menu "Kernel hacking" config TRACE_IRQFLAGS_SUPPORT def_bool y source "lib/Kconfig.debug" config STRICT_DEVMEM bool "Filter access to /dev/mem" ---help--- If this option is disabled, you allow userspace (root) access to all of memory, including kernel and userspace memory. Accidental access to this is obviously disastrous, but specific access can be used by people debugging the kernel. Note that with PAT support enabled, even in this case there are restrictions on /dev/mem use due to the cache aliasing requirements. If this option is switched on, the /dev/mem file only allows userspace access to PCI space and the BIOS code and data regions. This is sufficient for dosemu and X and all common users of /dev/mem. If in doubt, say Y. config X86_VERBOSE_BOOTUP bool "Enable verbose x86 bootup info messages" default y ---help--- Enables the informational output from the decompression stage (e.g. bzImage) of the boot. If you disable this you will still see errors. Disable this if you want silent bootup. config EARLY_PRINTK bool "Early printk" if EMBEDDED default y ---help--- Write kernel log output directly into the VGA buffer or to a serial port. This is useful for kernel debugging when your machine crashes very early before the console code is initialized. For normal operation it is not recommended because it looks ugly and doesn't cooperate with klogd/syslogd or the X server. You should normally N here, unless you want to debug such a crash. config EARLY_PRINTK_DBGP bool "Early printk via EHCI debug port" default n depends on EARLY_PRINTK && PCI ---help--- Write kernel log output directly into the EHCI debug port. This is useful for kernel debugging when your machine crashes very early before the console code is initialized. For normal operation it is not recommended because it looks ugly and doesn't cooperate with klogd/syslogd or the X server. You should normally N here, unless you want to debug such a crash. You need usb debug device. config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL ---help--- This option will cause messages to be printed if free stack space drops below a certain limit. config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" depends on DEBUG_KERNEL ---help--- Enables the display of the minimum amount of free stack which each task has ever had available in the sysrq-T and sysrq-P debug output. This option will slow down process creation somewhat. config DEBUG_PER_CPU_MAPS bool "Debug access to per_cpu maps" depends on DEBUG_KERNEL depends on SMP default n ---help--- Say Y to verify that the per_cpu map being accessed has been setup. Adds a fair amount of code to kernel memory and decreases performance. Say N if unsure. config X86_PTDUMP bool "Export kernel pagetable layout to userspace via debugfs" depends on DEBUG_KERNEL select DEBUG_FS ---help--- Say Y here if you want to show the kernel pagetable layout in a debugfs file. This information is only useful for kernel developers who are working in architecture specific areas of the kernel. It is probably not a good idea to enable this feature in a production kernel. If in doubt, say "N" config DEBUG_RODATA bool "Write protect kernel read-only data structures" default y depends on DEBUG_KERNEL ---help--- Mark the kernel read-only data as write-protected in the pagetables, in order to catch accidental (and incorrect) writes to such const data. This is recommended so that we can catch kernel bugs sooner. If in doubt, say "Y". config DEBUG_RODATA_TEST bool "Testcase for the DEBUG_RODATA feature" depends on DEBUG_RODATA default y ---help--- This option enables a testcase for the DEBUG_RODATA feature as well as for the change_page_attr() infrastructure. If in doubt, say "N" config DEBUG_NX_TEST tristate "Testcase for the NX non-executable stack feature" depends on DEBUG_KERNEL && m ---help--- This option enables a testcase for the CPU NX capability and the software setup of this feature. If in doubt, say "N" config 4KSTACKS bool "Use 4Kb for kernel stacks instead of 8Kb" depends on X86_32 ---help--- If you say Y here the kernel will use a 4Kb stacksize for the kernel stack attached to each process/thread. This facilitates running more threads on a system and also reduces the pressure on the VM subsystem for higher order allocations. This option will also use IRQ stacks to compensate for the reduced stackspace. config DOUBLEFAULT default y bool "Enable doublefault exception handler" if EMBEDDED depends on X86_32 ---help--- This option allows trapping of rare doublefault exceptions that would otherwise cause a system to silently reboot. Disabling this option saves about 4k and might cause you much additional grey hair. config IOMMU_DEBUG bool "Enable IOMMU debugging" depends on GART_IOMMU && DEBUG_KERNEL depends on X86_64 ---help--- Force the IOMMU to on even when you have less than 4GB of memory and add debugging code. On overflow always panic. And allow to enable IOMMU leak tracing. Can be disabled at boot time with iommu=noforce. This will also enable scatter gather list merging. Currently not recommended for production code. When you use it make sure you have a big enough IOMMU/AGP aperture. Most of the options enabled by this can be set more finegrained using the iommu= command line options. See Documentation/x86_64/boot-options.txt for more details. config IOMMU_STRESS bool "Enable IOMMU stress-test mode" ---help--- This option disables various optimizations in IOMMU related code to do real stress testing of the IOMMU code. This option will cause a performance drop and should only be enabled for testing. config IOMMU_LEAK bool "IOMMU leak tracing" depends on IOMMU_DEBUG && DMA_API_DEBUG ---help--- Add a simple leak tracer to the IOMMU code. This is useful when you are debugging a buggy device driver that leaks IOMMU mappings. config X86_DS_SELFTEST bool "DS selftest" default y depends on DEBUG_KERNEL depends on X86_DS ---help--- Perform Debug Store selftests at boot time. If in doubt, say "N". config HAVE_MMIOTRACE_SUPPORT def_bool y # # IO delay types: # config IO_DELAY_TYPE_0X80 int default "0" config IO_DELAY_TYPE_0XED int default "1" config IO_DELAY_TYPE_UDELAY int default "2" config IO_DELAY_TYPE_NONE int default "3" choice prompt "IO delay type" default IO_DELAY_0X80 config IO_DELAY_0X80 bool "port 0x80 based port-IO delay [recommended]" ---help--- This is the traditional Linux IO delay used for in/out_p. It is the most tested hence safest selection here. config IO_DELAY_0XED bool "port 0xed based port-IO delay" ---help--- Use port 0xed as the IO delay. This frees up port 0x80 which is often used as a hardware-debug port. config IO_DELAY_UDELAY bool "udelay based port-IO delay" ---help--- Use udelay(2) as the IO delay method. This provides the delay while not having any side-effect on the IO port space. config IO_DELAY_NONE bool "no port-IO delay" ---help--- No port-IO delay. Will break on old boxes that require port-IO delay for certain operations. Should work on most new machines. endchoice if IO_DELAY_0X80 config DEFAULT_IO_DELAY_TYPE int default IO_DELAY_TYPE_0X80 endif if IO_DELAY_0XED config DEFAULT_IO_DELAY_TYPE int default IO_DELAY_TYPE_0XED endif if IO_DELAY_UDELAY config DEFAULT_IO_DELAY_TYPE int default IO_DELAY_TYPE_UDELAY endif if IO_DELAY_NONE config DEFAULT_IO_DELAY_TYPE int default IO_DELAY_TYPE_NONE endif config DEBUG_BOOT_PARAMS bool "Debug boot parameters" depends on DEBUG_KERNEL depends on DEBUG_FS ---help--- This option will cause struct boot_params to be exported via debugfs. config CPA_DEBUG bool "CPA self-test code" depends on DEBUG_KERNEL ---help--- Do change_page_attr() self-tests every 30 seconds. config OPTIMIZE_INLINING bool "Allow gcc to uninline functions marked 'inline'" ---help--- This option determines if the kernel forces gcc to inline the functions developers have marked 'inline'. Doing so takes away freedom from gcc to do what it thinks is best, which is desirable for the gcc 3.x series of compilers. The gcc 4.x series have a rewritten inlining algorithm and enabling this option will generate a smaller kernel there. Hopefully this algorithm is so good that allowing gcc 4.x and above to make the decision will become the default in the future. Until then this option is there to test gcc for this. If unsure, say N. endmenu