/* * Device Tree for DA850 EVM board * * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation, version 2. */ /dts-v1/; /include/ "da850.dtsi" / { compatible = "ti,da850-evm", "ti,da850"; model = "DA850/AM1808/OMAP-L138 EVM"; soc { pmx_core: pinmux@1c14120 { status = "okay"; }; serial0: serial@1c42000 { status = "okay"; }; serial1: serial@1d0c000 { status = "okay"; }; serial2: serial@1d0d000 { status = "okay"; }; rtc0: rtc@1c23000 { status = "okay"; }; i2c0: i2c@1c22000 { status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; tps: tps@48 { reg = <0x48>; }; }; wdt: wdt@1c21000 { status = "okay"; }; mmc0: mmc@1c40000 { max-frequency = <50000000>; bus-width = <4>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; }; spi1: spi@1f0e000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64"; spi-max-frequency = <30000000>; m25p,fast-read; reg = <0>; partition@0 { label = "U-Boot-SPL"; reg = <0x00000000 0x00010000>; read-only; }; partition@1 { label = "U-Boot"; reg = <0x00010000 0x00080000>; read-only; }; partition@2 { label = "U-Boot-Env"; reg = <0x00090000 0x00010000>; read-only; }; partition@3 { label = "Kernel"; reg = <0x000a0000 0x00280000>; }; partition@4 { label = "Filesystem"; reg = <0x00320000 0x00400000>; }; partition@5 { label = "MAC-Address"; reg = <0x007f0000 0x00010000>; read-only; }; }; }; }; nand_cs3@62000000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_cs3_pins>; }; vbat: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-boot-on; }; }; /include/ "tps6507x.dtsi" &tps { vdcdc1_2-supply = <&vbat>; vdcdc3-supply = <&vbat>; vldo1_2-supply = <&vbat>; regulators { vdcdc1_reg: regulator@0 { regulator-name = "VDCDC1_3.3V"; regulator-min-microvolt = <3150000>; regulator-max-microvolt = <3450000>; regulator-always-on; regulator-boot-on; }; vdcdc2_reg: regulator@1 { regulator-name = "VDCDC2_3.3V"; regulator-min-microvolt = <1710000>; regulator-max-microvolt = <3450000>; regulator-always-on; regulator-boot-on; ti,defdcdc_default = <1>; }; vdcdc3_reg: regulator@2 { regulator-name = "VDCDC3_1.2V"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; ti,defdcdc_default = <1>; }; ldo1_reg: regulator@3 { regulator-name = "LDO1_1.8V"; regulator-min-microvolt = <1710000>; regulator-max-microvolt = <1890000>; regulator-always-on; regulator-boot-on; }; ldo2_reg: regulator@4 { regulator-name = "LDO2_1.2V"; regulator-min-microvolt = <1140000>; regulator-max-microvolt = <1320000>; regulator-always-on; regulator-boot-on; }; }; };