/* * SCSI Enclosure Services * * Copyright (C) 2008 James Bottomley * **----------------------------------------------------------------------------- ** ** This program is free software; you can redistribute it and/or ** modify it under the terms of the GNU General Public License ** version 2 as published by the Free Software Foundation. ** ** This program is distributed in the hope that it will be useful, ** but WITHOUT ANY WARRANTY; without even the implied warranty of ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ** GNU General Public License for more details. ** ** You should have received a copy of the GNU General Public License ** along with this program; if not, write to the Free Software ** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ** **----------------------------------------------------------------------------- */ #include #include #include #include #include #include #include #include #include #include #include #include struct ses_device { unsigned char *page1; unsigned char *page1_types; unsigned char *page2; unsigned char *page10; short page1_len; short page1_num_types; short page2_len; short page10_len; }; struct ses_component { u64 addr; }; static int ses_probe(struct device *dev) { struct scsi_device *sdev = to_scsi_device(dev); int err = -ENODEV; if (sdev->type != TYPE_ENCLOSURE) goto out; err = 0; sdev_printk(KERN_NOTICE, sdev, "Attached Enclosure device\n"); out: return err; } #define SES_TIMEOUT (30 * HZ) #define SES_RETRIES 3 static void init_device_slot_control(unsigned char *dest_desc, struct enclosure_component *ecomp, unsigned char *status) { memcpy(dest_desc, status, 4); dest_desc[0] = 0; /* only clear byte 1 for ENCLOSURE_COMPONENT_DEVICE */ if (ecomp->type == ENCLOSURE_COMPONENT_DEVICE) dest_desc[1] = 0; dest_desc[2] &= 0xde; dest_desc[3] &= 0x3c; } static int ses_recv_diag(struct scsi_device *sdev, int page_code, void *buf, int bufflen) { int ret; unsigned char cmd[] = { RECEIVE_DIAGNOSTIC, 1, /* Set PCV bit */ page_code, bufflen >> 8, bufflen & 0xff, 0 }; unsigned char recv_page_code; ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (unlikely(!ret)) return ret; recv_page_code = ((unsigned char *)buf)[0]; if (likely(recv_page_code == page_code)) return ret; /* successful diagnostic but wrong page code. This happens to some * USB devices, just print a message and pretend there was an error */ sdev_printk(KERN_ERR, sdev, "Wrong diagnostic page; asked for %d got %u\n", page_code, recv_page_code); return -EINVAL; } static int ses_send_diag(struct scsi_device *sdev, int page_code, void *buf, int bufflen) { int result; unsigned char cmd[] = { SEND_DIAGNOSTIC, 0x10, /* Set PF bit */ 0, bufflen >> 8, bufflen & 0xff, 0 }; result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (result) sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n", result); return result; } static int ses_set_page2_descriptor(struct enclosure_device *edev, struct enclosure_component *ecomp, unsigned char *desc) { int i, j, count = 0, descriptor = ecomp->number; struct scsi_device *sdev = to_scsi_device(edev->edev.parent); struct ses_device *ses_dev = edev->scratch; unsigned char *type_ptr = ses_dev->page1_types; unsigned char *desc_ptr = ses_dev->page2 + 8; /* Clear everything */ memset(desc_ptr, 0, ses_dev->page2_len - 8); for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) { for (j = 0; j < type_ptr[1]; j++) { desc_ptr += 4; if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE && type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE) continue; if (count++ == descriptor) { memcpy(desc_ptr, desc, 4); /* set select */ desc_ptr[0] |= 0x80; /* clear reserved, just in case */ desc_ptr[0] &= 0xf0; } } } return ses_send_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len); } static unsigned char *ses_get_page2_descriptor(struct enclosure_device *edev, struct enclosure_component *ecomp) { int i, j, count = 0, descriptor = ecomp->number; struct scsi_device *sdev = to_scsi_device(edev->edev.parent); struct ses_device *ses_dev = edev->scratch; unsigned char *type_ptr = ses_dev->page1_types; unsigned char *desc_ptr = ses_dev->page2 + 8; ses_recv_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len); for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) { for (j = 0; j < type_ptr[1]; j++) { desc_ptr += 4; if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE && type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE) continue; if (count++ == descriptor) return desc_ptr; } } return NULL; } /* For device slot and array device slot elements, byte 3 bit 6 * is "fault sensed" while byte 3 bit 5 is "fault reqstd". As this * code stands these bits are shifted 4 positions right so in * sysfs they will appear as bits 2 and 1 respectively. Strange. */ static void ses_get_fault(struct enclosure_device *edev, struct enclosure_component *ecomp) { unsigned char *desc; desc = ses_get_page2_descriptor(edev, ecomp); if (desc) ecomp->fault = (desc[3] & 0x60) >> 4; } static int ses_set_fault(struct enclosure_device *edev, struct enclosure_component *ecomp, enum enclosure_component_setting val) { unsigned char desc[4]; unsigned char *desc_ptr; desc_ptr = ses_get_page2_descriptor(edev, ecomp); if (!desc_ptr) return -EIO; init_device_slot_control(desc, ecomp, desc_ptr); switch (val) { case ENCLOSURE_SETTING_DISABLED: desc[3] &= 0xdf; break; case ENCLOSURE_SETTING_ENABLED: desc[3] |= 0x20; break; default: /* SES doesn't do the SGPIO blink settings */ return -EINVAL; } return ses_set_page2_descriptor(edev, ecomp, desc); } static void ses_get_status(struct enclosure_device *edev, struct enclosure_component *ecomp) { unsigned char *desc; desc = ses_get_page2_descriptor(edev, ecomp); if (desc) ecomp->status = (desc[0] & 0x0f); } static void ses_get_locate(struct enclosure_device *edev, struct enclosure_component *ecomp) { unsigned char *desc; desc = ses_get_page2_descriptor(edev, ecomp); if (desc) ecomp->locate = (desc[2] & 0x02) ? 1 : 0; } static int ses_set_locate(struct enclosure_device *edev, struct enclosure_component *ecomp, enum enclosure_component_setting val) { unsigned char desc[4]; unsigned char *desc_ptr; desc_ptr = ses_get_page2_descriptor(edev, ecomp); if (!desc_ptr) return -EIO; init_device_slot_control(desc, ecomp, desc_ptr); switch (val) { case ENCLOSURE_SETTING_DISABLED: desc[2] &= 0xfd; break; case ENCLOSURE_SETTING_ENABLED: desc[2] |= 0x02; break; default: /* SES doesn't do the SGPIO blink settings */ return -EINVAL; } return ses_set_page2_descriptor(edev, ecomp, desc); } static int ses_set_active(struct enclosure_device *edev, struct enclosure_component *ecomp, enum enclosure_component_setting val) { unsigned char desc[4]; unsigned char *desc_ptr; desc_ptr = ses_get_page2_descriptor(edev, ecomp); if (!desc_ptr) return -EIO; init_device_slot_control(desc, ecomp, desc_ptr); switch (val) { case ENCLOSURE_SETTING_DISABLED: desc[2] &= 0x7f; ecomp->active = 0; break; case ENCLOSURE_SETTING_ENABLED: desc[2] |= 0x80; ecomp->active = 1; break; default: /* SES doesn't do the SGPIO blink settings */ return -EINVAL; } return ses_set_page2_descriptor(edev, ecomp, desc); } static int ses_show_id(struct enclosure_device *edev, char *buf) { struct ses_device *ses_dev = edev->scratch; unsigned long long id = get_unaligned_be64(ses_dev->page1+8+4); return sprintf(buf, "%#llx\n", id); } static void ses_get_power_status(struct enclosure_device *edev, struct enclosure_component *ecomp) { unsigned char *desc; desc = ses_get_page2_descriptor(edev, ecomp); if (desc) ecomp->power_status = (desc[3] & 0x10) ? 0 : 1; } static int ses_set_power_status(struct enclosure_device *edev, struct enclosure_component *ecomp, int val) { unsigned char desc[4]; unsigned char *desc_ptr; desc_ptr = ses_get_page2_descriptor(edev, ecomp); if (!desc_ptr) return -EIO; init_device_slot_control(desc, ecomp, desc_ptr); switch (val) { /* power = 1 is device_off = 0 and vice versa */ case 0: desc[3] |= 0x10; break; case 1: desc[3] &= 0xef; break; default: return -EINVAL; } ecomp->power_status = val; return ses_set_page2_descriptor(edev, ecomp, desc); } static struct enclosure_component_callbacks ses_enclosure_callbacks = { .get_fault = ses_get_fault, .set_fault = ses_set_fault, .get_status = ses_get_status, .get_locate = ses_get_locate, .set_locate = ses_set_locate, .get_power_status = ses_get_power_status, .set_power_status = ses_set_power_status, .set_active = ses_set_active, .show_id = ses_show_id, }; struct ses_host_edev { struct Scsi_Host *shost; struct enclosure_device *edev; }; #if 0 int ses_match_host(struct enclosure_device *edev, void *data) { struct ses_host_edev *sed = data; struct scsi_device *sdev; if (!scsi_is_sdev_device(edev->edev.parent)) return 0; sdev = to_scsi_device(edev->edev.parent); if (sdev->host != sed->shost) return 0; sed->edev = edev; return 1; } #endif /* 0 */ static void ses_process_descriptor(struct enclosure_component *ecomp, unsigned char *desc) { int eip = desc[0] & 0x10; int invalid = desc[0] & 0x80; enum scsi_protocol proto = desc[0] & 0x0f; u64 addr = 0; int slot = -1; struct ses_component *scomp = ecomp->scratch; unsigned char *d; if (invalid) return; switch (proto) { case SCSI_PROTOCOL_FCP: if (eip) { d = desc + 4; slot = d[3]; } break; case SCSI_PROTOCOL_SAS: if (eip) { d = desc + 4; slot = d[3]; d = desc + 8; } else d = desc + 4; /* only take the phy0 addr */ addr = (u64)d[12] << 56 | (u64)d[13] << 48 | (u64)d[14] << 40 | (u64)d[15] << 32 | (u64)d[16] << 24 | (u64)d[17] << 16 | (u64)d[18] << 8 | (u64)d[19]; break; default: /* FIXME: Need to add more protocols than just SAS */ break; } ecomp->slot = slot; scomp->addr = addr; } struct efd { u64 addr; struct device *dev; }; static int ses_enclosure_find_by_addr(struct enclosure_device *edev, void *data) { struct efd *efd = data; int i; struct ses_component *scomp; if (!edev->component[0].scratch) return 0; for (i = 0; i < edev->components; i++) { scomp = edev->component[i].scratch; if (scomp->addr != efd->addr) continue; if (enclosure_add_device(edev, i, efd->dev) == 0) kobject_uevent(&efd->dev->kobj, KOBJ_CHANGE); return 1; } return 0; } #define INIT_ALLOC_SIZE 32 static void ses_enclosure_data_process(struct enclosure_device *edev, struct scsi_device *sdev, int create) { u32 result; unsigned char *buf = NULL, *type_ptr, *desc_ptr, *addl_desc_ptr = NULL; int i, j, page7_len, len, components; struct ses_device *ses_dev = edev->scratch; int types = ses_dev->page1_num_types; unsigned char *hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL); if (!hdr_buf) goto simple_populate; /* re-read page 10 */ if (ses_dev->page10) ses_recv_diag(sdev, 10, ses_dev->page10, ses_dev->page10_len); /* Page 7 for the descriptors is optional */ result = ses_recv_diag(sdev, 7, hdr_buf, INIT_ALLOC_SIZE); if (result) goto simple_populate; page7_len = len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; /* add 1 for trailing '\0' we'll use */ buf = kzalloc(len + 1, GFP_KERNEL); if (!buf) goto simple_populate; result = ses_recv_diag(sdev, 7, buf, len); if (result) { simple_populate: kfree(buf); buf = NULL; desc_ptr = NULL; len = 0; page7_len = 0; } else { desc_ptr = buf + 8; len = (desc_ptr[2] << 8) + desc_ptr[3]; /* skip past overall descriptor */ desc_ptr += len + 4; } if (ses_dev->page10) addl_desc_ptr = ses_dev->page10 + 8; type_ptr = ses_dev->page1_types; components = 0; for (i = 0; i < types; i++, type_ptr += 4) { for (j = 0; j < type_ptr[1]; j++) { char *name = NULL; struct enclosure_component *ecomp; if (desc_ptr) { if (desc_ptr >= buf + page7_len) { desc_ptr = NULL; } else { len = (desc_ptr[2] << 8) + desc_ptr[3]; desc_ptr += 4; /* Add trailing zero - pushes into * reserved space */ desc_ptr[len] = '\0'; name = desc_ptr; } } if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) { if (create) ecomp = enclosure_component_alloc( edev, components++, type_ptr[0], name); else ecomp = &edev->component[components++]; if (!IS_ERR(ecomp)) { if (addl_desc_ptr) ses_process_descriptor( ecomp, addl_desc_ptr); if (create) enclosure_component_register( ecomp); } } if (desc_ptr) desc_ptr += len; if (addl_desc_ptr && /* only find additional descriptions for specific devices */ (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE || type_ptr[0] == ENCLOSURE_COMPONENT_SAS_EXPANDER || /* these elements are optional */ type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT || type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT || type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS)) addl_desc_ptr += addl_desc_ptr[1] + 2; } } kfree(buf); kfree(hdr_buf); } static void ses_match_to_enclosure(struct enclosure_device *edev, struct scsi_device *sdev, int refresh) { struct scsi_device *edev_sdev = to_scsi_device(edev->edev.parent); struct efd efd = { .addr = 0, }; if (refresh) ses_enclosure_data_process(edev, edev_sdev, 0); if (scsi_is_sas_rphy(sdev->sdev_target->dev.parent)) efd.addr = sas_get_address(sdev); if (efd.addr) { efd.dev = &sdev->sdev_gendev; enclosure_for_each_device(ses_enclosure_find_by_addr, &efd); } } static int ses_intf_add(struct device *cdev, struct class_interface *intf) { struct scsi_device *sdev = to_scsi_device(cdev->parent); struct scsi_device *tmp_sdev; unsigned char *buf = NULL, *hdr_buf, *type_ptr; struct ses_device *ses_dev; u32 result; int i, types, len, components = 0; int err = -ENOMEM; int num_enclosures; struct enclosure_device *edev; struct ses_component *scomp = NULL; if (!scsi_device_enclosure(sdev)) { /* not an enclosure, but might be in one */ struct enclosure_device *prev = NULL; while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) { ses_match_to_enclosure(edev, sdev, 1); prev = edev; } return -ENODEV; } /* TYPE_ENCLOSURE prints a message in probe */ if (sdev->type != TYPE_ENCLOSURE) sdev_printk(KERN_NOTICE, sdev, "Embedded Enclosure Device\n"); ses_dev = kzalloc(sizeof(*ses_dev), GFP_KERNEL); hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL); if (!hdr_buf || !ses_dev) goto err_init_free; result = ses_recv_diag(sdev, 1, hdr_buf, INIT_ALLOC_SIZE); if (result) goto recv_failed; len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; buf = kzalloc(len, GFP_KERNEL); if (!buf) goto err_free; result = ses_recv_diag(sdev, 1, buf, len); if (result) goto recv_failed; types = 0; /* we always have one main enclosure and the rest are referred * to as secondary subenclosures */ num_enclosures = buf[1] + 1; /* begin at the enclosure descriptor */ type_ptr = buf + 8; /* skip all the enclosure descriptors */ for (i = 0; i < num_enclosures && type_ptr < buf + len; i++) { types += type_ptr[2]; type_ptr += type_ptr[3] + 4; } ses_dev->page1_types = type_ptr; ses_dev->page1_num_types = types; for (i = 0; i < types && type_ptr < buf + len; i++, type_ptr += 4) { if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) components += type_ptr[1]; } ses_dev->page1 = buf; ses_dev->page1_len = len; buf = NULL; result = ses_recv_diag(sdev, 2, hdr_buf, INIT_ALLOC_SIZE); if (result) goto recv_failed; len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; buf = kzalloc(len, GFP_KERNEL); if (!buf) goto err_free; /* make sure getting page 2 actually works */ result = ses_recv_diag(sdev, 2, buf, len); if (result) goto recv_failed; ses_dev->page2 = buf; ses_dev->page2_len = len; buf = NULL; /* The additional information page --- allows us * to match up the devices */ result = ses_recv_diag(sdev, 10, hdr_buf, INIT_ALLOC_SIZE); if (!result) { len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; buf = kzalloc(len, GFP_KERNEL); if (!buf) goto err_free; result = ses_recv_diag(sdev, 10, buf, len); if (result) goto recv_failed; ses_dev->page10 = buf; ses_dev->page10_len = len; buf = NULL; } scomp = kzalloc(sizeof(struct ses_component) * components, GFP_KERNEL); if (!scomp) goto err_free; edev = enclosure_register(cdev->parent, dev_name(&sdev->sdev_gendev), components, &ses_enclosure_callbacks); if (IS_ERR(edev)) { err = PTR_ERR(edev); goto err_free; } kfree(hdr_buf); edev->scratch = ses_dev; for (i = 0; i < components; i++) edev->component[i].scratch = scomp + i; ses_enclosure_data_process(edev, sdev, 1); /* see if there are any devices matching before * we found the enclosure */ shost_for_each_device(tmp_sdev, sdev->host) { if (tmp_sdev->lun != 0 || scsi_device_enclosure(tmp_sdev)) continue; ses_match_to_enclosure(edev, tmp_sdev, 0); } return 0; recv_failed: sdev_printk(KERN_ERR, sdev, "Failed to get diagnostic page 0x%x\n", result); err = -ENODEV; err_free: kfree(buf); kfree(scomp); kfree(ses_dev->page10); kfree(ses_dev->page2); kfree(ses_dev->page1); err_init_free: kfree(ses_dev); kfree(hdr_buf); sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n", err); return err; } static int ses_remove(struct device *dev) { return 0; } static void ses_intf_remove_component(struct scsi_device *sdev) { struct enclosure_device *edev, *prev = NULL; while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) { prev = edev; if (!enclosure_remove_device(edev, &sdev->sdev_gendev)) break; } if (edev) put_device(&edev->edev); } static void ses_intf_remove_enclosure(struct scsi_device *sdev) { struct enclosure_device *edev; struct ses_device *ses_dev; /* exact match to this enclosure */ edev = enclosure_find(&sdev->sdev_gendev, NULL); if (!edev) return; enclosure_unregister(edev); ses_dev = edev->scratch; edev->scratch = NULL; kfree(ses_dev->page10); kfree(ses_dev->page1); kfree(ses_dev->page2); kfree(ses_dev); kfree(edev->component[0].scratch); put_device(&edev->edev); } static void ses_intf_remove(struct device *cdev, struct class_interface *intf) { struct scsi_device *sdev = to_scsi_device(cdev->parent); if (!scsi_device_enclosure(sdev)) ses_intf_remove_component(sdev); else ses_intf_remove_enclosure(sdev); } static struct class_interface ses_interface = { .add_dev = ses_intf_add, .remove_dev = ses_intf_remove, }; static struct scsi_driver ses_template = { .gendrv = { .name = "ses", .owner = THIS_MODULE, .probe = ses_probe, .remove = ses_remove, }, }; static int __init ses_init(void) { int err; err = scsi_register_interface(&ses_interface); if (err) return err; err = scsi_register_driver(&ses_template.gendrv); if (err) goto out_unreg; return 0; out_unreg: scsi_unregister_interface(&ses_interface); return err; } static void __exit ses_exit(void) { scsi_unregister_driver(&ses_template.gendrv); scsi_unregister_interface(&ses_interface); } module_init(ses_init); module_exit(ses_exit); MODULE_ALIAS_SCSI_DEVICE(TYPE_ENCLOSURE); MODULE_AUTHOR("James Bottomley"); MODULE_DESCRIPTION("SCSI Enclosure Services (ses) driver"); MODULE_LICENSE("GPL v2");