--- zzzz-none-000/linux-4.4.60/drivers/net/phy/Kconfig	2017-04-08 07:53:53.000000000 +0000
+++ wasp-540e-714/linux-4.4.60/drivers/net/phy/Kconfig	2019-07-03 09:21:34.000000000 +0000
@@ -12,6 +12,20 @@
 
 if PHYLIB
 
+config MDIO_BOARDINFO
+	bool
+	default y
+
+config SWCONFIG
+	tristate "Switch configuration API"
+	---help---
+	  Switch configuration API using netlink. This allows
+	  you to configure the VLAN features of certain switches.
+
+config SWCONFIG_LEDS
+	bool "Switch LED trigger support"
+	depends on (SWCONFIG && LEDS_TRIGGERS)
+
 comment "MII PHY device drivers"
 
 config AQUANTIA_PHY
@@ -33,7 +47,7 @@
 	tristate "Drivers for Marvell PHYs"
 	---help---
 	  Currently has a driver for the 88E1011S
-	
+
 config DAVICOM_PHY
 	tristate "Drivers for Davicom PHYs"
 	---help---
@@ -156,6 +170,38 @@
 	help
 	  Supports the LAN88XX PHYs.
 
+config ADM6996_PHY
+	tristate "Driver for ADM6996 switches"
+	select SWCONFIG
+	---help---
+	  Currently supports the ADM6996FC and ADM6996M switches.
+	  Support for FC is very limited.
+
+config MVSWITCH_PHY
+	tristate "Driver for Marvell 88E6060 switches"
+	select ETHERNET_PACKET_MANGLE
+
+config MVSW61XX_PHY
+	tristate "Driver for Marvell 88E6171/6172 switches"
+	select SWCONFIG
+
+config IP17XX_PHY
+	tristate "Driver for IC+ IP17xx switches"
+	select SWCONFIG
+
+config AR8216_PHY
+	tristate "Driver for Atheros AR8216 switches"
+	select ETHERNET_PACKET_MANGLE
+	select SWCONFIG
+
+config AR8216_PHY_LEDS
+	bool "Atheros AR8216 switch LED support"
+	depends on (AR8216_PHY && LEDS_CLASS)
+
+config RTL8306_PHY
+	tristate "Driver for Realtek RTL8306S switches"
+	select SWCONFIG
+
 config FIXED_PHY
 	tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 	depends on PHYLIB
@@ -256,8 +302,55 @@
 	  This module provides a driver for the MDIO busses found in the
 	  Broadcom iProc SoC's.
 
+config RTL8366_SMI
+	tristate "Driver for the RTL8366 SMI interface"
+	depends on GPIOLIB
+	---help---
+	  This module implements the SMI interface protocol which is used
+	  by some RTL8366 ethernet switch devices via the generic GPIO API.
+
+if RTL8366_SMI
+
+config RTL8366_SMI_DEBUG_FS
+	bool "RTL8366 SMI interface debugfs support"
+        depends on DEBUG_FS
+        default n
+
+config RTL8366S_PHY
+	tristate "Driver for the Realtek RTL8366S switch"
+	select SWCONFIG
+
+config RTL8366RB_PHY
+	tristate "Driver for the Realtek RTL8366RB switch"
+	select SWCONFIG
+
+config RTL8367_PHY
+	tristate "Driver for the Realtek RTL8367R/M switches"
+	select SWCONFIG
+
+config RTL8367B_PHY
+	tristate "Driver fot the Realtek RTL8367R-VB switch"
+	select SWCONFIG
+
+endif # RTL8366_SMI
+
+source "drivers/net/phy/b53/Kconfig"
+
+source "drivers/net/phy/qca_85xx/Kconfig"
+
 endif # PHYLIB
 
 config MICREL_KS8995MA
 	tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
 	depends on SPI
+
+config PSB6970_PHY
+	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
+	select SWCONFIG
+	select ETHERNET_PACKET_MANGLE
+
+config MDIO_QCA
+	tristate "Qualcomm Atheros ipq MDIO interface"
+	help
+	  This driver supports the MDIO interface found in Qualcomm
+	  Atheros ipq Soc chip.