--- zzzz-none-000/linux-3.10.107/include/linux/mfd/samsung/core.h	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/include/linux/mfd/samsung/core.h	2021-02-04 17:41:59.000000000 +0000
@@ -14,48 +14,63 @@
 #ifndef __LINUX_MFD_SEC_CORE_H
 #define __LINUX_MFD_SEC_CORE_H
 
-#define NUM_IRQ_REGS	4
+/* Macros to represent minimum voltages for LDO/BUCK */
+#define MIN_3000_MV		3000000
+#define MIN_2500_MV		2500000
+#define MIN_2000_MV		2000000
+#define MIN_1800_MV		1800000
+#define MIN_1500_MV		1500000
+#define MIN_1400_MV		1400000
+#define MIN_1000_MV		1000000
+
+#define MIN_900_MV		900000
+#define MIN_850_MV		850000
+#define MIN_800_MV		800000
+#define MIN_750_MV		750000
+#define MIN_600_MV		600000
+#define MIN_500_MV		500000
+
+/* Macros to represent steps for LDO/BUCK */
+#define STEP_50_MV		50000
+#define STEP_25_MV		25000
+#define STEP_12_5_MV		12500
+#define STEP_6_25_MV		6250
 
 enum sec_device_type {
 	S5M8751X,
 	S5M8763X,
 	S5M8767X,
+	S2MPA01,
 	S2MPS11X,
+	S2MPS13X,
+	S2MPS14X,
+	S2MPU02,
 };
 
 /**
- * struct sec_pmic_dev - s5m87xx master device for sub-drivers
- * @dev: master device of the chip (can be used to access platform data)
- * @pdata: pointer to private data used to pass platform data to child
- * @i2c: i2c client private data for regulator
- * @rtc: i2c client private data for rtc
- * @iolock: mutex for serializing io access
- * @irqlock: mutex for buslock
- * @irq_base: base IRQ number for sec-pmic, required for IRQs
- * @irq: generic IRQ number for s5m87xx
- * @ono: power onoff IRQ number for s5m87xx
- * @irq_masks_cur: currently active value
- * @irq_masks_cache: cached hardware value
- * @type: indicate which s5m87xx "variant" is used
+ * struct sec_pmic_dev - s2m/s5m master device for sub-drivers
+ * @dev:		Master device of the chip
+ * @pdata:		Platform data populated with data from DTS
+ *			or board files
+ * @regmap_pmic:	Regmap associated with PMIC's I2C address
+ * @i2c:		I2C client of the main driver
+ * @device_type:	Type of device, matches enum sec_device_type
+ * @irq_base:		Base IRQ number for device, required for IRQs
+ * @irq:		Generic IRQ number for device
+ * @irq_data:		Runtime data structure for IRQ controller
+ * @wakeup:		Whether or not this is a wakeup device
  */
 struct sec_pmic_dev {
 	struct device *dev;
 	struct sec_platform_data *pdata;
-	struct regmap *regmap;
+	struct regmap *regmap_pmic;
 	struct i2c_client *i2c;
-	struct i2c_client *rtc;
-	struct mutex iolock;
-	struct mutex irqlock;
 
-	int device_type;
+	unsigned long device_type;
 	int irq_base;
 	int irq;
 	struct regmap_irq_chip_data *irq_data;
 
-	int ono;
-	u8 irq_masks_cur[NUM_IRQ_REGS];
-	u8 irq_masks_cache[NUM_IRQ_REGS];
-	int type;
 	bool wakeup;
 };
 
@@ -63,12 +78,6 @@
 void sec_irq_exit(struct sec_pmic_dev *sec_pmic);
 int sec_irq_resume(struct sec_pmic_dev *sec_pmic);
 
-extern int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest);
-extern int sec_bulk_read(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf);
-extern int sec_reg_write(struct sec_pmic_dev *sec_pmic, u8 reg, u8 value);
-extern int sec_bulk_write(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf);
-extern int sec_reg_update(struct sec_pmic_dev *sec_pmic, u8 reg, u8 val, u8 mask);
-
 struct sec_platform_data {
 	struct sec_regulator_data	*regulators;
 	struct sec_opmode_data		*opmode;
@@ -78,7 +87,6 @@
 	int				irq_base;
 	int				(*cfg_pmic_irq)(void);
 
-	int				ono;
 	bool				wakeup;
 	bool				buck_voltage_lock;
 
@@ -102,7 +110,7 @@
 	int				buck3_default_idx;
 	int				buck4_default_idx;
 
-	int                             buck_ramp_delay;
+	int				buck_ramp_delay;
 
 	int				buck2_ramp_delay;
 	int				buck34_ramp_delay;
@@ -110,15 +118,24 @@
 	int				buck16_ramp_delay;
 	int				buck7810_ramp_delay;
 	int				buck9_ramp_delay;
-
-	bool                            buck2_ramp_enable;
-	bool                            buck3_ramp_enable;
-	bool                            buck4_ramp_enable;
+	int				buck24_ramp_delay;
+	int				buck3_ramp_delay;
+	int				buck7_ramp_delay;
+	int				buck8910_ramp_delay;
+
+	bool				buck1_ramp_enable;
+	bool				buck2_ramp_enable;
+	bool				buck3_ramp_enable;
+	bool				buck4_ramp_enable;
 	bool				buck6_ramp_enable;
 
 	int				buck2_init;
 	int				buck3_init;
 	int				buck4_init;
+	/* Whether or not manually set PWRHOLD to low during shutdown. */
+	bool				manual_poweroff;
+	/* Disable the WRSTBI (buck voltage warm reset) when probing? */
+	bool				disable_wrstbi;
 };
 
 /**
@@ -129,7 +146,8 @@
 struct sec_regulator_data {
 	int				id;
 	struct regulator_init_data	*initdata;
-	struct device_node *reg_node;
+	struct device_node		*reg_node;
+	int				ext_control_gpio;
 };
 
 /*