/*------------------------------------------------------------------------------------------*\
 *
 * Hardware Config für FRITZ!Box Fon 7412
 *
\*------------------------------------------------------------------------------------------*/
#ERROR "Diese Datei darf nicht mehr verwendet werden. Bitte Änderungen in der entsprechenden .dts Datei vornehmen"

#undef AVM_HARDWARE_CONFIG
#define AVM_HARDWARE_CONFIG  

struct _avm_hw_config avm_hardware_config_hw209[] = {


    /****************************************************************************************\
     *
     * GPIO Config
     *
    \****************************************************************************************/


    /*------------------------------------------------------------------------------------------*\
     * LEDs / Taster
    \*------------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_led_power",
        .value  = 6,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },
    {
        .name   = "gpio_avm_led_power_red",
        .value  = 5,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },
    {
        .name   = "gpio_avm_led_internet",
        .value  = 34,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },
    {
        .name   = "gpio_avm_led_dect",
        .value  = 15,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },
    {
        .name   = "gpio_avm_led_wlan",
        .value  = 0,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },
    {
        .name   = "gpio_avm_led_info",
        .value  = 35,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET
        }
    },

    /*--- DECT button connected to EXTIN 2 ---*/
    {
        .name   = "gpio_avm_button_dect",
        .value  = 2,
        .param  = avm_hw_param_gpio_in_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN  | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR   | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET 
        }
    },
    /*--- WLAN button connected to EXTIN 1 ---*/
    {
        .name   = "gpio_avm_button_wlan",
        .value  = 1,
        .param  = avm_hw_param_gpio_in_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_LED,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN  | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET   | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR 
        }
    },
    /*--------------------------------------------------------------------------------------*\
     * DECT
    \*--------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_dect_reset",
        .value  = 33,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_PIGLET,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },
    /*--------------------------------------------------------------------------------*\
     * TDM-Check (Clockmessung)
    \*--------------------------------------------------------------------------------*/
    { 
        .name   = "gpio_avm_tdm_fsc",              
        .value  = 9,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_TDMCHECK,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_SET
        }
    },
    {
        .name   = "gpio_avm_tdm_dcl",
        .value  = 18,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_TDMCHECK,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_SET 
        }
    },
    {
        .name   = "gpio_avm_tdm_enable_dcl",
        .value  = 7,
        .param  = avm_hw_param_gpio_out_active_high,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_TDMCHECK,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET
        }
    },
    /*--------------------------------------------------------------------------------------*\
     * SPI-TDM
    \*--------------------------------------------------------------------------------------*/
    { 
        .name   = "gpio_avm_pcmlink_fsc",              
        .value  = 9,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_PCMLINK,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_SET
        }
    },
    {
        .name   = "gpio_avm_pcmlink_do",
        .value  = 16,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_PCMLINK,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_CLEAR 
        }
    },
    {
        .name   = "gpio_avm_pcmlink_di",
        .value  = 17,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_PCMLINK,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET | IFX_GPIO_IOCTL_PIN_CONFIG_OD_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_SET 
        }
    },
    {
        .name   = "gpio_avm_pcmlink_dcl",
        .value  = 18,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_PCMLINK,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_SET 
        }
    },
    {
        .name   = "gpio_avm_pcmlink_clk_enable",
        .value  = 7,
        .param  = avm_hw_param_gpio_out_active_high,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_PCMLINK,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET
        }
    },
    {
        .name   = "gpio_avm_pcmlink_flash_cs",
        .value  = 10,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_PCMLINK,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },
    /*--------------------------------------------------------------------------------------*\
     * SPI
    \*--------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_pcmlink_flash_wp",
        .value  = 12,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_SSC,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },
    /*--------------------------------------------------------------------------------------*\
     * SPI
    \*--------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_spi_clk",
        .value  = 18,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_SSC,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },
    {
        .name   = "gpio_avm_spi_do",
        .value  = 17,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_SSC,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },
    {
        .name   = "gpio_avm_spi_di",
        .value  = 16,
        .param  = avm_hw_param_no_param,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_SSC,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },
    {
        .name   = "gpio_avm_spi_flash_cs",
        .value  = 10,
        .param  = avm_hw_param_gpio_out_active_high,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_SSC,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET
        }
    },


    /*--------------------------------------------------------------------------------------*\
     * NAND
    \*--------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_nand_ale",
        .value  = 13,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_NAND,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },
    {
        .name   = "gpio_avm_nand_cle",
        .value  = 24,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_NAND,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },
    {
        .name   = "gpio_avm_nand_rd",
        .value  = 49, /*--- liegt zusammen mit Boot-Select 4 ---*/
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_NAND,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR
        }
    },


    /*--------------------------------------------------------------------------------------*\
     * PCIE / WLAN / Ext. WASP
    \*--------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_pcie_reset0",
        .value  = 11,
        .param  = avm_hw_param_gpio_out_active_low,
        .manufactor_hw_config.manufactor_lantiq_gpio_config = {
            .module_id = IFX_GPIO_MODULE_PCIE,
            .config    = IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET 
        }
    },


    /*--------------------------------------------------------------------------------------*\
     * SYSTEM
    \*--------------------------------------------------------------------------------------*/
    {
        .name   = "gpio_avm_boot_sel2",
        .value  =  23,
        .param  = avm_hw_param_gpio_in_active_high,
    },
    {
        .name   = "gpio_avm_boot_sel3",
        .value  =  38,
        .param  = avm_hw_param_gpio_in_active_high,
    },
    {
        .name   = "gpio_avm_boot_sel4",
        .value  =  49, /*--- liegt zusammen mit NAND_RD ---*/
        .param  = avm_hw_param_gpio_in_active_high,
    },





    {   .name   = NULL }
};

EXPORT_SYMBOL(avm_hardware_config_hw209);