--- zzzz-none-000/linux-3.10.107/sound/soc/omap/omap-mcbsp.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/sound/soc/omap/omap-mcbsp.c	2021-02-04 17:41:59.000000000 +0000
@@ -34,6 +34,7 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 #include <sound/dmaengine_pcm.h>
+#include <sound/omap-pcm.h>
 
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include "mcbsp.h"
@@ -149,9 +150,6 @@
 					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 2);
 	}
 
-	snd_soc_dai_set_dma_data(cpu_dai, substream,
-				 &mcbsp->dma_data[substream->stream]);
-
 	return err;
 }
 
@@ -433,6 +431,11 @@
 		/* Sample rate generator drives the FS */
 		regs->srgr2	|= FSGM;
 		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		/* McBSP slave. FS clock as output */
+		regs->srgr2	|= FSGM;
+		regs->pcr0	|= FSXM | FSRM;
+		break;
 	case SND_SOC_DAIFMT_CBM_CFM:
 		/* McBSP slave */
 		break;
@@ -527,8 +530,19 @@
 
 	case OMAP_MCBSP_SYSCLK_CLKX_EXT:
 		regs->srgr2	|= CLKSM;
+		regs->pcr0	|= SCLKME;
+		/*
+		 * If McBSP is master but yet the CLKX/CLKR pin drives the SRG,
+		 * disable output on those pins. This enables to inject the
+		 * reference clock through CLKX/CLKR. For this to work
+		 * set_dai_sysclk() _needs_ to be called after set_dai_fmt().
+		 */
+		regs->pcr0	&= ~CLKXM;
+		break;
 	case OMAP_MCBSP_SYSCLK_CLKR_EXT:
 		regs->pcr0	|= SCLKME;
+		/* Disable ouput on CLKR pin in master mode */
+		regs->pcr0	&= ~CLKRM;
 		break;
 	default:
 		err = -ENODEV;
@@ -554,6 +568,10 @@
 
 	pm_runtime_enable(mcbsp->dev);
 
+	snd_soc_dai_init_dma_data(dai,
+				  &mcbsp->dma_data[SNDRV_PCM_STREAM_PLAYBACK],
+				  &mcbsp->dma_data[SNDRV_PCM_STREAM_CAPTURE]);
+
 	return 0;
 }
 
@@ -686,7 +704,7 @@
 OMAP_MCBSP_ST_CONTROLS(2);
 OMAP_MCBSP_ST_CONTROLS(3);
 
-int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd)
+int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd, int port_id)
 {
 	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
@@ -696,7 +714,7 @@
 		return 0;
 	}
 
-	switch (mcbsp->id) {
+	switch (port_id) {
 	case 2: /* McBSP 2 */
 		return snd_soc_add_dai_controls(cpu_dai,
 					omap_mcbsp2_st_controls,
@@ -706,6 +724,7 @@
 					omap_mcbsp3_st_controls,
 					ARRAY_SIZE(omap_mcbsp3_st_controls));
 	default:
+		dev_err(mcbsp->dev, "Port %d not supported\n", port_id);
 		break;
 	}
 
@@ -794,19 +813,22 @@
 	platform_set_drvdata(pdev, mcbsp);
 
 	ret = omap_mcbsp_init(pdev);
-	if (!ret)
-		return snd_soc_register_component(&pdev->dev, &omap_mcbsp_component,
-						  &omap_mcbsp_dai, 1);
+	if (ret)
+		return ret;
+
+	ret = devm_snd_soc_register_component(&pdev->dev,
+					      &omap_mcbsp_component,
+					      &omap_mcbsp_dai, 1);
+	if (ret)
+		return ret;
 
-	return ret;
+	return omap_pcm_platform_register(&pdev->dev);
 }
 
 static int asoc_mcbsp_remove(struct platform_device *pdev)
 {
 	struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
 
-	snd_soc_unregister_component(&pdev->dev);
-
 	if (mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(mcbsp->id);
 
@@ -814,15 +836,12 @@
 
 	clk_put(mcbsp->fclk);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 
 static struct platform_driver asoc_mcbsp_driver = {
 	.driver = {
 			.name = "omap-mcbsp",
-			.owner = THIS_MODULE,
 			.of_match_table = omap_mcbsp_of_match,
 	},