--- zzzz-none-000/linux-3.10.107/include/media/saa7115.h	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/include/media/saa7115.h	2021-02-04 17:41:59.000000000 +0000
@@ -47,9 +47,11 @@
 #define SAA7111_FMT_YUV411 	0xc0
 
 /* config flags */
-/* Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit
+/*
+ * Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit
  * controls the IDQ signal polarity which is set to 'inverted' if the bit
- * it 1 and to 'default' if it is 0. */
+ * it 1 and to 'default' if it is 0.
+ */
 #define SAA7115_IDQ_IS_DEFAULT  (1 << 0)
 
 /* s_crystal_freq values and flags */
@@ -64,5 +66,76 @@
 #define SAA7115_FREQ_FL_APLL         (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */
 #define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */
 
+/* ===== SAA7113 Config enums ===== */
+
+/* Register 0x08 "Horizontal time constant" [Bit 3..4]:
+ * Should be set to "Fast Locking Mode" according to the datasheet,
+ * and that is the default setting in the gm7113c_init table.
+ * saa7113_init sets this value to "VTR Mode". */
+enum saa7113_r08_htc {
+	SAA7113_HTC_TV_MODE = 0x00,
+	SAA7113_HTC_VTR_MODE,			/* Default for saa7113_init */
+	SAA7113_HTC_FAST_LOCKING_MODE = 0x03	/* Default for gm7113c_init */
+};
+
+/* Register 0x10 "Output format selection" [Bit 6..7]:
+ * Defaults to ITU_656 as specified in datasheet. */
+enum saa7113_r10_ofts {
+	SAA7113_OFTS_ITU_656 = 0x0,	/* Default */
+	SAA7113_OFTS_VFLAG_BY_VREF,
+	SAA7113_OFTS_VFLAG_BY_DATA_TYPE
+};
+
+/*
+ * Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]:
+ * This is used to select what data is output on the RTS0 and RTS1 pins.
+ * RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0)
+ * RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified
+ * in the datasheet, but is set to HREF_HS in the saa7113_init table.
+ */
+enum saa7113_r12_rts {
+	SAA7113_RTS_DOT_IN = 0,		/* OBS: Only for RTS1 (Default RTS1) */
+	SAA7113_RTS_VIPB,		/* Default RTS0 For gm7113c_init */
+	SAA7113_RTS_GPSW,
+	SAA7115_RTS_HL,
+	SAA7113_RTS_VL,
+	SAA7113_RTS_DL,
+	SAA7113_RTS_PLIN,
+	SAA7113_RTS_HREF_HS,		/* Default RTS0 For saa7113_init */
+	SAA7113_RTS_HS,
+	SAA7113_RTS_HQ,
+	SAA7113_RTS_ODD,
+	SAA7113_RTS_VS,
+	SAA7113_RTS_V123,
+	SAA7113_RTS_VGATE,
+	SAA7113_RTS_VREF,
+	SAA7113_RTS_FID
+};
+
+/**
+ * struct saa7115_platform_data - Allow overriding default initialization
+ *
+ * @saa7113_force_gm7113c_init:	Force the use of the gm7113c_init table
+ *				instead of saa7113_init table
+ *				(saa7113 only)
+ * @saa7113_r08_htc:		[R_08 - Bit 3..4]
+ * @saa7113_r10_vrln:		[R_10 - Bit 3]
+ *				default: Disabled for gm7113c_init
+ *					 Enabled for saa7113c_init
+ * @saa7113_r10_ofts:		[R_10 - Bit 6..7]
+ * @saa7113_r12_rts0:		[R_12 - Bit 0..3]
+ * @saa7113_r12_rts1:		[R_12 - Bit 4..7]
+ * @saa7113_r13_adlsb:		[R_13 - Bit 7] - default: disabled
+ */
+struct saa7115_platform_data {
+	bool saa7113_force_gm7113c_init;
+	enum saa7113_r08_htc *saa7113_r08_htc;
+	bool *saa7113_r10_vrln;
+	enum saa7113_r10_ofts *saa7113_r10_ofts;
+	enum saa7113_r12_rts *saa7113_r12_rts0;
+	enum saa7113_r12_rts *saa7113_r12_rts1;
+	bool *saa7113_r13_adlsb;
+};
+
 #endif