/****************************************************************************** * usb_intf.c * * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved. * Linux device driver for RTL8192SU * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * Modifications for inclusion into the Linux staging tree are * Copyright(c) 2010 Larry Finger. All rights reserved. * * Contact information: * WLAN FAE * Larry Finger * ******************************************************************************/ #define _HCI_INTF_C_ #include #include #include #include "osdep_service.h" #include "drv_types.h" #include "recv_osdep.h" #include "xmit_osdep.h" #include "rtl8712_efuse.h" #include "usb_ops.h" #include "usb_osintf.h" static struct usb_interface *pintf; static int r871xu_drv_init(struct usb_interface *pusb_intf, const struct usb_device_id *pdid); static void r871xu_dev_remove(struct usb_interface *pusb_intf); static struct usb_device_id rtl871x_usb_id_tbl[] = { /* RTL8188SU */ /* Realtek */ {USB_DEVICE(0x0BDA, 0x8171)}, {USB_DEVICE(0x0bda, 0x8173)}, {USB_DEVICE(0x0bda, 0x8712)}, {USB_DEVICE(0x0bda, 0x8713)}, {USB_DEVICE(0x0bda, 0xC512)}, /* Abocom */ {USB_DEVICE(0x07B8, 0x8188)}, /* ASUS */ {USB_DEVICE(0x0B05, 0x1786)}, {USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */ /* Belkin */ {USB_DEVICE(0x050D, 0x945A)}, /* ISY IWL - Belkin clone */ {USB_DEVICE(0x050D, 0x11F1)}, /* Corega */ {USB_DEVICE(0x07AA, 0x0047)}, /* D-Link */ {USB_DEVICE(0x2001, 0x3306)}, {USB_DEVICE(0x07D1, 0x3306)}, /* 11n mode disable */ /* Edimax */ {USB_DEVICE(0x7392, 0x7611)}, /* EnGenius */ {USB_DEVICE(0x1740, 0x9603)}, /* Hawking */ {USB_DEVICE(0x0E66, 0x0016)}, /* Hercules */ {USB_DEVICE(0x06F8, 0xE034)}, {USB_DEVICE(0x06F8, 0xE032)}, /* Logitec */ {USB_DEVICE(0x0789, 0x0167)}, /* PCI */ {USB_DEVICE(0x2019, 0xAB28)}, {USB_DEVICE(0x2019, 0xED16)}, /* Sitecom */ {USB_DEVICE(0x0DF6, 0x0057)}, {USB_DEVICE(0x0DF6, 0x0045)}, {USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */ {USB_DEVICE(0x0DF6, 0x004B)}, {USB_DEVICE(0x0DF6, 0x005B)}, {USB_DEVICE(0x0DF6, 0x005D)}, {USB_DEVICE(0x0DF6, 0x0063)}, /* Sweex */ {USB_DEVICE(0x177F, 0x0154)}, /* Thinkware */ {USB_DEVICE(0x0BDA, 0x5077)}, /* Toshiba */ {USB_DEVICE(0x1690, 0x0752)}, /* - */ {USB_DEVICE(0x20F4, 0x646B)}, {USB_DEVICE(0x083A, 0xC512)}, {USB_DEVICE(0x25D4, 0x4CA1)}, {USB_DEVICE(0x25D4, 0x4CAB)}, /* RTL8191SU */ /* Realtek */ {USB_DEVICE(0x0BDA, 0x8172)}, {USB_DEVICE(0x0BDA, 0x8192)}, /* Amigo */ {USB_DEVICE(0x0EB0, 0x9061)}, /* ASUS/EKB */ {USB_DEVICE(0x13D3, 0x3323)}, {USB_DEVICE(0x13D3, 0x3311)}, /* 11n mode disable */ {USB_DEVICE(0x13D3, 0x3342)}, /* ASUS/EKBLenovo */ {USB_DEVICE(0x13D3, 0x3333)}, {USB_DEVICE(0x13D3, 0x3334)}, {USB_DEVICE(0x13D3, 0x3335)}, /* 11n mode disable */ {USB_DEVICE(0x13D3, 0x3336)}, /* 11n mode disable */ /* ASUS/Media BOX */ {USB_DEVICE(0x13D3, 0x3309)}, /* Belkin */ {USB_DEVICE(0x050D, 0x815F)}, /* D-Link */ {USB_DEVICE(0x07D1, 0x3302)}, {USB_DEVICE(0x07D1, 0x3300)}, {USB_DEVICE(0x07D1, 0x3303)}, /* Edimax */ {USB_DEVICE(0x7392, 0x7612)}, /* EnGenius */ {USB_DEVICE(0x1740, 0x9605)}, /* Guillemot */ {USB_DEVICE(0x06F8, 0xE031)}, /* Hawking */ {USB_DEVICE(0x0E66, 0x0015)}, /* Mediao */ {USB_DEVICE(0x13D3, 0x3306)}, /* PCI */ {USB_DEVICE(0x2019, 0xED18)}, {USB_DEVICE(0x2019, 0x4901)}, /* Sitecom */ {USB_DEVICE(0x0DF6, 0x0058)}, {USB_DEVICE(0x0DF6, 0x0049)}, {USB_DEVICE(0x0DF6, 0x004C)}, {USB_DEVICE(0x0DF6, 0x006C)}, {USB_DEVICE(0x0DF6, 0x0064)}, /* Skyworth */ {USB_DEVICE(0x14b2, 0x3300)}, {USB_DEVICE(0x14b2, 0x3301)}, {USB_DEVICE(0x14B2, 0x3302)}, /* - */ {USB_DEVICE(0x04F2, 0xAFF2)}, {USB_DEVICE(0x04F2, 0xAFF5)}, {USB_DEVICE(0x04F2, 0xAFF6)}, {USB_DEVICE(0x13D3, 0x3339)}, {USB_DEVICE(0x13D3, 0x3340)}, /* 11n mode disable */ {USB_DEVICE(0x13D3, 0x3341)}, /* 11n mode disable */ {USB_DEVICE(0x13D3, 0x3310)}, {USB_DEVICE(0x13D3, 0x3325)}, /* RTL8192SU */ /* Realtek */ {USB_DEVICE(0x0BDA, 0x8174)}, /* Belkin */ {USB_DEVICE(0x050D, 0x845A)}, /* Corega */ {USB_DEVICE(0x07AA, 0x0051)}, /* Edimax */ {USB_DEVICE(0x7392, 0x7622)}, /* NEC */ {USB_DEVICE(0x0409, 0x02B6)}, {} }; MODULE_DEVICE_TABLE(usb, rtl871x_usb_id_tbl); static struct specific_device_id specific_device_id_tbl[] = { {.idVendor = 0x0b05, .idProduct = 0x1791, .flags = SPEC_DEV_ID_DISABLE_HT}, {.idVendor = 0x0df6, .idProduct = 0x0059, .flags = SPEC_DEV_ID_DISABLE_HT}, {.idVendor = 0x13d3, .idProduct = 0x3306, .flags = SPEC_DEV_ID_DISABLE_HT}, {.idVendor = 0x13D3, .idProduct = 0x3311, .flags = SPEC_DEV_ID_DISABLE_HT}, {.idVendor = 0x13d3, .idProduct = 0x3335, .flags = SPEC_DEV_ID_DISABLE_HT}, {.idVendor = 0x13d3, .idProduct = 0x3336, .flags = SPEC_DEV_ID_DISABLE_HT}, {.idVendor = 0x13d3, .idProduct = 0x3340, .flags = SPEC_DEV_ID_DISABLE_HT}, {.idVendor = 0x13d3, .idProduct = 0x3341, .flags = SPEC_DEV_ID_DISABLE_HT}, {} }; struct drv_priv { struct usb_driver r871xu_drv; int drv_registered; }; #ifdef CONFIG_PM static int r871x_suspend(struct usb_interface *pusb_intf, pm_message_t state) { struct net_device *pnetdev = usb_get_intfdata(pusb_intf); struct _adapter *padapter = netdev_priv(pnetdev); netdev_info(pnetdev, "Suspending...\n"); if (!pnetdev || !netif_running(pnetdev)) { netdev_info(pnetdev, "Unable to suspend\n"); return 0; } padapter->bSuspended = true; rtl871x_intf_stop(padapter); if (pnetdev->netdev_ops->ndo_stop) pnetdev->netdev_ops->ndo_stop(pnetdev); mdelay(10); netif_device_detach(pnetdev); return 0; } static void rtl871x_intf_resume(struct _adapter *padapter) { if (padapter->dvobjpriv.inirp_init) padapter->dvobjpriv.inirp_init(padapter); } static int r871x_resume(struct usb_interface *pusb_intf) { struct net_device *pnetdev = usb_get_intfdata(pusb_intf); struct _adapter *padapter = netdev_priv(pnetdev); netdev_info(pnetdev, "Resuming...\n"); if (!pnetdev || !netif_running(pnetdev)) { netdev_info(pnetdev, "Unable to resume\n"); return 0; } netif_device_attach(pnetdev); if (pnetdev->netdev_ops->ndo_open) pnetdev->netdev_ops->ndo_open(pnetdev); padapter->bSuspended = false; rtl871x_intf_resume(padapter); return 0; } static int r871x_reset_resume(struct usb_interface *pusb_intf) { /* dummy routine */ return 0; } #endif static struct drv_priv drvpriv = { .r871xu_drv.name = "r8712u", .r871xu_drv.id_table = rtl871x_usb_id_tbl, .r871xu_drv.probe = r871xu_drv_init, .r871xu_drv.disconnect = r871xu_dev_remove, #ifdef CONFIG_PM .r871xu_drv.suspend = r871x_suspend, .r871xu_drv.resume = r871x_resume, .r871xu_drv.reset_resume = r871x_reset_resume, #endif }; static uint r8712_usb_dvobj_init(struct _adapter *padapter) { uint status = _SUCCESS; struct usb_host_interface *phost_iface; struct usb_interface_descriptor *piface_desc; struct dvobj_priv *pdvobjpriv = &padapter->dvobjpriv; struct usb_device *pusbd = pdvobjpriv->pusbdev; pdvobjpriv->padapter = padapter; padapter->EepromAddressSize = 6; phost_iface = pintf->cur_altsetting; piface_desc = &phost_iface->desc; pdvobjpriv->nr_endpoint = piface_desc->bNumEndpoints; if (pusbd->speed == USB_SPEED_HIGH) { pdvobjpriv->ishighspeed = true; dev_info(&pusbd->dev, "r8712u: USB_SPEED_HIGH with %d endpoints\n", pdvobjpriv->nr_endpoint); } else { pdvobjpriv->ishighspeed = false; dev_info(&pusbd->dev, "r8712u: USB_SPEED_LOW with %d endpoints\n", pdvobjpriv->nr_endpoint); } if ((r8712_alloc_io_queue(padapter)) == _FAIL) status = _FAIL; return status; } static void r8712_usb_dvobj_deinit(struct _adapter *padapter) { } void rtl871x_intf_stop(struct _adapter *padapter) { /*disable_hw_interrupt*/ if (!padapter->bSurpriseRemoved) { /*device still exists, so driver can do i/o operation * TODO: */ } /* cancel in irp */ if (padapter->dvobjpriv.inirp_deinit) padapter->dvobjpriv.inirp_deinit(padapter); /* cancel out irp */ r8712_usb_write_port_cancel(padapter); /* TODO:cancel other irps */ } void r871x_dev_unload(struct _adapter *padapter) { if (padapter->bup) { /*s1.*/ padapter->bDriverStopped = true; /*s3.*/ rtl871x_intf_stop(padapter); /*s4.*/ r8712_stop_drv_threads(padapter); /*s5.*/ if (!padapter->bSurpriseRemoved) { padapter->hw_init_completed = false; rtl8712_hal_deinit(padapter); } /*s6.*/ if (padapter->dvobj_deinit) padapter->dvobj_deinit(padapter); padapter->bup = false; } } static void disable_ht_for_spec_devid(const struct usb_device_id *pdid, struct _adapter *padapter) { u16 vid, pid; u32 flags; int i; int num = ARRAY_SIZE(specific_device_id_tbl); for (i = 0; i < num; i++) { vid = specific_device_id_tbl[i].idVendor; pid = specific_device_id_tbl[i].idProduct; flags = specific_device_id_tbl[i].flags; if ((pdid->idVendor == vid) && (pdid->idProduct == pid) && (flags & SPEC_DEV_ID_DISABLE_HT)) { padapter->registrypriv.ht_enable = 0; padapter->registrypriv.cbw40_enable = 0; padapter->registrypriv.ampdu_enable = 0; } } } static const struct device_type wlan_type = { .name = "wlan", }; /* * drv_init() - a device potentially for us * * notes: drv_init() is called when the bus driver has located a card for us * to support. We accept the new device by returning 0. */ static int r871xu_drv_init(struct usb_interface *pusb_intf, const struct usb_device_id *pdid) { uint status; struct _adapter *padapter = NULL; struct dvobj_priv *pdvobjpriv; struct net_device *pnetdev; struct usb_device *udev; /* In this probe function, O.S. will provide the usb interface pointer * to driver. We have to increase the reference count of the usb device * structure by using the usb_get_dev function. */ udev = interface_to_usbdev(pusb_intf); usb_get_dev(udev); pintf = pusb_intf; /* step 1. */ pnetdev = r8712_init_netdev(); if (!pnetdev) goto error; padapter = netdev_priv(pnetdev); disable_ht_for_spec_devid(pdid, padapter); pdvobjpriv = &padapter->dvobjpriv; pdvobjpriv->padapter = padapter; padapter->dvobjpriv.pusbdev = udev; padapter->pusb_intf = pusb_intf; usb_set_intfdata(pusb_intf, pnetdev); SET_NETDEV_DEV(pnetdev, &pusb_intf->dev); pnetdev->dev.type = &wlan_type; /* step 2. */ padapter->dvobj_init = r8712_usb_dvobj_init; padapter->dvobj_deinit = r8712_usb_dvobj_deinit; padapter->halpriv.hal_bus_init = r8712_usb_hal_bus_init; padapter->dvobjpriv.inirp_init = r8712_usb_inirp_init; padapter->dvobjpriv.inirp_deinit = r8712_usb_inirp_deinit; /* step 3. * initialize the dvobj_priv */ if (!padapter->dvobj_init) { goto error; } else { status = padapter->dvobj_init(padapter); if (status != _SUCCESS) goto error; } /* step 4. */ status = r8712_init_drv_sw(padapter); if (status == _FAIL) goto error; /* step 5. read efuse/eeprom data and get mac_addr */ { int i, offset; u8 mac[6]; u8 tmpU1b, AutoloadFail, eeprom_CustomerID; u8 *pdata = padapter->eeprompriv.efuse_eeprom_data; tmpU1b = r8712_read8(padapter, EE_9346CR);/*CR9346*/ /* To check system boot selection.*/ dev_info(&udev->dev, "r8712u: Boot from %s: Autoload %s\n", (tmpU1b & _9356SEL) ? "EEPROM" : "EFUSE", (tmpU1b & _EEPROM_EN) ? "OK" : "Failed"); /* To check autoload success or not.*/ if (tmpU1b & _EEPROM_EN) { AutoloadFail = true; /* The following operations prevent Efuse leakage by * turning on 2.5V. */ tmpU1b = r8712_read8(padapter, EFUSE_TEST + 3); r8712_write8(padapter, EFUSE_TEST + 3, tmpU1b | 0x80); msleep(20); r8712_write8(padapter, EFUSE_TEST + 3, (tmpU1b & (~BIT(7)))); /* Retrieve Chip version. * Recognize IC version by Reg0x4 BIT15. */ tmpU1b = (u8)((r8712_read32(padapter, PMC_FSM) >> 15) & 0x1F); if (tmpU1b == 0x3) padapter->registrypriv.chip_version = RTL8712_3rdCUT; else padapter->registrypriv.chip_version = (tmpU1b >> 1) + 1; switch (padapter->registrypriv.chip_version) { case RTL8712_1stCUT: case RTL8712_2ndCUT: case RTL8712_3rdCUT: break; default: padapter->registrypriv.chip_version = RTL8712_2ndCUT; break; } for (i = 0, offset = 0; i < 128; i += 8, offset++) r8712_efuse_pg_packet_read(padapter, offset, &pdata[i]); if (!r8712_initmac || !mac_pton(r8712_initmac, mac)) { /* Use the mac address stored in the Efuse * offset = 0x12 for usb in efuse */ ether_addr_copy(mac, &pdata[0x12]); } eeprom_CustomerID = pdata[0x52]; switch (eeprom_CustomerID) { case EEPROM_CID_ALPHA: padapter->eeprompriv.CustomerID = RT_CID_819x_ALPHA; break; case EEPROM_CID_CAMEO: padapter->eeprompriv.CustomerID = RT_CID_819x_CAMEO; break; case EEPROM_CID_SITECOM: padapter->eeprompriv.CustomerID = RT_CID_819x_Sitecom; break; case EEPROM_CID_COREGA: padapter->eeprompriv.CustomerID = RT_CID_COREGA; break; case EEPROM_CID_Senao: padapter->eeprompriv.CustomerID = RT_CID_819x_Senao; break; case EEPROM_CID_EDIMAX_BELKIN: padapter->eeprompriv.CustomerID = RT_CID_819x_Edimax_Belkin; break; case EEPROM_CID_SERCOMM_BELKIN: padapter->eeprompriv.CustomerID = RT_CID_819x_Sercomm_Belkin; break; case EEPROM_CID_WNC_COREGA: padapter->eeprompriv.CustomerID = RT_CID_819x_WNC_COREGA; break; case EEPROM_CID_WHQL: break; case EEPROM_CID_NetCore: padapter->eeprompriv.CustomerID = RT_CID_819x_Netcore; break; case EEPROM_CID_CAMEO1: padapter->eeprompriv.CustomerID = RT_CID_819x_CAMEO1; break; case EEPROM_CID_CLEVO: padapter->eeprompriv.CustomerID = RT_CID_819x_CLEVO; break; default: padapter->eeprompriv.CustomerID = RT_CID_DEFAULT; break; } dev_info(&udev->dev, "r8712u: CustomerID = 0x%.4x\n", padapter->eeprompriv.CustomerID); /* Led mode */ switch (padapter->eeprompriv.CustomerID) { case RT_CID_DEFAULT: case RT_CID_819x_ALPHA: case RT_CID_819x_CAMEO: padapter->ledpriv.LedStrategy = SW_LED_MODE1; padapter->ledpriv.bRegUseLed = true; break; case RT_CID_819x_Sitecom: padapter->ledpriv.LedStrategy = SW_LED_MODE2; padapter->ledpriv.bRegUseLed = true; break; case RT_CID_COREGA: case RT_CID_819x_Senao: padapter->ledpriv.LedStrategy = SW_LED_MODE3; padapter->ledpriv.bRegUseLed = true; break; case RT_CID_819x_Edimax_Belkin: padapter->ledpriv.LedStrategy = SW_LED_MODE4; padapter->ledpriv.bRegUseLed = true; break; case RT_CID_819x_Sercomm_Belkin: padapter->ledpriv.LedStrategy = SW_LED_MODE5; padapter->ledpriv.bRegUseLed = true; break; case RT_CID_819x_WNC_COREGA: padapter->ledpriv.LedStrategy = SW_LED_MODE6; padapter->ledpriv.bRegUseLed = true; break; default: padapter->ledpriv.LedStrategy = SW_LED_MODE0; padapter->ledpriv.bRegUseLed = false; break; } } else { AutoloadFail = false; } if ((!AutoloadFail) || ((mac[0] == 0xff) && (mac[1] == 0xff) && (mac[2] == 0xff) && (mac[3] == 0xff) && (mac[4] == 0xff) && (mac[5] == 0xff)) || ((mac[0] == 0x00) && (mac[1] == 0x00) && (mac[2] == 0x00) && (mac[3] == 0x00) && (mac[4] == 0x00) && (mac[5] == 0x00))) { mac[0] = 0x00; mac[1] = 0xe0; mac[2] = 0x4c; mac[3] = 0x87; mac[4] = 0x00; mac[5] = 0x00; } if (r8712_initmac) { /* Make sure the user did not select a multicast * address by setting bit 1 of first octet. */ mac[0] &= 0xFE; dev_info(&udev->dev, "r8712u: MAC Address from user = %pM\n", mac); } else dev_info(&udev->dev, "r8712u: MAC Address from efuse = %pM\n", mac); ether_addr_copy(pnetdev->dev_addr, mac); } /* step 6. Load the firmware asynchronously */ if (rtl871x_load_fw(padapter)) goto error; spin_lock_init(&padapter->lockRxFF0Filter); mutex_init(&padapter->mutex_start); return 0; error: usb_put_dev(udev); usb_set_intfdata(pusb_intf, NULL); if (padapter && padapter->dvobj_deinit != NULL) padapter->dvobj_deinit(padapter); if (pnetdev) free_netdev(pnetdev); return -ENODEV; } /* rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove() * => how to recognize both */ static void r871xu_dev_remove(struct usb_interface *pusb_intf) { struct net_device *pnetdev = usb_get_intfdata(pusb_intf); struct usb_device *udev = interface_to_usbdev(pusb_intf); if (pnetdev) { struct _adapter *padapter = netdev_priv(pnetdev); usb_set_intfdata(pusb_intf, NULL); release_firmware(padapter->fw); /* never exit with a firmware callback pending */ wait_for_completion(&padapter->rtl8712_fw_ready); if (drvpriv.drv_registered) padapter->bSurpriseRemoved = true; unregister_netdev(pnetdev); /* will call netdev_close() */ flush_scheduled_work(); udelay(1); /* Stop driver mlme relation timer */ r8712_stop_drv_timers(padapter); r871x_dev_unload(padapter); r8712_free_drv_sw(padapter); /* decrease the reference count of the usb device structure * when disconnect */ usb_put_dev(udev); } /* If we didn't unplug usb dongle and remove/insert module, driver * fails on sitesurvey for the first time when device is up. * Reset usb port for sitesurvey fail issue. */ if (udev->state != USB_STATE_NOTATTACHED) usb_reset_device(udev); } static int __init r8712u_drv_entry(void) { drvpriv.drv_registered = true; return usb_register(&drvpriv.r871xu_drv); } static void __exit r8712u_drv_halt(void) { drvpriv.drv_registered = false; usb_deregister(&drvpriv.r871xu_drv); } module_init(r8712u_drv_entry); module_exit(r8712u_drv_halt);