--- zzzz-none-000/linux-4.4.60/include/net/cfg80211.h	2017-04-08 07:53:53.000000000 +0000
+++ scorpion-7490-727/linux-4.4.60/include/net/cfg80211.h	2021-02-04 17:41:59.000000000 +0000
@@ -402,6 +402,22 @@
 };
 
 /**
+ * struct cfg80211_fils_aad - FILS AAD data
+ * @macaddr: STA MAC address
+ * @kek: FILS KEK
+ * @kek_len: FILS KEK length
+ * @snonce: STA Nonce
+ * @anonce: AP Nonce
+ */
+struct cfg80211_fils_aad {
+	const u8 *macaddr;
+	const u8 *kek;
+	u8 kek_len;
+	const u8 *snonce;
+	const u8 *anonce;
+};
+
+/**
  * cfg80211_get_chandef_type - return old channel type from chandef
  * @chandef: the channel definition
  *
@@ -712,6 +728,8 @@
  * @p2p_opp_ps: P2P opportunistic PS
  * @acl: ACL configuration used by the drivers which has support for
  *	MAC address based access control
+ * @pbss: If set, start as a PCP instead of AP. Relevant for DMG
+ *	networks.
  */
 struct cfg80211_ap_settings {
 	struct cfg80211_chan_def chandef;
@@ -730,6 +748,7 @@
 	u8 p2p_ctwindow;
 	bool p2p_opp_ps;
 	const struct cfg80211_acl_data *acl;
+	bool pbss;
 };
 
 /**
@@ -1723,11 +1742,16 @@
  * @ASSOC_REQ_DISABLE_HT:  Disable HT (802.11n)
  * @ASSOC_REQ_DISABLE_VHT:  Disable VHT
  * @ASSOC_REQ_USE_RRM: Declare RRM capability in this association
+ * @CONNECT_REQ_EXTERNAL_AUTH_SUPPORT: User space indicates external
+ *	authentication capability. Drivers can offload authentication to
+ *	userspace if this flag is set. Only applicable for cfg80211_connect()
+ *	request (connect callback).
  */
 enum cfg80211_assoc_req_flags {
-	ASSOC_REQ_DISABLE_HT		= BIT(0),
-	ASSOC_REQ_DISABLE_VHT		= BIT(1),
-	ASSOC_REQ_USE_RRM		= BIT(2),
+	ASSOC_REQ_DISABLE_HT			= BIT(0),
+	ASSOC_REQ_DISABLE_VHT			= BIT(1),
+	ASSOC_REQ_USE_RRM			= BIT(2),
+	CONNECT_REQ_EXTERNAL_AUTH_SUPPORT	= BIT(3),
 };
 
 /**
@@ -1888,6 +1912,8 @@
  * @ht_capa_mask:  The bits of ht_capa which are to be used.
  * @vht_capa:  VHT Capability overrides
  * @vht_capa_mask: The bits of vht_capa which are to be used.
+ * @pbss: if set, connect to a PCP instead of AP. Valid for DMG
+ *	networks.
  */
 struct cfg80211_connect_params {
 	struct ieee80211_channel *channel;
@@ -1910,6 +1936,7 @@
 	struct ieee80211_ht_cap ht_capa_mask;
 	struct ieee80211_vht_cap vht_capa;
 	struct ieee80211_vht_cap vht_capa_mask;
+	bool pbss;
 };
 
 /**
@@ -2222,6 +2249,33 @@
 };
 
 /**
+ * struct cfg80211_external_auth_params - Trigger External authentication.
+ *
+ * Commonly used across the external auth request and event interfaces.
+ *
+ * @action: action type / trigger for external authentication. Only significant
+ *	for the authentication request event interface (driver to user space).
+ * @bssid: BSSID of the peer with which the authentication has
+ *	to happen. Used by both the authentication request event and
+ *	authentication response command interface.
+ * @ssid: SSID of the AP.  Used by both the authentication request event and
+ *	authentication response command interface.
+ * @key_mgmt_suite: AKM suite of the respective authentication. Used by the
+ *	authentication request event interface.
+ * @status: status code, %WLAN_STATUS_SUCCESS for successful authentication,
+ *	use %WLAN_STATUS_UNSPECIFIED_FAILURE if user space cannot give you
+ *	the real status code for failures. Used only for the authentication
+ *	response command interface (user space to driver).
+ */
+struct cfg80211_external_auth_params {
+	enum nl80211_external_auth_action action;
+	u8 bssid[ETH_ALEN] __aligned(2);
+	struct cfg80211_ssid ssid;
+	unsigned int key_mgmt_suite;
+	u16 status;
+};
+
+/**
  * struct cfg80211_ops - backend description for wireless configuration
  *
  * This struct is registered by fullmac card drivers and/or wireless stacks
@@ -2321,6 +2375,8 @@
  *	the driver, and will be valid until passed to cfg80211_scan_done().
  *	For scan results, call cfg80211_inform_bss(); you can call this outside
  *	the scan/scan_done bracket too.
+ * @abort_scan: Tell the driver to abort an ongoing scan. The driver shall
+ *	indicate the status of the scan through cfg80211_scan_done().
  *
  * @auth: Request to authenticate with the specified peer
  *	(invoked with the wireless_dev mutex held)
@@ -2492,6 +2548,11 @@
  *	and returning to the base channel for communication with the AP.
  * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both
  *	peers must be on the base channel when the call completes.
+ *
+ * @external_auth: indicates result of offloaded authentication processing from
+ *     user space
+ * @set_fils_aad: Set FILS AAD data to driver so that driver can use those to
+ *      encrypt/decrypt (Re)Association Request/Response frame.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2593,6 +2654,7 @@
 
 	int	(*scan)(struct wiphy *wiphy,
 			struct cfg80211_scan_request *request);
+	void	(*abort_scan)(struct wiphy *wiphy, struct wireless_dev *wdev);
 
 	int	(*auth)(struct wiphy *wiphy, struct net_device *dev,
 			struct cfg80211_auth_request *req);
@@ -2756,6 +2818,11 @@
 	void	(*tdls_cancel_channel_switch)(struct wiphy *wiphy,
 					      struct net_device *dev,
 					      const u8 *addr);
+	int     (*external_auth)(struct wiphy *wiphy, struct net_device *dev,
+				 struct cfg80211_external_auth_params *params);
+
+	int	(*set_fils_aad)(struct wiphy *wiphy, struct net_device *dev,
+				struct cfg80211_fils_aad *fils_aad);
 };
 
 /*
@@ -3486,6 +3553,10 @@
  *	registered for unexpected class 3 frames (AP mode)
  * @conn: (private) cfg80211 software SME connection state machine data
  * @connect_keys: (private) keys to set after connection is established
+ * @conn_bss_type: connecting/connected BSS type
+ * @conn_owner_nlportid: (private) connection owner socket port ID
+ * @disconnect_wk: (private) auto-disconnect work
+ * @disconnect_bssid: (private) the BSSID to use for auto-disconnect
  * @ibss_fixed: (private) IBSS is using fixed BSSID
  * @ibss_dfs_possible: (private) IBSS may change to a DFS channel
  * @event_list: (private) list for internal event processing
@@ -3516,6 +3587,11 @@
 	u8 ssid_len, mesh_id_len, mesh_id_up_len;
 	struct cfg80211_conn *conn;
 	struct cfg80211_cached_keys *connect_keys;
+	enum ieee80211_bss_type conn_bss_type;
+	u32 conn_owner_nlportid;
+
+	struct work_struct disconnect_wk;
+	u8 disconnect_bssid[ETH_ALEN];
 
 	struct list_head event_list;
 	spinlock_t event_lock;
@@ -5314,6 +5390,9 @@
 {
 	u8 *ft_byte;
 
+	if (ftidx >= NUM_NL80211_EXT_FEATURES)
+		return;
+
 	ft_byte = &wiphy->ext_features[ftidx / 8];
 	*ft_byte |= BIT(ftidx % 8);
 }
@@ -5333,6 +5412,9 @@
 {
 	u8 ft_byte;
 
+	if (ftidx >= NUM_NL80211_EXT_FEATURES)
+		return false;
+
 	ft_byte = wiphy->ext_features[ftidx / 8];
 	return (ft_byte & BIT(ftidx % 8)) != 0;
 }
@@ -5340,6 +5422,17 @@
 /* ethtool helper */
 void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info);
 
+/**
+ * cfg80211_external_auth_request - userspace request for authentication
+ * @netdev: network device
+ * @params: External authentication parameters
+ * @gfp: allocation flags
+ * Returns: 0 on success, < 0 on error
+ */
+int cfg80211_external_auth_request(struct net_device *netdev,
+				   struct cfg80211_external_auth_params *params,
+				   gfp_t gfp);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */