/* Taken from /usr/include/linux/timex.h.  Avoids the need to
 * include kernel header files. */

#ifndef CHRONY_TIMEX_H
#define CHRONY_TIMEX_H

#include <sys/time.h>

struct timex {
	unsigned int modes;	/* mode selector */
	long offset;		/* time offset (usec) */
	long freq;		/* frequency offset (scaled ppm) */
	long maxerror;		/* maximum error (usec) */
	long esterror;		/* estimated error (usec) */
	int status;		/* clock command/status */
	long constant;		/* pll time constant */
	long precision;		/* clock precision (usec) (read only) */
	long tolerance;		/* clock frequency tolerance (ppm)
				 * (read only)
				 */
	struct timeval time;	/* (read only) */
	long tick;		/* (modified) usecs between clock ticks */

	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
	long jitter;            /* pps jitter (us) (ro) */
	int shift;              /* interval duration (s) (shift) (ro) */
	long stabil;            /* pps stability (scaled ppm) (ro) */
	long jitcnt;            /* jitter limit exceeded (ro) */
	long calcnt;            /* calibration intervals (ro) */
	long errcnt;            /* calibration errors (ro) */
	long stbcnt;            /* stability limit exceeded (ro) */

	int  :32; int  :32; int  :32; int  :32;
	int  :32; int  :32; int  :32; int  :32;
	int  :32; int  :32; int  :32; int  :32;
};

#define ADJ_OFFSET		0x0001  /* time offset */
#define ADJ_FREQUENCY		0x0002	/* frequency offset */
#define ADJ_MAXERROR		0x0004	/* maximum time error */
#define ADJ_STATUS		0x0010	/* clock status */
#define ADJ_TIMECONST		0x0020  /* pll time constant */
#define ADJ_NANO		0x2000  /* select nanosecond resolution */
#define ADJ_TICK		0x4000	/* tick value */
#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
#define ADJ_OFFSET_SS_READ	0xa001  /* read-only adjtime */

#define SHIFT_USEC 16		/* frequency offset scale (shift) */

#define STA_PLL		0x0001	/* enable PLL updates (rw) */
#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */

#define STA_INS		0x0010	/* insert leap (rw) */
#define STA_DEL		0x0020	/* delete leap (rw) */
#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */

#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */

#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
#define STA_NANO	0x2000  /* resolution (0 = us, 1 = ns) (ro) */

/* This doesn't seem to be in any include files !! */

extern int adjtimex(struct timex *);

#endif /* CHRONY_TIMEX_H */