--- zzzz-none-000/linux-3.10.107/drivers/cpufreq/elanfreq.c	2017-06-27 09:49:32.000000000 +0000
+++ vr9-7490-729/linux-3.10.107/drivers/cpufreq/elanfreq.c	2021-11-10 11:53:55.000000000 +0000
@@ -105,32 +105,9 @@
 }
 
 
-/**
- *	elanfreq_set_cpu_frequency: Change the CPU core frequency
- *	@cpu: cpu number
- *	@freq: frequency in kHz
- *
- *	This function takes a frequency value and changes the CPU frequency
- *	according to this. Note that the frequency has to be checked by
- *	elanfreq_validatespeed() for correctness!
- *
- *	There is no return value.
- */
-
-static void elanfreq_set_cpu_state(struct cpufreq_policy *policy,
-		unsigned int state)
+static int elanfreq_target(struct cpufreq_policy *policy,
+			    unsigned int state)
 {
-	struct cpufreq_freqs    freqs;
-
-	freqs.old = elanfreq_get_cpu_frequency(0);
-	freqs.new = elan_multiplier[state].clock;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
-	printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
-			elan_multiplier[state].clock);
-
-
 	/*
 	 * Access to the Elan's internal registers is indexed via
 	 * 0x22: Chip Setup & Control Register Index Register (CSCI)
@@ -161,39 +138,8 @@
 	udelay(10000);
 	local_irq_enable();
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-};
-
-
-/**
- *	elanfreq_validatespeed: test if frequency range is valid
- *	@policy: the policy to validate
- *
- *	This function checks if a given frequency range in kHz is valid
- *	for the hardware supported by the driver.
- */
-
-static int elanfreq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
-}
-
-static int elanfreq_target(struct cpufreq_policy *policy,
-			    unsigned int target_freq,
-			    unsigned int relation)
-{
-	unsigned int newstate = 0;
-
-	if (cpufreq_frequency_table_target(policy, &elanfreq_table[0],
-				target_freq, relation, &newstate))
-		return -EINVAL;
-
-	elanfreq_set_cpu_state(policy, newstate);
-
 	return 0;
 }
-
-
 /*
  *	Module init and exit code
  */
@@ -202,7 +148,6 @@
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	unsigned int i;
-	int result;
 
 	/* capability check */
 	if ((c->x86_vendor != X86_VENDOR_AMD) ||
@@ -221,21 +166,8 @@
 
 	/* cpuinfo and default policy values */
 	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	policy->cur = elanfreq_get_cpu_frequency(0);
-
-	result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
-	if (result)
-		return result;
 
-	cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
-	return 0;
-}
-
-
-static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
+	return cpufreq_table_validate_and_show(policy, elanfreq_table);
 }
 
 
@@ -261,21 +193,14 @@
 #endif
 
 
-static struct freq_attr *elanfreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-
 static struct cpufreq_driver elanfreq_driver = {
 	.get		= elanfreq_get_cpu_frequency,
-	.verify		= elanfreq_verify,
-	.target		= elanfreq_target,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= elanfreq_target,
 	.init		= elanfreq_cpu_init,
-	.exit		= elanfreq_cpu_exit,
+	.exit		= cpufreq_generic_exit,
 	.name		= "elanfreq",
-	.owner		= THIS_MODULE,
-	.attr		= elanfreq_attr,
+	.attr		= cpufreq_generic_attr,
 };
 
 static const struct x86_cpu_id elan_id[] = {