *pcr); int (*conv_clk_and_div_n)(int clk, int dir); + void (*fetch_vendor_settings)(struct rtsx_pcr *pcr); + void (*force_power_down)(struct rtsx_pcr *pcr, u8 pm_state); }; enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN}; @@ -753,6 +880,7 @@ struct rtsx_pcr { struct pci_dev *pci; unsigned int id; + int pcie_cap; /* pci resources */ unsigned long addr; @@ -787,7 +915,6 @@ struct completion *finish_me; unsigned int cur_clock; - bool ms_pmos; bool remove_pci; bool msi_en; @@ -805,6 +932,19 @@ #define IC_VER_D 3 u8 ic_version; + u8 sd30_drive_sel_1v8; + u8 sd30_drive_sel_3v3; + u8 card_drive_sel; +#define ASPM_L1_EN 0x02 + u8 aspm_en; + +#define PCR_MS_PMOS (1 << 0) +#define PCR_REVERSE_SOCKET (1 << 1) + u32 flags; + + u32 tx_initial_phase; + u32 rx_initial_phase; + const u32 *sd_pull_ctl_enable_tbl; const u32 *sd_pull_ctl_disable_tbl; const u32 *ms_pull_ctl_enable_tbl; @@ -813,6 +953,8 @@ const struct pcr_ops *ops; enum PDEV_STAT state; + u16 reg_pm_ctrl3; + int num_slots; struct rtsx_slot *slots; }; @@ -820,6 +962,22 @@ #define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid)) #define PCI_VID(pcr) ((pcr)->pci->vendor) #define PCI_PID(pcr) ((pcr)->pci->device) +#define is_version(pcr, pid, ver) \ + (CHK_PCI_PID(pcr, pid) && (pcr)->ic_version == (ver)) +#define pcr_dbg(pcr, fmt, arg...) \ + dev_dbg(&(pcr)->pci->dev, fmt, ##arg) + +#define SDR104_PHASE(val) ((val) & 0xFF) +#define SDR50_PHASE(val) (((val) >> 8) & 0xFF) +#define DDR50_PHASE(val) (((val) >> 16) & 0xFF) +#define SDR104_TX_PHASE(pcr) SDR104_PHASE((pcr)->tx_initial_phase) +#define SDR50_TX_PHASE(pcr) SDR50_PHASE((pcr)->tx_initial_phase) +#define DDR50_TX_PHASE(pcr) DDR50_PHASE((pcr)->tx_initial_phase) +#define SDR104_RX_PHASE(pcr) SDR104_PHASE((pcr)->rx_initial_phase) +#define SDR50_RX_PHASE(pcr) SDR50_PHASE((pcr)->rx_initial_phase) +#define DDR50_RX_PHASE(pcr) DDR50_PHASE((pcr)->rx_initial_phase) +#define SET_CLOCK_PHASE(sdr104, sdr50, ddr50) \ + (((ddr50) << 16) | ((sdr50) << 8) | (sdr104)) void rtsx_pci_start_run(struct rtsx_pcr *pcr); int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data); @@ -833,6 +991,12 @@ int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout); int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist, int num_sg, bool read, int timeout); +int rtsx_pci_dma_map_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist, + int num_sg, bool read); +void rtsx_pci_dma_unmap_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist, + int num_sg, bool read); +int rtsx_pci_dma_transfer(struct rtsx_pcr *pcr, struct scatterlist *sglist, + int count, bool read, int timeout); int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card); @@ -851,4 +1015,37 @@ return (u8 *)(pcr->host_cmds_ptr); } +static inline int rtsx_pci_update_cfg_byte(struct rtsx_pcr *pcr, int addr, + u8 mask, u8 append) +{ + int err; + u8 val; + + err = pci_read_config_byte(pcr->pci, addr, &val); + if (err < 0) + return err; + return pci_write_config_byte(pcr->pci, addr, (val & mask) | append); +} + +static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val) +{ + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg, 0xFF, val >> 24); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 1, 0xFF, val >> 16); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 2, 0xFF, val >> 8); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val); +} + +static inline int rtsx_pci_update_phy(struct rtsx_pcr *pcr, u8 addr, + u16 mask, u16 append) +{ + int err; + u16 val; + + err = rtsx_pci_read_phy_register(pcr, addr, &val); + if (err < 0) + return err; + + return rtsx_pci_write_phy_register(pcr, addr, (val & mask) | append); +} + #endif