--- zzzz-none-000/linux-3.10.107/sound/soc/blackfin/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/sound/soc/blackfin/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -11,20 +11,20 @@
 
 config SND_BF5XX_SOC_SSM2602
 	tristate "SoC SSM2602 Audio Codec Add-On Card support"
-	depends on SND_BF5XX_I2S && (SPI_MASTER || I2C)
+	depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
 	select SND_BF5XX_SOC_I2S if !BF60x
 	select SND_BF6XX_SOC_I2S if BF60x
-	select SND_SOC_SSM2602
+	select SND_SOC_SSM2602_SPI if SPI_MASTER
+	select SND_SOC_SSM2602_I2C if I2C
 	help
 	  Say Y if you want to add support for the Analog Devices
 	  SSM2602 Audio Codec Add-On Card.
 
 config SND_SOC_BFIN_EVAL_ADAU1701
 	tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards"
-	depends on SND_BF5XX_I2S
+	depends on SND_BF5XX_I2S && I2C
 	select SND_BF5XX_SOC_I2S
 	select SND_SOC_ADAU1701
-	select I2C
 	help
 	  Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ
 	  board connected to one of the Blackfin evaluation boards like the
@@ -43,11 +43,38 @@
 	  Note: This driver assumes that first ADAU1373 DAI is connected to the
 	  first SPORT port on the BF5XX board.
 
+config SND_SOC_BFIN_EVAL_ADAU1X61
+	tristate "Support for the EVAL-ADAU1X61 board on Blackfin eval boards"
+	depends on SND_BF5XX_I2S && I2C
+	select SND_BF5XX_SOC_I2S
+	select SND_SOC_ADAU1761_I2C
+	help
+	  Say Y if you want to add support for the Analog Devices EVAL-ADAU1X61
+	  board connected to one of the Blackfin evaluation boards like the
+	  BF5XX-STAMP or BF5XX-EZKIT.
+
+	  Note: This driver assumes that the ADAU1X61 is connected to the
+	  first SPORT port on the BF5XX board.
+
+config SND_SOC_BFIN_EVAL_ADAU1X81
+	tristate "Support for the EVAL-ADAU1X81 boards on Blackfin eval boards"
+	depends on SND_BF5XX_I2S && I2C
+	select SND_BF5XX_SOC_I2S
+	select SND_SOC_ADAU1781_I2C
+	help
+	  Say Y if you want to add support for the Analog Devices EVAL-ADAU1X81
+	  board connected to one of the Blackfin evaluation boards like the
+	  BF5XX-STAMP or BF5XX-EZKIT.
+
+	  Note: This driver assumes that the ADAU1X81 is connected to the
+	  first SPORT port on the BF5XX board.
+
 config SND_SOC_BFIN_EVAL_ADAV80X
 	tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards"
-	depends on SND_BF5XX_I2S && (SPI_MASTER || I2C)
+	depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
 	select SND_BF5XX_SOC_I2S
-	select SND_SOC_ADAV80X
+	select SND_SOC_ADAV801 if SPI_MASTER
+	select SND_SOC_ADAV803 if I2C
 	help
 	  Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or
 	  EVAL-ADAV803 board connected to one of the Blackfin evaluation boards
@@ -56,6 +83,24 @@
 	  Note: This driver assumes that the ADAV80X digital record and playback
 	  interfaces are connected to the first SPORT port on the BF5XX board.
 
+config SND_BF5XX_SOC_AD1836
+	tristate "SoC AD1836 Audio support for BF5xx"
+	depends on SND_BF5XX_I2S && SPI_MASTER
+	select SND_BF5XX_SOC_I2S
+	select SND_SOC_AD1836
+	help
+	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
+config SND_BF5XX_SOC_AD193X
+	tristate "SoC AD193X Audio support for Blackfin"
+	depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
+	select SND_BF5XX_SOC_I2S
+	select SND_SOC_AD193X_I2C if I2C
+	select SND_SOC_AD193X_SPI if SPI_MASTER
+	help
+	  Say Y if you want to add support for AD193X codec on Blackfin.
+	  This driver supports AD1936, AD1937, AD1938 and AD1939.
+
 config SND_BF5XX_SOC_AD73311
 	tristate "SoC AD73311 Audio support for Blackfin"
 	depends on SND_BF5XX_I2S
@@ -72,33 +117,6 @@
 	  Enter the GPIO used to control AD73311's SE pin. Acceptable
 	  values are 0 to 7
 
-config SND_BF5XX_TDM
-	tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
-	depends on (BLACKFIN && SND_SOC)
-	select SND_BF5XX_SOC_SPORT
-	help
-	  Say Y or M if you want to add support for codecs attached to
-	  the Blackfin SPORT (synchronous serial ports) interface in TDM
-	  mode.
-	  You will also need to select the audio interfaces to support below.
-
-config SND_BF5XX_SOC_AD1836
-	tristate "SoC AD1836 Audio support for BF5xx"
-	depends on SND_BF5XX_TDM
-	select SND_BF5XX_SOC_TDM
-	select SND_SOC_AD1836
-	help
-	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-
-config SND_BF5XX_SOC_AD193X
-	tristate "SoC AD193X Audio support for Blackfin"
-	depends on SND_BF5XX_TDM
-	select SND_BF5XX_SOC_TDM
-	select SND_SOC_AD193X
-	help
-	  Say Y if you want to add support for AD193X codec on Blackfin.
-	  This driver supports AD1936, AD1937, AD1938 and AD1939.
-
 config SND_BF5XX_AC97
 	tristate "SoC AC97 Audio for the ADI BF5xx chip"
 	depends on BLACKFIN
@@ -174,9 +192,6 @@
 config SND_BF6XX_SOC_I2S
 	tristate
 
-config SND_BF5XX_SOC_TDM
-	tristate
-
 config SND_BF5XX_SOC_AC97
 	tristate