--- zzzz-none-000/linux-3.10.107/scripts/kconfig/mconf.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/scripts/kconfig/mconf.c	2021-02-04 17:41:59.000000000 +0000
@@ -25,7 +25,7 @@
 static const char mconf_readme[] = N_(
 "Overview\n"
 "--------\n"
-"This interface let you select features and parameters for the build.\n"
+"This interface lets you select features and parameters for the build.\n"
 "Features can either be built-in, modularized, or ignored. Parameters\n"
 "must be entered in as decimal or hexadecimal numbers or text.\n"
 "\n"
@@ -39,16 +39,16 @@
 "\n"
 "To change any of these features, highlight it with the cursor\n"
 "keys and press <Y> to build it in, <M> to make it a module or\n"
-"<N> to removed it.  You may also press the <Space Bar> to cycle\n"
-"through the available options (ie. Y->N->M->Y).\n"
+"<N> to remove it.  You may also press the <Space Bar> to cycle\n"
+"through the available options (i.e. Y->N->M->Y).\n"
 "\n"
 "Some additional keyboard hints:\n"
 "\n"
 "Menus\n"
 "----------\n"
-"o  Use the Up/Down arrow keys (cursor keys) to highlight the item\n"
-"   you wish to change or submenu wish to select and press <Enter>.\n"
-"   Submenus are designated by \"--->\".\n"
+"o  Use the Up/Down arrow keys (cursor keys) to highlight the item you\n"
+"   wish to change or the submenu you wish to select and press <Enter>.\n"
+"   Submenus are designated by \"--->\", empty ones by \"----\".\n"
 "\n"
 "   Shortcut: Press the option's highlighted letter (hotkey).\n"
 "             Pressing a hotkey more than once will sequence\n"
@@ -65,7 +65,7 @@
 "             there is a delayed response which you may find annoying.\n"
 "\n"
 "   Also, the <TAB> and cursor keys will cycle between <Select>,\n"
-"   <Exit> and <Help>.\n"
+"   <Exit>, <Help>, <Save>, and <Load>.\n"
 "\n"
 "o  To get help with an item, use the cursor keys to highlight <Help>\n"
 "   and press <ENTER>.\n"
@@ -105,7 +105,7 @@
 "Text Box    (Help Window)\n"
 "--------\n"
 "o  Use the cursor keys to scroll up/down/left/right.  The VI editor\n"
-"   keys h,j,k,l function here as do <u>, <d>, <SPACE BAR> and <B> for \n"
+"   keys h,j,k,l function here as do <u>, <d>, <SPACE BAR> and <B> for\n"
 "   those who are familiar with less and lynx.\n"
 "\n"
 "o  Press <E>, <X>, <q>, <Enter> or <Esc><Esc> to exit.\n"
@@ -117,23 +117,21 @@
 "those who, for various reasons, find it necessary to switch\n"
 "between different configurations.\n"
 "\n"
-"At the end of the main menu you will find two options.  One is\n"
-"for saving the current configuration to a file of your choosing.\n"
-"The other option is for loading a previously saved alternate\n"
-"configuration.\n"
-"\n"
-"Even if you don't use alternate configuration files, but you\n"
-"find during a Menuconfig session that you have completely messed\n"
-"up your settings, you may use the \"Load Alternate...\" option to\n"
-"restore your previously saved settings from \".config\" without\n"
-"restarting Menuconfig.\n"
+"The <Save> button will let you save the current configuration to\n"
+"a file of your choosing.  Use the <Load> button to load a previously\n"
+"saved alternate configuration.\n"
+"\n"
+"Even if you don't use alternate configuration files, but you find\n"
+"during a Menuconfig session that you have completely messed up your\n"
+"settings, you may use the <Load> button to restore your previously\n"
+"saved settings from \".config\" without restarting Menuconfig.\n"
 "\n"
 "Other information\n"
 "-----------------\n"
-"If you use Menuconfig in an XTERM window make sure you have your\n"
-"$TERM variable set to point to a xterm definition which supports color.\n"
-"Otherwise, Menuconfig will look rather bad.  Menuconfig will not\n"
-"display correctly in a RXVT window because rxvt displays only one\n"
+"If you use Menuconfig in an XTERM window, make sure you have your\n"
+"$TERM variable set to point to an xterm definition which supports\n"
+"color.  Otherwise, Menuconfig will look rather bad.  Menuconfig will\n"
+"not display correctly in an RXVT window because rxvt displays only one\n"
 "intensity of color, bright.\n"
 "\n"
 "Menuconfig will display larger menus on screens or xterms which are\n"
@@ -148,8 +146,8 @@
 "\n"
 "Optional personality available\n"
 "------------------------------\n"
-"If you prefer to have all of the options listed in a single menu, rather\n"
-"than the default multimenu hierarchy, run the menuconfig with\n"
+"If you prefer to have all of the options listed in a single menu,\n"
+"rather than the default multimenu hierarchy, run the menuconfig with\n"
 "MENUCONFIG_MODE environment variable set to single_menu. Example:\n"
 "\n"
 "make MENUCONFIG_MODE=single_menu menuconfig\n"
@@ -172,11 +170,11 @@
 " mono       => selects colors suitable for monochrome displays\n"
 " blackbg    => selects a color scheme with black background\n"
 " classic    => theme with blue background. The classic look\n"
-" bluetitle  => a LCD friendly version of classic. (default)\n"
+" bluetitle  => an LCD friendly version of classic. (default)\n"
 "\n"),
 menu_instructions[] = N_(
 	"Arrow keys navigate the menu.  "
-	"<Enter> selects submenus --->.  "
+	"<Enter> selects submenus ---> (or empty submenus ----).  "
 	"Highlighted letters are hotkeys.  "
 	"Pressing <Y> includes, <N> excludes, <M> modularizes features.  "
 	"Press <Esc><Esc> to exit, <?> for Help, </> for Search.  "
@@ -238,24 +236,24 @@
 	"Symbol: FOO [=m]\n"
 	"Type  : tristate\n"
 	"Prompt: Foo bus is used to drive the bar HW\n"
-	"  Defined at drivers/pci/Kconfig:47\n"
-	"  Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n"
 	"  Location:\n"
 	"    -> Bus options (PCI, PCMCIA, EISA, ISA)\n"
 	"      -> PCI support (PCI [=y])\n"
 	"(1)     -> PCI access mode (<choice> [=y])\n"
+	"  Defined at drivers/pci/Kconfig:47\n"
+	"  Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n"
 	"  Selects: LIBCRC32\n"
-	"  Selected by: BAR\n"
+	"  Selected by: BAR [=n]\n"
 	"-----------------------------------------------------------------\n"
 	"o The line 'Type:' shows the type of the configuration option for\n"
 	"  this symbol (boolean, tristate, string, ...)\n"
 	"o The line 'Prompt:' shows the text used in the menu structure for\n"
 	"  this symbol\n"
-	"o The 'Defined at' line tell at what file / line number the symbol\n"
+	"o The 'Defined at' line tells at what file / line number the symbol\n"
 	"  is defined\n"
-	"o The 'Depends on:' line tell what symbols needs to be defined for\n"
+	"o The 'Depends on:' line tells what symbols need to be defined for\n"
 	"  this symbol to be visible in the menu (selectable)\n"
-	"o The 'Location:' lines tell where in the menu structure this symbol\n"
+	"o The 'Location:' lines tells where in the menu structure this symbol\n"
 	"  is located\n"
 	"    A location followed by a [=y] indicates that this is a\n"
 	"    selectable menu item - and the current value is displayed inside\n"
@@ -263,9 +261,9 @@
 	"    Press the key in the (#) prefix to jump directly to that\n"
 	"    location. You will be returned to the current search results\n"
 	"    after exiting this new menu.\n"
-	"o The 'Selects:' line tell what symbol will be automatically\n"
+	"o The 'Selects:' line tells what symbols will be automatically\n"
 	"  selected if this symbol is selected (y or m)\n"
-	"o The 'Selected by' line tell what symbol has selected this symbol\n"
+	"o The 'Selected by' line tells what symbol has selected this symbol\n"
 	"\n"
 	"Only relevant lines are shown.\n"
 	"\n\n"
@@ -281,6 +279,7 @@
 static int single_menu_mode;
 static int show_all_options;
 static int save_and_exit;
+static int silent;
 
 static void conf(struct menu *menu, struct menu *active_menu);
 static void conf_choice(struct menu *menu);
@@ -301,7 +300,7 @@
 	int size;
 
 	size = snprintf(menu_backtitle, sizeof(menu_backtitle),
-	                "%s - %s", config_filename, rootmenu.prompt->text);
+			"%s - %s", config_filename, rootmenu.prompt->text);
 	if (size >= sizeof(menu_backtitle))
 		menu_backtitle[sizeof(menu_backtitle)-1] = '\0';
 	set_dialog_backtitle(menu_backtitle);
@@ -332,10 +331,10 @@
 	list_for_each_entry(sp, &trail, entries) {
 		if (sp->text) {
 			if (pos) {
-				pos->next = xcalloc(sizeof(*pos), 1);
+				pos->next = xcalloc(1, sizeof(*pos));
 				pos = pos->next;
 			} else {
-				subtitles = pos = xcalloc(sizeof(*pos), 1);
+				subtitles = pos = xcalloc(1, sizeof(*pos));
 			}
 			pos->text = sp->text;
 		}
@@ -401,8 +400,8 @@
 	struct subtitle_part stpart;
 
 	title = str_new();
-	str_printf( &title, _("Enter %s (sub)string to search for "
-			      "(with or without \"%s\")"), CONFIG_, CONFIG_);
+	str_printf( &title, _("Enter (sub)string or regexp to search for "
+			      "(with or without \"%s\")"), CONFIG_);
 
 again:
 	dialog_clear();
@@ -498,8 +497,9 @@
 						  menu->data ? "-->" : "++>",
 						  indent + 1, ' ', prompt);
 				} else
-					item_make("   %*c%s  --->", indent + 1, ' ', prompt);
-
+					item_make("   %*c%s  %s",
+						  indent + 1, ' ', prompt,
+						  menu_is_empty(menu) ? "----" : "--->");
 				item_set_tag('m');
 				item_set_data(menu);
 				if (single_menu_mode && menu->data)
@@ -630,7 +630,7 @@
 			  (sym_has_value(sym) || !sym_is_changable(sym)) ?
 			  "" : _(" (NEW)"));
 		if (menu->prompt->type == P_MENU) {
-			item_add_str("  --->");
+			item_add_str("  %s", menu_is_empty(menu) ? "----" : "--->");
 			return;
 		}
 	}
@@ -778,10 +778,12 @@
 	char buf[PATH_MAX+1];
 
 	vsnprintf(buf, sizeof(buf), fmt, ap);
-	if (save_and_exit)
-		printf("%s", buf);
-	else
+	if (save_and_exit) {
+		if (!silent)
+			printf("%s", buf);
+	} else {
 		show_textbox(NULL, buf, 6, 60);
+	}
 }
 
 static void show_help(struct menu *menu)
@@ -826,7 +828,9 @@
 		dialog_clear();
 		res = dialog_checklist(prompt ? _(prompt) : _("Main Menu"),
 					_(radiolist_instructions),
-					 15, 70, 6);
+					MENUBOX_HEIGTH_MIN,
+					MENUBOX_WIDTH_MIN,
+					CHECKLIST_HEIGTH_MIN);
 		selected = item_activate_selected();
 		switch (res) {
 		case 0:
@@ -957,8 +961,8 @@
 	dialog_clear();
 	if (conf_get_changed())
 		res = dialog_yesno(NULL,
-				   _("Do you wish to save your new configuration ?\n"
-				     "<ESC><ESC> to continue."),
+				   _("Do you wish to save your new configuration?\n"
+				     "(Press <ESC><ESC> to continue kernel configuration.)"),
 				   6, 60);
 	else
 		res = -1;
@@ -976,16 +980,18 @@
 		}
 		/* fall through */
 	case -1:
-		printf(_("\n\n"
-			 "*** End of the configuration.\n"
-			 "*** Execute 'make' to start the build or try 'make help'."
-			 "\n\n"));
+		if (!silent)
+			printf(_("\n\n"
+				 "*** End of the configuration.\n"
+				 "*** Execute 'make' to start the build or try 'make help'."
+				 "\n\n"));
 		res = 0;
 		break;
 	default:
-		fprintf(stderr, _("\n\n"
-				  "Your configuration changes were NOT saved."
-				  "\n\n"));
+		if (!silent)
+			fprintf(stderr, _("\n\n"
+					  "Your configuration changes were NOT saved."
+					  "\n\n"));
 		if (res != KEY_ESC)
 			res = 0;
 	}
@@ -1009,6 +1015,12 @@
 
 	signal(SIGINT, sig_handler);
 
+	if (ac > 1 && strcmp(av[1], "-s") == 0) {
+		silent = 1;
+		/* Silence conf_read() until the real callback is set up */
+		conf_set_message_callback(NULL);
+		av++;
+	}
 	conf_parse(av[1]);
 	conf_read(NULL);
 
@@ -1033,4 +1045,3 @@
 
 	return res;
 }
-