--- zzzz-none-000/linux-3.10.107/include/linux/serial_core.h 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/include/linux/serial_core.h 2021-02-04 17:41:59.000000000 +0000 @@ -31,6 +31,13 @@ #include #include +#ifdef CONFIG_SERIAL_CORE_CONSOLE +#define uart_console(port) \ + ((port)->cons && (port)->cons->index == (port)->line) +#else +#define uart_console(port) ({ (void)port; 0; }) +#endif + struct uart_port; struct serial_struct; struct device; @@ -56,10 +63,9 @@ void (*flush_buffer)(struct uart_port *); void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); - void (*set_ldisc)(struct uart_port *, int new); + void (*set_ldisc)(struct uart_port *, struct ktermios *); void (*pm)(struct uart_port *, unsigned int state, unsigned int oldstate); - int (*set_wake)(struct uart_port *, unsigned int state); /* * Return a string describing the type of the port @@ -106,6 +112,7 @@ }; typedef unsigned int __bitwise__ upf_t; +typedef unsigned int __bitwise__ upstat_t; struct uart_port { spinlock_t lock; /* port lock */ @@ -116,10 +123,17 @@ void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); + void (*set_mctrl)(struct uart_port *, unsigned int); + int (*startup)(struct uart_port *port); + void (*shutdown)(struct uart_port *port); + void (*throttle)(struct uart_port *port); + void (*unthrottle)(struct uart_port *port); int (*handle_irq)(struct uart_port *); void (*pm)(struct uart_port *, unsigned int state, unsigned int old); void (*handle_break)(struct uart_port *); + int (*rs485_config)(struct uart_port *, + struct serial_rs485 *rs485); unsigned int irq; /* irq number */ unsigned long irqflags; /* irq flags */ unsigned int uartclk; /* base uart clock */ @@ -129,12 +143,13 @@ unsigned char iotype; /* io access style */ unsigned char unused1; -#define UPIO_PORT (0) -#define UPIO_HUB6 (1) -#define UPIO_MEM (2) -#define UPIO_MEM32 (3) -#define UPIO_AU (4) /* Au1x00 and RT288x type IO */ -#define UPIO_TSI (5) /* Tsi108/109 type IO */ +#define UPIO_PORT (SERIAL_IO_PORT) /* 8b I/O port access */ +#define UPIO_HUB6 (SERIAL_IO_HUB6) /* Hub6 ISA card */ +#define UPIO_MEM (SERIAL_IO_MEM) /* 8b MMIO access */ +#define UPIO_MEM32 (SERIAL_IO_MEM32) /* 32b little endian */ +#define UPIO_AU (SERIAL_IO_AU) /* Au1x00 and RT288x type IO */ +#define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */ +#define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ @@ -146,25 +161,40 @@ unsigned long sysrq; /* sysrq timeout */ #endif + /* flags must be updated while holding port mutex */ upf_t flags; -#define UPF_FOURPORT ((__force upf_t) (1 << 1)) -#define UPF_SAK ((__force upf_t) (1 << 2)) -#define UPF_SPD_MASK ((__force upf_t) (0x1030)) -#define UPF_SPD_HI ((__force upf_t) (0x0010)) -#define UPF_SPD_VHI ((__force upf_t) (0x0020)) -#define UPF_SPD_CUST ((__force upf_t) (0x0030)) -#define UPF_SPD_SHI ((__force upf_t) (0x1000)) -#define UPF_SPD_WARP ((__force upf_t) (0x1010)) -#define UPF_SKIP_TEST ((__force upf_t) (1 << 6)) -#define UPF_AUTO_IRQ ((__force upf_t) (1 << 7)) -#define UPF_HARDPPS_CD ((__force upf_t) (1 << 11)) -#define UPF_LOW_LATENCY ((__force upf_t) (1 << 13)) -#define UPF_BUGGY_UART ((__force upf_t) (1 << 14)) + /* + * These flags must be equivalent to the flags defined in + * include/uapi/linux/tty_flags.h which are the userspace definitions + * assigned from the serial_struct flags in uart_set_info() + * [for bit definitions in the UPF_CHANGE_MASK] + * + * Bits [0..UPF_LAST_USER] are userspace defined/visible/changeable + * except bit 15 (UPF_NO_TXEN_TEST) which is masked off. + * The remaining bits are serial-core specific and not modifiable by + * userspace. + */ +#define UPF_FOURPORT ((__force upf_t) ASYNC_FOURPORT /* 1 */ ) +#define UPF_SAK ((__force upf_t) ASYNC_SAK /* 2 */ ) +#define UPF_SPD_HI ((__force upf_t) ASYNC_SPD_HI /* 4 */ ) +#define UPF_SPD_VHI ((__force upf_t) ASYNC_SPD_VHI /* 5 */ ) +#define UPF_SPD_CUST ((__force upf_t) ASYNC_SPD_CUST /* 0x0030 */ ) +#define UPF_SPD_WARP ((__force upf_t) ASYNC_SPD_WARP /* 0x1010 */ ) +#define UPF_SPD_MASK ((__force upf_t) ASYNC_SPD_MASK /* 0x1030 */ ) +#define UPF_SKIP_TEST ((__force upf_t) ASYNC_SKIP_TEST /* 6 */ ) +#define UPF_AUTO_IRQ ((__force upf_t) ASYNC_AUTO_IRQ /* 7 */ ) +#define UPF_HARDPPS_CD ((__force upf_t) ASYNC_HARDPPS_CD /* 11 */ ) +#define UPF_SPD_SHI ((__force upf_t) ASYNC_SPD_SHI /* 12 */ ) +#define UPF_LOW_LATENCY ((__force upf_t) ASYNC_LOW_LATENCY /* 13 */ ) +#define UPF_BUGGY_UART ((__force upf_t) ASYNC_BUGGY_UART /* 14 */ ) #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15)) -#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) -/* Port has hardware-assisted h/w flow control (iow, auto-RTS *not* auto-CTS) */ -#define UPF_HARD_FLOW ((__force upf_t) (1 << 21)) +#define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ ) + +/* Port has hardware-assisted h/w flow control */ +#define UPF_AUTO_CTS ((__force upf_t) (1 << 20)) +#define UPF_AUTO_RTS ((__force upf_t) (1 << 21)) +#define UPF_HARD_FLOW ((__force upf_t) (UPF_AUTO_CTS | UPF_AUTO_RTS)) /* Port has hardware-assisted s/w flow control */ #define UPF_SOFT_FLOW ((__force upf_t) (1 << 22)) #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) @@ -178,21 +208,44 @@ #define UPF_DEAD ((__force upf_t) (1 << 30)) #define UPF_IOREMAP ((__force upf_t) (1 << 31)) -#define UPF_CHANGE_MASK ((__force upf_t) (0x17fff)) +#define __UPF_CHANGE_MASK 0x17fff +#define UPF_CHANGE_MASK ((__force upf_t) __UPF_CHANGE_MASK) #define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY)) +#if __UPF_CHANGE_MASK > ASYNC_FLAGS +#error Change mask not equivalent to userspace-visible bit defines +#endif + + /* + * Must hold termios_rwsem, port mutex and port lock to change; + * can hold any one lock to read. + */ + upstat_t status; + +#define UPSTAT_CTS_ENABLE ((__force upstat_t) (1 << 0)) +#define UPSTAT_DCD_ENABLE ((__force upstat_t) (1 << 1)) +#define UPSTAT_AUTORTS ((__force upstat_t) (1 << 2)) +#define UPSTAT_AUTOCTS ((__force upstat_t) (1 << 3)) +#define UPSTAT_AUTOXOFF ((__force upstat_t) (1 << 4)) + + int hw_stopped; /* sw-assisted CTS flow state */ unsigned int mctrl; /* current modem ctrl settings */ unsigned int timeout; /* character-based timeout */ unsigned int type; /* port type */ const struct uart_ops *ops; unsigned int custom_divisor; unsigned int line; /* port index */ + unsigned int minor; resource_size_t mapbase; /* for ioremap */ + resource_size_t mapsize; struct device *dev; /* parent device */ unsigned char hub6; /* this should be in the 8250 driver */ unsigned char suspended; unsigned char irq_wake; unsigned char unused[2]; + struct attribute_group *attr_group; /* port specific attributes */ + const struct attribute_group **tty_groups; /* all attributes (serial core use only) */ + struct serial_rs485 rs485; void *private_data; /* generic platform data pointer */ }; @@ -279,8 +332,39 @@ /* * Console helpers. */ +struct earlycon_device { + struct console *con; + struct uart_port port; + char options[16]; /* e.g., 115200n8 */ + unsigned int baud; +}; + +struct earlycon_id { + char name[16]; + char compatible[128]; + int (*setup)(struct earlycon_device *, const char *options); +} __aligned(32); + +extern const struct earlycon_id __earlycon_table[]; +extern const struct earlycon_id __earlycon_table_end[]; + +#define OF_EARLYCON_DECLARE(_name, compat, fn) \ + static const struct earlycon_id __UNIQUE_ID(__earlycon_##_name) \ + __used __section(__earlycon_table) \ + = { .name = __stringify(_name), \ + .compatible = compat, \ + .setup = fn } + +#define EARLYCON_DECLARE(_name, fn) OF_EARLYCON_DECLARE(_name, "", fn) + +extern int setup_earlycon(char *buf); +extern int of_setup_earlycon(unsigned long addr, + int (*setup)(struct earlycon_device *, const char *)); + struct uart_port *uart_get_console(struct uart_port *ports, int nr, struct console *c); +int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr, + char **options); void uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow); int uart_set_options(struct uart_port *port, struct console *co, int baud, @@ -317,11 +401,23 @@ static inline int uart_tx_stopped(struct uart_port *port) { struct tty_struct *tty = port->state->port.tty; - if(tty->stopped || tty->hw_stopped) + if (tty->stopped || port->hw_stopped) return 1; return 0; } +static inline bool uart_cts_enabled(struct uart_port *uport) +{ + return !!(uport->status & UPSTAT_CTS_ENABLE); +} + +static inline bool uart_softcts_mode(struct uart_port *uport) +{ + upstat_t mask = UPSTAT_CTS_ENABLE | UPSTAT_AUTOCTS; + + return ((uport->status & mask) == UPSTAT_CTS_ENABLE); +} + /* * The following are helper functions for the low level drivers. */