--- zzzz-none-000/linux-3.10.107/include/linux/usb.h 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/include/linux/usb.h 2021-02-04 17:41:59.000000000 +0000 @@ -57,6 +57,7 @@ * @extra: descriptors following this endpoint in the configuration * @extralen: how many bytes of "extra" are valid * @enabled: URBs may be submitted to this endpoint + * @streams: number of USB-3 streams allocated on the endpoint * * USB requests are always queued to a given endpoint, identified by a * descriptor within an active interface in a given USB configuration. @@ -71,6 +72,7 @@ unsigned char *extra; /* Extra descriptors */ int extralen; int enabled; + int streams; }; /* host-side wrapper for one interface setting's parsed descriptors */ @@ -80,7 +82,7 @@ int extralen; unsigned char *extra; /* Extra descriptors */ - /* array of desc.bNumEndpoint endpoints associated with this + /* array of desc.bNumEndpoints endpoints associated with this * interface setting. these will be in no particular order. */ struct usb_host_endpoint *endpoint; @@ -120,15 +122,13 @@ * has been deferred. * @needs_binding: flag set when the driver should be re-probed or unbound * following a reset or suspend operation it doesn't support. + * @authorized: This allows to (de)authorize individual interfaces instead + * a whole device in contrast to the device authorization. * @dev: driver model's view of this device * @usb_dev: if an interface is bound to the USB major, this will point * to the sysfs representation for that device. * @pm_usage_cnt: PM usage counter for this interface * @reset_ws: Used for scheduling resets from atomic context. - * @reset_running: set to 1 if the interface is currently running a - * queued reset so that usb_cancel_queued_reset() doesn't try to - * remove from the workqueue when running inside the worker - * thread. See __usb_queue_reset_device(). * @resetting_device: USB core reset the device, so use alt setting 0 as * current; needs bandwidth alloc after reset. * @@ -179,8 +179,8 @@ unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */ unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */ unsigned needs_binding:1; /* needs delayed unbind/rebind */ - unsigned reset_running:1; unsigned resetting_device:1; /* true: bandwidth alloc after reset */ + unsigned authorized:1; /* used for interface authorization */ struct device dev; /* interface specific device info */ struct device *usb_dev; @@ -202,6 +202,8 @@ struct usb_interface *usb_get_intf(struct usb_interface *intf); void usb_put_intf(struct usb_interface *intf); +/* Hard limit */ +#define USB_MAXENDPOINTS 30 /* this maximum is arbitrary */ #define USB_MAXINTERFACES 32 #define USB_MAXIADS (USB_MAXINTERFACES/2) @@ -326,15 +328,16 @@ /* wireless cap descriptor is handled by wusb */ struct usb_ext_cap_descriptor *ext_cap; struct usb_ss_cap_descriptor *ss_cap; + struct usb_ssp_cap_descriptor *ssp_cap; struct usb_ss_container_id_descriptor *ss_id; }; int __usb_get_extra_descriptor(char *buffer, unsigned size, - unsigned char type, void **ptr); + unsigned char type, void **ptr, size_t min); #define usb_get_extra_descriptor(ifpoint, type, ptr) \ __usb_get_extra_descriptor((ifpoint)->extra, \ (ifpoint)->extralen, \ - type, (void **)ptr) + type, (void **)ptr, sizeof(**(ptr))) /* ----------------------------------------------------------------------- */ @@ -363,10 +366,12 @@ * the ep queue on a short transfer * with the URB_SHORT_NOT_OK flag set. */ + unsigned no_sg_constraint:1; /* no sg constraint */ unsigned sg_tablesize; /* 0 or largest number of sg list entries */ int devnum_next; /* Next open device number in * round-robin allocation */ + struct mutex devnum_next_mutex; /* devnum_next mutex */ struct usb_devmap devmap; /* device address allocation map */ struct usb_device *root_hub; /* Root hub */ @@ -391,18 +396,9 @@ #endif }; -/* ----------------------------------------------------------------------- */ +struct usb_dev_state; -/* This is arbitrary. - * From USB 2.0 spec Table 11-13, offset 7, a hub can - * have up to 255 ports. The most yet reported is 10. - * - * Current Wireless USB host hardware (Intel i1480 for example) allows - * up to 22 devices to connect. Upcoming hardware might raise that - * limit. Because the arrays need to add a bit for hub status data, we - * do 31, so plus one evens out to four bytes. - */ -#define USB_MAXCHILDREN (31) +/* ----------------------------------------------------------------------- */ struct usb_tt; @@ -420,6 +416,22 @@ }; /* + * USB 2.0 Link Power Management (LPM) parameters. + */ +struct usb2_lpm_parameters { + /* Best effort service latency indicate how long the host will drive + * resume on an exit from L1. + */ + unsigned int besl; + + /* Timeout value in microseconds for the L1 inactivity (LPM) timer. + * When the timer counts to zero, the parent hub will initiate a LPM + * transition to L1. + */ + int timeout; +}; + +/* * USB 3.0 Link Power Management (LPM) parameters. * * PEL and SEL are USB 3.0 Link PM latencies for device-initiated LPM exit. @@ -494,8 +506,12 @@ * @wusb: device is Wireless USB * @lpm_capable: device supports LPM * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM - * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled + * @usb2_hw_lpm_besl_capable: device can perform USB2 hardware BESL LPM + * @usb2_hw_lpm_enabled: USB2 hardware LPM is enabled + * @usb2_hw_lpm_allowed: Userspace allows USB 2.0 LPM to be enabled * @usb3_lpm_enabled: USB3 hardware LPM enabled + * @usb3_lpm_u1_enabled: USB3 hardware U1 LPM enabled + * @usb3_lpm_u2_enabled: USB3 hardware U2 LPM enabled * @string_langid: language ID for strings * @product: iProduct string, if present (static) * @manufacturer: iManufacturer string, if present (static) @@ -513,6 +529,7 @@ * specific data for the device. * @slot_id: Slot ID assigned by xHCI * @removable: Device can be physically removed from this port + * @l1_params: best effor service latency for USB2 L1 LPM state, and L1 timeout. * @u1_params: exit latencies for USB3 U1 LPM state, and hub-initiated timeout. * @u2_params: exit latencies for USB3 U2 LPM state, and hub-initiated timeout. * @lpm_disable_count: Ref count used by usb_disable_lpm() and usb_enable_lpm() @@ -564,8 +581,17 @@ unsigned wusb:1; unsigned lpm_capable:1; unsigned usb2_hw_lpm_capable:1; + unsigned usb2_hw_lpm_besl_capable:1; unsigned usb2_hw_lpm_enabled:1; + unsigned usb2_hw_lpm_allowed:1; unsigned usb3_lpm_enabled:1; + unsigned usb3_lpm_u1_enabled:1; + unsigned usb3_lpm_u2_enabled:1; + +#if 1 /* == 20160222 AVM/VGJ - CHANGESET: noprobe Extension for AURA == */ + unsigned noprobe:1; +#endif + int string_langid; /* static strings from the device */ @@ -592,6 +618,7 @@ struct wusb_dev *wusb_dev; int slot_id; enum usb_device_removable removable; + struct usb2_lpm_parameters l1_params; struct usb3_lpm_parameters u1_params; struct usb3_lpm_parameters u2_params; unsigned lpm_disable_count; @@ -643,7 +670,7 @@ #endif /* USB autosuspend and autoresume */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM extern void usb_enable_autosuspend(struct usb_device *udev); extern void usb_disable_autosuspend(struct usb_device *udev); @@ -701,6 +728,12 @@ return udev->bos->ss_cap->bmAttributes & USB_LTM_SUPPORT; } +static inline bool usb_device_no_sg_constraint(struct usb_device *udev) +{ + return udev && udev->bus && udev->bus->no_sg_constraint; +} + +extern struct usb_device *usb_find_device_by_name(const char *name); /*-------------------------------------------------------------------------*/ @@ -713,7 +746,7 @@ unsigned int num_streams, gfp_t mem_flags); /* Reverts a group of bulk endpoints back to not using stream IDs. */ -extern void usb_free_streams(struct usb_interface *interface, +extern int usb_free_streams(struct usb_interface *interface, struct usb_host_endpoint **eps, unsigned int num_eps, gfp_t mem_flags); @@ -725,7 +758,10 @@ * usb_interface_claimed - returns true iff an interface is claimed * @iface: the interface being checked * - * Returns true (nonzero) iff the interface is claimed, else false (zero). + * Return: %true (nonzero) iff the interface is claimed, else %false + * (zero). + * + * Note: * Callers must own the driver model's usb bus readlock. So driver * probe() entries don't need extra locking, but other call contexts * may need to explicitly claim that lock. @@ -743,6 +779,7 @@ extern int usb_match_one_id(struct usb_interface *interface, const struct usb_device_id *id); +extern int usb_for_each_dev(void *data, int (*fn)(struct usb_device *, void *)); extern struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor); extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev, @@ -754,6 +791,11 @@ unsigned int iface_num, unsigned int alt_num); +/* port claiming functions */ +int usb_hub_claim_port(struct usb_device *hdev, unsigned port1, + struct usb_dev_state *owner); +int usb_hub_release_port(struct usb_device *hdev, unsigned port1, + struct usb_dev_state *owner); /** * usb_make_path - returns stable device path in the usb tree @@ -761,8 +803,9 @@ * @buf: where to put the string * @size: how big is "buf"? * - * Returns length of the string (> 0) or negative if size was too small. + * Return: Length of the string (> 0) or negative if size was too small. * + * Note: * This identifier is intended to be "stable", reflecting physical paths in * hardware such as physical bus addresses for host controllers or ports on * USB hubs. That makes it stay the same until systems are physically @@ -969,6 +1012,7 @@ }; extern ssize_t usb_store_new_id(struct usb_dynids *dynids, + const struct usb_device_id *id_table, struct device_driver *driver, const char *buf, size_t count); @@ -1029,7 +1073,7 @@ * for interfaces bound to this driver. * @soft_unbind: if set to 1, the USB core will not kill URBs and disable * endpoints before calling the driver's disconnect method. - * @disable_hub_initiated_lpm: if set to 0, the USB core will not allow hubs + * @disable_hub_initiated_lpm: if set to 1, the USB core will not allow hubs * to initiate lower power link state transitions when an idle timeout * occurs. Device-initiated USB 3.0 link PM will still be allowed. * @@ -1215,11 +1259,13 @@ struct list_head urb_list; wait_queue_head_t wait; spinlock_t lock; + atomic_t suspend_wakeups; unsigned int poisoned:1; }; static inline void init_usb_anchor(struct usb_anchor *anchor) { + memset(anchor, 0, sizeof(*anchor)); INIT_LIST_HEAD(&anchor->urb_list); init_waitqueue_head(&anchor->wait); spin_lock_init(&anchor->lock); @@ -1263,7 +1309,9 @@ * the device driver is saying that it provided this DMA address, * which the host controller driver should use in preference to the * transfer_buffer. - * @sg: scatter gather buffer list + * @sg: scatter gather buffer list, the buffer size of each element in + * the list (except the last) must be divisible by the endpoint's + * max packet size if no_sg_constraint isn't set in 'struct usb_bus' * @num_mapped_sgs: (internal) number of mapped sg entries * @num_sgs: number of entries in the sg list * @transfer_buffer_length: How big is transfer_buffer. The transfer may @@ -1550,10 +1598,16 @@ urb->transfer_buffer_length = buffer_length; urb->complete = complete_fn; urb->context = context; - if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) + + if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) { + /* make sure interval is within allowed range */ + interval = clamp(interval, 1, 16); + urb->interval = 1 << (interval - 1); - else + } else { urb->interval = interval; + } + urb->start_frame = -1; } @@ -1572,6 +1626,8 @@ extern void usb_poison_anchored_urbs(struct usb_anchor *anchor); extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor); extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor); +extern void usb_anchor_suspend_wakeups(struct usb_anchor *anchor); +extern void usb_anchor_resume_wakeups(struct usb_anchor *anchor); extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor); extern void usb_unanchor_urb(struct urb *urb); extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor, @@ -1586,7 +1642,7 @@ * usb_urb_dir_in - check if an URB describes an IN transfer * @urb: URB to be checked * - * Returns 1 if @urb describes an IN transfer (device-to-host), + * Return: 1 if @urb describes an IN transfer (device-to-host), * otherwise 0. */ static inline int usb_urb_dir_in(struct urb *urb) @@ -1598,7 +1654,7 @@ * usb_urb_dir_out - check if an URB describes an OUT transfer * @urb: URB to be checked * - * Returns 1 if @urb describes an OUT transfer (host-to-device), + * Return: 1 if @urb describes an OUT transfer (host-to-device), * otherwise 0. */ static inline int usb_urb_dir_out(struct urb *urb) @@ -1657,6 +1713,10 @@ /* this request isn't really synchronous, but it belongs with the others */ extern int usb_driver_set_configuration(struct usb_device *udev, int config); +/* choose and set configuration for device */ +extern int usb_choose_configuration(struct usb_device *udev); +extern int usb_set_configuration(struct usb_device *dev, int configuration); + /* * timeouts, in milliseconds, used for sending/receiving control messages * they typically complete within a few frames (msec) after they're issued @@ -1836,6 +1896,18 @@ /* debugfs stuff */ extern struct dentry *usb_debug_root; +/* LED triggers */ +enum usb_led_event { + USB_LED_EVENT_HOST = 0, + USB_LED_EVENT_GADGET = 1, +}; + +#ifdef CONFIG_USB_LED_TRIG +extern void usb_led_activity(enum usb_led_event ev); +#else +static inline void usb_led_activity(enum usb_led_event ev) {} +#endif + #endif /* __KERNEL__ */ #endif