--- zzzz-none-000/linux-3.10.107/scripts/kconfig/Makefile 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/scripts/kconfig/Makefile 2021-02-04 17:41:59.000000000 +0000 @@ -2,7 +2,7 @@ # Kernel configuration targets # These targets are used from top-level makefile -PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \ +PHONY += xconfig gconfig menuconfig config silentoldconfig update-po-config \ localmodconfig localyesconfig ifdef KBUILD_KCONFIG @@ -11,50 +11,51 @@ Kconfig := Kconfig endif +ifeq ($(quiet),silent_) +silent := -s +endif + # We need this, in case the user has it in its environment unexport CONFIG_ xconfig: $(obj)/qconf - $< $(Kconfig) + $< $(silent) $(Kconfig) gconfig: $(obj)/gconf - $< $(Kconfig) + $< $(silent) $(Kconfig) menuconfig: $(obj)/mconf - $< $(Kconfig) + $< $(silent) $(Kconfig) config: $(obj)/conf - $< --oldaskconfig $(Kconfig) + $< $(silent) --oldaskconfig $(Kconfig) nconfig: $(obj)/nconf - $< $(Kconfig) - -oldconfig: $(obj)/conf - $< --$@ $(Kconfig) + $< $(silent) $(Kconfig) silentoldconfig: $(obj)/conf - $(Q)mkdir -p include/generated - $< --$@ $(Kconfig) + $(Q)mkdir -p include/config include/generated + $< $(silent) --$@ $(Kconfig) localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)mkdir -p include/generated + $(Q)mkdir -p include/config include/generated $(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config $(Q)if [ -f .config ]; then \ cmp -s .tmp.config .config || \ (mv -f .config .config.old.1; \ mv -f .tmp.config .config; \ - $(obj)/conf --silentoldconfig $(Kconfig); \ + $(obj)/conf $(silent) --silentoldconfig $(Kconfig); \ mv -f .config.old.1 .config.old) \ else \ mv -f .tmp.config .config; \ - $(obj)/conf --silentoldconfig $(Kconfig); \ + $(obj)/conf $(silent) --silentoldconfig $(Kconfig); \ fi $(Q)rm -f .tmp.config # Create new linux.pot file # Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h - $(Q)echo " GEN config.pot" + $(Q)$(kecho) " GEN config.pot" $(Q)xgettext --default-domain=linux \ --add-comments --keyword=_ --keyword=N_ \ --from-code=UTF-8 \ @@ -65,52 +66,76 @@ $(Q)(for i in `ls $(srctree)/arch/*/Kconfig \ $(srctree)/arch/*/um/Kconfig`; \ do \ - echo " GEN $$i"; \ + $(kecho) " GEN $$i"; \ $(obj)/kxgettext $$i \ >> $(obj)/config.pot; \ done ) - $(Q)echo " GEN linux.pot" + $(Q)$(kecho) " GEN linux.pot" $(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \ --output $(obj)/linux.pot $(Q)rm -f $(obj)/config.pot -PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig - -allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf - $< --$@ $(Kconfig) +# These targets map 1:1 to the commandline options of 'conf' +simple-targets := oldconfig allnoconfig allyesconfig allmodconfig \ + alldefconfig randconfig listnewconfig olddefconfig +PHONY += $(simple-targets) -PHONY += listnewconfig olddefconfig oldnoconfig savedefconfig defconfig +$(simple-targets): $(obj)/conf + $< $(silent) --$@ $(Kconfig) -listnewconfig olddefconfig: $(obj)/conf - $< --$@ $(Kconfig) +PHONY += oldnoconfig savedefconfig defconfig # oldnoconfig is an alias of olddefconfig, because people already are dependent -# on its behavior(sets new symbols to their default value but not 'n') with the +# on its behavior (sets new symbols to their default value but not 'n') with the # counter-intuitive name. -oldnoconfig: $(obj)/conf - $< --olddefconfig $(Kconfig) +oldnoconfig: olddefconfig savedefconfig: $(obj)/conf - $< --$@=defconfig $(Kconfig) + $< $(silent) --$@=defconfig $(Kconfig) defconfig: $(obj)/conf ifeq ($(KBUILD_DEFCONFIG),) - $< --defconfig $(Kconfig) + $< $(silent) --defconfig $(Kconfig) else - @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'" - $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)),) + @$(kecho) "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'" + $(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) +else + @$(kecho) "*** Default configuration is based on target '$(KBUILD_DEFCONFIG)'" + $(Q)$(MAKE) -f $(srctree)/Makefile $(KBUILD_DEFCONFIG) +endif endif %_defconfig: $(obj)/conf - $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) + $(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) + +configfiles=$(wildcard $(srctree)/kernel/configs/$@ $(srctree)/arch/$(SRCARCH)/configs/$@) + +%.config: $(obj)/conf + $(if $(call configfiles),, $(error No configuration exists for this target on this architecture)) + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m .config $(configfiles) + +$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig + +PHONY += kvmconfig +kvmconfig: kvm_guest.config + @: + +PHONY += xenconfig +xenconfig: xen.config + @: + +PHONY += tinyconfig +tinyconfig: + $(Q)$(MAKE) -f $(srctree)/Makefile allnoconfig tiny.config # Help text used by make help help: @echo ' config - Update current config utilising a line-oriented program' - @echo ' nconfig - Update current config utilising a ncurses menu based program' + @echo ' nconfig - Update current config utilising a ncurses menu based' + @echo ' program' @echo ' menuconfig - Update current config utilising a menu based program' - @echo ' xconfig - Update current config utilising a QT based front-end' - @echo ' gconfig - Update current config utilising a GTK based front-end' + @echo ' xconfig - Update current config utilising a Qt based front-end' + @echo ' gconfig - Update current config utilising a GTK+ based front-end' @echo ' oldconfig - Update current config utilising a provided .config as base' @echo ' localmodconfig - Update current config disabling modules not loaded' @echo ' localyesconfig - Update current config converting local mods to core' @@ -123,7 +148,11 @@ @echo ' alldefconfig - New config with all symbols set to default' @echo ' randconfig - New config with random answer to all options' @echo ' listnewconfig - List new options' - @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' + @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their' + @echo ' default value' + @echo ' kvmconfig - Enable additional options for kvm guest kernel support' + @echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support' + @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh @@ -132,6 +161,9 @@ # we really need to do so. (Do not call gcc as part of make mrproper) HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \ -DLOCALE +ifeq ($(shell uname -s),Darwin) +HOST_LOADLIBES += -lncurses +endif # =========================================================================== # Shared Makefile for the various kconfig executables: @@ -141,9 +173,9 @@ # mconf: Used for the menuconfig target # Utilizes the lxdialog package # qconf: Used for the xconfig target -# Based on QT which needs to be installed to compile it +# Based on Qt which needs to be installed to compile it # gconf: Used for the gconfig target -# Based on GTK which needs to be installed to compile it +# Based on GTK+ which needs to be installed to compile it # object files used by all kconfig flavours lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o @@ -157,39 +189,10 @@ qconf-objs := zconf.tab.o gconf-objs := gconf.o zconf.tab.o -hostprogs-y := conf - -ifeq ($(MAKECMDGOALS),nconfig) - hostprogs-y += nconf -endif - -ifeq ($(MAKECMDGOALS),menuconfig) - hostprogs-y += mconf -endif - -ifeq ($(MAKECMDGOALS),update-po-config) - hostprogs-y += kxgettext -endif - -ifeq ($(MAKECMDGOALS),xconfig) - qconf-target := 1 -endif -ifeq ($(MAKECMDGOALS),gconfig) - gconf-target := 1 -endif - - -ifeq ($(qconf-target),1) - hostprogs-y += qconf -endif - -ifeq ($(gconf-target),1) - hostprogs-y += gconf -endif +hostprogs-y := conf nconf mconf kxgettext qconf gconf clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h -clean-files += mconf qconf gconf nconf clean-files += config.pot linux.pot # Check that we have the required ncurses stuff installed for lxdialog (menuconfig) @@ -220,59 +223,32 @@ HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) HOSTLOADLIBES_nconf = $(shell \ - pkg-config --libs menu panel ncurses 2>/dev/null \ + pkg-config --libs menuw panelw ncursesw 2>/dev/null \ + || pkg-config --libs menu panel ncurses 2>/dev/null \ || echo "-lmenu -lpanel -lncurses" ) $(obj)/qconf.o: $(obj)/.tmp_qtcheck -ifeq ($(qconf-target),1) +ifeq ($(MAKECMDGOALS),xconfig) $(obj)/.tmp_qtcheck: $(src)/Makefile -include $(obj)/.tmp_qtcheck -# QT needs some extra effort... +# Qt needs some extra effort... $(obj)/.tmp_qtcheck: - @set -e; echo " CHECK qt"; dir=""; pkg=""; \ - if ! pkg-config --exists QtCore 2> /dev/null; then \ - echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \ - pkg-config --exists qt 2> /dev/null && pkg=qt; \ - pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ - if [ -n "$$pkg" ]; then \ - cflags="\$$(shell pkg-config $$pkg --cflags)"; \ - libs="\$$(shell pkg-config $$pkg --libs)"; \ - moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ - dir="$$(pkg-config $$pkg --variable=prefix)"; \ - else \ - for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ - if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ - done; \ - if [ -z "$$dir" ]; then \ - echo >&2 "*"; \ - echo >&2 "* Unable to find any QT installation. Please make sure that"; \ - echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \ - echo >&2 "* either qmake can be found or install pkg-config or set"; \ - echo >&2 "* the QTDIR environment variable to the correct location."; \ - echo >&2 "*"; \ - false; \ - fi; \ - libpath=$$dir/lib; lib=qt; osdir=""; \ - $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ - osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ - test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ - test -f $$libpath/libqt-mt.so && lib=qt-mt; \ - cflags="-I$$dir/include"; \ - libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ - moc="$$dir/bin/moc"; \ - fi; \ - if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ - echo "*"; \ - echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ - echo "*"; \ - moc="/usr/bin/moc"; \ - fi; \ + @set -e; $(kecho) " CHECK qt"; \ + if pkg-config --exists Qt5Core; then \ + cflags="-std=c++11 -fPIC `pkg-config --cflags Qt5Core Qt5Gui Qt5Widgets`"; \ + libs=`pkg-config --libs Qt5Core Qt5Gui Qt5Widgets`; \ + moc=`pkg-config --variable=host_bins Qt5Core`/moc; \ + elif pkg-config --exists QtCore; then \ + cflags=`pkg-config --cflags QtCore QtGui`; \ + libs=`pkg-config --libs QtCore QtGui`; \ + moc=`pkg-config --variable=moc_location QtCore`; \ else \ - cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \ - libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \ - moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \ - [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \ + echo >&2 "*"; \ + echo >&2 "* Could not find Qt via pkg-config."; \ + echo >&2 "* Please install either Qt 4.8 or 5.x. and make sure it's in PKG_CONFIG_PATH"; \ + echo >&2 "*"; \ + exit 1; \ fi; \ echo "KC_QT_CFLAGS=$$cflags" > $@; \ echo "KC_QT_LIBS=$$libs" >> $@; \ @@ -281,10 +257,10 @@ $(obj)/gconf.o: $(obj)/.tmp_gtkcheck -ifeq ($(gconf-target),1) +ifeq ($(MAKECMDGOALS),gconfig) -include $(obj)/.tmp_gtkcheck -# GTK needs some extra effort, too... +# GTK+ needs some extra effort, too... $(obj)/.tmp_gtkcheck: @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \ if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \ @@ -315,8 +291,7 @@ $(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck $(call cmd,moc) -# Extract gconf menu items for I18N support +# Extract gconf menu items for i18n support $(obj)/gconf.glade.h: $(obj)/gconf.glade $(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \ $(obj)/gconf.glade -