/* * TAS5086 ASoC codec driver * * Copyright (c) 2013 Daniel Mack * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * TODO: * - implement DAPM and input muxing * - implement modulation limit * - implement non-default PWM start * * Note that this chip has a very unusual register layout, specifically * because the registers are of unequal size, and multi-byte registers * require bulk writes to take effect. Regmap does not support that kind * of devices. * * Currently, the driver does not touch any of the registers >= 0x20, so * it doesn't matter because the entire map can be accessed as 8-bit * array. In case more features will be added in the future * that require access to higher registers, the entire regmap H/W I/O * routines have to be open-coded. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ SNDRV_PCM_FMTBIT_S20_3LE | \ SNDRV_PCM_FMTBIT_S24_3LE) #define TAS5086_PCM_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \ SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ SNDRV_PCM_RATE_192000) /* * TAS5086 registers */ #define TAS5086_CLOCK_CONTROL 0x00 /* Clock control register */ #define TAS5086_CLOCK_RATE(val) (val << 5) #define TAS5086_CLOCK_RATE_MASK (0x7 << 5) #define TAS5086_CLOCK_RATIO(val) (val << 2) #define TAS5086_CLOCK_RATIO_MASK (0x7 << 2) #define TAS5086_CLOCK_SCLK_RATIO_48 (1 << 1) #define TAS5086_CLOCK_VALID (1 << 0) #define TAS5086_DEEMPH_MASK 0x03 #define TAS5086_SOFT_MUTE_ALL 0x3f #define TAS5086_DEV_ID 0x01 /* Device ID register */ #define TAS5086_ERROR_STATUS 0x02 /* Error status register */ #define TAS5086_SYS_CONTROL_1 0x03 /* System control register 1 */ #define TAS5086_SERIAL_DATA_IF 0x04 /* Serial data interface register */ #define TAS5086_SYS_CONTROL_2 0x05 /* System control register 2 */ #define TAS5086_SOFT_MUTE 0x06 /* Soft mute register */ #define TAS5086_MASTER_VOL 0x07 /* Master volume */ #define TAS5086_CHANNEL_VOL(X) (0x08 + (X)) /* Channel 1-6 volume */ #define TAS5086_VOLUME_CONTROL 0x09 /* Volume control register */ #define TAS5086_MOD_LIMIT 0x10 /* Modulation limit register */ #define TAS5086_PWM_START 0x18 /* PWM start register */ #define TAS5086_SURROUND 0x19 /* Surround register */ #define TAS5086_SPLIT_CAP_CHARGE 0x1a /* Split cap charge period register */ #define TAS5086_OSC_TRIM 0x1b /* Oscillator trim register */ #define TAS5086_BKNDERR 0x1c /* * Default TAS5086 power-up configuration */ static const struct reg_default tas5086_reg_defaults[] = { { 0x00, 0x6c }, { 0x01, 0x03 }, { 0x02, 0x00 }, { 0x03, 0xa0 }, { 0x04, 0x05 }, { 0x05, 0x60 }, { 0x06, 0x00 }, { 0x07, 0xff }, { 0x08, 0x30 }, { 0x09, 0x30 }, { 0x0a, 0x30 }, { 0x0b, 0x30 }, { 0x0c, 0x30 }, { 0x0d, 0x30 }, { 0x0e, 0xb1 }, { 0x0f, 0x00 }, { 0x10, 0x02 }, { 0x11, 0x00 }, { 0x12, 0x00 }, { 0x13, 0x00 }, { 0x14, 0x00 }, { 0x15, 0x00 }, { 0x16, 0x00 }, { 0x17, 0x00 }, { 0x18, 0x3f }, { 0x19, 0x00 }, { 0x1a, 0x18 }, { 0x1b, 0x82 }, { 0x1c, 0x05 }, }; static bool tas5086_accessible_reg(struct device *dev, unsigned int reg) { return !((reg == 0x0f) || (reg >= 0x11 && reg <= 0x17)); } static bool tas5086_volatile_reg(struct device *dev, unsigned int reg) { switch (reg) { case TAS5086_DEV_ID: case TAS5086_ERROR_STATUS: return true; } return false; } static bool tas5086_writeable_reg(struct device *dev, unsigned int reg) { return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID); } struct tas5086_private { struct regmap *regmap; unsigned int mclk, sclk; unsigned int format; bool deemph; /* Current sample rate for de-emphasis control */ int rate; /* GPIO driving Reset pin, if any */ int gpio_nreset; }; static int tas5086_deemph[] = { 0, 32000, 44100, 48000 }; static int tas5086_set_deemph(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int i, val = 0; if (priv->deemph) for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) if (tas5086_deemph[i] == priv->rate) val = i; return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1, TAS5086_DEEMPH_MASK, val); } static int tas5086_get_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); ucontrol->value.integer.value[0] = priv->deemph; return 0; } static int tas5086_put_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); priv->deemph = ucontrol->value.integer.value[0]; return tas5086_set_deemph(codec); } static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id, unsigned int freq, int dir) { struct snd_soc_codec *codec = codec_dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); switch (clk_id) { case TAS5086_CLK_IDX_MCLK: priv->mclk = freq; break; case TAS5086_CLK_IDX_SCLK: priv->sclk = freq; break; } return 0; } static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int format) { struct snd_soc_codec *codec = codec_dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); /* The TAS5086 can only be slave to all clocks */ if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) { dev_err(codec->dev, "Invalid clocking mode\n"); return -EINVAL; } /* we need to refer to the data format from hw_params() */ priv->format = format; return 0; } static const int tas5086_sample_rates[] = { 32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000 }; static const int tas5086_ratios[] = { 64, 128, 192, 256, 384, 512 }; static int index_in_array(const int *array, int len, int needle) { int i; for (i = 0; i < len; i++) if (array[i] == needle) return i; return -ENOENT; } static int tas5086_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { struct snd_soc_codec *codec = dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int val; int ret; priv->rate = params_rate(params); /* Look up the sample rate and refer to the offset in the list */ val = index_in_array(tas5086_sample_rates, ARRAY_SIZE(tas5086_sample_rates), priv->rate); if (val < 0) { dev_err(codec->dev, "Invalid sample rate\n"); return -EINVAL; } ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_RATE_MASK, TAS5086_CLOCK_RATE(val)); if (ret < 0) return ret; /* MCLK / Fs ratio */ val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios), priv->mclk / priv->rate); if (val < 0) { dev_err(codec->dev, "Inavlid MCLK / Fs ratio\n"); return -EINVAL; } ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_RATIO_MASK, TAS5086_CLOCK_RATIO(val)); if (ret < 0) return ret; ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_SCLK_RATIO_48, (priv->sclk == 48 * priv->rate) ? TAS5086_CLOCK_SCLK_RATIO_48 : 0); if (ret < 0) return ret; /* * The chip has a very unituitive register mapping and muxes information * about data format and sample depth into the same register, but not on * a logical bit-boundary. Hence, we have to refer to the format passed * in the set_dai_fmt() callback and set up everything from here. * * First, determine the 'base' value, using the format ... */ switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_RIGHT_J: val = 0x00; break; case SND_SOC_DAIFMT_I2S: val = 0x03; break; case SND_SOC_DAIFMT_LEFT_J: val = 0x06; break; default: dev_err(codec->dev, "Invalid DAI format\n"); return -EINVAL; } /* ... then add the offset for the sample bit depth. */ switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: val += 0; break; case SNDRV_PCM_FORMAT_S20_3LE: val += 1; break; case SNDRV_PCM_FORMAT_S24_3LE: val += 2; break; default: dev_err(codec->dev, "Invalid bit width\n"); return -EINVAL; }; ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val); if (ret < 0) return ret; /* clock is considered valid now */ ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID); if (ret < 0) return ret; return tas5086_set_deemph(codec); } static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream) { struct snd_soc_codec *codec = dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); unsigned int val = 0; if (mute) val = TAS5086_SOFT_MUTE_ALL; return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val); } /* TAS5086 controls */ static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1); static const struct snd_kcontrol_new tas5086_controls[] = { SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL, 0, 0xff, 1, tas5086_dac_tlv), SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume", TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1), 0, 0xff, 1, tas5086_dac_tlv), SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume", TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3), 0, 0xff, 1, tas5086_dac_tlv), SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume", TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5), 0, 0xff, 1, tas5086_dac_tlv), SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0, tas5086_get_deemph, tas5086_put_deemph), }; static const struct snd_soc_dai_ops tas5086_dai_ops = { .hw_params = tas5086_hw_params, .set_sysclk = tas5086_set_dai_sysclk, .set_fmt = tas5086_set_dai_fmt, .mute_stream = tas5086_mute_stream, }; static struct snd_soc_dai_driver tas5086_dai = { .name = "tas5086-hifi", .playback = { .stream_name = "Playback", .channels_min = 2, .channels_max = 6, .rates = TAS5086_PCM_RATES, .formats = TAS5086_PCM_FORMATS, }, .ops = &tas5086_dai_ops, }; #ifdef CONFIG_PM static int tas5086_soc_resume(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); /* Restore codec state */ return regcache_sync(priv->regmap); } #else #define tas5086_soc_resume NULL #endif /* CONFIG_PM */ #ifdef CONFIG_OF static const struct of_device_id tas5086_dt_ids[] = { { .compatible = "ti,tas5086", }, { } }; MODULE_DEVICE_TABLE(of, tas5086_dt_ids); #endif /* charge period values in microseconds */ static const int tas5086_charge_period[] = { 13000, 16900, 23400, 31200, 41600, 54600, 72800, 96200, 130000, 156000, 234000, 312000, 416000, 546000, 728000, 962000, 1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000, }; static int tas5086_probe(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int charge_period = 1300000; /* hardware default is 1300 ms */ int i, ret; if (of_match_device(of_match_ptr(tas5086_dt_ids), codec->dev)) { struct device_node *of_node = codec->dev->of_node; of_property_read_u32(of_node, "ti,charge-period", &charge_period); } /* lookup and set split-capacitor charge period */ if (charge_period == 0) { regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0); } else { i = index_in_array(tas5086_charge_period, ARRAY_SIZE(tas5086_charge_period), charge_period); if (i >= 0) regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, i + 0x08); else dev_warn(codec->dev, "Invalid split-cap charge period of %d ns.\n", charge_period); } /* enable factory trim */ ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00); if (ret < 0) return ret; /* start all channels */ ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20); if (ret < 0) return ret; /* set master volume to 0 dB */ ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30); if (ret < 0) return ret; /* mute all channels for now */ ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE, TAS5086_SOFT_MUTE_ALL); if (ret < 0) return ret; return 0; } static int tas5086_remove(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); if (gpio_is_valid(priv->gpio_nreset)) /* Set codec to the reset state */ gpio_set_value(priv->gpio_nreset, 0); return 0; }; static struct snd_soc_codec_driver soc_codec_dev_tas5086 = { .probe = tas5086_probe, .remove = tas5086_remove, .resume = tas5086_soc_resume, .controls = tas5086_controls, .num_controls = ARRAY_SIZE(tas5086_controls), }; static const struct i2c_device_id tas5086_i2c_id[] = { { "tas5086", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id); static const struct regmap_config tas5086_regmap = { .reg_bits = 8, .val_bits = 8, .max_register = ARRAY_SIZE(tas5086_reg_defaults), .reg_defaults = tas5086_reg_defaults, .num_reg_defaults = ARRAY_SIZE(tas5086_reg_defaults), .cache_type = REGCACHE_RBTREE, .volatile_reg = tas5086_volatile_reg, .writeable_reg = tas5086_writeable_reg, .readable_reg = tas5086_accessible_reg, }; static int tas5086_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct tas5086_private *priv; struct device *dev = &i2c->dev; int gpio_nreset = -EINVAL; int i, ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->regmap = devm_regmap_init_i2c(i2c, &tas5086_regmap); if (IS_ERR(priv->regmap)) { ret = PTR_ERR(priv->regmap); dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); return ret; } i2c_set_clientdata(i2c, priv); if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) { struct device_node *of_node = dev->of_node; gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0); } if (gpio_is_valid(gpio_nreset)) if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset")) gpio_nreset = -EINVAL; if (gpio_is_valid(gpio_nreset)) { /* Reset codec - minimum assertion time is 400ns */ gpio_direction_output(gpio_nreset, 0); udelay(1); gpio_set_value(gpio_nreset, 1); /* Codec needs ~15ms to wake up */ msleep(15); } priv->gpio_nreset = gpio_nreset; /* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */ ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i); if (ret < 0) return ret; if (i != 0x3) { dev_err(dev, "Failed to identify TAS5086 codec (got %02x)\n", i); return -ENODEV; } return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_tas5086, &tas5086_dai, 1); } static int tas5086_i2c_remove(struct i2c_client *i2c) { snd_soc_unregister_codec(&i2c->dev); return 0; } static struct i2c_driver tas5086_i2c_driver = { .driver = { .name = "tas5086", .owner = THIS_MODULE, .of_match_table = of_match_ptr(tas5086_dt_ids), }, .id_table = tas5086_i2c_id, .probe = tas5086_i2c_probe, .remove = tas5086_i2c_remove, }; module_i2c_driver(tas5086_i2c_driver); MODULE_AUTHOR("Daniel Mack "); MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver"); MODULE_LICENSE("GPL");