--- zzzz-none-000/linux-3.10.107/sound/soc/codecs/wm8960.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/sound/soc/codecs/wm8960.c 2021-02-04 17:41:59.000000000 +0000 @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -47,6 +48,9 @@ #define WM8960_DISOP 0x40 #define WM8960_DRES_MASK 0x30 +static bool is_pll_freq_available(unsigned int source, unsigned int target); +static int wm8960_set_pll(struct snd_soc_codec *codec, + unsigned int freq_in, unsigned int freq_out); /* * wm8960 register cache * We can't read the WM8960 register space when we are @@ -117,6 +121,7 @@ } struct wm8960_priv { + struct clk *mclk; struct regmap *regmap; int (*set_bias_level)(struct snd_soc_codec *, enum snd_soc_bias_level level); @@ -124,10 +129,16 @@ struct snd_soc_dapm_widget *rout1; struct snd_soc_dapm_widget *out3; bool deemph; - int playback_fs; + int lrclk; + int bclk; + int sysclk; + int clk_id; + int freq_in; + bool is_stream_in_use[2]; + struct wm8960_data pdata; }; -#define wm8960_reset(c) snd_soc_write(c, WM8960_RESET, 0) +#define wm8960_reset(c) regmap_write(c, WM8960_RESET, 0) /* enumerated controls */ static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted", @@ -159,8 +170,8 @@ if (wm8960->deemph) { best = 1; for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) { - if (abs(deemph_settings[i] - wm8960->playback_fs) < - abs(deemph_settings[best] - wm8960->playback_fs)) + if (abs(deemph_settings[i] - wm8960->lrclk) < + abs(deemph_settings[best] - wm8960->lrclk)) best = i; } @@ -178,7 +189,7 @@ static int wm8960_get_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { - struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); ucontrol->value.integer.value[0] = wm8960->deemph; @@ -188,9 +199,9 @@ static int wm8960_put_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { - struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); - int deemph = ucontrol->value.integer.value[0]; + unsigned int deemph = ucontrol->value.integer.value[0]; if (deemph > 1) return -EINVAL; @@ -200,28 +211,38 @@ return wm8960_set_deemph(codec); } -static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0); -static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1); +static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1); +static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1725, 75, 0); +static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1); static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0); static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); -static const DECLARE_TLV_DB_SCALE(boost_tlv, -1200, 300, 1); +static const DECLARE_TLV_DB_SCALE(lineinboost_tlv, -1500, 300, 1); +static const unsigned int micboost_tlv[] = { + TLV_DB_RANGE_HEAD(2), + 0, 1, TLV_DB_SCALE_ITEM(0, 1300, 0), + 2, 3, TLV_DB_SCALE_ITEM(2000, 900, 0), +}; static const struct snd_kcontrol_new wm8960_snd_controls[] = { SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL, - 0, 63, 0, adc_tlv), + 0, 63, 0, inpga_tlv), SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL, 6, 1, 0), SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL, - 7, 1, 0), + 7, 1, 1), SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT3 Volume", - WM8960_INBMIX1, 4, 7, 0, boost_tlv), + WM8960_INBMIX1, 4, 7, 0, lineinboost_tlv), SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT2 Volume", - WM8960_INBMIX1, 1, 7, 0, boost_tlv), + WM8960_INBMIX1, 1, 7, 0, lineinboost_tlv), SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT3 Volume", - WM8960_INBMIX2, 4, 7, 0, boost_tlv), + WM8960_INBMIX2, 4, 7, 0, lineinboost_tlv), SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT2 Volume", - WM8960_INBMIX2, 1, 7, 0, boost_tlv), + WM8960_INBMIX2, 1, 7, 0, lineinboost_tlv), +SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT1 Volume", + WM8960_RINPATH, 4, 3, 0, micboost_tlv), +SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT1 Volume", + WM8960_LINPATH, 4, 3, 0, micboost_tlv), SOC_DOUBLE_R_TLV("Playback Volume", WM8960_LDAC, WM8960_RDAC, 0, 255, 0, dac_tlv), @@ -263,8 +284,8 @@ SOC_SINGLE("Noise Gate Threshold", WM8960_NOISEG, 3, 31, 0), SOC_SINGLE("Noise Gate Switch", WM8960_NOISEG, 0, 1, 0), -SOC_DOUBLE_R("ADC PCM Capture Volume", WM8960_LINPATH, WM8960_RINPATH, - 0, 127, 0), +SOC_DOUBLE_R_TLV("ADC PCM Capture Volume", WM8960_LADC, WM8960_RADC, + 0, 255, 0, adc_tlv), SOC_SINGLE_TLV("Left Output Mixer Boost Bypass Volume", WM8960_BYPASS1, 4, 7, 1, bypass_tlv), @@ -440,9 +461,9 @@ static int wm8960_add_widgets(struct snd_soc_codec *codec) { - struct wm8960_data *pdata = codec->dev->platform_data; struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); - struct snd_soc_dapm_context *dapm = &codec->dapm; + struct wm8960_data *pdata = &wm8960->pdata; + struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec); struct snd_soc_dapm_widget *w; snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets, @@ -472,8 +493,8 @@ * list each time to find the desired power state do so now * and save the result. */ - list_for_each_entry(w, &codec->card->widgets, list) { - if (w->dapm != &codec->dapm) + list_for_each_entry(w, &codec->component.card->widgets, list) { + if (w->dapm != dapm) continue; if (strcmp(w->name, "LOUT1 PGA") == 0) wm8960->lout1 = w; @@ -560,6 +581,124 @@ { 8000, 5 }, }; +/* -1 for reserved value */ +static const int sysclk_divs[] = { 1, -1, 2, -1 }; + +/* Multiply 256 for internal 256 div */ +static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 }; + +/* Multiply 10 to eliminate decimials */ +static const int bclk_divs[] = { + 10, 15, 20, 30, 40, 55, 60, 80, 110, + 120, 160, 220, 240, 320, 320, 320 +}; + +static int wm8960_configure_clocking(struct snd_soc_codec *codec) +{ + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int sysclk, bclk, lrclk, freq_out, freq_in; + u16 iface1 = snd_soc_read(codec, WM8960_IFACE1); + int i, j, k; + + if (!(iface1 & (1<<6))) { + dev_dbg(codec->dev, + "Codec is slave mode, no need to configure clock\n"); + return 0; + } + + if (wm8960->clk_id != WM8960_SYSCLK_MCLK && !wm8960->freq_in) { + dev_err(codec->dev, "No MCLK configured\n"); + return -EINVAL; + } + + freq_in = wm8960->freq_in; + bclk = wm8960->bclk; + lrclk = wm8960->lrclk; + /* + * If it's sysclk auto mode, check if the MCLK can provide sysclk or + * not. If MCLK can provide sysclk, using MCLK to provide sysclk + * directly. Otherwise, auto select a available pll out frequency + * and set PLL. + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO) { + /* disable the PLL and using MCLK to provide sysclk */ + wm8960_set_pll(codec, 0, 0); + freq_out = freq_in; + } else if (wm8960->sysclk) { + freq_out = wm8960->sysclk; + } else { + dev_err(codec->dev, "No SYSCLK configured\n"); + return -EINVAL; + } + + /* check if the sysclk frequency is available. */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + sysclk = freq_out / sysclk_divs[i]; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + if (sysclk == dac_divs[j] * lrclk) { + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) + if (sysclk == bclk * bclk_divs[k] / 10) + break; + if (k != ARRAY_SIZE(bclk_divs)) + break; + } + } + if (j != ARRAY_SIZE(dac_divs)) + break; + } + + if (i != ARRAY_SIZE(sysclk_divs)) { + goto configure_clock; + } else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; + } + /* get a available pll out frequency and set pll */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + sysclk = lrclk * dac_divs[j]; + freq_out = sysclk * sysclk_divs[i]; + + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) { + if (sysclk == bclk * bclk_divs[k] / 10 && + is_pll_freq_available(freq_in, freq_out)) { + wm8960_set_pll(codec, + freq_in, freq_out); + break; + } else { + continue; + } + } + if (k != ARRAY_SIZE(bclk_divs)) + break; + } + if (j != ARRAY_SIZE(dac_divs)) + break; + } + + if (i == ARRAY_SIZE(sysclk_divs)) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; + } + +configure_clock: + /* configure sysclk clock */ + snd_soc_update_bits(codec, WM8960_CLOCK1, 3 << 1, i << 1); + + /* configure frame clock */ + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, j << 3); + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, j << 6); + + /* configure bit clock */ + snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, k); + + return 0; +} + static int wm8960_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) @@ -567,30 +706,38 @@ struct snd_soc_codec *codec = dai->codec; struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); u16 iface = snd_soc_read(codec, WM8960_IFACE1) & 0xfff3; - snd_pcm_format_t format = params_format(params); + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; int i; + wm8960->bclk = snd_soc_params_to_bclk(params); + if (params_channels(params) == 1) + wm8960->bclk *= 2; + /* bit size */ - switch (format) { - case SNDRV_PCM_FORMAT_S16_LE: - case SNDRV_PCM_FORMAT_S16_BE: + switch (params_width(params)) { + case 16: break; - case SNDRV_PCM_FORMAT_S20_3LE: - case SNDRV_PCM_FORMAT_S20_3BE: + case 20: iface |= 0x0004; break; - case SNDRV_PCM_FORMAT_S24_LE: - case SNDRV_PCM_FORMAT_S24_BE: + case 24: iface |= 0x0008; break; + case 32: + /* right justify mode does not support 32 word length */ + if ((iface & 0x3) != 0) { + iface |= 0x000c; + break; + } default: - dev_err(codec->dev, "unsupported format %i\n", format); + dev_err(codec->dev, "unsupported width %d\n", + params_width(params)); return -EINVAL; } + wm8960->lrclk = params_rate(params); /* Update filters for the new rate */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - wm8960->playback_fs = params_rate(params); + if (tx) { wm8960_set_deemph(codec); } else { for (i = 0; i < ARRAY_SIZE(alc_rates); i++) @@ -602,6 +749,25 @@ /* set iface */ snd_soc_write(codec, WM8960_IFACE1, iface); + + wm8960->is_stream_in_use[tx] = true; + + if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_ON && + !wm8960->is_stream_in_use[!tx]) + return wm8960_configure_clocking(codec); + + return 0; +} + +static int wm8960_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + + wm8960->is_stream_in_use[tx] = false; + return 0; } @@ -620,18 +786,54 @@ enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + u16 pm2 = snd_soc_read(codec, WM8960_POWER2); + int ret; switch (level) { case SND_SOC_BIAS_ON: break; case SND_SOC_BIAS_PREPARE: - /* Set VMID to 2x50k */ - snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); + switch (snd_soc_codec_get_bias_level(codec)) { + case SND_SOC_BIAS_STANDBY: + if (!IS_ERR(wm8960->mclk)) { + ret = clk_prepare_enable(wm8960->mclk); + if (ret) { + dev_err(codec->dev, + "Failed to enable MCLK: %d\n", + ret); + return ret; + } + } + + ret = wm8960_configure_clocking(codec); + if (ret) + return ret; + + /* Set VMID to 2x50k */ + snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); + break; + + case SND_SOC_BIAS_ON: + /* + * If it's sysclk auto mode, and the pll is enabled, + * disable the pll + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1)) + wm8960_set_pll(codec, 0, 0); + + if (!IS_ERR(wm8960->mclk)) + clk_disable_unprepare(wm8960->mclk); + break; + + default: + break; + } + break; case SND_SOC_BIAS_STANDBY: - if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { + if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { regcache_sync(wm8960->regmap); /* Enable anti-pop features */ @@ -667,8 +869,6 @@ break; } - codec->dapm.bias_level = level; - return 0; } @@ -676,14 +876,15 @@ enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); - int reg; + u16 pm2 = snd_soc_read(codec, WM8960_POWER2); + int reg, ret; switch (level) { case SND_SOC_BIAS_ON: break; case SND_SOC_BIAS_PREPARE: - switch (codec->dapm.bias_level) { + switch (snd_soc_codec_get_bias_level(codec)) { case SND_SOC_BIAS_STANDBY: /* Enable anti pop mode */ snd_soc_update_bits(codec, WM8960_APOP1, @@ -717,9 +918,34 @@ WM8960_VREF, WM8960_VREF); msleep(100); + + if (!IS_ERR(wm8960->mclk)) { + ret = clk_prepare_enable(wm8960->mclk); + if (ret) { + dev_err(codec->dev, + "Failed to enable MCLK: %d\n", + ret); + return ret; + } + } + + ret = wm8960_configure_clocking(codec); + if (ret) + return ret; + break; case SND_SOC_BIAS_ON: + /* + * If it's sysclk auto mode, and the pll is enabled, + * disable the pll + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1)) + wm8960_set_pll(codec, 0, 0); + + if (!IS_ERR(wm8960->mclk)) + clk_disable_unprepare(wm8960->mclk); + /* Enable anti-pop mode */ snd_soc_update_bits(codec, WM8960_APOP1, WM8960_POBCTRL | WM8960_SOFT_ST | @@ -741,7 +967,7 @@ break; case SND_SOC_BIAS_STANDBY: - switch (codec->dapm.bias_level) { + switch (snd_soc_codec_get_bias_level(codec)) { case SND_SOC_BIAS_PREPARE: /* Disable HP discharge */ snd_soc_update_bits(codec, WM8960_APOP2, @@ -765,8 +991,6 @@ break; } - codec->dapm.bias_level = level; - return 0; } @@ -777,6 +1001,28 @@ u32 k:24; }; +static bool is_pll_freq_available(unsigned int source, unsigned int target) +{ + unsigned int Ndiv; + + if (source == 0 || target == 0) + return false; + + /* Scale up target to PLL operating frequency */ + target *= 4; + Ndiv = target / source; + + if (Ndiv < 6) { + source >>= 1; + Ndiv = target / source; + } + + if ((Ndiv < 6) || (Ndiv > 12)) + return false; + + return true; +} + /* The size in bits of the pll divide multiplied by 10 * to allow rounding later */ #define FIXED_PLL_SIZE ((1 << 24) * 10) @@ -828,10 +1074,9 @@ return 0; } -static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, - int source, unsigned int freq_in, unsigned int freq_out) +static int wm8960_set_pll(struct snd_soc_codec *codec, + unsigned int freq_in, unsigned int freq_out) { - struct snd_soc_codec *codec = codec_dai->codec; u16 reg; static struct _pll_div pll_div; int ret; @@ -871,6 +1116,20 @@ return 0; } +static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, + int source, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + wm8960->freq_in = freq_in; + + if (pll_id == WM8960_SYSCLK_AUTO) + return 0; + + return wm8960_set_pll(codec, freq_in, freq_out); +} + static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai, int div_id, int div) { @@ -913,18 +1172,47 @@ return wm8960->set_bias_level(codec, level); } +static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + switch (clk_id) { + case WM8960_SYSCLK_MCLK: + snd_soc_update_bits(codec, WM8960_CLOCK1, + 0x1, WM8960_SYSCLK_MCLK); + break; + case WM8960_SYSCLK_PLL: + snd_soc_update_bits(codec, WM8960_CLOCK1, + 0x1, WM8960_SYSCLK_PLL); + break; + case WM8960_SYSCLK_AUTO: + break; + default: + return -EINVAL; + } + + wm8960->sysclk = freq; + wm8960->clk_id = clk_id; + + return 0; +} + #define WM8960_RATES SNDRV_PCM_RATE_8000_48000 #define WM8960_FORMATS \ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ - SNDRV_PCM_FMTBIT_S24_LE) + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) static const struct snd_soc_dai_ops wm8960_dai_ops = { .hw_params = wm8960_hw_params, + .hw_free = wm8960_hw_free, .digital_mute = wm8960_mute, .set_fmt = wm8960_set_dai_fmt, .set_clkdiv = wm8960_set_dai_clkdiv, .set_pll = wm8960_set_dai_pll, + .set_sysclk = wm8960_set_dai_sysclk, }; static struct snd_soc_dai_driver wm8960_dai = { @@ -945,62 +1233,15 @@ .symmetric_rates = 1, }; -static int wm8960_suspend(struct snd_soc_codec *codec) -{ - struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); - - wm8960->set_bias_level(codec, SND_SOC_BIAS_OFF); - return 0; -} - -static int wm8960_resume(struct snd_soc_codec *codec) -{ - struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); - - wm8960->set_bias_level(codec, SND_SOC_BIAS_STANDBY); - return 0; -} - static int wm8960_probe(struct snd_soc_codec *codec) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); - struct wm8960_data *pdata = dev_get_platdata(codec->dev); - int ret; - - wm8960->set_bias_level = wm8960_set_bias_level_out3; - - if (!pdata) { - dev_warn(codec->dev, "No platform data supplied\n"); - } else { - if (pdata->capless) - wm8960->set_bias_level = wm8960_set_bias_level_capless; - } - - ret = snd_soc_codec_set_cache_io(codec, 7, 9, SND_SOC_REGMAP); - if (ret < 0) { - dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); - return ret; - } - - ret = wm8960_reset(codec); - if (ret < 0) { - dev_err(codec->dev, "Failed to issue reset\n"); - return ret; - } - - wm8960->set_bias_level(codec, SND_SOC_BIAS_STANDBY); + struct wm8960_data *pdata = &wm8960->pdata; - /* Latch the update bits */ - snd_soc_update_bits(codec, WM8960_LINVOL, 0x100, 0x100); - snd_soc_update_bits(codec, WM8960_RINVOL, 0x100, 0x100); - snd_soc_update_bits(codec, WM8960_LADC, 0x100, 0x100); - snd_soc_update_bits(codec, WM8960_RADC, 0x100, 0x100); - snd_soc_update_bits(codec, WM8960_LDAC, 0x100, 0x100); - snd_soc_update_bits(codec, WM8960_RDAC, 0x100, 0x100); - snd_soc_update_bits(codec, WM8960_LOUT1, 0x100, 0x100); - snd_soc_update_bits(codec, WM8960_ROUT1, 0x100, 0x100); - snd_soc_update_bits(codec, WM8960_LOUT2, 0x100, 0x100); - snd_soc_update_bits(codec, WM8960_ROUT2, 0x100, 0x100); + if (pdata->capless) + wm8960->set_bias_level = wm8960_set_bias_level_capless; + else + wm8960->set_bias_level = wm8960_set_bias_level_out3; snd_soc_add_codec_controls(codec, wm8960_snd_controls, ARRAY_SIZE(wm8960_snd_controls)); @@ -1009,21 +1250,10 @@ return 0; } -/* power down chip */ -static int wm8960_remove(struct snd_soc_codec *codec) -{ - struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); - - wm8960->set_bias_level(codec, SND_SOC_BIAS_OFF); - return 0; -} - static struct snd_soc_codec_driver soc_codec_dev_wm8960 = { .probe = wm8960_probe, - .remove = wm8960_remove, - .suspend = wm8960_suspend, - .resume = wm8960_resume, .set_bias_level = wm8960_set_bias_level, + .suspend_bias_off = true, }; static const struct regmap_config wm8960_regmap = { @@ -1038,6 +1268,18 @@ .volatile_reg = wm8960_volatile, }; +static void wm8960_set_pdata_from_of(struct i2c_client *i2c, + struct wm8960_data *pdata) +{ + const struct device_node *np = i2c->dev.of_node; + + if (of_property_read_bool(np, "wlf,capless")) + pdata->capless = true; + + if (of_property_read_bool(np, "wlf,shared-lrclk")) + pdata->shared_lrclk = true; +} + static int wm8960_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -1050,11 +1292,28 @@ if (wm8960 == NULL) return -ENOMEM; + wm8960->mclk = devm_clk_get(&i2c->dev, "mclk"); + if (IS_ERR(wm8960->mclk)) { + if (PTR_ERR(wm8960->mclk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } + wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap); if (IS_ERR(wm8960->regmap)) return PTR_ERR(wm8960->regmap); - if (pdata && pdata->shared_lrclk) { + if (pdata) + memcpy(&wm8960->pdata, pdata, sizeof(struct wm8960_data)); + else if (i2c->dev.of_node) + wm8960_set_pdata_from_of(i2c, &wm8960->pdata); + + ret = wm8960_reset(wm8960->regmap); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to issue reset\n"); + return ret; + } + + if (wm8960->pdata.shared_lrclk) { ret = regmap_update_bits(wm8960->regmap, WM8960_ADDCTL2, 0x4, 0x4); if (ret != 0) { @@ -1064,6 +1323,18 @@ } } + /* Latch the update bits */ + regmap_update_bits(wm8960->regmap, WM8960_LINVOL, 0x100, 0x100); + regmap_update_bits(wm8960->regmap, WM8960_RINVOL, 0x100, 0x100); + regmap_update_bits(wm8960->regmap, WM8960_LADC, 0x100, 0x100); + regmap_update_bits(wm8960->regmap, WM8960_RADC, 0x100, 0x100); + regmap_update_bits(wm8960->regmap, WM8960_LDAC, 0x100, 0x100); + regmap_update_bits(wm8960->regmap, WM8960_RDAC, 0x100, 0x100); + regmap_update_bits(wm8960->regmap, WM8960_LOUT1, 0x100, 0x100); + regmap_update_bits(wm8960->regmap, WM8960_ROUT1, 0x100, 0x100); + regmap_update_bits(wm8960->regmap, WM8960_LOUT2, 0x100, 0x100); + regmap_update_bits(wm8960->regmap, WM8960_ROUT2, 0x100, 0x100); + i2c_set_clientdata(i2c, wm8960); ret = snd_soc_register_codec(&i2c->dev, @@ -1084,10 +1355,16 @@ }; MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id); +static const struct of_device_id wm8960_of_match[] = { + { .compatible = "wlf,wm8960", }, + { } +}; +MODULE_DEVICE_TABLE(of, wm8960_of_match); + static struct i2c_driver wm8960_i2c_driver = { .driver = { .name = "wm8960", - .owner = THIS_MODULE, + .of_match_table = wm8960_of_match, }, .probe = wm8960_i2c_probe, .remove = wm8960_i2c_remove,