/* * BK Id: SCCS/s.pci.c 1.35 11/13/01 08:19:57 trini */ /* * Common pmac/prep/chrp pci routines. -- Cort */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pci.h" #define DEBUG #ifdef DEBUG #define DBG(x...) printk(x) #else #define DBG(x...) #endif unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; unsigned long pci_dram_offset = 0; void pcibios_make_OF_bus_map(void); static void pcibios_fixup_resources(struct pci_dev* dev); static void fixup_broken_pcnet32(struct pci_dev* dev); static void fixup_rev1_53c810(struct pci_dev* dev); #ifdef CONFIG_ALL_PPC static void pcibios_fixup_cardbus(struct pci_dev* dev); static u8* pci_to_OF_bus_map; #endif /* By default, we don't re-assign bus numbers. We do this only on * some pmacs */ int pci_assign_all_busses; struct pci_controller* hose_head; struct pci_controller** hose_tail = &hose_head; static int pci_bus_count; struct pci_fixup pcibios_fixups[] = { { PCI_FIXUP_HEADER, PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32 }, { PCI_FIXUP_HEADER, PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810 }, { PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources }, #ifdef CONFIG_ALL_PPC /* We should add per-machine fixup support in xxx_setup.c or xxx_pci.c */ { PCI_FIXUP_FINAL, PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1211, pcibios_fixup_cardbus }, #endif /* CONFIG_ALL_PPC */ { 0 } }; static void fixup_rev1_53c810(struct pci_dev* dev) { /* rev 1 ncr53c810 chips don't set the class at all which means * they don't get their resources remapped. Fix that here. */ if ((dev->class == PCI_CLASS_NOT_DEFINED)) { printk("NCR 53c810 rev 1 detected, setting PCI class.\n"); dev->class = PCI_CLASS_STORAGE_SCSI; } } static void fixup_broken_pcnet32(struct pci_dev* dev) { if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { dev->vendor = PCI_VENDOR_ID_AMD; pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); pci_name_device(dev); } } void pcibios_update_resource(struct pci_dev *dev, struct resource *root, struct resource *res, int resource) { u32 new, check; int reg; struct pci_controller* hose = dev->sysdata; unsigned long io_offset; new = res->start; if (hose && res->flags & IORESOURCE_IO) { io_offset = (unsigned long)hose->io_base_virt - isa_io_base; new -= io_offset; } if (hose && res->flags & IORESOURCE_MEM) new -= hose->pci_mem_offset; new |= (res->flags & PCI_REGION_FLAG_MASK); if (resource < 6) { reg = PCI_BASE_ADDRESS_0 + 4*resource; } else if (resource == PCI_ROM_RESOURCE) { res->flags |= PCI_ROM_ADDRESS_ENABLE; reg = dev->rom_base_reg; } else { /* Somebody might have asked allocation of a non-standard resource */ return; } pci_write_config_dword(dev, reg, new); pci_read_config_dword(dev, reg, &check); if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) { printk(KERN_ERR "PCI: Error while updating region " "%s/%d (%08x != %08x)\n", dev->slot_name, resource, new, check); } } static void pcibios_fixup_resources(struct pci_dev *dev) { struct pci_controller* hose = (struct pci_controller *)dev->sysdata; int i; unsigned long offset; if (!hose) { printk(KERN_ERR "No hose for PCI dev %s!\n", dev->slot_name); return; } for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { struct resource *res = dev->resource + i; if (!res->start || !res->flags) continue; if (res->end == 0xffffffff) { DBG("PCI:%s Resource %d [%08lx-%08lx] is unassigned\n", dev->slot_name, i, res->start, res->end); res->end -= res->start; res->start = 0; continue; } offset = 0; if (res->flags & IORESOURCE_MEM) { offset = hose->pci_mem_offset; } else if (res->flags & IORESOURCE_IO) { offset = (unsigned long) hose->io_base_virt - isa_io_base; } if (offset != 0) { res->start += offset; res->end += offset; #ifdef DEBUG printk("Fixup res %d (%lx) of dev %s: %lx -> %lx\n", i, res->flags, dev->slot_name, res->start - offset, res->start); #endif } } } #ifdef CONFIG_ALL_PPC static void pcibios_fixup_cardbus(struct pci_dev* dev) { /* * Fix the interrupt routing on the TI1211 chip on the 1999 * G3 powerbook, which doesn't get initialized properly by OF. */ if (dev->vendor == PCI_VENDOR_ID_TI && dev->device == PCI_DEVICE_ID_TI_1211) { u32 val; /* 0x8c == TI122X_IRQMUX, 2 says to route the INTA signal out the MFUNC0 pin */ if (pci_read_config_dword(dev, 0x8c, &val) == 0 && val == 0) pci_write_config_dword(dev, 0x8c, 2); } } #endif /* CONFIG_ALL_PPC */ /* * We need to avoid collisions with `mirrored' VGA ports * and other strange ISA hardware, so we always want the * addresses to be allocated in the 0x000-0x0ff region * modulo 0x400. * * Why? Because some silly external IO cards only decode * the low 10 bits of the IO address. The 0x00-0xff region * is reserved for motherboard devices that decode all 16 * bits, so it's ok to allocate at, say, 0x2800-0x28ff, * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ void pcibios_align_resource(void *data, struct resource *res, unsigned long size) { struct pci_dev *dev = data; if (res->flags & IORESOURCE_IO) { unsigned long start = res->start; if (size > 0x100) { printk(KERN_ERR "PCI: I/O Region %s/%d too large" " (%ld bytes)\n", dev->slot_name, dev->resource - res, size); } if (start & 0x300) { start = (start + 0x3ff) & ~0x3ff; res->start = start; } } } /* * Handle resources of PCI devices. If the world were perfect, we could * just allocate all the resource regions and do nothing more. It isn't. * On the other hand, we cannot just re-allocate all devices, as it would * require us to know lots of host bridge internals. So we attempt to * keep as much of the original configuration as possible, but tweak it * when it's found to be wrong. * * Known BIOS problems we have to work around: * - I/O or memory regions not configured * - regions configured, but not enabled in the command register * - bogus I/O addresses above 64K used * - expansion ROMs left enabled (this may sound harmless, but given * the fact the PCI specs explicitly allow address decoders to be * shared between expansion ROMs and other resource regions, it's * at least dangerous) * * Our solution: * (1) Allocate resources for all buses behind PCI-to-PCI bridges. * This gives us fixed barriers on where we can allocate. * (2) Allocate resources for all enabled devices. If there is * a collision, just mark the resource as unallocated. Also * disable expansion ROMs during this step. * (3) Try to allocate resources for disabled devices. If the * resources were assigned correctly, everything goes well, * if they weren't, they won't disturb allocation of other * resources. * (4) Assign new addresses to resources which were either * not configured at all or misconfigured. If explicitly * requested by the user, configure expansion ROM address * as well. */ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) { struct list_head *ln; struct pci_bus *bus; int i; struct resource *res, *pr; /* Depth-First Search on bus tree */ for (ln = bus_list->next; ln != bus_list; ln=ln->next) { bus = pci_bus_b(ln); for (i = 0; i < 4; ++i) { if ((res = bus->resource[i]) == NULL || !res->flags) continue; if (bus->parent == NULL) pr = (res->flags & IORESOURCE_IO)? &ioport_resource: &iomem_resource; else pr = pci_find_parent_resource(bus->self, res); if (pr && request_resource(pr, res) == 0) continue; printk(KERN_ERR "PCI: Cannot allocate resource region " "%d of PCI bridge %d\n", i, bus->number); DBG("PCI: resource is %lx..%lx (%lx), parent %p\n", res->start, res->end, res->flags, pr); } pcibios_allocate_bus_resources(&bus->children); } } static inline void alloc_resource(struct pci_dev *dev, int idx) { struct resource *pr, *r = &dev->resource[idx]; DBG("PCI:%s: Resource %d: %08lx-%08lx (f=%lx)\n", dev->slot_name, idx, r->start, r->end, r->flags); pr = pci_find_parent_resource(dev, r); if (!pr || request_resource(pr, r) < 0) { printk(KERN_ERR "PCI: Cannot allocate resource region %d" " of device %s\n", idx, dev->slot_name); if (pr) DBG("PCI: parent is %p: %08lx-%08lx (f=%lx)\n", pr, pr->start, pr->end, pr->flags); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; } } static void __init pcibios_allocate_resources(int pass) { struct pci_dev *dev; int idx, disabled; u16 command; struct resource *r; pci_for_each_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); for (idx = 0; idx < 6; idx++) { r = &dev->resource[idx]; if (r->parent) /* Already allocated */ continue; if (!r->start) /* Not assigned at all */ continue; if (r->flags & IORESOURCE_IO) disabled = !(command & PCI_COMMAND_IO); else disabled = !(command & PCI_COMMAND_MEMORY); if (pass == disabled) alloc_resource(dev, idx); } if (pass) continue; r = &dev->resource[PCI_ROM_RESOURCE]; if (r->flags & PCI_ROM_ADDRESS_ENABLE) { /* Turn the ROM off, leave the resource region, but keep it unregistered. */ u32 reg; DBG("PCI: Switching off ROM of %s\n", dev->slot_name); r->flags &= ~PCI_ROM_ADDRESS_ENABLE; pci_read_config_dword(dev, dev->rom_base_reg, ®); pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE); } } } static void __init pcibios_assign_resources(void) { struct pci_dev *dev; int idx; struct resource *r; pci_for_each_dev(dev) { int class = dev->class >> 8; /* Don't touch classless devices and host bridges */ if (!class || class == PCI_CLASS_BRIDGE_HOST) continue; for (idx = 0; idx < 6; idx++) { r = &dev->resource[idx]; /* * We shall assign a new address to this resource, * either because the BIOS (sic) forgot to do so * or because we have decided the old address was * unusable for some reason. */ if (!r->start && r->end && (!ppc_md.pcibios_enable_device_hook || !ppc_md.pcibios_enable_device_hook(dev, 1))) pci_assign_resource(dev, idx); } #if 0 /* don't assign ROMs */ r = &dev->resource[PCI_ROM_RESOURCE]; r->end -= r->start; r->start = 0; if (r->end) pci_assign_resource(dev, PCI_ROM_RESOURCE); #endif } } int pcibios_enable_resources(struct pci_dev *dev) { u16 cmd, old_cmd; int idx; struct resource *r; pci_read_config_word(dev, PCI_COMMAND, &cmd); old_cmd = cmd; for(idx=0; idx<6; idx++) { r = &dev->resource[idx]; if (!r->start && r->end) { printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", dev->slot_name); return -EINVAL; } if (r->flags & IORESOURCE_IO) cmd |= PCI_COMMAND_IO; if (r->flags & IORESOURCE_MEM) cmd |= PCI_COMMAND_MEMORY; } if (dev->resource[PCI_ROM_RESOURCE].start) cmd |= PCI_COMMAND_MEMORY; if (cmd != old_cmd) { printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd); pci_write_config_word(dev, PCI_COMMAND, cmd); } return 0; } static int next_controller_index; struct pci_controller * __init pcibios_alloc_controller(void) { struct pci_controller *hose; hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose)); memset(hose, 0, sizeof(struct pci_controller)); *hose_tail = hose; hose_tail = &hose->next; hose->index = next_controller_index++; return hose; } #ifdef CONFIG_ALL_PPC /* * Functions below are used on OpenFirmware machines. */ static void make_one_node_map(struct device_node* node, u8 pci_bus) { int *bus_range; int len; if (pci_bus >= pci_bus_count) return; bus_range = (int *) get_property(node, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s\n", node->full_name); return; } pci_to_OF_bus_map[pci_bus] = bus_range[0]; for (node=node->child; node != 0;node = node->sibling) { struct pci_dev* dev; unsigned int *class_code, *reg; class_code = (unsigned int *) get_property(node, "class-code", 0); if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) continue; reg = (unsigned int *)get_property(node, "reg", 0); if (!reg) continue; dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff)); if (!dev || !dev->subordinate) continue; make_one_node_map(node, dev->subordinate->number); } } void pcibios_make_OF_bus_map(void) { int i; struct pci_controller* hose; u8* of_prop_map; pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL); if (!pci_to_OF_bus_map) { printk(KERN_ERR "Can't allocate OF bus map !\n"); return; } /* We fill the bus map with invalid values, that helps * debugging. */ for (i=0; inext) { struct device_node* node; node = (struct device_node *)hose->arch_data; if (!node) continue; make_one_node_map(node, hose->first_busno); } of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", 0); if (of_prop_map) memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count); #ifdef DEBUG printk("PCI->OF bus map:\n"); for (i=0; i %d\n", i, pci_to_OF_bus_map[i]); } #endif } static struct device_node* scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn) { struct device_node* sub_node; for (; node != 0;node = node->sibling) { unsigned int *class_code, *reg; reg = (unsigned int *) get_property(node, "reg", 0); if (reg && ((reg[0] >> 8) & 0xff) == dev_fn && ((reg[0] >> 16) & 0xff) == bus) return node; /* For PCI<->PCI bridges or CardBus bridges, we go down * Note: some OFs create a parent node "multifunc-device" as * a fake root for all functions of a multi-function device, * we go down them as well. */ class_code = (unsigned int *) get_property(node, "class-code", 0); if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) && strcmp(node->name, "multifunc-device")) continue; sub_node = scan_OF_childs_for_device(node->child, bus, dev_fn); if (sub_node) return sub_node; } return NULL; } /* * Scans the OF tree for a device node matching a PCI device */ struct device_node* pci_device_to_OF_node(struct pci_dev *dev) { struct pci_controller *hose; struct device_node *node; int bus; if (!have_of) return NULL; /* Lookup the hose */ bus = dev->bus->number; hose = pci_bus_to_hose(bus); if (!hose) return NULL; /* Check it has an OF node associated */ node = (struct device_node *) hose->arch_data; if (!node) return NULL; /* Fixup bus number according to what OF think it is. */ if (pci_to_OF_bus_map) bus = pci_to_OF_bus_map[bus]; if (bus == 0xff) return NULL; /* Now, lookup childs of the hose */ return scan_OF_childs_for_device(node->child, bus, dev->devfn); } /* This routine is meant to be used early during boot, when the * PCI bus numbers have not yet been assigned, and you need to * issue PCI config cycles to an OF device. * It could also be used to "fix" RTAS config cycles if you want * to set pci_assign_all_busses to 1 and still use RTAS for PCI * config cycles. */ struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) { if (!have_of) return NULL; while(node) { struct pci_controller* hose; for (hose=hose_head;hose;hose=hose->next) if (hose->arch_data == node) return hose; node=node->parent; } return NULL; } /* * Returns the PCI device matching a given OF node */ int pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn) { unsigned int *reg; int i; if (!have_of) return -ENODEV; reg = (unsigned int *) get_property(node, "reg", 0); if (!reg) return -ENODEV; *bus = (reg[0] >> 16) & 0xff; for (i=0; pci_to_OF_bus_map && i> 8) & 0xff); return 0; } void __init pci_process_bridge_OF_ranges(struct pci_controller *hose, struct device_node *dev, int primary) { unsigned int *ranges, *prev; int rlen = 0; int memno = 0; struct resource *res; int np, na = prom_n_addr_cells(dev); np = na + 5; /* First we try to merge ranges to fix a problem with some pmacs * that can have more than 3 ranges, fortunately using contiguous * addresses -- BenH */ ranges = (unsigned int *) get_property(dev, "ranges", &rlen); prev = NULL; while ((rlen -= np * sizeof(unsigned int)) >= 0) { if (prev) { if (prev[0] == ranges[0] && prev[1] == ranges[1] && (prev[2] + prev[na+4]) == ranges[2] && (prev[na+2] + prev[na+4]) == ranges[na+2]) { prev[na+4] += ranges[na+4]; ranges[0] = 0; ranges += np; continue; } } prev = ranges; ranges += np; } /* * The ranges property is laid out as an array of elements, * each of which comprises: * cells 0 - 2: a PCI address * cells 3 or 3+4: a CPU physical address * (size depending on dev->n_addr_cells) * cells 4+5 or 5+6: the size of the range */ rlen = 0; hose->io_base_phys = 0; ranges = (unsigned int *) get_property(dev, "ranges", &rlen); while ((rlen -= np * sizeof(unsigned int)) >= 0) { res = NULL; switch (ranges[0] >> 24) { case 1: /* I/O space */ if (ranges[2] != 0) break; hose->io_base_phys = ranges[na+2]; hose->io_base_virt = ioremap(ranges[na+2], ranges[na+4]); if (primary) isa_io_base = (unsigned long) hose->io_base_virt; res = &hose->io_resource; res->flags = IORESOURCE_IO; res->start = ranges[2]; break; case 2: /* memory space */ memno = 0; if (ranges[1] == 0 && ranges[2] == 0 && ranges[na+4] <= (16 << 20)) { /* 1st 16MB, i.e. ISA memory area */ if (primary) isa_mem_base = ranges[na+2]; memno = 1; } while (memno < 3 && hose->mem_resources[memno].flags) ++memno; if (memno == 0) hose->pci_mem_offset = ranges[na+2] - ranges[2]; if (memno < 3) { res = &hose->mem_resources[memno]; res->flags = IORESOURCE_MEM; res->start = ranges[na+2]; } break; } if (res != NULL) { res->name = dev->full_name; res->end = res->start + ranges[na+4] - 1; res->parent = NULL; res->sibling = NULL; res->child = NULL; } ranges += np; } } #endif /* CONFIG_ALL_PPC */ void __init pcibios_init(void) { struct pci_controller *hose; struct pci_bus *bus; int next_busno; printk(KERN_INFO "PCI: Probing PCI hardware\n"); /* Scan all of the recorded PCI controllers. */ for (next_busno = 0, hose = hose_head; hose; hose = hose->next) { if (pci_assign_all_busses) hose->first_busno = next_busno; hose->last_busno = 0xff; bus = pci_scan_bus(hose->first_busno, hose->ops, hose); hose->last_busno = bus->subordinate; if (pci_assign_all_busses || next_busno <= hose->last_busno) next_busno = hose->last_busno+1; } pci_bus_count = next_busno; /* OpenFirmware based machines need a map of OF bus * numbers vs. kernel bus numbers since we may have to * remap them. */ if (pci_assign_all_busses && have_of) pcibios_make_OF_bus_map(); /* Call machine dependant fixup */ if (ppc_md.pcibios_fixup) ppc_md.pcibios_fixup(); /* Allocate and assign resources */ pcibios_allocate_bus_resources(&pci_root_buses); pcibios_allocate_resources(0); pcibios_allocate_resources(1); pcibios_assign_resources(); /* Call machine dependent post-init code */ if (ppc_md.pcibios_after_init) ppc_md.pcibios_after_init(); } int __init pcibios_assign_all_busses(void) { return pci_assign_all_busses; } void __init pcibios_fixup_pbus_ranges(struct pci_bus * bus, struct pbus_set_ranges_data * ranges) { ranges->io_start -= bus->resource[0]->start; ranges->io_end -= bus->resource[0]->start; ranges->mem_start -= bus->resource[1]->start; ranges->mem_end -= bus->resource[1]->start; } unsigned long resource_fixup(struct pci_dev * dev, struct resource * res, unsigned long start, unsigned long size) { return start; } void __init pcibios_fixup_bus(struct pci_bus *bus) { struct pci_controller *hose = (struct pci_controller *) bus->sysdata; unsigned long io_offset; struct resource *res; int i; io_offset = (unsigned long)hose->io_base_virt - isa_io_base; if (bus->parent == NULL) { /* This is a host bridge - fill in its resources */ hose->bus = bus; bus->resource[0] = res = &hose->io_resource; if (!res->flags) { if (io_offset) printk(KERN_ERR "I/O resource not set for host" " bridge %d\n", hose->index); res->start = 0; res->end = IO_SPACE_LIMIT; res->flags = IORESOURCE_IO; } res->start += io_offset; res->end += io_offset; for (i = 0; i < 3; ++i) { res = &hose->mem_resources[i]; if (!res->flags) { if (i > 0) continue; printk(KERN_ERR "Memory resource not set for " "host bridge %d\n", hose->index); res->start = hose->pci_mem_offset; res->end = ~0U; res->flags = IORESOURCE_MEM; } bus->resource[i+1] = res; } } else { /* This is a subordinate bridge */ pci_read_bridge_bases(bus); for (i = 0; i < 4; ++i) { if ((res = bus->resource[i]) == NULL) continue; if (!res->flags) continue; if (io_offset && (res->flags & IORESOURCE_IO)) { res->start += io_offset; res->end += io_offset; } else if (hose->pci_mem_offset && (res->flags & IORESOURCE_MEM)) { res->start += hose->pci_mem_offset; res->end += hose->pci_mem_offset; } } } if (ppc_md.pcibios_fixup_bus) ppc_md.pcibios_fixup_bus(bus); } char __init *pcibios_setup(char *str) { return str; } /* the next one is stolen from the alpha port... */ void __init pcibios_update_irq(struct pci_dev *dev, int irq) { pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); /* XXX FIXME - update OF device tree node interrupt property */ } int pcibios_enable_device(struct pci_dev *dev) { u16 cmd, old_cmd; int idx; struct resource *r; if (ppc_md.pcibios_enable_device_hook) if (ppc_md.pcibios_enable_device_hook(dev, 0)) return -EINVAL; pci_read_config_word(dev, PCI_COMMAND, &cmd); old_cmd = cmd; for (idx=0; idx<6; idx++) { r = &dev->resource[idx]; if (!r->start && r->end) { printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", dev->slot_name); return -EINVAL; } if (r->flags & IORESOURCE_IO) cmd |= PCI_COMMAND_IO; if (r->flags & IORESOURCE_MEM) cmd |= PCI_COMMAND_MEMORY; } if (cmd != old_cmd) { printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd); pci_write_config_word(dev, PCI_COMMAND, cmd); } return 0; } struct pci_controller* pci_bus_to_hose(int bus) { struct pci_controller* hose = hose_head; for (; hose; hose = hose->next) if (bus >= hose->first_busno && bus <= hose->last_busno) return hose; return NULL; } void* pci_bus_io_base(unsigned int bus) { struct pci_controller *hose; hose = pci_bus_to_hose(bus); if (!hose) return NULL; return hose->io_base_virt; } unsigned long pci_bus_io_base_phys(unsigned int bus) { struct pci_controller *hose; hose = pci_bus_to_hose(bus); if (!hose) return 0; return hose->io_base_phys; } unsigned long pci_bus_mem_base_phys(unsigned int bus) { struct pci_controller *hose; hose = pci_bus_to_hose(bus); if (!hose) return 0; return hose->pci_mem_offset; } unsigned long pci_resource_to_bus(struct pci_dev *pdev, struct resource *res) { /* Hack alert again ! See comments in chrp_pci.c */ struct pci_controller* hose = (struct pci_controller *)pdev->sysdata; if (hose && res->flags & IORESOURCE_MEM) return res->start - hose->pci_mem_offset; /* We may want to do something with IOs here... */ return res->start; } /* * Return the index of the PCI controller for device pdev. */ int pci_controller_num(struct pci_dev *dev) { struct pci_controller *hose = (struct pci_controller *) dev->sysdata; return hose->index; } /* * Platform support for /proc/bus/pci/X/Y mmap()s, * modelled on the sparc64 implementation by Dave Miller. * -- paulus. */ /* * Adjust vm_pgoff of VMA such that it is the physical page offset * corresponding to the 32-bit pci bus offset for DEV requested by the user. * * Basically, the user finds the base address for his device which he wishes * to mmap. They read the 32-bit value from the config space base register, * add whatever PAGE_SIZE multiple offset they wish, and feed this into the * offset parameter of mmap on /proc/bus/pci/XXX for that device. * * Returns negative error code on failure, zero on success. */ static __inline__ int __pci_mmap_make_offset(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state) { struct pci_controller *hose = (struct pci_controller *) dev->sysdata; unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; unsigned long io_offset = 0; int i, res_bit; if (hose == 0) return -EINVAL; /* should never happen */ /* If memory, add on the PCI bridge address offset */ if (mmap_state == pci_mmap_mem) { offset += hose->pci_mem_offset; res_bit = IORESOURCE_MEM; } else { io_offset = (unsigned long)hose->io_base_virt - isa_io_base; offset += io_offset; res_bit = IORESOURCE_IO; } /* * Check that the offset requested corresponds to one of the * resources of the device. */ for (i = 0; i <= PCI_ROM_RESOURCE; i++) { struct resource *rp = &dev->resource[i]; int flags = rp->flags; /* treat ROM as memory (should be already) */ if (i == PCI_ROM_RESOURCE) flags |= IORESOURCE_MEM; /* Active and same type? */ if ((flags & res_bit) == 0) continue; /* In the range of this resource? */ if (offset < (rp->start & PAGE_MASK) || offset > rp->end) continue; /* found it! construct the final physical address */ if (mmap_state == pci_mmap_io) offset += hose->io_base_phys - io_offset; vma->vm_pgoff = offset >> PAGE_SHIFT; return 0; } return -EINVAL; } /* * Set vm_flags of VMA, as appropriate for this architecture, for a pci device * mapping. */ static __inline__ void __pci_mmap_set_flags(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state) { vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO; } /* * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci * device mapping. */ static __inline__ void __pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { int prot = pgprot_val(vma->vm_page_prot); /* XXX would be nice to have a way to ask for write-through */ prot |= _PAGE_NO_CACHE; if (!write_combine) prot |= _PAGE_GUARDED; vma->vm_page_prot = __pgprot(prot); } /* * Perform the actual remap of the pages for a PCI device mapping, as * appropriate for this architecture. The region in the process to map * is described by vm_start and vm_end members of VMA, the base physical * address is found in vm_pgoff. * The pci device structure is provided so that architectures may make mapping * decisions on a per-device or per-bus basis. * * Returns a negative error code on failure, zero on success. */ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { int ret; ret = __pci_mmap_make_offset(dev, vma, mmap_state); if (ret < 0) return ret; __pci_mmap_set_flags(dev, vma, mmap_state); __pci_mmap_set_pgprot(dev, vma, mmap_state, write_combine); ret = remap_page_range(vma->vm_start, vma->vm_pgoff << PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot); return ret; } /* Obsolete functions. Should be removed once the symbios driver * is fixed */ unsigned long phys_to_bus(unsigned long pa) { struct pci_controller *hose; int i; for (hose = hose_head; hose; hose = hose->next) { for (i = 0; i < 3; ++i) { if (pa >= hose->mem_resources[i].start && pa <= hose->mem_resources[i].end) { /* * XXX the hose->pci_mem_offset really * only applies to mem_resources[0]. * We need a way to store an offset for * the others. -- paulus */ if (i == 0) pa -= hose->pci_mem_offset; return pa; } } } /* hmmm, didn't find it */ return 0; } unsigned long pci_phys_to_bus(unsigned long pa, int busnr) { struct pci_controller* hose = pci_bus_to_hose(busnr); if (!hose) return pa; return pa - hose->pci_mem_offset; } unsigned long pci_bus_to_phys(unsigned int ba, int busnr) { struct pci_controller* hose = pci_bus_to_hose(busnr); if (!hose) return ba; return ba + hose->pci_mem_offset; } /* Provide information on locations of various I/O regions in physical * memory. Do this on a per-card basis so that we choose the right * root bridge. * Note that the returned IO or memory base is a physical address */ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) { struct pci_controller* hose = pci_bus_to_hose(bus); long result = -EOPNOTSUPP; if (!hose) return -ENODEV; switch (which) { case IOBASE_BRIDGE_NUMBER: return (long)hose->first_busno; case IOBASE_MEMORY: return (long)hose->pci_mem_offset; case IOBASE_IO: return (long)hose->io_base_phys; case IOBASE_ISA_IO: return (long)isa_io_base; case IOBASE_ISA_MEM: return (long)isa_mem_base; } return result; } /* * Null PCI config access functions, for the case when we can't * find a hose. */ #define NULL_PCI_OP(rw, size, type) \ static int \ null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ { \ return PCIBIOS_DEVICE_NOT_FOUND; \ } NULL_PCI_OP(read, byte, u8 *) NULL_PCI_OP(read, word, u16 *) NULL_PCI_OP(read, dword, u32 *) NULL_PCI_OP(write, byte, u8) NULL_PCI_OP(write, word, u16) NULL_PCI_OP(write, dword, u32) static struct pci_ops null_pci_ops = { null_read_config_byte, null_read_config_word, null_read_config_dword, null_write_config_byte, null_write_config_word, null_write_config_dword }; /* * These functions are used early on before PCI scanning is done * and all of the pci_dev and pci_bus structures have been created. */ static struct pci_dev * fake_pci_dev(struct pci_controller *hose, int busnr, int devfn) { static struct pci_dev dev; static struct pci_bus bus; if (hose == 0) { hose = pci_bus_to_hose(busnr); if (hose == 0) printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); } dev.bus = &bus; dev.sysdata = hose; dev.devfn = devfn; bus.number = busnr; bus.ops = hose? hose->ops: &null_pci_ops; return &dev; } #define EARLY_PCI_OP(rw, size, type) \ int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ int devfn, int offset, type value) \ { \ return pci_##rw##_config_##size(fake_pci_dev(hose, bus, devfn), \ offset, value); \ } EARLY_PCI_OP(read, byte, u8 *) EARLY_PCI_OP(read, word, u16 *) EARLY_PCI_OP(read, dword, u32 *) EARLY_PCI_OP(write, byte, u8) EARLY_PCI_OP(write, word, u16) EARLY_PCI_OP(write, dword, u32)