/***************************************************************************** * wanmain.c WAN Multiprotocol Router Module. Main code. * * This module is completely hardware-independent and provides * the following common services for the WAN Link Drivers: * o WAN device management (registering, unregistering) * o Network interface management * o Physical connection management (dial-up, incoming calls) * o Logical connection management (switched virtual circuits) * o Protocol encapsulation/decapsulation * * Author: Gideon Hack * * Copyright: (c) 1995-1999 Sangoma Technologies Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * ============================================================================ * Nov 24, 2000 Nenad Corbic Updated for 2.4.X kernels * Nov 07, 2000 Nenad Corbic Fixed the Mulit-Port PPP for kernels 2.2.16 and * greater. * Aug 2, 2000 Nenad Corbic Block the Multi-Port PPP from running on * kernels 2.2.16 or greater. The SyncPPP * has changed. * Jul 13, 2000 Nenad Corbic Added SyncPPP support * Added extra debugging in device_setup(). * Oct 01, 1999 Gideon Hack Update for s514 PCI card * Dec 27, 1996 Gene Kozin Initial version (based on Sangoma's WANPIPE) * Jan 16, 1997 Gene Kozin router_devlist made public * Jan 31, 1997 Alan Cox Hacked it about a bit for 2.1 * Jun 27, 1997 Alan Cox realigned with vendor code * Oct 15, 1997 Farhan Thawar changed wan_encapsulate to add a pad byte of 0 * Apr 20, 1998 Alan Cox Fixed 2.1 symbols * May 17, 1998 K. Baranowski Fixed SNAP encapsulation in wan_encapsulate * Dec 15, 1998 Arnaldo Melo support for firmwares of up to 128000 bytes * check wandev->setup return value * Dec 22, 1998 Arnaldo Melo vmalloc/vfree used in device_setup to allocate * kernel memory and copy configuration data to * kernel space (for big firmwares) * Jun 02, 1999 Gideon Hack Updates for Linux 2.0.X and 2.2.X kernels. *****************************************************************************/ #include /* offsetof(), etc. */ #include #include /* return codes */ #include #include /* support for loadable modules */ #include /* kmalloc(), kfree() */ #include #include #include /* inline mem*, str* functions */ #include /* htons(), etc. */ #include /* WAN router API definitions */ #include /* vmalloc, vfree */ #include /* copy_to/from_user */ #include /* __initfunc et al. */ #define KMEM_SAFETYZONE 8 #define DEV_TO_SLAVE(dev) (*((struct net_device **)netdev_priv(dev))) /* * Function Prototypes */ /* * WAN device IOCTL handlers */ static int wanrouter_device_setup(struct wan_device *wandev, wandev_conf_t __user *u_conf); static int wanrouter_device_stat(struct wan_device *wandev, wandev_stat_t __user *u_stat); static int wanrouter_device_shutdown(struct wan_device *wandev); static int wanrouter_device_new_if(struct wan_device *wandev, wanif_conf_t __user *u_conf); static int wanrouter_device_del_if(struct wan_device *wandev, char __user *u_name); /* * Miscellaneous */ static struct wan_device *wanrouter_find_device(char *name); static int wanrouter_delete_interface(struct wan_device *wandev, char *name); static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) __acquires(lock); static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) __releases(lock); /* * Global Data */ static char wanrouter_fullname[] = "Sangoma WANPIPE Router"; static char wanrouter_copyright[] = "(c) 1995-2000 Sangoma Technologies Inc."; static char wanrouter_modname[] = ROUTER_NAME; /* short module name */ struct wan_device* wanrouter_router_devlist; /* list of registered devices */ /* * Organize Unique Identifiers for encapsulation/decapsulation */ #if 0 static unsigned char wanrouter_oui_ether[] = { 0x00, 0x00, 0x00 }; static unsigned char wanrouter_oui_802_2[] = { 0x00, 0x80, 0xC2 }; #endif static int __init wanrouter_init(void) { int err; printk(KERN_INFO "%s v%u.%u %s\n", wanrouter_fullname, ROUTER_VERSION, ROUTER_RELEASE, wanrouter_copyright); err = wanrouter_proc_init(); if (err) printk(KERN_INFO "%s: can't create entry in proc filesystem!\n", wanrouter_modname); return err; } static void __exit wanrouter_cleanup (void) { wanrouter_proc_cleanup(); } /* * This is just plain dumb. We should move the bugger to drivers/net/wan, * slap it first in directory and make it module_init(). The only reason * for subsys_initcall() here is that net goes after drivers (why, BTW?) */ subsys_initcall(wanrouter_init); module_exit(wanrouter_cleanup); /* * Kernel APIs */ /* * Register WAN device. * o verify device credentials * o create an entry for the device in the /proc/net/router directory * o initialize internally maintained fields of the wan_device structure * o link device data space to a singly-linked list * o if it's the first device, then start kernel 'thread' * o increment module use count * * Return: * 0 Ok * < 0 error. * * Context: process */ int register_wan_device(struct wan_device *wandev) { int err, namelen; if ((wandev == NULL) || (wandev->magic != ROUTER_MAGIC) || (wandev->name == NULL)) return -EINVAL; namelen = strlen(wandev->name); if (!namelen || (namelen > WAN_DRVNAME_SZ)) return -EINVAL; if (wanrouter_find_device(wandev->name)) return -EEXIST; #ifdef WANDEBUG printk(KERN_INFO "%s: registering WAN device %s\n", wanrouter_modname, wandev->name); #endif /* * Register /proc directory entry */ err = wanrouter_proc_add(wandev); if (err) { printk(KERN_INFO "%s: can't create /proc/net/router/%s entry!\n", wanrouter_modname, wandev->name); return err; } /* * Initialize fields of the wan_device structure maintained by the * router and update local data. */ wandev->ndev = 0; wandev->dev = NULL; wandev->next = wanrouter_router_devlist; wanrouter_router_devlist = wandev; return 0; } /* * Unregister WAN device. * o shut down device * o unlink device data space from the linked list * o delete device entry in the /proc/net/router directory * o decrement module use count * * Return: 0 Ok * <0 error. * Context: process */ int unregister_wan_device(char *name) { struct wan_device *wandev, *prev; if (name == NULL) return -EINVAL; for (wandev = wanrouter_router_devlist, prev = NULL; wandev && strcmp(wandev->name, name); prev = wandev, wandev = wandev->next) ; if (wandev == NULL) return -ENODEV; #ifdef WANDEBUG printk(KERN_INFO "%s: unregistering WAN device %s\n", wanrouter_modname, name); #endif if (wandev->state != WAN_UNCONFIGURED) wanrouter_device_shutdown(wandev); if (prev) prev->next = wandev->next; else wanrouter_router_devlist = wandev->next; wanrouter_proc_delete(wandev); return 0; } #if 0 /* * Encapsulate packet. * * Return: encapsulation header size * < 0 - unsupported Ethertype * * Notes: * 1. This function may be called on interrupt context. */ int wanrouter_encapsulate(struct sk_buff *skb, struct net_device *dev, unsigned short type) { int hdr_len = 0; switch (type) { case ETH_P_IP: /* IP datagram encapsulation */ hdr_len += 1; skb_push(skb, 1); skb->data[0] = NLPID_IP; break; case ETH_P_IPX: /* SNAP encapsulation */ case ETH_P_ARP: hdr_len += 7; skb_push(skb, 7); skb->data[0] = 0; skb->data[1] = NLPID_SNAP; skb_copy_to_linear_data_offset(skb, 2, wanrouter_oui_ether, sizeof(wanrouter_oui_ether)); *((unsigned short*)&skb->data[5]) = htons(type); break; default: /* Unknown packet type */ printk(KERN_INFO "%s: unsupported Ethertype 0x%04X on interface %s!\n", wanrouter_modname, type, dev->name); hdr_len = -EINVAL; } return hdr_len; } /* * Decapsulate packet. * * Return: Ethertype (in network order) * 0 unknown encapsulation * * Notes: * 1. This function may be called on interrupt context. */ __be16 wanrouter_type_trans(struct sk_buff *skb, struct net_device *dev) { int cnt = skb->data[0] ? 0 : 1; /* there may be a pad present */ __be16 ethertype; switch (skb->data[cnt]) { case NLPID_IP: /* IP datagramm */ ethertype = htons(ETH_P_IP); cnt += 1; break; case NLPID_SNAP: /* SNAP encapsulation */ if (memcmp(&skb->data[cnt + 1], wanrouter_oui_ether, sizeof(wanrouter_oui_ether))){ printk(KERN_INFO "%s: unsupported SNAP OUI %02X-%02X-%02X " "on interface %s!\n", wanrouter_modname, skb->data[cnt+1], skb->data[cnt+2], skb->data[cnt+3], dev->name); return 0; } ethertype = *((__be16*)&skb->data[cnt+4]); cnt += 6; break; /* add other protocols, e.g. CLNP, ESIS, ISIS, if needed */ default: printk(KERN_INFO "%s: unsupported NLPID 0x%02X on interface %s!\n", wanrouter_modname, skb->data[cnt], dev->name); return 0; } skb->protocol = ethertype; skb->pkt_type = PACKET_HOST; /* Physically point to point */ skb_pull(skb, cnt); skb_reset_mac_header(skb); return ethertype; } #endif /* 0 */ /* * WAN device IOCTL. * o find WAN device associated with this node * o execute requested action or pass command to the device driver */ long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct inode *inode = file->f_path.dentry->d_inode; int err = 0; struct proc_dir_entry *dent; struct wan_device *wandev; void __user *data = (void __user *)arg; if (!capable(CAP_NET_ADMIN)) return -EPERM; if ((cmd >> 8) != ROUTER_IOCTL) return -EINVAL; dent = PDE(inode); if ((dent == NULL) || (dent->data == NULL)) return -EINVAL; wandev = dent->data; if (wandev->magic != ROUTER_MAGIC) return -EINVAL; lock_kernel(); switch (cmd) { case ROUTER_SETUP: err = wanrouter_device_setup(wandev, data); break; case ROUTER_DOWN: err = wanrouter_device_shutdown(wandev); break; case ROUTER_STAT: err = wanrouter_device_stat(wandev, data); break; case ROUTER_IFNEW: err = wanrouter_device_new_if(wandev, data); break; case ROUTER_IFDEL: err = wanrouter_device_del_if(wandev, data); break; case ROUTER_IFSTAT: break; default: if ((cmd >= ROUTER_USER) && (cmd <= ROUTER_USER_MAX) && wandev->ioctl) err = wandev->ioctl(wandev, cmd, arg); else err = -EINVAL; } unlock_kernel(); return err; } /* * WAN Driver IOCTL Handlers */ /* * Setup WAN link device. * o verify user address space * o allocate kernel memory and copy configuration data to kernel space * o if configuration data includes extension, copy it to kernel space too * o call driver's setup() entry point */ static int wanrouter_device_setup(struct wan_device *wandev, wandev_conf_t __user *u_conf) { void *data = NULL; wandev_conf_t *conf; int err = -EINVAL; if (wandev->setup == NULL) { /* Nothing to do ? */ printk(KERN_INFO "%s: ERROR, No setup script: wandev->setup()\n", wandev->name); return 0; } conf = kmalloc(sizeof(wandev_conf_t), GFP_KERNEL); if (conf == NULL){ printk(KERN_INFO "%s: ERROR, Failed to allocate kernel memory !\n", wandev->name); return -ENOBUFS; } if (copy_from_user(conf, u_conf, sizeof(wandev_conf_t))) { printk(KERN_INFO "%s: Failed to copy user config data to kernel space!\n", wandev->name); kfree(conf); return -EFAULT; } if (conf->magic != ROUTER_MAGIC) { kfree(conf); printk(KERN_INFO "%s: ERROR, Invalid MAGIC Number\n", wandev->name); return -EINVAL; } if (conf->data_size && conf->data) { if (conf->data_size > 128000) { printk(KERN_INFO "%s: ERROR, Invalid firmware data size %i !\n", wandev->name, conf->data_size); kfree(conf); return -EINVAL; } data = vmalloc(conf->data_size); if (!data) { printk(KERN_INFO "%s: ERROR, Faild allocate kernel memory !\n", wandev->name); kfree(conf); return -ENOBUFS; } if (!copy_from_user(data, conf->data, conf->data_size)) { conf->data = data; err = wandev->setup(wandev, conf); } else { printk(KERN_INFO "%s: ERROR, Faild to copy from user data !\n", wandev->name); err = -EFAULT; } vfree(data); } else { printk(KERN_INFO "%s: ERROR, No firmware found ! Firmware size = %i !\n", wandev->name, conf->data_size); } kfree(conf); return err; } /* * Shutdown WAN device. * o delete all not opened logical channels for this device * o call driver's shutdown() entry point */ static int wanrouter_device_shutdown(struct wan_device *wandev) { struct net_device *dev; int err=0; if (wandev->state == WAN_UNCONFIGURED) return 0; printk(KERN_INFO "\n%s: Shutting Down!\n",wandev->name); for (dev = wandev->dev; dev;) { err = wanrouter_delete_interface(wandev, dev->name); if (err) return err; /* The above function deallocates the current dev * structure. Therefore, we cannot use netdev_priv(dev) * as the next element: wandev->dev points to the * next element */ dev = wandev->dev; } if (wandev->ndev) return -EBUSY; /* there are opened interfaces */ if (wandev->shutdown) err=wandev->shutdown(wandev); return err; } /* * Get WAN device status & statistics. */ static int wanrouter_device_stat(struct wan_device *wandev, wandev_stat_t __user *u_stat) { wandev_stat_t stat; memset(&stat, 0, sizeof(stat)); /* Ask device driver to update device statistics */ if ((wandev->state != WAN_UNCONFIGURED) && wandev->update) wandev->update(wandev); /* Fill out structure */ stat.ndev = wandev->ndev; stat.state = wandev->state; if (copy_to_user(u_stat, &stat, sizeof(stat))) return -EFAULT; return 0; } /* * Create new WAN interface. * o verify user address space * o copy configuration data to kernel address space * o allocate network interface data space * o call driver's new_if() entry point * o make sure there is no interface name conflict * o register network interface */ static int wanrouter_device_new_if(struct wan_device *wandev, wanif_conf_t __user *u_conf) { wanif_conf_t *cnf; struct net_device *dev = NULL; int err; if ((wandev->state == WAN_UNCONFIGURED) || (wandev->new_if == NULL)) return -ENODEV; cnf = kmalloc(sizeof(wanif_conf_t), GFP_KERNEL); if (!cnf) return -ENOBUFS; err = -EFAULT; if (copy_from_user(cnf, u_conf, sizeof(wanif_conf_t))) goto out; err = -EINVAL; if (cnf->magic != ROUTER_MAGIC) goto out; if (cnf->config_id == WANCONFIG_MPPP) { printk(KERN_INFO "%s: Wanpipe Mulit-Port PPP support has not been compiled in!\n", wandev->name); err = -EPROTONOSUPPORT; goto out; } else { err = wandev->new_if(wandev, dev, cnf); } if (!err) { /* Register network interface. This will invoke init() * function supplied by the driver. If device registered * successfully, add it to the interface list. */ #ifdef WANDEBUG printk(KERN_INFO "%s: registering interface %s...\n", wanrouter_modname, dev->name); #endif err = register_netdev(dev); if (!err) { struct net_device *slave = NULL; unsigned long smp_flags=0; lock_adapter_irq(&wandev->lock, &smp_flags); if (wandev->dev == NULL) { wandev->dev = dev; } else { for (slave=wandev->dev; DEV_TO_SLAVE(slave); slave = DEV_TO_SLAVE(slave)) DEV_TO_SLAVE(slave) = dev; } ++wandev->ndev; unlock_adapter_irq(&wandev->lock, &smp_flags); err = 0; /* done !!! */ goto out; } if (wandev->del_if) wandev->del_if(wandev, dev); free_netdev(dev); } out: kfree(cnf); return err; } /* * Delete WAN logical channel. * o verify user address space * o copy configuration data to kernel address space */ static int wanrouter_device_del_if(struct wan_device *wandev, char __user *u_name) { char name[WAN_IFNAME_SZ + 1]; int err = 0; if (wandev->state == WAN_UNCONFIGURED) return -ENODEV; memset(name, 0, sizeof(name)); if (copy_from_user(name, u_name, WAN_IFNAME_SZ)) return -EFAULT; err = wanrouter_delete_interface(wandev, name); if (err) return err; /* If last interface being deleted, shutdown card * This helps with administration at leaf nodes * (You can tell if the person at the other end of the phone * has an interface configured) and avoids DoS vulnerabilities * in binary driver files - this fixes a problem with the current * Sangoma driver going into strange states when all the network * interfaces are deleted and the link irrecoverably disconnected. */ if (!wandev->ndev && wandev->shutdown) err = wandev->shutdown(wandev); return err; } /* * Miscellaneous Functions */ /* * Find WAN device by name. * Return pointer to the WAN device data space or NULL if device not found. */ static struct wan_device *wanrouter_find_device(char *name) { struct wan_device *wandev; for (wandev = wanrouter_router_devlist; wandev && strcmp(wandev->name, name); wandev = wandev->next); return wandev; } /* * Delete WAN logical channel identified by its name. * o find logical channel by its name * o call driver's del_if() entry point * o unregister network interface * o unlink channel data space from linked list of channels * o release channel data space * * Return: 0 success * -ENODEV channel not found. * -EBUSY interface is open * * Note: If (force != 0), then device will be destroyed even if interface * associated with it is open. It's caller's responsibility to make * sure that opened interfaces are not removed! */ static int wanrouter_delete_interface(struct wan_device *wandev, char *name) { struct net_device *dev = NULL, *prev = NULL; unsigned long smp_flags=0; lock_adapter_irq(&wandev->lock, &smp_flags); dev = wandev->dev; prev = NULL; while (dev && strcmp(name, dev->name)) { struct net_device **slave = netdev_priv(dev); prev = dev; dev = *slave; } unlock_adapter_irq(&wandev->lock, &smp_flags); if (dev == NULL) return -ENODEV; /* interface not found */ if (netif_running(dev)) return -EBUSY; /* interface in use */ if (wandev->del_if) wandev->del_if(wandev, dev); lock_adapter_irq(&wandev->lock, &smp_flags); if (prev) { struct net_device **prev_slave = netdev_priv(prev); struct net_device **slave = netdev_priv(dev); *prev_slave = *slave; } else { struct net_device **slave = netdev_priv(dev); wandev->dev = *slave; } --wandev->ndev; unlock_adapter_irq(&wandev->lock, &smp_flags); printk(KERN_INFO "%s: unregistering '%s'\n", wandev->name, dev->name); unregister_netdev(dev); free_netdev(dev); return 0; } static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) __acquires(lock) { spin_lock_irqsave(lock, *smp_flags); } static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) __releases(lock) { spin_unlock_irqrestore(lock, *smp_flags); } EXPORT_SYMBOL(register_wan_device); EXPORT_SYMBOL(unregister_wan_device); MODULE_LICENSE("GPL"); /* * End */