/* * Samsung SATA SerDes(PHY) driver * * Copyright (C) 2013 Samsung Electronics Co., Ltd. * Authors: Girish K S * Yuvaraj Kumar C D * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #define SATAPHY_CONTROL_OFFSET 0x0724 #define EXYNOS5_SATAPHY_PMU_ENABLE BIT(0) #define EXYNOS5_SATA_RESET 0x4 #define RESET_GLOBAL_RST_N BIT(0) #define RESET_CMN_RST_N BIT(1) #define RESET_CMN_BLOCK_RST_N BIT(2) #define RESET_CMN_I2C_RST_N BIT(3) #define RESET_TX_RX_PIPE_RST_N BIT(4) #define RESET_TX_RX_BLOCK_RST_N BIT(5) #define RESET_TX_RX_I2C_RST_N (BIT(6) | BIT(7)) #define LINK_RESET 0xf0000 #define EXYNOS5_SATA_MODE0 0x10 #define SATA_SPD_GEN3 BIT(1) #define EXYNOS5_SATA_CTRL0 0x14 #define CTRL0_P0_PHY_CALIBRATED_SEL BIT(9) #define CTRL0_P0_PHY_CALIBRATED BIT(8) #define EXYNOS5_SATA_PHSATA_CTRLM 0xe0 #define PHCTRLM_REF_RATE BIT(1) #define PHCTRLM_HIGH_SPEED BIT(0) #define EXYNOS5_SATA_PHSATA_STATM 0xf0 #define PHSTATM_PLL_LOCKED BIT(0) #define PHY_PLL_TIMEOUT (usecs_to_jiffies(1000)) struct exynos_sata_phy { struct phy *phy; struct clk *phyclk; void __iomem *regs; struct regmap *pmureg; struct i2c_client *client; }; static int wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit, u32 status) { unsigned long timeout = jiffies + PHY_PLL_TIMEOUT; while (time_before(jiffies, timeout)) { if ((readl(base + reg) & checkbit) == status) return 0; } return -EFAULT; } static int exynos_sata_phy_power_on(struct phy *phy) { struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, EXYNOS5_SATAPHY_PMU_ENABLE, true); } static int exynos_sata_phy_power_off(struct phy *phy) { struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, EXYNOS5_SATAPHY_PMU_ENABLE, false); } static int exynos_sata_phy_init(struct phy *phy) { u32 val = 0; int ret = 0; u8 buf[] = { 0x3a, 0x0b }; struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); ret = regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, EXYNOS5_SATAPHY_PMU_ENABLE, true); if (ret != 0) dev_err(&sata_phy->phy->dev, "phy init failed\n"); writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); val |= RESET_GLOBAL_RST_N | RESET_CMN_RST_N | RESET_CMN_BLOCK_RST_N | RESET_CMN_I2C_RST_N | RESET_TX_RX_PIPE_RST_N | RESET_TX_RX_BLOCK_RST_N | RESET_TX_RX_I2C_RST_N; writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); val |= LINK_RESET; writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); val |= RESET_CMN_RST_N; writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); val &= ~PHCTRLM_REF_RATE; writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); /* High speed enable for Gen3 */ val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); val |= PHCTRLM_HIGH_SPEED; writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); val = readl(sata_phy->regs + EXYNOS5_SATA_CTRL0); val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED; writel(val, sata_phy->regs + EXYNOS5_SATA_CTRL0); val = readl(sata_phy->regs + EXYNOS5_SATA_MODE0); val |= SATA_SPD_GEN3; writel(val, sata_phy->regs + EXYNOS5_SATA_MODE0); ret = i2c_master_send(sata_phy->client, buf, sizeof(buf)); if (ret < 0) return ret; /* release cmu reset */ val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); val &= ~RESET_CMN_RST_N; writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); val |= RESET_CMN_RST_N; writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); ret = wait_for_reg_status(sata_phy->regs, EXYNOS5_SATA_PHSATA_STATM, PHSTATM_PLL_LOCKED, 1); if (ret < 0) dev_err(&sata_phy->phy->dev, "PHY PLL locking failed\n"); return ret; } static const struct phy_ops exynos_sata_phy_ops = { .init = exynos_sata_phy_init, .power_on = exynos_sata_phy_power_on, .power_off = exynos_sata_phy_power_off, .owner = THIS_MODULE, }; static int exynos_sata_phy_probe(struct platform_device *pdev) { struct exynos_sata_phy *sata_phy; struct device *dev = &pdev->dev; struct resource *res; struct phy_provider *phy_provider; struct device_node *node; int ret = 0; sata_phy = devm_kzalloc(dev, sizeof(*sata_phy), GFP_KERNEL); if (!sata_phy) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); sata_phy->regs = devm_ioremap_resource(dev, res); if (IS_ERR(sata_phy->regs)) return PTR_ERR(sata_phy->regs); sata_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, "samsung,syscon-phandle"); if (IS_ERR(sata_phy->pmureg)) { dev_err(dev, "syscon regmap lookup failed.\n"); return PTR_ERR(sata_phy->pmureg); } node = of_parse_phandle(dev->of_node, "samsung,exynos-sataphy-i2c-phandle", 0); if (!node) return -EINVAL; sata_phy->client = of_find_i2c_device_by_node(node); of_node_put(node); if (!sata_phy->client) return -EPROBE_DEFER; dev_set_drvdata(dev, sata_phy); sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl"); if (IS_ERR(sata_phy->phyclk)) { dev_err(dev, "failed to get clk for PHY\n"); ret = PTR_ERR(sata_phy->phyclk); goto put_dev; } ret = clk_prepare_enable(sata_phy->phyclk); if (ret < 0) { dev_err(dev, "failed to enable source clk\n"); goto put_dev; } sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops); if (IS_ERR(sata_phy->phy)) { dev_err(dev, "failed to create PHY\n"); ret = PTR_ERR(sata_phy->phy); goto clk_disable; } phy_set_drvdata(sata_phy->phy, sata_phy); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) { ret = PTR_ERR(phy_provider); goto clk_disable; } return 0; clk_disable: clk_disable_unprepare(sata_phy->phyclk); put_dev: put_device(&sata_phy->client->dev); return ret; } static const struct of_device_id exynos_sata_phy_of_match[] = { { .compatible = "samsung,exynos5250-sata-phy" }, { }, }; MODULE_DEVICE_TABLE(of, exynos_sata_phy_of_match); static struct platform_driver exynos_sata_phy_driver = { .probe = exynos_sata_phy_probe, .driver = { .of_match_table = exynos_sata_phy_of_match, .name = "samsung,sata-phy", } }; module_platform_driver(exynos_sata_phy_driver); MODULE_DESCRIPTION("Samsung SerDes PHY driver"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Girish K S "); MODULE_AUTHOR("Yuvaraj C D ");