--- zzzz-none-000/linux-3.10.107/include/uapi/linux/virtio_blk.h	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/include/uapi/linux/virtio_blk.h	2021-02-04 17:41:59.000000000 +0000
@@ -28,23 +28,28 @@
 #include <linux/types.h>
 #include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
+#include <linux/virtio_types.h>
 
 /* Feature bits */
-#define VIRTIO_BLK_F_BARRIER	0	/* Does host support barriers? */
 #define VIRTIO_BLK_F_SIZE_MAX	1	/* Indicates maximum segment size */
 #define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
 #define VIRTIO_BLK_F_GEOMETRY	4	/* Legacy geometry available  */
 #define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
 #define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
+#define VIRTIO_BLK_F_TOPOLOGY	10	/* Topology information is available */
+#define VIRTIO_BLK_F_MQ		12	/* support more than one vq */
+
+/* Legacy feature bits */
+#ifndef VIRTIO_BLK_NO_LEGACY
+#define VIRTIO_BLK_F_BARRIER	0	/* Does host support barriers? */
 #define VIRTIO_BLK_F_SCSI	7	/* Supports scsi command passthru */
 #define VIRTIO_BLK_F_WCE	9	/* Writeback mode enabled after reset */
-#define VIRTIO_BLK_F_TOPOLOGY	10	/* Topology information is available */
 #define VIRTIO_BLK_F_CONFIG_WCE	11	/* Writeback mode available in config */
-
 #ifndef __KERNEL__
 /* Old (deprecated) name for VIRTIO_BLK_F_WCE. */
 #define VIRTIO_BLK_F_FLUSH VIRTIO_BLK_F_WCE
 #endif
+#endif /* !VIRTIO_BLK_NO_LEGACY */
 
 #define VIRTIO_BLK_ID_BYTES	20	/* ID string length */
 
@@ -55,7 +60,7 @@
 	__u32 size_max;
 	/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
 	__u32 seg_max;
-	/* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
+	/* geometry of the device (if VIRTIO_BLK_F_GEOMETRY) */
 	struct virtio_blk_geometry {
 		__u16 cylinders;
 		__u8 heads;
@@ -77,6 +82,10 @@
 
 	/* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */
 	__u8 wce;
+	__u8 unused;
+
+	/* number of vqs, only available when VIRTIO_BLK_F_MQ is set */
+	__u16 num_queues;
 } __attribute__((packed));
 
 /*
@@ -94,8 +103,10 @@
 #define VIRTIO_BLK_T_IN		0
 #define VIRTIO_BLK_T_OUT	1
 
+#ifndef VIRTIO_BLK_NO_LEGACY
 /* This bit says it's a scsi command, not an actual read or write. */
 #define VIRTIO_BLK_T_SCSI_CMD	2
+#endif /* VIRTIO_BLK_NO_LEGACY */
 
 /* Cache flush command */
 #define VIRTIO_BLK_T_FLUSH	4
@@ -103,25 +114,33 @@
 /* Get device ID command */
 #define VIRTIO_BLK_T_GET_ID    8
 
+#ifndef VIRTIO_BLK_NO_LEGACY
 /* Barrier before this op. */
 #define VIRTIO_BLK_T_BARRIER	0x80000000
+#endif /* !VIRTIO_BLK_NO_LEGACY */
 
-/* This is the first element of the read scatter-gather list. */
+/*
+ * This comes first in the read scatter-gather list.
+ * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated,
+ * this is the first element of the read scatter-gather list.
+ */
 struct virtio_blk_outhdr {
 	/* VIRTIO_BLK_T* */
-	__u32 type;
+	__virtio32 type;
 	/* io priority. */
-	__u32 ioprio;
+	__virtio32 ioprio;
 	/* Sector (ie. 512 byte offset) */
-	__u64 sector;
+	__virtio64 sector;
 };
 
+#ifndef VIRTIO_BLK_NO_LEGACY
 struct virtio_scsi_inhdr {
-	__u32 errors;
-	__u32 data_len;
-	__u32 sense_len;
-	__u32 residual;
+	__virtio32 errors;
+	__virtio32 data_len;
+	__virtio32 sense_len;
+	__virtio32 residual;
 };
+#endif /* !VIRTIO_BLK_NO_LEGACY */
 
 /* And this is the final byte of the write scatter-gather list. */
 #define VIRTIO_BLK_S_OK		0