--- zzzz-none-000/linux-3.10.107/net/batman-adv/sysfs.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/net/batman-adv/sysfs.c 2021-02-04 17:41:59.000000000 +0000 @@ -1,4 +1,4 @@ -/* Copyright (C) 2010-2013 B.A.T.M.A.N. contributors: +/* Copyright (C) 2010-2015 B.A.T.M.A.N. contributors: * * Marek Lindner * @@ -12,33 +12,100 @@ * General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA + * along with this program; if not, see . */ -#include "main.h" #include "sysfs.h" -#include "translation-table.h" +#include "main.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + #include "distributed-arp-table.h" -#include "originator.h" -#include "hard-interface.h" -#include "gateway_common.h" #include "gateway_client.h" -#include "vis.h" +#include "gateway_common.h" +#include "hard-interface.h" +#include "network-coding.h" +#include "packet.h" +#include "soft-interface.h" static struct net_device *batadv_kobj_to_netdev(struct kobject *obj) { struct device *dev = container_of(obj->parent, struct device, kobj); + return to_net_dev(dev); } static struct batadv_priv *batadv_kobj_to_batpriv(struct kobject *obj) { struct net_device *net_dev = batadv_kobj_to_netdev(obj); + return netdev_priv(net_dev); } +/** + * batadv_vlan_kobj_to_batpriv - convert a vlan kobj in the associated batpriv + * @obj: kobject to covert + * + * Returns the associated batadv_priv struct. + */ +static struct batadv_priv *batadv_vlan_kobj_to_batpriv(struct kobject *obj) +{ + /* VLAN specific attributes are located in the root sysfs folder if they + * refer to the untagged VLAN.. + */ + if (!strcmp(BATADV_SYSFS_IF_MESH_SUBDIR, obj->name)) + return batadv_kobj_to_batpriv(obj); + + /* ..while the attributes for the tagged vlans are located in + * the in the corresponding "vlan%VID" subfolder + */ + return batadv_kobj_to_batpriv(obj->parent); +} + +/** + * batadv_kobj_to_vlan - convert a kobj in the associated softif_vlan struct + * @obj: kobject to covert + * + * Returns the associated softif_vlan struct if found, NULL otherwise. + */ +static struct batadv_softif_vlan * +batadv_kobj_to_vlan(struct batadv_priv *bat_priv, struct kobject *obj) +{ + struct batadv_softif_vlan *vlan_tmp, *vlan = NULL; + + rcu_read_lock(); + hlist_for_each_entry_rcu(vlan_tmp, &bat_priv->softif_vlan_list, list) { + if (vlan_tmp->kobj != obj) + continue; + + if (!atomic_inc_not_zero(&vlan_tmp->refcount)) + continue; + + vlan = vlan_tmp; + break; + } + rcu_read_unlock(); + + return vlan; +} + #define BATADV_UEV_TYPE_VAR "BATTYPE=" #define BATADV_UEV_ACTION_VAR "BATACTION=" #define BATADV_UEV_DATA_VAR "BATDATA=" @@ -53,6 +120,15 @@ "gw" }; +/* Use this, if you have customized show and store functions for vlan attrs */ +#define BATADV_ATTR_VLAN(_name, _mode, _show, _store) \ +struct batadv_attribute batadv_attr_vlan_##_name = { \ + .attr = {.name = __stringify(_name), \ + .mode = _mode }, \ + .show = _show, \ + .store = _store, \ +} + /* Use this, if you have customized show and store functions */ #define BATADV_ATTR(_name, _mode, _show, _store) \ struct batadv_attribute batadv_attr_##_name = { \ @@ -60,7 +136,7 @@ .mode = _mode }, \ .show = _show, \ .store = _store, \ -}; +} #define BATADV_ATTR_SIF_STORE_BOOL(_name, _post_func) \ ssize_t batadv_store_##_name(struct kobject *kobj, \ @@ -69,6 +145,7 @@ { \ struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \ struct batadv_priv *bat_priv = netdev_priv(net_dev); \ + \ return __batadv_store_bool_attr(buff, count, _post_func, attr, \ &bat_priv->_name, net_dev); \ } @@ -78,6 +155,7 @@ struct attribute *attr, char *buff) \ { \ struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); \ + \ return sprintf(buff, "%s\n", \ atomic_read(&bat_priv->_name) == 0 ? \ "disabled" : "enabled"); \ @@ -92,36 +170,74 @@ static BATADV_ATTR(_name, _mode, batadv_show_##_name, \ batadv_store_##_name) - -#define BATADV_ATTR_SIF_STORE_UINT(_name, _min, _max, _post_func) \ +#define BATADV_ATTR_SIF_STORE_UINT(_name, _var, _min, _max, _post_func) \ ssize_t batadv_store_##_name(struct kobject *kobj, \ struct attribute *attr, char *buff, \ size_t count) \ { \ struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \ struct batadv_priv *bat_priv = netdev_priv(net_dev); \ + \ return __batadv_store_uint_attr(buff, count, _min, _max, \ _post_func, attr, \ - &bat_priv->_name, net_dev); \ + &bat_priv->_var, net_dev); \ } -#define BATADV_ATTR_SIF_SHOW_UINT(_name) \ +#define BATADV_ATTR_SIF_SHOW_UINT(_name, _var) \ ssize_t batadv_show_##_name(struct kobject *kobj, \ struct attribute *attr, char *buff) \ { \ struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); \ - return sprintf(buff, "%i\n", atomic_read(&bat_priv->_name)); \ + \ + return sprintf(buff, "%i\n", atomic_read(&bat_priv->_var)); \ } \ /* Use this, if you are going to set [name] in the soft-interface * (bat_priv) to an unsigned integer value */ -#define BATADV_ATTR_SIF_UINT(_name, _mode, _min, _max, _post_func) \ - static BATADV_ATTR_SIF_STORE_UINT(_name, _min, _max, _post_func)\ - static BATADV_ATTR_SIF_SHOW_UINT(_name) \ +#define BATADV_ATTR_SIF_UINT(_name, _var, _mode, _min, _max, _post_func)\ + static BATADV_ATTR_SIF_STORE_UINT(_name, _var, _min, _max, _post_func)\ + static BATADV_ATTR_SIF_SHOW_UINT(_name, _var) \ static BATADV_ATTR(_name, _mode, batadv_show_##_name, \ batadv_store_##_name) +#define BATADV_ATTR_VLAN_STORE_BOOL(_name, _post_func) \ +ssize_t batadv_store_vlan_##_name(struct kobject *kobj, \ + struct attribute *attr, char *buff, \ + size_t count) \ +{ \ + struct batadv_priv *bat_priv = batadv_vlan_kobj_to_batpriv(kobj);\ + struct batadv_softif_vlan *vlan = batadv_kobj_to_vlan(bat_priv, \ + kobj); \ + size_t res = __batadv_store_bool_attr(buff, count, _post_func, \ + attr, &vlan->_name, \ + bat_priv->soft_iface); \ + \ + batadv_softif_vlan_free_ref(vlan); \ + return res; \ +} + +#define BATADV_ATTR_VLAN_SHOW_BOOL(_name) \ +ssize_t batadv_show_vlan_##_name(struct kobject *kobj, \ + struct attribute *attr, char *buff) \ +{ \ + struct batadv_priv *bat_priv = batadv_vlan_kobj_to_batpriv(kobj);\ + struct batadv_softif_vlan *vlan = batadv_kobj_to_vlan(bat_priv, \ + kobj); \ + size_t res = sprintf(buff, "%s\n", \ + atomic_read(&vlan->_name) == 0 ? \ + "disabled" : "enabled"); \ + \ + batadv_softif_vlan_free_ref(vlan); \ + return res; \ +} + +/* Use this, if you are going to turn a [name] in the vlan struct on or off */ +#define BATADV_ATTR_VLAN_BOOL(_name, _mode, _post_func) \ + static BATADV_ATTR_VLAN_STORE_BOOL(_name, _post_func) \ + static BATADV_ATTR_VLAN_SHOW_BOOL(_name) \ + static BATADV_ATTR_VLAN(_name, _mode, batadv_show_vlan_##_name, \ + batadv_store_vlan_##_name) static int batadv_store_bool_attr(char *buff, size_t count, struct net_device *net_dev, @@ -230,85 +346,19 @@ return ret; } -static ssize_t batadv_show_vis_mode(struct kobject *kobj, - struct attribute *attr, char *buff) -{ - struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); - int vis_mode = atomic_read(&bat_priv->vis_mode); - const char *mode; - - if (vis_mode == BATADV_VIS_TYPE_CLIENT_UPDATE) - mode = "client"; - else - mode = "server"; - - return sprintf(buff, "%s\n", mode); -} - -static ssize_t batadv_store_vis_mode(struct kobject *kobj, - struct attribute *attr, char *buff, - size_t count) -{ - struct net_device *net_dev = batadv_kobj_to_netdev(kobj); - struct batadv_priv *bat_priv = netdev_priv(net_dev); - unsigned long val; - int ret, vis_mode_tmp = -1; - const char *old_mode, *new_mode; - - ret = kstrtoul(buff, 10, &val); - - if (((count == 2) && (!ret) && - (val == BATADV_VIS_TYPE_CLIENT_UPDATE)) || - (strncmp(buff, "client", 6) == 0) || - (strncmp(buff, "off", 3) == 0)) - vis_mode_tmp = BATADV_VIS_TYPE_CLIENT_UPDATE; - - if (((count == 2) && (!ret) && - (val == BATADV_VIS_TYPE_SERVER_SYNC)) || - (strncmp(buff, "server", 6) == 0)) - vis_mode_tmp = BATADV_VIS_TYPE_SERVER_SYNC; - - if (vis_mode_tmp < 0) { - if (buff[count - 1] == '\n') - buff[count - 1] = '\0'; - - batadv_info(net_dev, - "Invalid parameter for 'vis mode' setting received: %s\n", - buff); - return -EINVAL; - } - - if (atomic_read(&bat_priv->vis_mode) == vis_mode_tmp) - return count; - - if (atomic_read(&bat_priv->vis_mode) == BATADV_VIS_TYPE_CLIENT_UPDATE) - old_mode = "client"; - else - old_mode = "server"; - - if (vis_mode_tmp == BATADV_VIS_TYPE_CLIENT_UPDATE) - new_mode = "client"; - else - new_mode = "server"; - - batadv_info(net_dev, "Changing vis mode from: %s to: %s\n", old_mode, - new_mode); - - atomic_set(&bat_priv->vis_mode, (unsigned int)vis_mode_tmp); - return count; -} - static ssize_t batadv_show_bat_algo(struct kobject *kobj, struct attribute *attr, char *buff) { struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); + return sprintf(buff, "%s\n", bat_priv->bat_algo_ops->name); } -static void batadv_post_gw_deselect(struct net_device *net_dev) +static void batadv_post_gw_reselect(struct net_device *net_dev) { struct batadv_priv *bat_priv = netdev_priv(net_dev); - batadv_gw_deselect(bat_priv); + + batadv_gw_reselect(bat_priv); } static ssize_t batadv_show_gw_mode(struct kobject *kobj, struct attribute *attr, @@ -384,8 +434,22 @@ batadv_info(net_dev, "Changing gw mode from: %s to: %s\n", curr_gw_mode_str, buff); - batadv_gw_deselect(bat_priv); + /* Invoking batadv_gw_reselect() is not enough to really de-select the + * current GW. It will only instruct the gateway client code to perform + * a re-election the next time that this is needed. + * + * When gw client mode is being switched off the current GW must be + * de-selected explicitly otherwise no GW_ADD uevent is thrown on + * client mode re-activation. This is operation is performed in + * batadv_gw_check_client_stop(). + */ + batadv_gw_reselect(bat_priv); + /* always call batadv_gw_check_client_stop() before changing the gateway + * state + */ + batadv_gw_check_client_stop(bat_priv); atomic_set(&bat_priv->gw_mode, (unsigned int)gw_mode_tmp); + batadv_gw_tvlv_container_update(bat_priv); return count; } @@ -393,15 +457,13 @@ struct attribute *attr, char *buff) { struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); - int down, up; - int gw_bandwidth = atomic_read(&bat_priv->gw_bandwidth); + u32 down, up; - batadv_gw_bandwidth_to_kbit(gw_bandwidth, &down, &up); - return sprintf(buff, "%i%s/%i%s\n", - (down > 2048 ? down / 1024 : down), - (down > 2048 ? "MBit" : "KBit"), - (up > 2048 ? up / 1024 : up), - (up > 2048 ? "MBit" : "KBit")); + down = atomic_read(&bat_priv->gw.bandwidth_down); + up = atomic_read(&bat_priv->gw.bandwidth_up); + + return sprintf(buff, "%u.%u/%u.%u MBit\n", down / 10, + down % 10, up / 10, up % 10); } static ssize_t batadv_store_gw_bwidth(struct kobject *kobj, @@ -416,35 +478,108 @@ return batadv_gw_bandwidth_set(net_dev, buff, count); } +/** + * batadv_show_isolation_mark - print the current isolation mark/mask + * @kobj: kobject representing the private mesh sysfs directory + * @attr: the batman-adv attribute the user is interacting with + * @buff: the buffer that will contain the data to send back to the user + * + * Returns the number of bytes written into 'buff' on success or a negative + * error code in case of failure + */ +static ssize_t batadv_show_isolation_mark(struct kobject *kobj, + struct attribute *attr, char *buff) +{ + struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); + + return sprintf(buff, "%#.8x/%#.8x\n", bat_priv->isolation_mark, + bat_priv->isolation_mark_mask); +} + +/** + * batadv_store_isolation_mark - parse and store the isolation mark/mask entered + * by the user + * @kobj: kobject representing the private mesh sysfs directory + * @attr: the batman-adv attribute the user is interacting with + * @buff: the buffer containing the user data + * @count: number of bytes in the buffer + * + * Returns 'count' on success or a negative error code in case of failure + */ +static ssize_t batadv_store_isolation_mark(struct kobject *kobj, + struct attribute *attr, char *buff, + size_t count) +{ + struct net_device *net_dev = batadv_kobj_to_netdev(kobj); + struct batadv_priv *bat_priv = netdev_priv(net_dev); + u32 mark, mask; + char *mask_ptr; + + /* parse the mask if it has been specified, otherwise assume the mask is + * the biggest possible + */ + mask = 0xFFFFFFFF; + mask_ptr = strchr(buff, '/'); + if (mask_ptr) { + *mask_ptr = '\0'; + mask_ptr++; + + /* the mask must be entered in hex base as it is going to be a + * bitmask and not a prefix length + */ + if (kstrtou32(mask_ptr, 16, &mask) < 0) + return -EINVAL; + } + + /* the mark can be entered in any base */ + if (kstrtou32(buff, 0, &mark) < 0) + return -EINVAL; + + bat_priv->isolation_mark_mask = mask; + /* erase bits not covered by the mask */ + bat_priv->isolation_mark = mark & bat_priv->isolation_mark_mask; + + batadv_info(net_dev, + "New skb mark for extended isolation: %#.8x/%#.8x\n", + bat_priv->isolation_mark, bat_priv->isolation_mark_mask); + + return count; +} + BATADV_ATTR_SIF_BOOL(aggregated_ogms, S_IRUGO | S_IWUSR, NULL); BATADV_ATTR_SIF_BOOL(bonding, S_IRUGO | S_IWUSR, NULL); #ifdef CONFIG_BATMAN_ADV_BLA BATADV_ATTR_SIF_BOOL(bridge_loop_avoidance, S_IRUGO | S_IWUSR, NULL); #endif #ifdef CONFIG_BATMAN_ADV_DAT -BATADV_ATTR_SIF_BOOL(distributed_arp_table, S_IRUGO | S_IWUSR, NULL); +BATADV_ATTR_SIF_BOOL(distributed_arp_table, S_IRUGO | S_IWUSR, + batadv_dat_status_update); #endif BATADV_ATTR_SIF_BOOL(fragmentation, S_IRUGO | S_IWUSR, batadv_update_min_mtu); -BATADV_ATTR_SIF_BOOL(ap_isolation, S_IRUGO | S_IWUSR, NULL); -static BATADV_ATTR(vis_mode, S_IRUGO | S_IWUSR, batadv_show_vis_mode, - batadv_store_vis_mode); static BATADV_ATTR(routing_algo, S_IRUGO, batadv_show_bat_algo, NULL); static BATADV_ATTR(gw_mode, S_IRUGO | S_IWUSR, batadv_show_gw_mode, batadv_store_gw_mode); -BATADV_ATTR_SIF_UINT(orig_interval, S_IRUGO | S_IWUSR, 2 * BATADV_JITTER, - INT_MAX, NULL); -BATADV_ATTR_SIF_UINT(hop_penalty, S_IRUGO | S_IWUSR, 0, BATADV_TQ_MAX_VALUE, - NULL); -BATADV_ATTR_SIF_UINT(gw_sel_class, S_IRUGO | S_IWUSR, 1, BATADV_TQ_MAX_VALUE, - batadv_post_gw_deselect); +BATADV_ATTR_SIF_UINT(orig_interval, orig_interval, S_IRUGO | S_IWUSR, + 2 * BATADV_JITTER, INT_MAX, NULL); +BATADV_ATTR_SIF_UINT(hop_penalty, hop_penalty, S_IRUGO | S_IWUSR, 0, + BATADV_TQ_MAX_VALUE, NULL); +BATADV_ATTR_SIF_UINT(gw_sel_class, gw_sel_class, S_IRUGO | S_IWUSR, 1, + BATADV_TQ_MAX_VALUE, batadv_post_gw_reselect); static BATADV_ATTR(gw_bandwidth, S_IRUGO | S_IWUSR, batadv_show_gw_bwidth, batadv_store_gw_bwidth); +#ifdef CONFIG_BATMAN_ADV_MCAST +BATADV_ATTR_SIF_BOOL(multicast_mode, S_IRUGO | S_IWUSR, NULL); +#endif #ifdef CONFIG_BATMAN_ADV_DEBUG -BATADV_ATTR_SIF_UINT(log_level, S_IRUGO | S_IWUSR, 0, BATADV_DBG_ALL, NULL); +BATADV_ATTR_SIF_UINT(log_level, log_level, S_IRUGO | S_IWUSR, 0, + BATADV_DBG_ALL, NULL); #endif #ifdef CONFIG_BATMAN_ADV_NC -BATADV_ATTR_SIF_BOOL(network_coding, S_IRUGO | S_IWUSR, NULL); +BATADV_ATTR_SIF_BOOL(network_coding, S_IRUGO | S_IWUSR, + batadv_nc_status_update); #endif +static BATADV_ATTR(isolation_mark, S_IRUGO | S_IWUSR, + batadv_show_isolation_mark, batadv_store_isolation_mark); static struct batadv_attribute *batadv_mesh_attrs[] = { &batadv_attr_aggregated_ogms, @@ -455,9 +590,10 @@ #ifdef CONFIG_BATMAN_ADV_DAT &batadv_attr_distributed_arp_table, #endif +#ifdef CONFIG_BATMAN_ADV_MCAST + &batadv_attr_multicast_mode, +#endif &batadv_attr_fragmentation, - &batadv_attr_ap_isolation, - &batadv_attr_vis_mode, &batadv_attr_routing_algo, &batadv_attr_gw_mode, &batadv_attr_orig_interval, @@ -470,6 +606,17 @@ #ifdef CONFIG_BATMAN_ADV_NC &batadv_attr_network_coding, #endif + &batadv_attr_isolation_mark, + NULL, +}; + +BATADV_ATTR_VLAN_BOOL(ap_isolation, S_IRUGO | S_IWUSR, NULL); + +/** + * batadv_vlan_attrs - array of vlan specific sysfs attributes + */ +static struct batadv_attribute *batadv_vlan_attrs[] = { + &batadv_attr_vlan_ap_isolation, NULL, }; @@ -523,6 +670,80 @@ bat_priv->mesh_obj = NULL; } +/** + * batadv_sysfs_add_vlan - add all the needed sysfs objects for the new vlan + * @dev: netdev of the mesh interface + * @vlan: private data of the newly added VLAN interface + * + * Returns 0 on success and -ENOMEM if any of the structure allocations fails. + */ +int batadv_sysfs_add_vlan(struct net_device *dev, + struct batadv_softif_vlan *vlan) +{ + char vlan_subdir[sizeof(BATADV_SYSFS_VLAN_SUBDIR_PREFIX) + 5]; + struct batadv_priv *bat_priv = netdev_priv(dev); + struct batadv_attribute **bat_attr; + int err; + + if (vlan->vid & BATADV_VLAN_HAS_TAG) { + sprintf(vlan_subdir, BATADV_SYSFS_VLAN_SUBDIR_PREFIX "%hu", + vlan->vid & VLAN_VID_MASK); + + vlan->kobj = kobject_create_and_add(vlan_subdir, + bat_priv->mesh_obj); + if (!vlan->kobj) { + batadv_err(dev, "Can't add sysfs directory: %s/%s\n", + dev->name, vlan_subdir); + goto out; + } + } else { + /* the untagged LAN uses the root folder to store its "VLAN + * specific attributes" + */ + vlan->kobj = bat_priv->mesh_obj; + kobject_get(bat_priv->mesh_obj); + } + + for (bat_attr = batadv_vlan_attrs; *bat_attr; ++bat_attr) { + err = sysfs_create_file(vlan->kobj, + &((*bat_attr)->attr)); + if (err) { + batadv_err(dev, "Can't add sysfs file: %s/%s/%s\n", + dev->name, vlan_subdir, + ((*bat_attr)->attr).name); + goto rem_attr; + } + } + + return 0; + +rem_attr: + for (bat_attr = batadv_vlan_attrs; *bat_attr; ++bat_attr) + sysfs_remove_file(vlan->kobj, &((*bat_attr)->attr)); + + kobject_put(vlan->kobj); + vlan->kobj = NULL; +out: + return -ENOMEM; +} + +/** + * batadv_sysfs_del_vlan - remove all the sysfs objects for a given VLAN + * @bat_priv: the bat priv with all the soft interface information + * @vlan: the private data of the VLAN to destroy + */ +void batadv_sysfs_del_vlan(struct batadv_priv *bat_priv, + struct batadv_softif_vlan *vlan) +{ + struct batadv_attribute **bat_attr; + + for (bat_attr = batadv_vlan_attrs; *bat_attr; ++bat_attr) + sysfs_remove_file(vlan->kobj, &((*bat_attr)->attr)); + + kobject_put(vlan->kobj); + vlan->kobj = NULL; +} + static ssize_t batadv_show_mesh_iface(struct kobject *kobj, struct attribute *attr, char *buff) { @@ -698,32 +919,24 @@ bat_kobj = &bat_priv->soft_iface->dev.kobj; - uevent_env[0] = kmalloc(strlen(BATADV_UEV_TYPE_VAR) + - strlen(batadv_uev_type_str[type]) + 1, - GFP_ATOMIC); + uevent_env[0] = kasprintf(GFP_ATOMIC, + "%s%s", BATADV_UEV_TYPE_VAR, + batadv_uev_type_str[type]); if (!uevent_env[0]) goto out; - sprintf(uevent_env[0], "%s%s", BATADV_UEV_TYPE_VAR, - batadv_uev_type_str[type]); - - uevent_env[1] = kmalloc(strlen(BATADV_UEV_ACTION_VAR) + - strlen(batadv_uev_action_str[action]) + 1, - GFP_ATOMIC); + uevent_env[1] = kasprintf(GFP_ATOMIC, + "%s%s", BATADV_UEV_ACTION_VAR, + batadv_uev_action_str[action]); if (!uevent_env[1]) goto out; - sprintf(uevent_env[1], "%s%s", BATADV_UEV_ACTION_VAR, - batadv_uev_action_str[action]); - /* If the event is DEL, ignore the data field */ if (action != BATADV_UEV_DEL) { - uevent_env[2] = kmalloc(strlen(BATADV_UEV_DATA_VAR) + - strlen(data) + 1, GFP_ATOMIC); + uevent_env[2] = kasprintf(GFP_ATOMIC, + "%s%s", BATADV_UEV_DATA_VAR, data); if (!uevent_env[2]) goto out; - - sprintf(uevent_env[2], "%s%s", BATADV_UEV_DATA_VAR, data); } ret = kobject_uevent_env(bat_kobj, KOBJ_CHANGE, uevent_env);