--- zzzz-none-000/linux-3.10.107/include/linux/clk-provider.h 2017-06-27 09:49:32.000000000 +0000 +++ vr9-7490-729/linux-3.10.107/include/linux/clk-provider.h 2021-11-10 11:53:56.000000000 +0000 @@ -12,6 +12,7 @@ #define __LINUX_CLK_PROVIDER_H #include +#include #ifdef CONFIG_COMMON_CLK @@ -27,6 +28,8 @@ #define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ #define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */ #define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */ +#define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */ +#define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */ struct clk_hw; @@ -79,6 +82,10 @@ * @round_rate: Given a target rate as input, returns the closest rate actually * supported by the clock. * + * @determine_rate: Given a target rate as input, returns the closest rate + * actually supported by the clock, and optionally the parent clock + * that should be used to provide the clock rate. + * * @get_parent: Queries the hardware to determine the parent of a clock. The * return value is a u8 which specifies the index corresponding to * the parent clock. This index can be applied to either the @@ -102,6 +109,25 @@ * which is likely helpful for most .set_rate implementation. * Returns 0 on success, -EERROR otherwise. * + * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy + * is expressed in ppb (parts per billion). The parent accuracy is + * an input parameter. + * Returns the calculated accuracy. Optional - if this op is not + * set then clock accuracy will be initialized to parent accuracy + * or 0 (perfect clock) if clock has no parent. + * + * @set_rate_and_parent: Change the rate and the parent of this clock. The + * requested rate is specified by the second argument, which + * should typically be the return of .round_rate call. The + * third argument gives the parent rate which is likely helpful + * for most .set_rate_and_parent implementation. The fourth + * argument gives the parent index. This callback is optional (and + * unnecessary) for clocks with 0 or 1 parents as well as + * for clocks that can tolerate switching the rate and the parent + * separately via calls to .set_parent and .set_rate. + * Returns 0 on success, -EERROR otherwise. + * + * * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow * implementations to split any work between atomic (enable) and sleepable * (prepare) contexts. If enabling a clock requires code that might sleep, @@ -126,10 +152,19 @@ unsigned long parent_rate); long (*round_rate)(struct clk_hw *hw, unsigned long, unsigned long *); + long (*determine_rate)(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_clk); int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); + struct clk *(*get_safe_parent)(struct clk_hw *hw); int (*set_rate)(struct clk_hw *hw, unsigned long, unsigned long); + int (*set_rate_and_parent)(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, u8 index); + unsigned long (*recalc_accuracy)(struct clk_hw *hw, + unsigned long parent_accuracy); void (*init)(struct clk_hw *hw); }; @@ -185,6 +220,7 @@ struct clk_fixed_rate { struct clk_hw hw; unsigned long fixed_rate; + unsigned long fixed_accuracy; u8 flags; }; @@ -192,6 +228,9 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, const char *parent_name, unsigned long flags, unsigned long fixed_rate); +struct clk *clk_register_fixed_rate_with_accuracy(struct device *dev, + const char *name, const char *parent_name, unsigned long flags, + unsigned long fixed_rate, unsigned long fixed_accuracy); void of_fixed_clk_setup(struct device_node *np); @@ -210,6 +249,10 @@ * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to * enable the clock. Setting this flag does the opposite: setting the bit * disable the clock and clearing it enables the clock + * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit + * of this register, and mask of gate bits are in higher 16-bit of this + * register. While setting the gate bits, higher 16-bit should also be + * updated to indicate changing gate bits. */ struct clk_gate { struct clk_hw hw; @@ -220,6 +263,7 @@ }; #define CLK_GATE_SET_TO_DISABLE BIT(0) +#define CLK_GATE_HIWORD_MASK BIT(1) extern const struct clk_ops clk_gate_ops; struct clk *clk_register_gate(struct device *dev, const char *name, @@ -257,6 +301,10 @@ * Some hardware implementations gracefully handle this case and allow a * zero divisor by not modifying their input clock * (divide by one / bypass). + * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit + * of this register, and mask of divider bits are in higher 16-bit of this + * register. While setting the divider bits, higher 16-bit should also be + * updated to indicate changing divider bits. */ struct clk_divider { struct clk_hw hw; @@ -271,6 +319,7 @@ #define CLK_DIVIDER_ONE_BASED BIT(0) #define CLK_DIVIDER_POWER_OF_TWO BIT(1) #define CLK_DIVIDER_ALLOW_ZERO BIT(2) +#define CLK_DIVIDER_HIWORD_MASK BIT(3) extern const struct clk_ops clk_divider_ops; struct clk *clk_register_divider(struct device *dev, const char *name, @@ -299,6 +348,10 @@ * Flags: * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 * CLK_MUX_INDEX_BIT - register index is a single bit (power of two) + * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this + * register, and mask of mux bits are in higher 16-bit of this register. + * While setting the mux bits, higher 16-bit should also be updated to + * indicate changing mux bits. */ struct clk_mux { struct clk_hw hw; @@ -312,8 +365,11 @@ #define CLK_MUX_INDEX_ONE BIT(0) #define CLK_MUX_INDEX_BIT BIT(1) +#define CLK_MUX_HIWORD_MASK BIT(2) +#define CLK_MUX_READ_ONLY BIT(3) /* mux setting cannot be changed */ extern const struct clk_ops clk_mux_ops; +extern const struct clk_ops clk_mux_ro_ops; struct clk *clk_register_mux(struct device *dev, const char *name, const char **parent_names, u8 num_parents, unsigned long flags, @@ -403,13 +459,18 @@ struct clk_hw *__clk_get_hw(struct clk *clk); u8 __clk_get_num_parents(struct clk *clk); struct clk *__clk_get_parent(struct clk *clk); +struct clk *clk_get_parent_by_index(struct clk *clk, u8 index); unsigned int __clk_get_enable_count(struct clk *clk); unsigned int __clk_get_prepare_count(struct clk *clk); unsigned long __clk_get_rate(struct clk *clk); +unsigned long __clk_get_accuracy(struct clk *clk); unsigned long __clk_get_flags(struct clk *clk); bool __clk_is_prepared(struct clk *clk); bool __clk_is_enabled(struct clk *clk); struct clk *__clk_lookup(const char *name); +long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_p); /* * FIXME clock api without lock protection @@ -423,6 +484,19 @@ typedef void (*of_clk_init_cb_t)(struct device_node *); +struct clk_onecell_data { + struct clk **clks; + unsigned int clk_num; +}; + +extern struct of_device_id __clk_of_table; + +#define CLK_OF_DECLARE(name, compat, fn) \ + static const struct of_device_id __clk_of_table_##name \ + __used __section(__clk_of_table) \ + = { .compatible = compat, .data = fn }; + +#ifdef CONFIG_OF int of_clk_add_provider(struct device_node *np, struct clk *(*clk_src_get)(struct of_phandle_args *args, void *data), @@ -430,19 +504,72 @@ void of_clk_del_provider(struct device_node *np); struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, void *data); -struct clk_onecell_data { - struct clk **clks; - unsigned int clk_num; -}; struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data); +int of_clk_get_parent_count(struct device_node *np); const char *of_clk_get_parent_name(struct device_node *np, int index); void of_clk_init(const struct of_device_id *matches); -#define CLK_OF_DECLARE(name, compat, fn) \ - static const struct of_device_id __clk_of_table_##name \ - __used __section(__clk_of_table) \ - = { .compatible = compat, .data = fn }; +#else /* !CONFIG_OF */ + +static inline int of_clk_add_provider(struct device_node *np, + struct clk *(*clk_src_get)(struct of_phandle_args *args, + void *data), + void *data) +{ + return 0; +} +#define of_clk_del_provider(np) \ + { while (0); } +static inline struct clk *of_clk_src_simple_get( + struct of_phandle_args *clkspec, void *data) +{ + return ERR_PTR(-ENOENT); +} +static inline struct clk *of_clk_src_onecell_get( + struct of_phandle_args *clkspec, void *data) +{ + return ERR_PTR(-ENOENT); +} +static inline const char *of_clk_get_parent_name(struct device_node *np, + int index) +{ + return NULL; +} +#define of_clk_init(matches) \ + { while (0); } +#endif /* CONFIG_OF */ + +/* + * wrap access to peripherals in accessor routines + * for improved portability across platforms + */ + +#if IS_ENABLED(CONFIG_PPC) + +static inline u32 clk_readl(u32 __iomem *reg) +{ + return ioread32be(reg); +} + +static inline void clk_writel(u32 val, u32 __iomem *reg) +{ + iowrite32be(val, reg); +} + +#else /* platform dependent I/O accessors */ + +static inline u32 clk_readl(u32 __iomem *reg) +{ + return readl(reg); +} + +static inline void clk_writel(u32 val, u32 __iomem *reg) +{ + writel(val, reg); +} + +#endif /* platform dependent I/O accessors */ #endif /* CONFIG_COMMON_CLK */ #endif /* CLK_PROVIDER_H */