--- zzzz-none-000/linux-3.10.107/sound/soc/samsung/Kconfig 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/sound/soc/samsung/Kconfig 2021-02-04 17:41:59.000000000 +0000 @@ -1,8 +1,9 @@ config SND_SOC_SAMSUNG tristate "ASoC support for Samsung" - depends on PLAT_SAMSUNG - select S3C64XX_DMA if ARCH_S3C64XX - select S3C2410_DMA if ARCH_S3C24XX + depends on (PLAT_SAMSUNG || ARCH_EXYNOS) + depends on S3C64XX_PL080 || !ARCH_S3C64XX + depends on S3C24XX_DMAC || !ARCH_S3C24XX + select SND_SOC_GENERIC_DMAENGINE_PCM help Say Y or M if you want to add support for codecs attached to the Samsung SoCs' Audio interfaces. You will also need to @@ -10,7 +11,6 @@ config SND_S3C24XX_I2S tristate - select S3C2410_DMA config SND_S3C_I2SV2_SOC tristate @@ -18,7 +18,6 @@ config SND_S3C2412_SOC_I2S tristate select SND_S3C_I2SV2_SOC - select S3C2410_DMA config SND_SAMSUNG_PCM tristate @@ -39,22 +38,23 @@ depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02 select SND_S3C24XX_I2S select SND_SOC_WM8753 - select SND_SOC_DFBMCS320 + select SND_SOC_BT_SCO help Say Y here to enable audio support for the Openmoko Neo1973 Smartphones. config SND_SOC_SAMSUNG_JIVE_WM8750 tristate "SoC I2S Audio support for Jive" - depends on SND_SOC_SAMSUNG && MACH_JIVE + depends on SND_SOC_SAMSUNG && MACH_JIVE && I2C select SND_SOC_WM8750 select SND_S3C2412_SOC_I2S help - Sat Y if you want to add support for SoC audio on the Jive. + Say Y if you want to add support for SoC audio on the Jive. config SND_SOC_SAMSUNG_SMDK_WM8580 tristate "SoC I2S Audio support for WM8580 on SMDK" - depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDKV210 || MACH_SMDKC110) + depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110) + depends on I2C select SND_SOC_WM8580 select SND_SAMSUNG_I2S help @@ -63,7 +63,7 @@ config SND_SOC_SAMSUNG_SMDK_WM8994 tristate "SoC I2S Audio support for WM8994 on SMDK" depends on SND_SOC_SAMSUNG - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_WM8994 select SND_SOC_WM8994 select SND_SAMSUNG_I2S @@ -73,7 +73,6 @@ config SND_SOC_SAMSUNG_SMDK2443_WM9710 tristate "SoC AC97 Audio support for SMDK2443 - WM9710" depends on SND_SOC_SAMSUNG && MACH_SMDK2443 - select S3C2410_DMA select AC97_BUS select SND_SOC_AC97_CODEC select SND_SAMSUNG_AC97 @@ -84,7 +83,6 @@ config SND_SOC_SAMSUNG_LN2440SBC_ALC650 tristate "SoC AC97 Audio support for LN2440SBC - ALC650" depends on SND_SOC_SAMSUNG && ARCH_S3C24XX - select S3C2410_DMA select AC97_BUS select SND_SOC_AC97_CODEC select SND_SAMSUNG_AC97 @@ -106,21 +104,21 @@ config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23 tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" - depends on SND_SOC_SAMSUNG && ARCH_S3C24XX + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C select SND_S3C24XX_I2S - select SND_SOC_TLV320AIC23 + select SND_SOC_TLV320AIC23_I2C select SND_SOC_SAMSUNG_SIMTEC config SND_SOC_SAMSUNG_SIMTEC_HERMES tristate "SoC I2S Audio support for Simtec Hermes board" - depends on SND_SOC_SAMSUNG && ARCH_S3C24XX + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C select SND_S3C24XX_I2S select SND_SOC_TLV320AIC3X select SND_SOC_SAMSUNG_SIMTEC config SND_SOC_SAMSUNG_H1940_UDA1380 tristate "Audio support for the HP iPAQ H1940" - depends on SND_SOC_SAMSUNG && ARCH_H1940 + depends on SND_SOC_SAMSUNG && ARCH_H1940 && I2C select SND_S3C24XX_I2S select SND_SOC_UDA1380 help @@ -128,7 +126,7 @@ config SND_SOC_SAMSUNG_RX1950_UDA1380 tristate "Audio support for the HP iPAQ RX1950" - depends on SND_SOC_SAMSUNG && MACH_RX1950 + depends on SND_SOC_SAMSUNG && MACH_RX1950 && I2C select SND_S3C24XX_I2S select SND_SOC_UDA1380 help @@ -136,29 +134,18 @@ config SND_SOC_SAMSUNG_SMDK_WM9713 tristate "SoC AC97 Audio support for SMDK with WM9713" - depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210) + depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110) select SND_SOC_WM9713 select SND_SAMSUNG_AC97 help - Sat Y if you want to add support for SoC audio on the SMDK. + Say Y if you want to add support for SoC audio on the SMDK. config SND_SOC_SMARTQ tristate "SoC I2S Audio support for SmartQ board" - depends on SND_SOC_SAMSUNG && MACH_SMARTQ + depends on SND_SOC_SAMSUNG && MACH_SMARTQ && I2C select SND_SAMSUNG_I2S select SND_SOC_WM8750 -config SND_SOC_GONI_AQUILA_WM8994 - tristate "SoC I2S Audio support for AQUILA/GONI - WM8994" - depends on SND_SOC_SAMSUNG && (MACH_GONI || MACH_AQUILA) - depends on I2C=y && GENERIC_HARDIRQS - select SND_SAMSUNG_I2S - select MFD_WM8994 - select SND_SOC_WM8994 - help - Say Y if you want to add support for SoC audio on goni or aquila - with the WM8994. - config SND_SOC_SAMSUNG_SMDK_SPDIF tristate "SoC S/PDIF Audio support for SMDK" depends on SND_SOC_SAMSUNG @@ -168,7 +155,8 @@ config SND_SOC_SMDK_WM8580_PCM tristate "SoC PCM Audio support for WM8580 on SMDK" - depends on SND_SOC_SAMSUNG && (MACH_SMDK6450 || MACH_SMDKV210 || MACH_SMDKC110) + depends on SND_SOC_SAMSUNG && (MACH_SMDKV210 || MACH_SMDKC110) + depends on I2C select SND_SOC_WM8580 select SND_SAMSUNG_PCM help @@ -177,7 +165,7 @@ config SND_SOC_SMDK_WM8994_PCM tristate "SoC PCM Audio support for WM8994 on SMDK" depends on SND_SOC_SAMSUNG - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_WM8994 select SND_SOC_WM8994 select SND_SAMSUNG_PCM @@ -186,7 +174,8 @@ config SND_SOC_SPEYSIDE tristate "Audio support for Wolfson Speyside" - depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 + depends on SND_SOC_SAMSUNG && I2C && SPI_MASTER + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST select SND_SAMSUNG_I2S select SND_SOC_WM8996 select SND_SOC_WM9081 @@ -195,13 +184,15 @@ config SND_SOC_TOBERMORY tristate "Audio support for Wolfson Tobermory" - depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 + depends on SND_SOC_SAMSUNG && INPUT && I2C + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST select SND_SAMSUNG_I2S select SND_SOC_WM8962 config SND_SOC_BELLS tristate "Audio support for Wolfson Bells" - depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 + depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST select SND_SAMSUNG_I2S select SND_SOC_WM5102 select SND_SOC_WM5110 @@ -211,14 +202,40 @@ config SND_SOC_LOWLAND tristate "Audio support for Wolfson Lowland" - depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 + depends on SND_SOC_SAMSUNG && I2C + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST select SND_SAMSUNG_I2S select SND_SOC_WM5100 select SND_SOC_WM9081 config SND_SOC_LITTLEMILL tristate "Audio support for Wolfson Littlemill" - depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 + depends on SND_SOC_SAMSUNG && I2C + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST select SND_SAMSUNG_I2S select MFD_WM8994 select SND_SOC_WM8994 + +config SND_SOC_SNOW + tristate "Audio support for Google Snow boards" + depends on SND_SOC_SAMSUNG && I2C + select SND_SOC_MAX98090 + select SND_SOC_MAX98095 + select SND_SAMSUNG_I2S + help + Say Y if you want to add audio support for various Snow + boards based on Exynos5 series of SoCs. + +config SND_SOC_ODROIDX2 + tristate "Audio support for Odroid-X2 and Odroid-U3" + depends on SND_SOC_SAMSUNG && I2C + select SND_SOC_MAX98090 + select SND_SAMSUNG_I2S + help + Say Y here to enable audio support for the Odroid-X2/U3. + +config SND_SOC_ARNDALE_RT5631_ALC5631 + tristate "Audio support for RT5631(ALC5631) on Arndale Board" + depends on SND_SOC_SAMSUNG && I2C + select SND_SAMSUNG_I2S + select SND_SOC_RT5631