--- zzzz-none-000/linux-3.10.107/include/linux/usb/hcd.h 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/include/linux/usb/hcd.h 2021-02-04 17:41:59.000000000 +0000 @@ -22,6 +22,12 @@ #ifdef __KERNEL__ #include +#include +#include + +#ifdef CONFIG_AVM_NET_TRACE +#include "avmusbtrace.h" +#endif #define MAX_TOPO_LEVEL 6 @@ -57,16 +63,18 @@ * * Since "struct usb_bus" is so thin, you can't share much code in it. * This framework is a layer over that, and should be more sharable. - * - * @authorized_default: Specifies if new devices are authorized to - * connect by default or they require explicit - * user space authorization; this bit is settable - * through /sys/class/usb_host/X/authorized_default. - * For the rest is RO, so we don't lock to r/w it. */ /*-------------------------------------------------------------------------*/ +struct giveback_urb_bh { + bool running; + spinlock_t lock; + struct list_head head; + struct tasklet_struct bh; + struct usb_host_endpoint *completing_ep; +}; + struct usb_hcd { /* @@ -84,7 +92,7 @@ struct timer_list rh_timer; /* drives root-hub polling */ struct urb *status_urb; /* the current status urb */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM struct work_struct wakeup_work; /* for remote wakeup */ #endif @@ -97,7 +105,8 @@ * OTG and some Host controllers need software interaction with phys; * other external phys should be software-transparent */ - struct usb_phy *phy; + struct usb_phy *usb_phy; + struct phy *phy; /* Flags that need to be manipulated atomically because they can * change while the host controller is running. Always use @@ -110,6 +119,8 @@ #define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */ #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */ #define HCD_FLAG_DEAD 6 /* controller has died? */ +#define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */ +#define HCD_FLAG_DEV_AUTHORIZED 8 /* authorize devices? */ /* The flags can be tested using these macros; they are likely to * be slightly faster than test_bit(). @@ -121,17 +132,41 @@ #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING)) #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD)) + /* + * Specifies if interfaces are authorized by default + * or they require explicit user space authorization; this bit is + * settable through /sys/class/usb_host/X/interface_authorized_default + */ +#define HCD_INTF_AUTHORIZED(hcd) \ + ((hcd)->flags & (1U << HCD_FLAG_INTF_AUTHORIZED)) + + /* + * Specifies if devices are authorized by default + * or they require explicit user space authorization; this bit is + * settable through /sys/class/usb_host/X/authorized_default + */ +#define HCD_DEV_AUTHORIZED(hcd) \ + ((hcd)->flags & (1U << HCD_FLAG_DEV_AUTHORIZED)) + /* Flags that get set only during HCD registration or removal. */ unsigned rh_registered:1;/* is root hub registered? */ unsigned rh_pollable:1; /* may we poll the root hub? */ unsigned msix_enabled:1; /* driver has MSI-X enabled? */ + unsigned remove_phy:1; /* auto-remove USB phy */ /* The next flag is a stopgap, to be removed when all the HCDs * support the new root-hub polling mechanism. */ unsigned uses_new_polling:1; unsigned wireless:1; /* Wireless USB HCD */ - unsigned authorized_default:1; unsigned has_tt:1; /* Integrated TT in root hub */ + unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */ + unsigned can_do_streams:1; /* HC supports streams */ + unsigned tpl_support:1; /* OTG & EH TPL support */ + unsigned usb3_dev_reset_quirk:1; /* USB device reset + * quirk. + */ + unsigned cant_recv_wakeups:1; + /* wakeup requests from downstream aren't received */ unsigned int irq; /* irq allocated */ void __iomem *regs; /* device memory/io */ @@ -139,6 +174,9 @@ resource_size_t rsrc_len; /* memory/io resource length */ unsigned power_budget; /* in mA, 0 = no limit */ + struct giveback_urb_bh high_prio_bh; + struct giveback_urb_bh low_prio_bh; + /* bandwidth_mutex should be taken before adding or removing * any new bus bandwidth constraints: * 1. Before adding a configuration for a new device. @@ -150,10 +188,12 @@ * bandwidth_mutex should be dropped after a successful control message * to the device, or resetting the bandwidth after a failed attempt. */ + struct mutex *address0_mutex; struct mutex *bandwidth_mutex; struct usb_hcd *shared_hcd; struct usb_hcd *primary_hcd; + struct usb_susphy *susphy; #define HCD_BUFFER_POOLS 4 struct dma_pool *pool[HCD_BUFFER_POOLS]; @@ -177,6 +217,10 @@ * input size of periodic table to an interrupt scheduler. * (ohci 32, uhci 1024, ehci 256/512/1024). */ + +#ifdef AVM_USB_TRACE + struct avm_net_trace_device *avm_ntd; +#endif /* The HC driver's private data is stored at the end of * this structure. @@ -218,8 +262,11 @@ #define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */ #define HCD_USB11 0x0010 /* USB 1.1 */ #define HCD_USB2 0x0020 /* USB 2.0 */ +#define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/ #define HCD_USB3 0x0040 /* USB 3.0 */ +#define HCD_USB31 0x0050 /* USB 3.1 */ #define HCD_MASK 0x0070 +#define HCD_BH 0x0100 /* URB complete in BH context */ /* called to init HCD and root hub */ int (*reset) (struct usb_hcd *hcd); @@ -337,6 +384,8 @@ void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); /* Returns the hardware-chosen device address */ int (*address_device)(struct usb_hcd *, struct usb_device *udev); + /* prepares the hardware to send commands to the device */ + int (*enable_device)(struct usb_hcd *, struct usb_device *udev); /* Notifies the HCD after a hub descriptor is fetched. * Will block. */ @@ -358,8 +407,22 @@ int (*disable_usb3_lpm_timeout)(struct usb_hcd *, struct usb_device *, enum usb3_link_state state); int (*find_raw_port_number)(struct usb_hcd *, int); + /* Call for power on/off the port if necessary */ + int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable); + }; +static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd) +{ + return hcd->driver->flags & HCD_BH; +} + +static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + return hcd->high_prio_bh.completing_ep == ep; +} + extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, int status); @@ -410,6 +473,15 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev); extern void usb_hcd_pci_shutdown(struct pci_dev *dev); +#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS +extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); +#else +static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev) +{ + return 0; +} +#endif + #ifdef CONFIG_PM extern const struct dev_pm_ops usb_hcd_pci_pm_ops; #endif @@ -479,6 +551,7 @@ struct usb_device *hub; /* upstream highspeed hub */ int multi; /* true means one TT per port */ unsigned think_time; /* think time in ns */ + void *hcpriv; /* HCD private data */ /* for control/bulk error recovery (CLEAR_TT_BUFFER) */ spinlock_t lock; @@ -524,9 +597,9 @@ /*-------------------------------------------------------------------------*/ -/* class requests from USB 3.0 hub spec, table 10-5 */ -#define SetHubDepth (0x3000 | HUB_SET_DEPTH) -#define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT) +/* class requests from USB 3.1 hub spec, table 10-7 */ +#define SetHubDepth (0x2000 | HUB_SET_DEPTH) +#define GetPortErrorCount (0xa300 | HUB_GET_PORT_ERR_COUNT) /* * Generic bandwidth allocation constants/support @@ -537,9 +610,8 @@ * of (7/6 * 8 * bytecount) = 9.33 * bytecount */ /* bytecount = data payload byte count */ -#define NS_TO_US(ns) ((ns + 500L) / 1000L) - /* convert & round nanoseconds to microseconds */ - +#define NS_TO_US(ns) DIV_ROUND_UP(ns, 1000L) + /* convert nanoseconds to microseconds, rounding up */ /* * Full/low speed bandwidth allocation constants/support. @@ -583,8 +655,6 @@ extern struct mutex usb_bus_list_lock; extern wait_queue_head_t usb_kill_urb_queue; -extern int usb_find_interface_driver(struct usb_device *dev, - struct usb_interface *interface); #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) @@ -592,16 +662,13 @@ extern void usb_root_hub_lost_power(struct usb_device *rhdev); extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg); extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg); -#endif /* CONFIG_PM */ - -#ifdef CONFIG_PM_RUNTIME extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); #else static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) { return; } -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/