/* * linux/arch/mips/philips/nino/time.c * * Copyright (C) 1999 Harald Koerfgen * Copyright (C) 2000 Pavel Machek (pavel@suse.cz) * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Time handling functinos for Philips Nino. */ #include #include #include #include #include #include #include #include #include #include #include extern volatile unsigned long wall_jiffies; extern rwlock_t xtime_lock; static struct timeval xbase; #define USECS_PER_JIFFY (1000000/HZ) /* * Poll the Interrupt Status Registers */ #undef POLL_STATUS static unsigned long do_gettimeoffset(void) { /* * This is a kludge */ return 0; } static void inline readRTC(unsigned long *high, unsigned long *low) { /* read twice, and keep reading till we find two * the same pairs. This is needed in case the RTC * was updating its registers and we read a old * High but a new Low. */ do { *high = RTChigh & RTC_HIGHMASK; *low = RTClow; } while (*high != (RTChigh & RTC_HIGHMASK) || RTClow!=*low); } /* * This version of gettimeofday has near millisecond resolution. */ void do_gettimeofday(struct timeval *tv) { unsigned long flags; unsigned long high, low; read_lock_irqsave(&xtime_lock, flags); // 40 bit RTC, driven by 32khz source: // +-----------+-----------------------------------------+ // | HHHH.HHHH | LLLL.LLLL.LLLL.LLLL.LMMM.MMMM.MMMM.MMMM | // +-----------+-----------------------------------------+ readRTC(&high,&low); tv->tv_sec = (high << 17) | (low >> 15); tv->tv_usec = (low % 32768) * 1953 / 64; tv->tv_sec += xbase.tv_sec; tv->tv_usec += xbase.tv_usec; tv->tv_usec += do_gettimeoffset(); /* * xtime is atomically updated in timer_bh. lost_ticks is * nonzero if the timer bottom half hasnt executed yet. */ if (jiffies - wall_jiffies) tv->tv_usec += USECS_PER_JIFFY; read_unlock_irqrestore(&xtime_lock, flags); if (tv->tv_usec >= 1000000) { tv->tv_usec -= 1000000; tv->tv_sec++; } } void do_settimeofday(struct timeval *tv) { write_lock_irq(&xtime_lock); /* This is revolting. We need to set the xtime.tv_usec * correctly. However, the value in this location is * is value at the last tick. * Discover what correction gettimeofday * would have done, and then undo it! */ tv->tv_usec -= do_gettimeoffset(); if (tv->tv_usec < 0) { tv->tv_usec += 1000000; tv->tv_sec--; } /* reset RTC to 0 (real time is xbase + RTC) */ xbase = *tv; RTCtimerControl |= TIM_RTCCLEAR; RTCtimerControl &= ~TIM_RTCCLEAR; RTCalarmHigh = RTCalarmLow = ~0UL; xtime = *tv; time_state = TIME_BAD; time_maxerror = MAXPHASE; time_esterror = MAXPHASE; write_unlock_irq(&xtime_lock); } static int set_rtc_mmss(unsigned long nowtime) { int retval = 0; return retval; } /* last time the cmos clock got updated */ static long last_rtc_update = 0; /* * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ int do_write = 1; static void timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { #ifdef POLL_STATUS static unsigned long old_IntStatus1 = 0; static unsigned long old_IntStatus3 = 0; static unsigned long old_IntStatus4 = 0; static unsigned long old_IntStatus5 = 0; static int counter = 0; int i; new_spircv = SPIData & 0xff; if ((old_spircv != new_spircv) && (new_spircv != 0xff)) { printk( "SPIData changed: %x\n", new_spircv ); } old_spircv = new_spircv; if (do_write) SPIData = 0; #endif if (!user_mode(regs)) { if (prof_buffer && current->pid) { extern int _stext; unsigned long pc = regs->cp0_epc; pc -= (unsigned long) &_stext; pc >>= prof_shift; /* * Dont ignore out-of-bounds pc values silently, * put them into the last histogram slot, so if * present, they will show up as a sharp peak. */ if (pc > prof_len - 1) pc = prof_len - 1; atomic_inc((atomic_t *) & prof_buffer[pc]); } } /* * aaaand... action! */ do_timer(regs); /* * If we have an externally syncronized Linux clock, then update * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ if (time_state != TIME_BAD && xtime.tv_sec > last_rtc_update + 660 && xtime.tv_usec > 500000 - (tick >> 1) && xtime.tv_usec < 500000 + (tick >> 1)) { if (set_rtc_mmss(xtime.tv_sec) == 0) last_rtc_update = xtime.tv_sec; else last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */ } } static struct irqaction irq0 = {timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL}; void (*board_time_init) (struct irqaction * irq); int __init time_init(void) { struct timeval starttime; starttime.tv_sec = mktime(2000, 1, 1, 0, 0, 0); starttime.tv_usec = 0; do_settimeofday(&starttime); board_time_init(&irq0); return 0; }