--- zzzz-none-000/linux-3.10.107/kernel/debug/debug_core.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/kernel/debug/debug_core.c 2021-02-04 17:41:59.000000000 +0000 @@ -27,6 +27,9 @@ * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ + +#define pr_fmt(fmt) "KGDB: " fmt + #include #include #include @@ -49,6 +52,7 @@ #include #include #include +#include #include #include @@ -195,8 +199,8 @@ return err; err = kgdb_arch_remove_breakpoint(&tmp); if (err) - printk(KERN_ERR "KGDB: Critical breakpoint error, kernel " - "memory destroyed at: %lx", addr); + pr_err("Critical breakpoint error, kernel memory destroyed at: %lx\n", + addr); return err; } @@ -224,10 +228,17 @@ if (!CACHE_FLUSH_IS_SAFE) return; - if (current->mm && current->mm->mmap_cache) { - flush_cache_range(current->mm->mmap_cache, - addr, addr + BREAK_INSTR_SIZE); + if (current->mm) { + int i; + + for (i = 0; i < VMACACHE_SIZE; i++) { + if (!current->vmacache[i]) + continue; + flush_cache_range(current->vmacache[i], + addr, addr + BREAK_INSTR_SIZE); + } } + /* Force flush instruction cache if it was outside the mm */ flush_icache_range(addr, addr + BREAK_INSTR_SIZE); } @@ -248,8 +259,8 @@ error = kgdb_arch_set_breakpoint(&kgdb_break[i]); if (error) { ret = error; - printk(KERN_INFO "KGDB: BP install failed: %lx", - kgdb_break[i].bpt_addr); + pr_info("BP install failed: %lx\n", + kgdb_break[i].bpt_addr); continue; } @@ -311,8 +322,8 @@ continue; error = kgdb_arch_remove_breakpoint(&kgdb_break[i]); if (error) { - printk(KERN_INFO "KGDB: BP remove failed: %lx\n", - kgdb_break[i].bpt_addr); + pr_info("BP remove failed: %lx\n", + kgdb_break[i].bpt_addr); ret = error; } @@ -359,7 +370,7 @@ goto setundefined; error = kgdb_arch_remove_breakpoint(&kgdb_break[i]); if (error) - printk(KERN_ERR "KGDB: breakpoint remove failed: %lx\n", + pr_err("breakpoint remove failed: %lx\n", kgdb_break[i].bpt_addr); setundefined: kgdb_break[i].state = BP_UNDEFINED; @@ -392,9 +403,9 @@ if (print_wait) { #ifdef CONFIG_KGDB_KDB if (!dbg_kdb_mode) - printk(KERN_CRIT "KGDB: waiting... or $3#33 for KDB\n"); + pr_crit("waiting... or $3#33 for KDB\n"); #else - printk(KERN_CRIT "KGDB: Waiting for remote debugger\n"); + pr_crit("Waiting for remote debugger\n"); #endif } return 1; @@ -422,8 +433,7 @@ exception_level = 0; kgdb_skipexception(ks->ex_vector, ks->linux_regs); dbg_activate_sw_breakpoints(); - printk(KERN_CRIT "KGDB: re-enter error: breakpoint removed %lx\n", - addr); + pr_crit("re-enter error: breakpoint removed %lx\n", addr); WARN_ON_ONCE(1); return 1; @@ -436,7 +446,7 @@ panic("Recursive entry to debugger"); } - printk(KERN_CRIT "KGDB: re-enter exception: ALL breakpoints killed\n"); + pr_crit("re-enter exception: ALL breakpoints killed\n"); #ifdef CONFIG_KGDB_KDB /* Allow kdb to debug itself one level */ return 0; @@ -463,6 +473,7 @@ int cpu; int trace_on = 0; int online_cpus = num_online_cpus(); + u64 time_left; kgdb_info[ks->cpu].enter_kgdb++; kgdb_info[ks->cpu].exception_state |= exception_state; @@ -526,7 +537,7 @@ kgdb_info[cpu].exception_state &= ~(DCPU_WANT_MASTER | DCPU_IS_SLAVE); kgdb_info[cpu].enter_kgdb--; - smp_mb__before_atomic_dec(); + smp_mb__before_atomic(); atomic_dec(&slaves_in_kgdb); dbg_touch_watchdogs(); local_irq_restore(flags); @@ -575,17 +586,25 @@ raw_spin_lock(&dbg_slave_lock); #ifdef CONFIG_SMP + /* If send_ready set, slaves are already waiting */ + if (ks->send_ready) + atomic_set(ks->send_ready, 1); + /* Signal the other CPUs to enter kgdb_wait() */ - if ((!kgdb_single_step) && kgdb_do_roundup) + else if ((!kgdb_single_step) && kgdb_do_roundup) kgdb_roundup_cpus(flags); #endif /* * Wait for the other CPUs to be notified and be waiting for us: */ - while (kgdb_do_roundup && (atomic_read(&masters_in_kgdb) + - atomic_read(&slaves_in_kgdb)) != online_cpus) - cpu_relax(); + time_left = MSEC_PER_SEC; + while (kgdb_do_roundup && --time_left && + (atomic_read(&masters_in_kgdb) + atomic_read(&slaves_in_kgdb)) != + online_cpus) + udelay(1000); + if (!time_left) + pr_crit("Timed out waiting for secondary CPUs.\n"); /* * At this point the primary processor is completely @@ -650,7 +669,7 @@ kgdb_info[cpu].exception_state &= ~(DCPU_WANT_MASTER | DCPU_IS_SLAVE); kgdb_info[cpu].enter_kgdb--; - smp_mb__before_atomic_dec(); + smp_mb__before_atomic(); atomic_dec(&masters_in_kgdb); /* Free kgdb_active */ atomic_set(&kgdb_active, -1); @@ -677,12 +696,20 @@ if (arch_kgdb_ops.enable_nmi) arch_kgdb_ops.enable_nmi(0); + /* + * Avoid entering the debugger if we were triggered due to an oops + * but panic_timeout indicates the system should automatically + * reboot on panic. We don't want to get stuck waiting for input + * on such systems, especially if its "just" an oops. + */ + if (signo != SIGTRAP && panic_timeout) + return 1; + memset(ks, 0, sizeof(struct kgdb_state)); ks->cpu = raw_smp_processor_id(); ks->ex_vector = evector; ks->signo = signo; ks->err_code = ecode; - ks->kgdb_usethreadid = 0; ks->linux_regs = regs; if (kgdb_reenter_check(ks)) @@ -732,6 +759,31 @@ return 1; } +int kgdb_nmicallin(int cpu, int trapnr, void *regs, int err_code, + atomic_t *send_ready) +{ +#ifdef CONFIG_SMP + if (!kgdb_io_ready(0) || !send_ready) + return 1; + + if (kgdb_info[cpu].enter_kgdb == 0) { + struct kgdb_state kgdb_var; + struct kgdb_state *ks = &kgdb_var; + + memset(ks, 0, sizeof(struct kgdb_state)); + ks->cpu = cpu; + ks->ex_vector = trapnr; + ks->signo = SIGTRAP; + ks->err_code = err_code; + ks->linux_regs = regs; + ks->send_ready = send_ready; + kgdb_cpu_enter(ks, regs, DCPU_WANT_MASTER); + return 0; + } +#endif + return 1; +} + static void kgdb_console_write(struct console *co, const char *s, unsigned count) { @@ -758,15 +810,15 @@ static void sysrq_handle_dbg(int key) { if (!dbg_io_ops) { - printk(KERN_CRIT "ERROR: No KGDB I/O module available\n"); + pr_crit("ERROR: No KGDB I/O module available\n"); return; } if (!kgdb_connected) { #ifdef CONFIG_KGDB_KDB if (!dbg_kdb_mode) - printk(KERN_CRIT "KGDB or $3#33 for KDB\n"); + pr_crit("KGDB or $3#33 for KDB\n"); #else - printk(KERN_CRIT "Entering KGDB\n"); + pr_crit("Entering KGDB\n"); #endif } @@ -784,6 +836,15 @@ unsigned long val, void *data) { + /* + * Avoid entering the debugger if we were triggered due to a panic + * We don't want to get stuck waiting for input from user in such case. + * panic_timeout indicates the system should automatically + * reboot on panic. + */ + if (panic_timeout) + return NOTIFY_DONE; + if (dbg_kdb_mode) kdb_printf("PANIC: %s\n", (char *)data); kgdb_breakpoint(); @@ -908,7 +969,7 @@ { kgdb_break_asap = 0; - printk(KERN_CRIT "kgdb: Waiting for connection from remote gdb...\n"); + pr_crit("Waiting for connection from remote gdb...\n"); kgdb_breakpoint(); } @@ -927,8 +988,7 @@ if (dbg_io_ops) { spin_unlock(&kgdb_registration_lock); - printk(KERN_ERR "kgdb: Another I/O driver is already " - "registered with KGDB.\n"); + pr_err("Another I/O driver is already registered with KGDB\n"); return -EBUSY; } @@ -944,8 +1004,7 @@ spin_unlock(&kgdb_registration_lock); - printk(KERN_INFO "kgdb: Registered I/O driver %s.\n", - new_dbg_io_ops->name); + pr_info("Registered I/O driver %s\n", new_dbg_io_ops->name); /* Arm KGDB now. */ kgdb_register_callbacks(); @@ -980,8 +1039,7 @@ spin_unlock(&kgdb_registration_lock); - printk(KERN_INFO - "kgdb: Unregistered I/O driver %s, debugger disabled.\n", + pr_info("Unregistered I/O driver %s, debugger disabled\n", old_dbg_io_ops->name); } EXPORT_SYMBOL_GPL(kgdb_unregister_io_module); @@ -1006,7 +1064,7 @@ * otherwise as a quick means to stop program execution and "break" into * the debugger. */ -void kgdb_breakpoint(void) +noinline void kgdb_breakpoint(void) { atomic_inc(&kgdb_setting_breakpoint); wmb(); /* Sync point before breakpoint */