/* SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying file README.st for more information. History: OnStream SCSI Tape support (osst) cloned from st.c by Willem Riede (osst@riede.org) Feb 2000 Fixes ... Kurt Garloff Mar 2000 Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara. Contribution and ideas from several people including (in alphabetical order) Klaus Ehrenfried, Wolfgang Denk, Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky, J"org Weule, and Eric Youngdale. Copyright 1992 - 2000 Kai Makisara email Kai.Makisara@metla.fi $Header: /home/cvsroot/Driver/osst.c,v 1.65 2001/11/11 20:38:56 riede Exp $ Microscopic alterations - Rik Ling, 2000/12/21 Last modified: Wed Feb 2 22:04:05 2000 by makisara@kai.makisara.local Some small formal changes - aeb, 950809 */ static const char * cvsid = "$Id: osst.c,v 1.65 2001/11/11 20:38:56 riede Exp $"; const char * osst_version = "0.9.10"; /* The "failure to reconnect" firmware bug */ #define OSST_FW_NEED_POLL_MIN 10601 /*(107A)*/ #define OSST_FW_NEED_POLL_MAX 10704 /*(108D)*/ #define OSST_FW_NEED_POLL(x,d) ((x) >= OSST_FW_NEED_POLL_MIN && (x) <= OSST_FW_NEED_POLL_MAX && d->host->this_id != 7) #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* The driver prints some debugging information on the console if DEBUG is defined and non-zero. */ #define DEBUG 0 /* The message level for the debug messages is currently set to KERN_NOTICE so that people can easily see the messages. Later when the debugging messages in the drivers are more widely classified, this may be changed to KERN_DEBUG. */ #define OSST_DEB_MSG KERN_NOTICE #define MAJOR_NR OSST_MAJOR #include #include "scsi.h" #include "hosts.h" #include #define ST_KILOBYTE 1024 #include "st.h" #include "osst.h" #include "osst_options.h" #include "osst_detect.h" #include "constants.h" static int buffer_kbs = 0; static int write_threshold_kbs = 0; static int max_buffers = 0; static int max_sg_segs = 0; #ifdef MODULE MODULE_AUTHOR("Willem Riede"); MODULE_DESCRIPTION("OnStream SCSI Tape Driver"); MODULE_LICENSE("GPL"); MODULE_PARM(buffer_kbs, "i"); MODULE_PARM(write_threshold_kbs, "i"); MODULE_PARM(max_buffers, "i"); MODULE_PARM(max_sg_segs, "i"); #else static struct osst_dev_parm { char *name; int *val; } parms[] __initdata = { { "buffer_kbs", &buffer_kbs }, { "write_threshold_kbs", &write_threshold_kbs }, { "max_buffers", &max_buffers }, { "max_sg_segs", &max_sg_segs } }; #endif /* Some default definitions have been moved to osst_options.h */ #define OSST_BUFFER_SIZE (OSST_BUFFER_BLOCKS * ST_KILOBYTE) #define OSST_WRITE_THRESHOLD (OSST_WRITE_THRESHOLD_BLOCKS * ST_KILOBYTE) /* The buffer size should fit into the 24 bits for length in the 6-byte SCSI read and write commands. */ #if OSST_BUFFER_SIZE >= (2 << 24 - 1) #error "Buffer size should not exceed (2 << 24 - 1) bytes!" #endif #if DEBUG static int debugging = 1; /* uncomment define below to test error recovery */ // #define OSST_INJECT_ERRORS 1 #endif #define MAX_RETRIES 0 #define MAX_WRITE_RETRIES 0 #define MAX_READY_RETRIES 5 #define NO_TAPE NOT_READY #define OSST_TIMEOUT (200 * HZ) #define OSST_LONG_TIMEOUT (1800 * HZ) #define TAPE_NR(x) (MINOR(x) & ~(128 | ST_MODE_MASK)) #define TAPE_MODE(x) ((MINOR(x) & ST_MODE_MASK) >> ST_MODE_SHIFT) /* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower 24 bits) */ #define SET_DENS_AND_BLK 0x10001 static int osst_nbr_buffers; static int osst_buffer_size = OSST_BUFFER_SIZE; static int osst_write_threshold = OSST_WRITE_THRESHOLD; static int osst_max_buffers = OSST_MAX_BUFFERS; static int osst_max_sg_segs = OSST_MAX_SG; static OS_Scsi_Tape **os_scsi_tapes = NULL; static OSST_buffer **osst_buffers = NULL; static int modes_defined = FALSE; static OSST_buffer *new_tape_buffer(int, int); static int enlarge_buffer(OSST_buffer *, int, int); static void normalize_buffer(OSST_buffer *); static int append_to_buffer(const char *, OSST_buffer *, int); static int from_buffer(OSST_buffer *, char *, int); static int osst_zero_buffer_tail(OSST_buffer *); static int osst_copy_to_buffer(OSST_buffer *, unsigned char *); static int osst_copy_from_buffer(OSST_buffer *, unsigned char *); static int osst_init(void); static int osst_attach(Scsi_Device *); static int osst_detect(Scsi_Device *); static void osst_detach(Scsi_Device *); struct Scsi_Device_Template osst_template = { name: "OnStream tape", tag: "osst", scsi_type: TYPE_TAPE, major: OSST_MAJOR, detect: osst_detect, init: osst_init, attach: osst_attach, detach: osst_detach }; static int osst_int_ioctl(OS_Scsi_Tape *STp, Scsi_Request ** aSRpnt, unsigned int cmd_in,unsigned long arg); static int osst_set_frame_position(OS_Scsi_Tape *STp, Scsi_Request ** aSRpnt, int frame, int skip); static int osst_get_frame_position(OS_Scsi_Tape *STp, Scsi_Request ** aSRpnt); static int osst_flush_write_buffer(OS_Scsi_Tape *STp, Scsi_Request ** aSRpnt); static int osst_write_error_recovery(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int pending); /* Routines that handle the interaction with mid-layer SCSI routines */ /* Convert the result to success code */ static int osst_chk_result(OS_Scsi_Tape * STp, Scsi_Request * SRpnt) { int dev = TAPE_NR(STp->devt); int result = SRpnt->sr_result; unsigned char * sense = SRpnt->sr_sense_buffer, scode; #if DEBUG const char *stp; #endif if (!result) { sense[0] = 0; /* We don't have sense data if this byte is zero */ return 0; } if (driver_byte(result) & DRIVER_SENSE) scode = sense[2] & 0x0f; else { sense[0] = 0; /* We don't have sense data if this byte is zero */ scode = 0; } #if DEBUG if (debugging) { printk(OSST_DEB_MSG "osst%d:D: Error: %x, cmd: %x %x %x %x %x %x Len: %d\n", dev, result, SRpnt->sr_cmnd[0], SRpnt->sr_cmnd[1], SRpnt->sr_cmnd[2], SRpnt->sr_cmnd[3], SRpnt->sr_cmnd[4], SRpnt->sr_cmnd[5], SRpnt->sr_bufflen); if (driver_byte(result) & DRIVER_SENSE) print_req_sense("osst", SRpnt); } else #endif if (!(driver_byte(result) & DRIVER_SENSE) || ((sense[0] & 0x70) == 0x70 && scode != NO_SENSE && scode != RECOVERED_ERROR && /* scode != UNIT_ATTENTION && */ scode != BLANK_CHECK && scode != VOLUME_OVERFLOW && SRpnt->sr_cmnd[0] != MODE_SENSE && SRpnt->sr_cmnd[0] != TEST_UNIT_READY)) { /* Abnormal conditions for tape */ if (driver_byte(result) & DRIVER_SENSE) { printk(KERN_WARNING "osst%d:W: Command with sense data: ", dev); print_req_sense("osst:", SRpnt); } else { static int notyetprinted = 1; printk(KERN_WARNING "osst%d:W: Warning %x (sugg. bt 0x%x, driver bt 0x%x, host bt 0x%x).\n", dev, result, suggestion(result), driver_byte(result) & DRIVER_MASK, host_byte(result)); if (notyetprinted) { notyetprinted = 0; printk(KERN_INFO "osst%d:I: This warning may be caused by your scsi controller,\n", dev); printk(KERN_INFO "osst%d:I: it has been reported with some Buslogic cards.\n", dev); } } } if ((sense[0] & 0x70) == 0x70 && scode == RECOVERED_ERROR) { STp->recover_count++; STp->recover_erreg++; #if DEBUG if (debugging) { if (SRpnt->sr_cmnd[0] == READ_6) stp = "read"; else if (SRpnt->sr_cmnd[0] == WRITE_6) stp = "write"; else stp = "ioctl"; printk(OSST_DEB_MSG "osst%d:D: Recovered %s error (%d).\n", dev, stp, os_scsi_tapes[dev]->recover_count); } #endif if ((sense[2] & 0xe0) == 0) return 0; } return (-EIO); } /* Wakeup from interrupt */ static void osst_sleep_done (Scsi_Cmnd * SCpnt) { unsigned int dev = TAPE_NR(SCpnt->request.rq_dev); OS_Scsi_Tape * STp; if (os_scsi_tapes && (STp = os_scsi_tapes[dev])) { if ((STp->buffer)->writing && (SCpnt->sense_buffer[0] & 0x70) == 0x70 && (SCpnt->sense_buffer[2] & 0x40)) { /* EOM at write-behind, has all been written? */ if ((SCpnt->sense_buffer[2] & 0x0f) == VOLUME_OVERFLOW) (STp->buffer)->midlevel_result = SCpnt->result; /* Error */ else (STp->buffer)->midlevel_result = INT_MAX; /* OK */ } else (STp->buffer)->midlevel_result = SCpnt->result; SCpnt->request.rq_status = RQ_SCSI_DONE; (STp->buffer)->last_SRpnt = SCpnt->sc_request; #if DEBUG STp->write_pending = 0; #endif complete(SCpnt->request.waiting); } #if DEBUG else if (debugging) printk(OSST_DEB_MSG "osst?:D: Illegal interrupt device %x\n", dev); #endif } /* Do the scsi command. Waits until command performed if do_wait is true. Otherwise osst_write_behind_check() is used to check that the command has finished. */ static Scsi_Request * osst_do_scsi(Scsi_Request *SRpnt, OS_Scsi_Tape *STp, unsigned char *cmd, int bytes, int direction, int timeout, int retries, int do_wait) { unsigned char *bp; #ifdef OSST_INJECT_ERRORS static int inject = 0; static int repeat = 0; #endif if (SRpnt == NULL) { if ((SRpnt = scsi_allocate_request(STp->device)) == NULL) { printk(KERN_ERR "osst%d:E: Can't get SCSI request.\n", TAPE_NR(STp->devt)); if (signal_pending(current)) (STp->buffer)->syscall_result = (-EINTR); else (STp->buffer)->syscall_result = (-EBUSY); return NULL; } } if (SRpnt->sr_device->scsi_level <= SCSI_2) cmd[1] |= (SRpnt->sr_device->lun << 5) & 0xe0; init_completion(&STp->wait); SRpnt->sr_use_sg = (bytes > (STp->buffer)->sg[0].length) ? (STp->buffer)->use_sg : 0; if (SRpnt->sr_use_sg) { bp = (char *)&(STp->buffer->sg[0]); if (STp->buffer->sg_segs < SRpnt->sr_use_sg) SRpnt->sr_use_sg = STp->buffer->sg_segs; } else bp = (STp->buffer)->b_data; SRpnt->sr_data_direction = direction; SRpnt->sr_cmd_len = 0; SRpnt->sr_request.waiting = &(STp->wait); SRpnt->sr_request.rq_status = RQ_SCSI_BUSY; SRpnt->sr_request.rq_dev = STp->devt; scsi_do_req(SRpnt, (void *)cmd, bp, bytes, osst_sleep_done, timeout, retries); if (do_wait) { wait_for_completion(SRpnt->sr_request.waiting); SRpnt->sr_request.waiting = NULL; STp->buffer->syscall_result = osst_chk_result(STp, SRpnt); #ifdef OSST_INJECT_ERRORS if (STp->buffer->syscall_result == 0 && cmd[0] == READ_6 && cmd[4] && ( (++ inject % 83) == 29 || (STp->first_frame_position == 240 /* or STp->read_error_frame to fail again on the block calculated above */ && ++repeat < 3))) { printk(OSST_DEB_MSG "osst%d:D: Injecting read error\n", TAPE_NR(STp->devt)); STp->buffer->last_result_fatal = 1; } #endif } return SRpnt; } /* Handle the write-behind checking (downs the semaphore) */ static void osst_write_behind_check(OS_Scsi_Tape *STp) { OSST_buffer * STbuffer; STbuffer = STp->buffer; #if DEBUG if (STp->write_pending) STp->nbr_waits++; else STp->nbr_finished++; #endif wait_for_completion(&(STp->wait)); (STp->buffer)->last_SRpnt->sr_request.waiting = NULL; STp->buffer->syscall_result = osst_chk_result(STp, STp->buffer->last_SRpnt); if ((STp->buffer)->syscall_result) (STp->buffer)->syscall_result = osst_write_error_recovery(STp, &((STp->buffer)->last_SRpnt), 1); else STp->first_frame_position++; scsi_release_request((STp->buffer)->last_SRpnt); if (STbuffer->writing < STbuffer->buffer_bytes) printk(KERN_WARNING "osst:A: write_behind_check: something left in buffer!\n"); STbuffer->buffer_bytes -= STbuffer->writing; STbuffer->writing = 0; return; } /* Onstream specific Routines */ /* * Initialize the OnStream AUX */ static void osst_init_aux(OS_Scsi_Tape * STp, int frame_type, int frame_seq_number, int logical_blk_num, int blk_sz, int blk_cnt) { os_aux_t *aux = STp->buffer->aux; os_partition_t *par = &aux->partition; os_dat_t *dat = &aux->dat; if (STp->raw) return; memset(aux, 0, sizeof(*aux)); aux->format_id = htonl(0); memcpy(aux->application_sig, "LIN4", 4); aux->hdwr = htonl(0); aux->frame_type = frame_type; switch (frame_type) { case OS_FRAME_TYPE_HEADER: aux->update_frame_cntr = htonl(STp->update_frame_cntr); par->partition_num = OS_CONFIG_PARTITION; par->par_desc_ver = OS_PARTITION_VERSION; par->wrt_pass_cntr = htons(0xffff); /* 0-4 = reserved, 5-9 = header, 2990-2994 = header, 2995-2999 = reserved */ par->first_frame_ppos = htonl(0); par->last_frame_ppos = htonl(0xbb7); aux->frame_seq_num = htonl(0); aux->logical_blk_num_high = htonl(0); aux->logical_blk_num = htonl(0); aux->next_mark_ppos = htonl(STp->first_mark_ppos); break; case OS_FRAME_TYPE_DATA: case OS_FRAME_TYPE_MARKER: dat->dat_sz = 8; dat->reserved1 = 0; dat->entry_cnt = 1; dat->reserved3 = 0; dat->dat_list[0].blk_sz = htonl(blk_sz); dat->dat_list[0].blk_cnt = htons(blk_cnt); dat->dat_list[0].flags = frame_type==OS_FRAME_TYPE_MARKER? OS_DAT_FLAGS_MARK:OS_DAT_FLAGS_DATA; dat->dat_list[0].reserved = 0; case OS_FRAME_TYPE_EOD: aux->update_frame_cntr = htonl(0); par->partition_num = OS_DATA_PARTITION; par->par_desc_ver = OS_PARTITION_VERSION; par->wrt_pass_cntr = htons(STp->wrt_pass_cntr); par->first_frame_ppos = htonl(STp->first_data_ppos); par->last_frame_ppos = htonl(STp->capacity); aux->frame_seq_num = htonl(frame_seq_number); aux->logical_blk_num_high = htonl(0); aux->logical_blk_num = htonl(logical_blk_num); break; default: ; /* probably FILL */ } aux->filemark_cnt = ntohl(STp->filemark_cnt); aux->phys_fm = ntohl(0xffffffff); aux->last_mark_ppos = ntohl(STp->last_mark_ppos); aux->last_mark_lbn = ntohl(STp->last_mark_lbn); } /* * Verify that we have the correct tape frame */ static int osst_verify_frame(OS_Scsi_Tape * STp, int frame_seq_number, int quiet) { os_aux_t * aux = STp->buffer->aux; os_partition_t * par = &(aux->partition); ST_partstat * STps = &(STp->ps[STp->partition]); int dev = TAPE_NR(STp->devt); int blk_cnt, blk_sz, i; if (STp->raw) { if (STp->buffer->syscall_result) { for (i=0; i < STp->buffer->sg_segs; i++) memset(STp->buffer->sg[i].address, 0, STp->buffer->sg[i].length); strcpy(STp->buffer->b_data, "READ ERROR ON FRAME"); } else STp->buffer->buffer_bytes = OS_FRAME_SIZE; return 1; } if (STp->buffer->syscall_result) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping frame, read error\n", dev); #endif return 0; } if (ntohl(aux->format_id) != 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping frame, format_id %u\n", dev, ntohl(aux->format_id)); #endif goto err_out; } if (memcmp(aux->application_sig, STp->application_sig, 4) != 0 && (memcmp(aux->application_sig, "LIN3", 4) != 0 || STp->linux_media_version != 4)) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping frame, incorrect application signature\n", dev); #endif goto err_out; } if (par->partition_num != OS_DATA_PARTITION) { if (!STp->linux_media || STp->linux_media_version != 2) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping frame, partition num %d\n", dev, par->partition_num); #endif goto err_out; } } if (par->par_desc_ver != OS_PARTITION_VERSION) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping frame, partition version %d\n", dev, par->par_desc_ver); #endif goto err_out; } if (ntohs(par->wrt_pass_cntr) != STp->wrt_pass_cntr) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping frame, wrt_pass_cntr %d (expected %d)\n", dev, ntohs(par->wrt_pass_cntr), STp->wrt_pass_cntr); #endif goto err_out; } if (aux->frame_type != OS_FRAME_TYPE_DATA && aux->frame_type != OS_FRAME_TYPE_EOD && aux->frame_type != OS_FRAME_TYPE_MARKER) { if (!quiet) #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping frame, frame type %x\n", dev, aux->frame_type); #endif goto err_out; } if (aux->frame_type == OS_FRAME_TYPE_EOD && STp->first_frame_position < STp->eod_frame_ppos) { printk(KERN_INFO "osst%d:I: Skipping premature EOD frame %d\n", dev, STp->first_frame_position); goto err_out; } STp->frame_in_buffer = 1; if (frame_seq_number != -1 && ntohl(aux->frame_seq_num) != frame_seq_number) { if (!quiet) #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping frame, sequence number %u (expected %d)\n", dev, ntohl(aux->frame_seq_num), frame_seq_number); #endif goto err_out; } if (aux->frame_type == OS_FRAME_TYPE_MARKER) { STps->eof = ST_FM_HIT; i = ntohl(aux->filemark_cnt); if (STp->header_cache != NULL && i < OS_FM_TAB_MAX && (i > STp->filemark_cnt || STp->first_frame_position - 1 != ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i]))) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: %s filemark %d at frame pos %d\n", dev, STp->header_cache->dat_fm_tab.fm_tab_ent[i] == 0?"Learned":"Corrected", i, STp->first_frame_position - 1); #endif STp->header_cache->dat_fm_tab.fm_tab_ent[i] = htonl(STp->first_frame_position - 1); if (i >= STp->filemark_cnt) STp->filemark_cnt = i+1; } } if (aux->frame_type == OS_FRAME_TYPE_EOD) { STps->eof = ST_EOD_1; } if (aux->frame_type == OS_FRAME_TYPE_DATA) { blk_cnt = ntohs(aux->dat.dat_list[0].blk_cnt); blk_sz = ntohl(aux->dat.dat_list[0].blk_sz); STp->buffer->buffer_bytes = blk_cnt * blk_sz; STp->buffer->read_pointer = 0; /* See what block size was used to write file */ if (STp->block_size != blk_sz && blk_sz > 0) { printk(KERN_INFO "osst%d:I: File was written with block size %d%c, currently %d%c, adjusted to match.\n", dev, blk_sz<1024?blk_sz:blk_sz/1024,blk_sz<1024?'b':'k', STp->block_size<1024?STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k'); STp->block_size = blk_sz; STp->buffer->buffer_blocks = OS_DATA_SIZE / blk_sz; } STps->eof = ST_NOEOF; } STp->frame_seq_number = ntohl(aux->frame_seq_num); STp->logical_blk_num = ntohl(aux->logical_blk_num); return 1; err_out: if (STp->read_error_frame == 0) STp->read_error_frame = STp->first_frame_position - 1; return 0; } /* * Wait for the unit to become Ready */ static int osst_wait_ready(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, unsigned timeout) { unsigned char cmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt; long startwait = jiffies; #if DEBUG int dbg = debugging; int dev = TAPE_NR(STp->devt); printk(OSST_DEB_MSG "osst%d:D: Reached onstream wait ready\n", dev); #endif memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = TEST_UNIT_READY; SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_READY_RETRIES, TRUE); *aSRpnt = SRpnt; if (!SRpnt) return (-EBUSY); while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) && (( SRpnt->sr_sense_buffer[2] == 2 && SRpnt->sr_sense_buffer[12] == 4 && (SRpnt->sr_sense_buffer[13] == 1 || SRpnt->sr_sense_buffer[13] == 8) ) || ( SRpnt->sr_sense_buffer[2] == 6 && SRpnt->sr_sense_buffer[12] == 0x28 && SRpnt->sr_sense_buffer[13] == 0 ) )) { #if DEBUG if (debugging) { printk(OSST_DEB_MSG "osst%d:D: Sleeping in onstream wait ready\n", dev); printk(OSST_DEB_MSG "osst%d:D: Turning off debugging for a while\n", dev); debugging = 0; } #endif set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(HZ / 10); memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = TEST_UNIT_READY; SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_READY_RETRIES, TRUE); } *aSRpnt = SRpnt; #if DEBUG debugging = dbg; #endif if ( STp->buffer->syscall_result && osst_write_error_recovery(STp, aSRpnt, 0) ) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Abnormal exit from onstream wait ready\n", dev); printk(OSST_DEB_MSG "osst%d:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", dev, STp->buffer->syscall_result, SRpnt->sr_sense_buffer[0], SRpnt->sr_sense_buffer[2], SRpnt->sr_sense_buffer[12], SRpnt->sr_sense_buffer[13]); #endif return (-EIO); } #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Normal exit from onstream wait ready\n", dev); #endif return 0; } /* * Wait for a tape to be inserted in the unit */ static int osst_wait_for_medium(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, unsigned timeout) { unsigned char cmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt; long startwait = jiffies; #if DEBUG int dbg = debugging; int dev = TAPE_NR(STp->devt); printk(OSST_DEB_MSG "osst%d:D: Reached onstream wait for medium\n", dev); #endif memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = TEST_UNIT_READY; SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_READY_RETRIES, TRUE); *aSRpnt = SRpnt; if (!SRpnt) return (-EBUSY); while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) && SRpnt->sr_sense_buffer[2] == 2 && SRpnt->sr_sense_buffer[12] == 0x3a && SRpnt->sr_sense_buffer[13] == 0 ) { #if DEBUG if (debugging) { printk(OSST_DEB_MSG "osst%d:D: Sleeping in onstream wait medium\n", dev); printk(OSST_DEB_MSG "osst%d:D: Turning off debugging for a while\n", dev); debugging = 0; } #endif set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(HZ / 10); memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = TEST_UNIT_READY; SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_READY_RETRIES, TRUE); } *aSRpnt = SRpnt; #if DEBUG debugging = dbg; #endif if ( STp->buffer->syscall_result && SRpnt->sr_sense_buffer[2] != 2 && SRpnt->sr_sense_buffer[12] != 4 && SRpnt->sr_sense_buffer[13] == 1) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Abnormal exit from onstream wait medium\n", dev); printk(OSST_DEB_MSG "osst%d:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", dev, STp->buffer->syscall_result, SRpnt->sr_sense_buffer[0], SRpnt->sr_sense_buffer[2], SRpnt->sr_sense_buffer[12], SRpnt->sr_sense_buffer[13]); #endif return 0; } #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Normal exit from onstream wait medium\n", dev); #endif return 1; } static int osst_position_tape_and_confirm(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int frame) { int retval; osst_wait_ready(STp, aSRpnt, 15 * 60); /* TODO - can this catch a write error? */ retval = osst_set_frame_position(STp, aSRpnt, frame, 0); if (retval) return (retval); osst_wait_ready(STp, aSRpnt, 15 * 60); return (osst_get_frame_position(STp, aSRpnt)); } /* * Wait for write(s) to complete */ static int osst_flush_drive_buffer(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt) { unsigned char cmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt; int result = 0; #if DEBUG int dev = TAPE_NR(STp->devt); printk(OSST_DEB_MSG "osst%d:D: Reached onstream flush drive buffer (write filemark)\n", dev); #endif memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = WRITE_FILEMARKS; cmd[1] = 1; SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_WRITE_RETRIES, TRUE); *aSRpnt = SRpnt; if (!SRpnt) return (-EBUSY); if ((STp->buffer)->syscall_result) result = osst_write_error_recovery(STp, aSRpnt, 0); result |= osst_wait_ready(STp, aSRpnt, 5 * 60); STp->ps[STp->partition].rw = OS_WRITING_COMPLETE; return (result); } #define OSST_POLL_PER_SEC 10 static int osst_wait_frame(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int curr, int minlast, int to) { long startwait = jiffies; int dev = TAPE_NR(STp->devt); #if DEBUG char notyetprinted = 1; #endif if (minlast >= 0 && STp->ps[STp->partition].rw != ST_READING) printk(KERN_ERR "osst%i:A: Waiting for frame without having initialized read!\n", dev); while (time_before (jiffies, startwait + to*HZ)) { int result; result = osst_get_frame_position (STp, aSRpnt); if (result == -EIO) if ((result = osst_write_error_recovery(STp, aSRpnt, 0)) == 0) return 0; /* successful recovery leaves drive ready for frame */ if (result < 0) break; if (STp->first_frame_position == curr && ((minlast < 0 && (signed)STp->last_frame_position > (signed)curr + minlast) || (minlast >= 0 && STp->cur_frames > minlast) ) && result >= 0) { #if DEBUG if (debugging || jiffies - startwait >= 2*HZ/OSST_POLL_PER_SEC) printk (OSST_DEB_MSG "osst%d:D: Succ wait f fr %i (>%i): %i-%i %i (%i): %3li.%li s\n", dev, curr, curr+minlast, STp->first_frame_position, STp->last_frame_position, STp->cur_frames, result, (jiffies-startwait)/HZ, (((jiffies-startwait)%HZ)*10)/HZ); #endif return 0; } #if DEBUG if (jiffies - startwait >= 2*HZ/OSST_POLL_PER_SEC && notyetprinted) { printk (OSST_DEB_MSG "osst%d:D: Wait for frame %i (>%i): %i-%i %i (%i)\n", dev, curr, curr+minlast, STp->first_frame_position, STp->last_frame_position, STp->cur_frames, result); notyetprinted--; } #endif set_current_state(TASK_INTERRUPTIBLE); schedule_timeout (HZ / OSST_POLL_PER_SEC); } #if DEBUG printk (OSST_DEB_MSG "osst%d:D: Fail wait f fr %i (>%i): %i-%i %i: %3li.%li s\n", dev, curr, curr+minlast, STp->first_frame_position, STp->last_frame_position, STp->cur_frames, (jiffies-startwait)/HZ, (((jiffies-startwait)%HZ)*10)/HZ); #endif return -EBUSY; } /* * Read the next OnStream tape frame at the current location */ static int osst_read_frame(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int timeout) { unsigned char cmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt; int retval = 0; #if DEBUG os_aux_t * aux = STp->buffer->aux; int dev = TAPE_NR(STp->devt); #endif /* TODO: Error handling */ if (STp->poll) retval = osst_wait_frame (STp, aSRpnt, STp->first_frame_position, 0, timeout); #if 0// DEBUG printk ("osst_read: wait for frame returned %i\n", retval); #endif memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = READ_6; cmd[1] = 1; cmd[4] = 1; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Reading frame from OnStream tape\n", dev); #endif SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, SCSI_DATA_READ, STp->timeout, MAX_RETRIES, TRUE); *aSRpnt = SRpnt; if (!SRpnt) return (-EBUSY); if ((STp->buffer)->syscall_result) { retval = 1; if (STp->read_error_frame == 0) { STp->read_error_frame = STp->first_frame_position; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Recording read error at %d\n", dev, STp->read_error_frame); #endif } #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n", dev, SRpnt->sr_sense_buffer[0], SRpnt->sr_sense_buffer[1], SRpnt->sr_sense_buffer[2], SRpnt->sr_sense_buffer[3], SRpnt->sr_sense_buffer[4], SRpnt->sr_sense_buffer[5], SRpnt->sr_sense_buffer[6], SRpnt->sr_sense_buffer[7]); #endif } else STp->first_frame_position++; #if DEBUG if (debugging) { printk(OSST_DEB_MSG "osst%d:D: AUX: %c%c%c%c UpdFrCt#%d Wpass#%d %s FrSeq#%d LogBlk#%d Qty=%d Sz=%d\n", dev, aux->application_sig[0], aux->application_sig[1], aux->application_sig[2], aux->application_sig[3], ntohl(aux->update_frame_cntr), ntohs(aux->partition.wrt_pass_cntr), aux->frame_type==1?"EOD":aux->frame_type==2?"MARK": aux->frame_type==8?"HEADR":aux->frame_type==0x80?"DATA":"FILL", ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num), ntohs(aux->dat.dat_list[0].blk_cnt), ntohl(aux->dat.dat_list[0].blk_sz) ); if (aux->frame_type==2) printk(OSST_DEB_MSG "osst%d:D: mark_cnt=%d, last_mark_ppos=%d, last_mark_lbn=%d\n", dev, ntohl(aux->filemark_cnt), ntohl(aux->last_mark_ppos), ntohl(aux->last_mark_lbn)); printk(OSST_DEB_MSG "osst%d:D: Exit read frame from OnStream tape with code %d\n", dev, retval); } #endif return (retval); } static int osst_initiate_read(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt) { ST_partstat * STps = &(STp->ps[STp->partition]); Scsi_Request * SRpnt ; unsigned char cmd[MAX_COMMAND_SIZE]; int retval = 0; #if DEBUG int dev = TAPE_NR(STp->devt); #endif if (STps->rw != ST_READING) { /* Initialize read operation */ if (STps->rw == ST_WRITING) { osst_flush_write_buffer(STp, aSRpnt); osst_flush_drive_buffer(STp, aSRpnt); } STps->rw = ST_READING; STp->frame_in_buffer = 0; /* * Issue a read 0 command to get the OnStream drive * read frames into its buffer. */ memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = READ_6; cmd[1] = 1; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Start Read Ahead on OnStream tape\n", dev); #endif SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_RETRIES, TRUE); *aSRpnt = SRpnt; retval = STp->buffer->syscall_result; } return retval; } static int osst_get_logical_frame(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int frame_seq_number, int quiet) { ST_partstat * STps = &(STp->ps[STp->partition]); int dev = TAPE_NR(STp->devt); int cnt = 0, bad = 0, past = 0, x, position; /* * Search and wait for the next logical tape frame */ while (1) { if (cnt++ > 400) { printk(KERN_ERR "osst%d:E: Couldn't find logical frame %d, aborting\n", dev, frame_seq_number); if (STp->read_error_frame) { osst_set_frame_position(STp, aSRpnt, STp->read_error_frame, 0); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Repositioning tape to bad frame %d\n", dev, STp->read_error_frame); #endif STp->read_error_frame = 0; } return (-EIO); } #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Looking for frame %d, attempt %d\n", dev, frame_seq_number, cnt); #endif if ( osst_initiate_read(STp, aSRpnt) || ( (!STp->frame_in_buffer) && osst_read_frame(STp, aSRpnt, 30) ) ) { if (STp->raw) return (-EIO); position = osst_get_frame_position(STp, aSRpnt); if (position >= 0xbae && position < 0xbb8) position = 0xbb8; else if (position > STp->eod_frame_ppos || ++bad == 10) { position = STp->read_error_frame - 1; } else { position += 39; cnt += 20; } #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Bad frame detected, positioning tape to block %d\n", dev, position); #endif osst_set_frame_position(STp, aSRpnt, position, 0); continue; } if (osst_verify_frame(STp, frame_seq_number, quiet)) break; if (osst_verify_frame(STp, -1, quiet)) { x = ntohl(STp->buffer->aux->frame_seq_num); if (STp->fast_open) { printk(KERN_WARNING "osst%d:W: Found logical frame %d instead of %d after fast open\n", dev, x, frame_seq_number); STp->header_ok = 0; STp->read_error_frame = 0; return (-EIO); } if (x > frame_seq_number) { if (++past > 3) { /* positioning backwards did not bring us to the desired frame */ position = STp->read_error_frame - 1; } else { position = osst_get_frame_position(STp, aSRpnt) + frame_seq_number - x - 1; if (STp->first_frame_position >= 3000 && position < 3000) position -= 10; } #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Found logical frame %d while looking for %d: back up %d\n", dev, x, frame_seq_number, STp->first_frame_position - position); #endif osst_set_frame_position(STp, aSRpnt, position, 0); cnt += 10; } else past = 0; } if (osst_get_frame_position(STp, aSRpnt) == 0xbaf) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping config partition\n", dev); #endif osst_set_frame_position(STp, aSRpnt, 0xbb8, 0); cnt--; } STp->frame_in_buffer = 0; } if (cnt > 1) { STp->recover_count++; STp->recover_erreg++; printk(KERN_WARNING "osst%d:I: Don't worry, Read error at position %d recovered\n", dev, STp->read_error_frame); } STp->read_count++; #if DEBUG if (debugging || STps->eof) printk(OSST_DEB_MSG "osst%d:D: Exit get logical frame (%d=>%d) from OnStream tape with code %d\n", dev, frame_seq_number, STp->frame_seq_number, STps->eof); #endif STp->fast_open = FALSE; STp->read_error_frame = 0; return (STps->eof); } static int osst_seek_logical_blk(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int logical_blk_num) { ST_partstat * STps = &(STp->ps[STp->partition]); int dev = TAPE_NR(STp->devt); int retries = 0; int frame_seq_estimate, ppos_estimate, move; if (logical_blk_num < 0) logical_blk_num = 0; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Seeking logical block %d (now at %d, size %d%c)\n", dev, logical_blk_num, STp->logical_blk_num, STp->block_size<1024?STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k'); #endif /* Do we know where we are? */ if (STps->drv_block >= 0) { move = logical_blk_num - STp->logical_blk_num; if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1; move /= (OS_DATA_SIZE / STp->block_size); frame_seq_estimate = STp->frame_seq_number + move; } else frame_seq_estimate = logical_blk_num * STp->block_size / OS_DATA_SIZE; if (frame_seq_estimate < 2980) ppos_estimate = frame_seq_estimate + 10; else ppos_estimate = frame_seq_estimate + 20; while (++retries < 10) { if (ppos_estimate > STp->eod_frame_ppos-2) { frame_seq_estimate += STp->eod_frame_ppos - 2 - ppos_estimate; ppos_estimate = STp->eod_frame_ppos - 2; } if (frame_seq_estimate < 0) { frame_seq_estimate = 0; ppos_estimate = 10; } osst_set_frame_position(STp, aSRpnt, ppos_estimate, 0); if (osst_get_logical_frame(STp, aSRpnt, frame_seq_estimate, 1) >= 0) { /* we've located the estimated frame, now does it have our block? */ if (logical_blk_num < STp->logical_blk_num || logical_blk_num >= STp->logical_blk_num + ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt)) { if (STps->eof == ST_FM_HIT) move = logical_blk_num < STp->logical_blk_num? -2 : 1; else { move = logical_blk_num - STp->logical_blk_num; if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1; move /= (OS_DATA_SIZE / STp->block_size); } #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d) move %d\n", dev, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate, STp->logical_blk_num, logical_blk_num, move); #endif frame_seq_estimate += move; ppos_estimate += move; continue; } else { STp->buffer->read_pointer = (logical_blk_num - STp->logical_blk_num) * STp->block_size; STp->buffer->buffer_bytes -= STp->buffer->read_pointer; STp->logical_blk_num = logical_blk_num; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Seek success at ppos %d fsq %d in_buf %d, bytes %d, ptr %d*%d\n", dev, ppos_estimate, STp->frame_seq_number, STp->frame_in_buffer, STp->buffer->buffer_bytes, STp->buffer->read_pointer / STp->block_size, STp->block_size); #endif STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt); if (STps->eof == ST_FM_HIT) { STps->drv_file++; STps->drv_block = 0; } else { STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)? STp->logical_blk_num - (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0): -1; } STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF; return 0; } } if (osst_get_logical_frame(STp, aSRpnt, -1, 1) < 0) goto error; /* we are not yet at the estimated frame, adjust our estimate of its physical position */ #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d)\n", dev, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate, STp->logical_blk_num, logical_blk_num); #endif if (frame_seq_estimate != STp->frame_seq_number) ppos_estimate += frame_seq_estimate - STp->frame_seq_number; else break; } error: printk(KERN_ERR "osst%d:E: Couldn't seek to logical block %d (at %d), %d retries\n", dev, logical_blk_num, STp->logical_blk_num, retries); return (-EIO); } /* The values below are based on the OnStream frame payload size of 32K == 2**15, * that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block * size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions * inside each frame. Finaly, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1. */ #define OSST_FRAME_SHIFT 6 #define OSST_SECTOR_SHIFT 9 #define OSST_SECTOR_MASK 0x03F static int osst_get_sector(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt) { int sector; #if DEBUG int dev = TAPE_NR(STp->devt); printk(OSST_DEB_MSG "osst%d:D: Positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, %cptr %d, eof %d\n", dev, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num, STp->ps[STp->partition].drv_file, STp->ps[STp->partition].drv_block, STp->ps[STp->partition].rw == ST_WRITING?'w':'r', STp->ps[STp->partition].rw == ST_WRITING?STp->buffer->buffer_bytes: STp->buffer->read_pointer, STp->ps[STp->partition].eof); #endif /* do we know where we are inside a file? */ if (STp->ps[STp->partition].drv_block >= 0) { sector = (STp->frame_in_buffer ? STp->first_frame_position-1 : STp->first_frame_position) << OSST_FRAME_SHIFT; if (STp->ps[STp->partition].rw == ST_WRITING) sector |= (STp->buffer->buffer_bytes >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK; else sector |= (STp->buffer->read_pointer >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK; } else { sector = osst_get_frame_position(STp, aSRpnt); if (sector > 0) sector <<= OSST_FRAME_SHIFT; } return sector; } static int osst_seek_sector(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int sector) { ST_partstat * STps = &(STp->ps[STp->partition]); int frame = sector >> OSST_FRAME_SHIFT, offset = (sector & OSST_SECTOR_MASK) << OSST_SECTOR_SHIFT, r; #if DEBUG int dev = TAPE_NR(STp->devt); printk(OSST_DEB_MSG "osst%d:D: Seeking sector %d in frame %d at offset %d\n", dev, sector, frame, offset); #endif if (frame < 0 || frame >= STp->capacity) return (-ENXIO); if (frame <= STp->first_data_ppos) { STp->frame_seq_number = STp->logical_blk_num = STps->drv_file = STps->drv_block = 0; return (osst_set_frame_position(STp, aSRpnt, frame, 0)); } r = osst_set_frame_position(STp, aSRpnt, offset?frame:frame-1, 0); if (r < 0) return r; r = osst_get_logical_frame(STp, aSRpnt, -1, 1); if (r < 0) return r; if (osst_get_frame_position(STp, aSRpnt) != (offset?frame+1:frame)) return (-EIO); if (offset) { STp->logical_blk_num += offset / STp->block_size; STp->buffer->read_pointer = offset; STp->buffer->buffer_bytes -= offset; } else { STp->frame_seq_number++; STp->frame_in_buffer = 0; STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0; } STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt); if (STps->eof == ST_FM_HIT) { STps->drv_file++; STps->drv_block = 0; } else { STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)? STp->logical_blk_num - (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0): -1; } STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Now positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, rptr %d, eof %d\n", dev, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num, STps->drv_file, STps->drv_block, STp->buffer->read_pointer, STps->eof); #endif return 0; } /* * Read back the drive's internal buffer contents, as a part * of the write error recovery mechanism for old OnStream * firmware revisions. * Precondition for this function to work: all frames in the * drive's buffer must be of one type (DATA, MARK or EOD)! */ static int osst_read_back_buffer_and_rewrite(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, unsigned int frame, unsigned int skip, int pending) { Scsi_Request * SRpnt = * aSRpnt; unsigned char * buffer, * p; unsigned char cmd[MAX_COMMAND_SIZE]; int flag, new_frame, i; int nframes = STp->cur_frames; int blks_per_frame = ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); int frame_seq_number = ntohl(STp->buffer->aux->frame_seq_num) - (nframes + pending - 1); int logical_blk_num = ntohl(STp->buffer->aux->logical_blk_num) - (nframes + pending - 1) * blks_per_frame; int dev = TAPE_NR(STp->devt); long startwait = jiffies; #if DEBUG int dbg = debugging; #endif if ((buffer = (unsigned char *)vmalloc((nframes + 1) * OS_DATA_SIZE)) == NULL) return (-EIO); printk(KERN_INFO "osst%d:I: Reading back %d frames from drive buffer%s\n", dev, nframes, pending?" and one that was pending":""); osst_copy_from_buffer(STp->buffer, (p = &buffer[nframes * OS_DATA_SIZE])); #if DEBUG if (pending && debugging) printk(OSST_DEB_MSG "osst%d:D: Pending frame %d (lblk %d), data %02x %02x %02x %02x\n", dev, frame_seq_number + nframes, logical_blk_num + nframes * blks_per_frame, p[0], p[1], p[2], p[3]); #endif for (i = 0, p = buffer; i < nframes; i++, p += OS_DATA_SIZE) { memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = 0x3C; /* Buffer Read */ cmd[1] = 6; /* Retrieve Faulty Block */ cmd[7] = 32768 >> 8; cmd[8] = 32768 & 0xff; SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, SCSI_DATA_READ, STp->timeout, MAX_RETRIES, TRUE); if ((STp->buffer)->syscall_result || !SRpnt) { printk(KERN_ERR "osst%d:E: Failed to read frame back from OnStream buffer\n", dev); vfree((void *)buffer); *aSRpnt = SRpnt; return (-EIO); } osst_copy_from_buffer(STp->buffer, p); #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Read back logical frame %d, data %02x %02x %02x %02x\n", dev, frame_seq_number + i, p[0], p[1], p[2], p[3]); #endif } *aSRpnt = SRpnt; osst_get_frame_position(STp, aSRpnt); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Frames left in buffer: %d\n", dev, STp->cur_frames); #endif /* Write synchronously so we can be sure we're OK again and don't have to recover recursively */ /* In the header we don't actually re-write the frames that fail, just the ones after them */ for (flag=1, new_frame=frame, p=buffer, i=0; i < nframes + pending; ) { if (flag) { if (STp->write_type == OS_WRITE_HEADER) { i += skip; p += skip * OS_DATA_SIZE; } else if (new_frame < 2990 && new_frame+skip+nframes+pending >= 2990) new_frame = 3000-i; else new_frame += skip; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Position to frame %d, write fseq %d\n", dev, new_frame+i, frame_seq_number+i); #endif osst_set_frame_position(STp, aSRpnt, new_frame + i, 0); osst_wait_ready(STp, aSRpnt, 60); osst_get_frame_position(STp, aSRpnt); SRpnt = * aSRpnt; if (new_frame > frame + 1000) { printk(KERN_ERR "osst%d:E: Failed to find writable tape media\n", dev); vfree((void *)buffer); return (-EIO); } flag = 0; if ( i >= nframes + pending ) break; } osst_copy_to_buffer(STp->buffer, p); /* * IMPORTANT: for error recovery to work, _never_ queue frames with mixed frame type! */ osst_init_aux(STp, STp->buffer->aux->frame_type, frame_seq_number+i, logical_blk_num + i*blks_per_frame, ntohl(STp->buffer->aux->dat.dat_list[0].blk_sz), blks_per_frame); memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = WRITE_6; cmd[1] = 1; cmd[4] = 1; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: About to write frame %d, seq %d, lbn %d, data %02x %02x %02x %02x\n", dev, new_frame+i, frame_seq_number+i, logical_blk_num + i*blks_per_frame, p[0], p[1], p[2], p[3]); #endif SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, SCSI_DATA_WRITE, STp->timeout, MAX_WRITE_RETRIES, TRUE); if (STp->buffer->syscall_result) flag = 1; else { p += OS_DATA_SIZE; i++; /* if we just sent the last frame, wait till all successfully written */ if ( i == nframes + pending ) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Check re-write successful\n", dev); #endif memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = WRITE_FILEMARKS; cmd[1] = 1; SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_WRITE_RETRIES, TRUE); #if DEBUG if (debugging) { printk(OSST_DEB_MSG "osst%d:D: Sleeping in re-write wait ready\n", dev); printk(OSST_DEB_MSG "osst%d:D: Turning off debugging for a while\n", dev); debugging = 0; } #endif flag = STp->buffer->syscall_result; while ( !flag && time_before(jiffies, startwait + 60*HZ) ) { memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = TEST_UNIT_READY; SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_READY_RETRIES, TRUE); if (SRpnt->sr_sense_buffer[2] == 2 && SRpnt->sr_sense_buffer[12] == 4 && (SRpnt->sr_sense_buffer[13] == 1 || SRpnt->sr_sense_buffer[13] == 8)) { /* in the process of becoming ready */ schedule_timeout(HZ / 10); continue; } if (STp->buffer->syscall_result) flag = 1; break; } #if DEBUG debugging = dbg; printk(OSST_DEB_MSG "osst%d:D: Wait re-write finished\n", dev); #endif } } *aSRpnt = SRpnt; if (flag) { if ((SRpnt->sr_sense_buffer[ 2] & 0x0f) == 13 && SRpnt->sr_sense_buffer[12] == 0 && SRpnt->sr_sense_buffer[13] == 2) { printk(KERN_ERR "osst%d:E: Volume overflow in write error recovery\n", dev); vfree((void *)buffer); return (-EIO); /* hit end of tape = fail */ } i = ((SRpnt->sr_sense_buffer[3] << 24) | (SRpnt->sr_sense_buffer[4] << 16) | (SRpnt->sr_sense_buffer[5] << 8) | SRpnt->sr_sense_buffer[6] ) - new_frame; p = &buffer[i * OS_DATA_SIZE]; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Additional write error at %d\n", dev, new_frame+i); #endif osst_get_frame_position(STp, aSRpnt); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: reported frame positions: host = %d, tape = %d\n", dev, STp->first_frame_position, STp->last_frame_position); #endif } } if (!pending) osst_copy_to_buffer(STp->buffer, p); /* so buffer content == at entry in all cases */ vfree((void *)buffer); return 0; } static int osst_reposition_and_retry(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, unsigned int frame, unsigned int skip, int pending) { unsigned char cmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt; int dev = TAPE_NR(STp->devt); int expected = 0; int attempts = 1000 / skip; int flag = 1; long startwait = jiffies; #if DEBUG int dbg = debugging; #endif while (attempts && time_before(jiffies, startwait + 60*HZ)) { if (flag) { #if DEBUG debugging = dbg; #endif if (frame < 2990 && frame+skip+STp->cur_frames+pending >= 2990) frame = 3000-skip; expected = frame+skip+STp->cur_frames+pending; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Position to fppos %d, re-write from fseq %d\n", dev, frame+skip, STp->frame_seq_number-STp->cur_frames-pending); #endif osst_set_frame_position(STp, aSRpnt, frame + skip, 1); flag = 0; attempts--; } if (osst_get_frame_position(STp, aSRpnt) < 0) { /* additional write error */ #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Addl error, host %d, tape %d, buffer %d\n", dev, STp->first_frame_position, STp->last_frame_position, STp->cur_frames); #endif frame = STp->last_frame_position; flag = 1; continue; } if (pending && STp->cur_frames < 50) { memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = WRITE_6; cmd[1] = 1; cmd[4] = 1; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: About to write pending fseq %d at fppos %d\n", dev, STp->frame_seq_number-1, STp->first_frame_position); #endif SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, SCSI_DATA_WRITE, STp->timeout, MAX_WRITE_RETRIES, TRUE); *aSRpnt = SRpnt; if (STp->buffer->syscall_result) { /* additional write error */ if ((SRpnt->sr_sense_buffer[ 2] & 0x0f) == 13 && SRpnt->sr_sense_buffer[12] == 0 && SRpnt->sr_sense_buffer[13] == 2) { printk(KERN_ERR "osst%d:E: Volume overflow in write error recovery\n", dev); break; /* hit end of tape = fail */ } flag = 1; } else pending = 0; continue; } if (STp->cur_frames == 0) { #if DEBUG debugging = dbg; printk(OSST_DEB_MSG "osst%d:D: Wait re-write finished\n", dev); #endif if (STp->first_frame_position != expected) { printk(KERN_ERR "osst%d:A: Actual position %d - expected %d\n", dev, STp->first_frame_position, expected); return (-EIO); } return 0; } #if DEBUG if (debugging) { printk(OSST_DEB_MSG "osst%d:D: Sleeping in re-write wait ready\n", dev); printk(OSST_DEB_MSG "osst%d:D: Turning off debugging for a while\n", dev); debugging = 0; } #endif schedule_timeout(HZ / 10); } printk(KERN_ERR "osst%d:E: Failed to find valid tape media\n", dev); #if DEBUG debugging = dbg; #endif return (-EIO); } /* * Error recovery algorithm for the OnStream tape. */ static int osst_write_error_recovery(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int pending) { Scsi_Request * SRpnt = * aSRpnt; ST_partstat * STps = & STp->ps[STp->partition]; int dev = TAPE_NR(STp->devt); int retval = 0; int rw_state; unsigned int frame, skip; rw_state = STps->rw; if ((SRpnt->sr_sense_buffer[ 2] & 0x0f) != 3 || SRpnt->sr_sense_buffer[12] != 12 || SRpnt->sr_sense_buffer[13] != 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Write error recovery cannot handle %02x:%02x:%02x\n", dev, SRpnt->sr_sense_buffer[2], SRpnt->sr_sense_buffer[12], SRpnt->sr_sense_buffer[13]); #endif return (-EIO); } frame = (SRpnt->sr_sense_buffer[3] << 24) | (SRpnt->sr_sense_buffer[4] << 16) | (SRpnt->sr_sense_buffer[5] << 8) | SRpnt->sr_sense_buffer[6]; skip = SRpnt->sr_sense_buffer[9]; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Detected physical bad frame at %u, advised to skip %d\n", dev, frame, skip); #endif osst_get_frame_position(STp, aSRpnt); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: reported frame positions: host = %d, tape = %d\n", dev, STp->first_frame_position, STp->last_frame_position); #endif switch (STp->write_type) { case OS_WRITE_DATA: case OS_WRITE_EOD: case OS_WRITE_NEW_MARK: printk(KERN_WARNING "osst%d:I: Relocating %d buffered logical frames from position %u to %u\n", dev, STp->cur_frames, frame, (frame + skip > 3000 && frame < 3000)?3000:frame + skip); if (STp->os_fw_rev >= 10600) retval = osst_reposition_and_retry(STp, aSRpnt, frame, skip, pending); else retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, skip, pending); printk(KERN_WARNING "osst%d:%s: %sWrite error%srecovered\n", dev, retval?"E" :"I", retval?"" :"Don't worry, ", retval?" not ":" "); break; case OS_WRITE_LAST_MARK: printk(KERN_ERR "osst%d:E: Bad frame in update last marker, fatal\n", dev); osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0); retval = -EIO; break; case OS_WRITE_HEADER: printk(KERN_WARNING "osst%d:I: Bad frame in header partition, skipped\n", dev); retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, 1, pending); break; default: printk(KERN_INFO "osst%d:I: Bad frame in filler, ignored\n", dev); osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0); } osst_get_frame_position(STp, aSRpnt); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Positioning complete, cur_frames %d, pos %d, tape pos %d\n", dev, STp->cur_frames, STp->first_frame_position, STp->last_frame_position); printk(OSST_DEB_MSG "osst%d:D: next logical frame to write: %d\n", dev, STp->logical_blk_num); #endif if (retval == 0) { STp->recover_count++; STp->recover_erreg++; } STps->rw = rw_state; return retval; } static int osst_space_over_filemarks_backward(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int mt_op, int mt_count) { int dev = TAPE_NR(STp->devt); int cnt; int last_mark_ppos = -1; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Reached space_over_filemarks_backwards %d %d\n", dev, mt_op, mt_count); #endif if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't get logical blk num in space_filemarks_bwd\n", dev); #endif return -EIO; } if (STp->linux_media_version >= 4) { /* * direct lookup in header filemark list */ cnt = ntohl(STp->buffer->aux->filemark_cnt); if (STp->header_ok && STp->header_cache != NULL && (cnt - mt_count) >= 0 && (cnt - mt_count) < OS_FM_TAB_MAX && (cnt - mt_count) < STp->filemark_cnt && STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == STp->buffer->aux->last_mark_ppos) last_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt - mt_count]); #if DEBUG if (STp->header_cache == NULL || (cnt - mt_count) < 0 || (cnt - mt_count) >= OS_FM_TAB_MAX) printk(OSST_DEB_MSG "osst%d:D: Filemark lookup fail due to %s\n", dev, STp->header_cache == NULL?"lack of header cache":"count out of range"); else printk(OSST_DEB_MSG "osst%d:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n", dev, cnt, ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == STp->buffer->aux->last_mark_ppos))?"match":"error", mt_count, last_mark_ppos); #endif if (last_mark_ppos > 10 && last_mark_ppos < STp->eod_frame_ppos) { osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos); if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't get logical blk num in space_filemarks\n", dev); #endif return (-EIO); } if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { printk(KERN_WARNING "osst%d:W: Expected to find marker at ppos %d, not found\n", dev, last_mark_ppos); return (-EIO); } if (mt_op == MTBSFM) { STp->frame_seq_number++; STp->frame_in_buffer = 0; STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); } return 0; } #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Reverting to scan filemark backwards\n", dev); #endif } cnt = 0; while (cnt != mt_count) { last_mark_ppos = ntohl(STp->buffer->aux->last_mark_ppos); if (last_mark_ppos == -1) return (-EIO); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Positioning to last mark at %d\n", dev, last_mark_ppos); #endif osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos); cnt++; if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't get logical blk num in space_filemarks\n", dev); #endif return (-EIO); } if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { printk(KERN_WARNING "osst%d:W: Expected to find marker at ppos %d, not found\n", dev, last_mark_ppos); return (-EIO); } } if (mt_op == MTBSFM) { STp->frame_seq_number++; STp->frame_in_buffer = 0; STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); } return 0; } /* * ADRL 1.1 compatible "slow" space filemarks fwd version * * Just scans for the filemark sequentially. */ static int osst_space_over_filemarks_forward_slow(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int mt_op, int mt_count) { int cnt = 0; #if DEBUG int dev = TAPE_NR(STp->devt); printk(OSST_DEB_MSG "osst%d:D: Reached space_over_filemarks_forward_slow %d %d\n", dev, mt_op, mt_count); #endif if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't get logical blk num in space_filemarks_fwd\n", dev); #endif return (-EIO); } while (1) { if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't get logical blk num in space_filemarks\n", dev); #endif return (-EIO); } if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER) cnt++; if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: space_fwd: EOD reached\n", dev); #endif if (STp->first_frame_position > STp->eod_frame_ppos+1) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: EOD position corrected (%d=>%d)\n", dev, STp->eod_frame_ppos, STp->first_frame_position-1); #endif STp->eod_frame_ppos = STp->first_frame_position-1; } return (-EIO); } if (cnt == mt_count) break; STp->frame_in_buffer = 0; } if (mt_op == MTFSF) { STp->frame_seq_number++; STp->frame_in_buffer = 0; STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); } return 0; } /* * Fast linux specific version of OnStream FSF */ static int osst_space_over_filemarks_forward_fast(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int mt_op, int mt_count) { int dev = TAPE_NR(STp->devt); int cnt = 0, next_mark_ppos = -1; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Reached space_over_filemarks_forward_fast %d %d\n", dev, mt_op, mt_count); #endif if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't get logical blk num in space_filemarks_fwd\n", dev); #endif return (-EIO); } if (STp->linux_media_version >= 4) { /* * direct lookup in header filemark list */ cnt = ntohl(STp->buffer->aux->filemark_cnt) - 1; if (STp->header_ok && STp->header_cache != NULL && (cnt + mt_count) < OS_FM_TAB_MAX && (cnt + mt_count) < STp->filemark_cnt && ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == STp->buffer->aux->last_mark_ppos))) next_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt + mt_count]); #if DEBUG if (STp->header_cache == NULL || (cnt + mt_count) >= OS_FM_TAB_MAX) printk(OSST_DEB_MSG "osst%d:D: Filemark lookup fail due to %s\n", dev, STp->header_cache == NULL?"lack of header cache":"count out of range"); else printk(OSST_DEB_MSG "osst%d:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n", dev, cnt, ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == STp->buffer->aux->last_mark_ppos))?"match":"error", mt_count, next_mark_ppos); #endif if (next_mark_ppos <= 10 || next_mark_ppos > STp->eod_frame_ppos) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Reverting to slow filemark space\n", dev); #endif return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count); } else { osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos); if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't get logical blk num in space_filemarks\n", dev); #endif return (-EIO); } if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { printk(KERN_WARNING "osst%d:W: Expected to find marker at ppos %d, not found\n", dev, next_mark_ppos); return (-EIO); } if (ntohl(STp->buffer->aux->filemark_cnt) != cnt + mt_count) { printk(KERN_WARNING "osst%d:W: Expected to find marker %d at ppos %d, not %d\n", dev, cnt+mt_count, next_mark_ppos, ntohl(STp->buffer->aux->filemark_cnt)); return (-EIO); } } } else { /* * Find nearest (usually previous) marker, then jump from marker to marker */ while (1) { if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER) break; if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: space_fwd: EOD reached\n", dev); #endif return (-EIO); } if (ntohl(STp->buffer->aux->filemark_cnt) == 0) { if (STp->first_mark_ppos == -1) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Reverting to slow filemark space\n", dev); #endif return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count); } osst_position_tape_and_confirm(STp, aSRpnt, STp->first_mark_ppos); if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't get logical blk num in space_filemarks_fwd_fast\n", dev); #endif return (-EIO); } if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { printk(KERN_WARNING "osst%d:W: Expected to find filemark at %d\n", dev, STp->first_mark_ppos); return (-EIO); } } else { if (osst_space_over_filemarks_backward(STp, aSRpnt, MTBSF, 1) < 0) return (-EIO); mt_count++; } } cnt++; while (cnt != mt_count) { next_mark_ppos = ntohl(STp->buffer->aux->next_mark_ppos); if (!next_mark_ppos || next_mark_ppos > STp->eod_frame_ppos) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Reverting to slow filemark space\n", dev); #endif return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count - cnt); } #if DEBUG else printk(OSST_DEB_MSG "osst%d:D: Positioning to next mark at %d\n", dev, next_mark_ppos); #endif osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos); cnt++; if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't get logical blk num in space_filemarks\n", dev); #endif return (-EIO); } if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { printk(KERN_WARNING "osst%d:W: Expected to find marker at ppos %d, not found\n", dev, next_mark_ppos); return (-EIO); } } } if (mt_op == MTFSF) { STp->frame_seq_number++; STp->frame_in_buffer = 0; STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); } return 0; } /* * In debug mode, we want to see as many errors as possible * to test the error recovery mechanism. */ #if DEBUG static void osst_set_retries(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int retries) { unsigned char cmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt = * aSRpnt; int dev = TAPE_NR(STp->devt); memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = MODE_SELECT; cmd[1] = 0x10; cmd[4] = NUMBER_RETRIES_PAGE_LENGTH + MODE_HEADER_LENGTH; (STp->buffer)->b_data[0] = cmd[4] - 1; (STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */ (STp->buffer)->b_data[2] = 0; /* Reserved */ (STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */ (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = NUMBER_RETRIES_PAGE | (1 << 7); (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 2; (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 4; (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = retries; if (debugging) printk(OSST_DEB_MSG "osst%d:D: Setting number of retries on OnStream tape to %d\n", dev, retries); SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], SCSI_DATA_WRITE, STp->timeout, 0, TRUE); *aSRpnt = SRpnt; if ((STp->buffer)->syscall_result) printk (KERN_ERR "osst%d:D: Couldn't set retries to %d\n", dev, retries); } #endif static int osst_write_filemark(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt) { int result; int this_mark_ppos = STp->first_frame_position; int this_mark_lbn = STp->logical_blk_num; #if DEBUG int dev = TAPE_NR(STp->devt); #endif if (STp->raw) return 0; STp->write_type = OS_WRITE_NEW_MARK; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Writing Filemark %i at fppos %d (fseq %d, lblk %d)\n", dev, STp->filemark_cnt, this_mark_ppos, STp->frame_seq_number, this_mark_lbn); #endif STp->dirty = 1; result = osst_flush_write_buffer(STp, aSRpnt); result |= osst_flush_drive_buffer(STp, aSRpnt); STp->last_mark_ppos = this_mark_ppos; STp->last_mark_lbn = this_mark_lbn; if (STp->header_cache != NULL && STp->filemark_cnt < OS_FM_TAB_MAX) STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt] = htonl(this_mark_ppos); if (STp->filemark_cnt++ == 0) STp->first_mark_ppos = this_mark_ppos; return result; } static int osst_write_eod(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt) { int result; #if DEBUG int dev = TAPE_NR(STp->devt); #endif if (STp->raw) return 0; STp->write_type = OS_WRITE_EOD; STp->eod_frame_ppos = STp->first_frame_position; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Writing EOD at fppos %d (fseq %d, lblk %d)\n", dev, STp->eod_frame_ppos, STp->frame_seq_number, STp->logical_blk_num); #endif STp->dirty = 1; result = osst_flush_write_buffer(STp, aSRpnt); result |= osst_flush_drive_buffer(STp, aSRpnt); STp->eod_frame_lfa = --(STp->frame_seq_number); return result; } static int osst_write_filler(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int where, int count) { int dev = TAPE_NR(STp->devt); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Reached onstream write filler group %d\n", dev, where); #endif osst_wait_ready(STp, aSRpnt, 60 * 5); osst_set_frame_position(STp, aSRpnt, where, 0); STp->write_type = OS_WRITE_FILLER; while (count--) { memcpy(STp->buffer->b_data, "Filler", 6); STp->buffer->buffer_bytes = 6; STp->dirty = 1; if (osst_flush_write_buffer(STp, aSRpnt)) { printk(KERN_INFO "osst%i:I: Couldn't write filler frame\n", dev); return (-EIO); } } #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Exiting onstream write filler group\n", dev); #endif return osst_flush_drive_buffer(STp, aSRpnt); } static int __osst_write_header(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int where, int count) { int dev = TAPE_NR(STp->devt); int result; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Reached onstream write header group %d\n", dev, where); #endif osst_wait_ready(STp, aSRpnt, 60 * 5); osst_set_frame_position(STp, aSRpnt, where, 0); STp->write_type = OS_WRITE_HEADER; while (count--) { osst_copy_to_buffer(STp->buffer, (unsigned char *)STp->header_cache); STp->buffer->buffer_bytes = sizeof(os_header_t); STp->dirty = 1; if (osst_flush_write_buffer(STp, aSRpnt)) { printk(KERN_INFO "osst%i:I: Couldn't write header frame\n", dev); return (-EIO); } } result = osst_flush_drive_buffer(STp, aSRpnt); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Write onstream header group %s\n", dev, result?"failed":"done"); #endif return result; } static int osst_write_header(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int locate_eod) { os_header_t * header; int result; int dev = TAPE_NR(STp->devt); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Writing tape header\n", dev); #endif if (STp->raw) return 0; if (STp->header_cache == NULL) { if ((STp->header_cache = (os_header_t *)vmalloc(sizeof(os_header_t))) == NULL) { printk(KERN_ERR "osst%i:E: Failed to allocate header cache\n", dev); return (-ENOMEM); } memset(STp->header_cache, 0, sizeof(os_header_t)); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Allocated and cleared memory for header cache\n", dev); #endif } if (STp->header_ok) STp->update_frame_cntr++; else STp->update_frame_cntr = 0; header = STp->header_cache; strcpy(header->ident_str, "ADR_SEQ"); header->major_rev = 1; header->minor_rev = 4; header->ext_trk_tb_off = htons(17192); header->pt_par_num = 1; header->partition[0].partition_num = OS_DATA_PARTITION; header->partition[0].par_desc_ver = OS_PARTITION_VERSION; header->partition[0].wrt_pass_cntr = htons(STp->wrt_pass_cntr); header->partition[0].first_frame_ppos = htonl(STp->first_data_ppos); header->partition[0].last_frame_ppos = htonl(STp->capacity); header->partition[0].eod_frame_ppos = htonl(STp->eod_frame_ppos); header->cfg_col_width = htonl(20); header->dat_col_width = htonl(1500); header->qfa_col_width = htonl(0); header->ext_track_tb.nr_stream_part = 1; header->ext_track_tb.et_ent_sz = 32; header->ext_track_tb.dat_ext_trk_ey.et_part_num = 0; header->ext_track_tb.dat_ext_trk_ey.fmt = 1; header->ext_track_tb.dat_ext_trk_ey.fm_tab_off = htons(17736); header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi = 0; header->ext_track_tb.dat_ext_trk_ey.last_hlb = htonl(STp->eod_frame_lfa); header->ext_track_tb.dat_ext_trk_ey.last_pp = htonl(STp->eod_frame_ppos); header->dat_fm_tab.fm_part_num = 0; header->dat_fm_tab.fm_tab_ent_sz = 4; header->dat_fm_tab.fm_tab_ent_cnt = htons(STp->filemark_cntfilemark_cnt:OS_FM_TAB_MAX); result = __osst_write_header(STp, aSRpnt, 0xbae, 5); if (STp->update_frame_cntr == 0) osst_write_filler(STp, aSRpnt, 0xbb3, 5); result &= __osst_write_header(STp, aSRpnt, 5, 5); if (locate_eod) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Locating back to eod frame addr %d\n", dev, STp->eod_frame_ppos); #endif osst_set_frame_position(STp, aSRpnt, STp->eod_frame_ppos, 0); } if (result) printk(KERN_ERR "osst%i:E: Write header failed\n", dev); else { memcpy(STp->application_sig, "LIN4", 4); STp->linux_media = 1; STp->linux_media_version = 4; STp->header_ok = 1; } return result; } static int osst_reset_header(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt) { if (STp->header_cache != NULL) memset(STp->header_cache, 0, sizeof(os_header_t)); STp->logical_blk_num = STp->frame_seq_number = 0; STp->frame_in_buffer = 0; STp->eod_frame_ppos = STp->first_data_ppos = 0x0000000A; STp->filemark_cnt = 0; STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1; return osst_write_header(STp, aSRpnt, 1); } static int __osst_analyze_headers(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int ppos) { int dev = TAPE_NR(STp->devt); os_header_t * header; os_aux_t * aux; char id_string[8]; int linux_media_version, update_frame_cntr; if (STp->raw) return 1; if (ppos == 5 || ppos == 0xbae || STp->buffer->syscall_result) { if (osst_set_frame_position(STp, aSRpnt, ppos, 0)) printk(KERN_WARNING "osst%i:W: Couldn't position tape\n", dev); if (osst_initiate_read (STp, aSRpnt)) { printk(KERN_WARNING "osst%i:W: Couldn't initiate read\n", dev); return 0; } } if (osst_read_frame(STp, aSRpnt, 180)) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't read header frame\n", dev); #endif return 0; } header = (os_header_t *) STp->buffer->b_data; /* warning: only first segment addressable */ aux = STp->buffer->aux; if (aux->frame_type != OS_FRAME_TYPE_HEADER) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping non-header frame (%d)\n", dev, ppos); #endif return 0; } if (ntohl(aux->frame_seq_num) != 0 || ntohl(aux->logical_blk_num) != 0 || aux->partition.partition_num != OS_CONFIG_PARTITION || ntohl(aux->partition.first_frame_ppos) != 0 || ntohl(aux->partition.last_frame_ppos) != 0xbb7 ) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Invalid header frame (%d,%d,%d,%d,%d)\n", dev, ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num), aux->partition.partition_num, ntohl(aux->partition.first_frame_ppos), ntohl(aux->partition.last_frame_ppos)); #endif return 0; } if (strncmp(header->ident_str, "ADR_SEQ", 7) != 0 && strncmp(header->ident_str, "ADR-SEQ", 7) != 0) { strncpy(id_string, header->ident_str, 7); id_string[7] = 0; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Invalid header identification string %s\n", dev, id_string); #endif return 0; } update_frame_cntr = ntohl(aux->update_frame_cntr); if (update_frame_cntr < STp->update_frame_cntr) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping frame %d with update_frame_counter %d<%d\n", dev, ppos, update_frame_cntr, STp->update_frame_cntr); #endif return 0; } if (header->major_rev != 1 || header->minor_rev != 4 ) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: %s revision %d.%d detected (1.4 supported)\n", dev, (header->major_rev != 1 || header->minor_rev < 2 || header->minor_rev > 4 )? "Invalid" : "Warning:", header->major_rev, header->minor_rev); #endif if (header->major_rev != 1 || header->minor_rev < 2 || header->minor_rev > 4) return 0; } #if DEBUG if (header->pt_par_num != 1) printk(KERN_INFO "osst%i:W: %d partitions defined, only one supported\n", dev, header->pt_par_num); #endif memcpy(id_string, aux->application_sig, 4); id_string[4] = 0; if (memcmp(id_string, "LIN", 3) == 0) { STp->linux_media = 1; linux_media_version = id_string[3] - '0'; if (linux_media_version != 4) printk(KERN_INFO "osst%i:I: Linux media version %d detected (current 4)\n", dev, linux_media_version); } else { printk(KERN_WARNING "osst%i:W: Non Linux media detected (%s)\n", dev, id_string); return 0; } if (linux_media_version < STp->linux_media_version) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping frame %d with linux_media_version %d\n", dev, ppos, linux_media_version); #endif return 0; } if (linux_media_version > STp->linux_media_version) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Frame %d sets linux_media_version to %d\n", dev, ppos, linux_media_version); #endif memcpy(STp->application_sig, id_string, 5); STp->linux_media_version = linux_media_version; STp->update_frame_cntr = -1; } if (update_frame_cntr > STp->update_frame_cntr) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Frame %d sets update_frame_counter to %d\n", dev, ppos, update_frame_cntr); #endif if (STp->header_cache == NULL) { if ((STp->header_cache = (os_header_t *)vmalloc(sizeof(os_header_t))) == NULL) { printk(KERN_ERR "osst%i:E: Failed to allocate header cache\n", dev); return 0; } #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Allocated memory for header cache\n", dev); #endif } osst_copy_from_buffer(STp->buffer, (unsigned char *)STp->header_cache); header = STp->header_cache; /* further accesses from cached (full) copy */ STp->wrt_pass_cntr = ntohs(header->partition[0].wrt_pass_cntr); STp->first_data_ppos = ntohl(header->partition[0].first_frame_ppos); STp->eod_frame_ppos = ntohl(header->partition[0].eod_frame_ppos); STp->eod_frame_lfa = ntohl(header->ext_track_tb.dat_ext_trk_ey.last_hlb); STp->filemark_cnt = ntohl(aux->filemark_cnt); STp->first_mark_ppos = ntohl(aux->next_mark_ppos); STp->last_mark_ppos = ntohl(aux->last_mark_ppos); STp->last_mark_lbn = ntohl(aux->last_mark_lbn); STp->update_frame_cntr = update_frame_cntr; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Detected write pass %d, update frame counter %d, filemark counter %d\n", dev, STp->wrt_pass_cntr, STp->update_frame_cntr, STp->filemark_cnt); printk(OSST_DEB_MSG "osst%d:D: first data frame on tape = %d, last = %d, eod frame = %d\n", dev, STp->first_data_ppos, ntohl(header->partition[0].last_frame_ppos), ntohl(header->partition[0].eod_frame_ppos)); printk(OSST_DEB_MSG "osst%d:D: first mark on tape = %d, last = %d, eod frame = %d\n", dev, STp->first_mark_ppos, STp->last_mark_ppos, STp->eod_frame_ppos); #endif if (header->minor_rev < 4 && STp->linux_media_version == 4) { #if DEBUG printk(OSST_DEB_MSG "osst%i:D: Moving filemark list to ADR 1.4 location\n", dev); #endif memcpy((void *)header->dat_fm_tab.fm_tab_ent, (void *)header->old_filemark_list, sizeof(header->dat_fm_tab.fm_tab_ent)); memset((void *)header->old_filemark_list, 0, sizeof(header->old_filemark_list)); } if (header->minor_rev == 4 && (header->ext_trk_tb_off != htons(17192) || header->partition[0].partition_num != OS_DATA_PARTITION || header->partition[0].par_desc_ver != OS_PARTITION_VERSION || header->partition[0].last_frame_ppos != htonl(STp->capacity) || header->cfg_col_width != htonl(20) || header->dat_col_width != htonl(1500) || header->qfa_col_width != htonl(0) || header->ext_track_tb.nr_stream_part != 1 || header->ext_track_tb.et_ent_sz != 32 || header->ext_track_tb.dat_ext_trk_ey.et_part_num != OS_DATA_PARTITION || header->ext_track_tb.dat_ext_trk_ey.fmt != 1 || header->ext_track_tb.dat_ext_trk_ey.fm_tab_off != htons(17736) || header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi != 0 || header->ext_track_tb.dat_ext_trk_ey.last_pp != htonl(STp->eod_frame_ppos) || header->dat_fm_tab.fm_part_num != OS_DATA_PARTITION || header->dat_fm_tab.fm_tab_ent_sz != 4 || header->dat_fm_tab.fm_tab_ent_cnt != htons(STp->filemark_cntfilemark_cnt:OS_FM_TAB_MAX))) printk(KERN_WARNING "osst%i:W: Failed consistency check ADR 1.4 format\n", dev); } return 1; } static int osst_analyze_headers(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt) { int position, ppos; int first, last; int valid = 0; int dev = TAPE_NR(STp->devt); position = osst_get_frame_position(STp, aSRpnt); if (STp->raw) { STp->header_ok = STp->linux_media = 1; STp->linux_media_version = 0; return 1; } STp->header_ok = STp->linux_media = STp->linux_media_version = 0; STp->wrt_pass_cntr = STp->update_frame_cntr = -1; STp->eod_frame_ppos = STp->first_data_ppos = -1; STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Reading header\n", dev); #endif /* optimization for speed - if we are positioned at ppos 10, read second group first */ /* TODO try the ADR 1.1 locations for the second group if we have no valid one yet... */ first = position==10?0xbae: 5; last = position==10?0xbb3:10; for (ppos = first; ppos < last; ppos++) if (__osst_analyze_headers(STp, aSRpnt, ppos)) valid = 1; first = position==10? 5:0xbae; last = position==10?10:0xbb3; for (ppos = first; ppos < last; ppos++) if (__osst_analyze_headers(STp, aSRpnt, ppos)) valid = 1; if (!valid) { printk(KERN_ERR "osst%i:E: Failed to find valid ADRL header, new media?\n", dev); STp->eod_frame_ppos = STp->first_data_ppos = 0; osst_set_frame_position(STp, aSRpnt, 10, 0); return 0; } if (position <= STp->first_data_ppos) { position = STp->first_data_ppos; STp->ps[0].drv_file = STp->ps[0].drv_block = STp->frame_seq_number = STp->logical_blk_num = 0; } osst_set_frame_position(STp, aSRpnt, position, 0); STp->header_ok = 1; return 1; } static int osst_verify_position(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt) { int frame_position = STp->first_frame_position; int frame_seq_numbr = STp->frame_seq_number; int logical_blk_num = STp->logical_blk_num; int halfway_frame = STp->frame_in_buffer; int read_pointer = STp->buffer->read_pointer; int prev_mark_ppos = -1; int actual_mark_ppos, i, n; #if DEBUG int dev = TAPE_NR(STp->devt); printk(OSST_DEB_MSG "osst%d:D: Verify that the tape is really the one we think before writing\n", dev); #endif osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0); if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't get logical blk num in verify_position\n", dev); #endif return (-EIO); } if (STp->linux_media_version >= 4) { for (i=0; ifilemark_cnt; i++) if ((n=ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i])) < frame_position) prev_mark_ppos = n; } else prev_mark_ppos = frame_position - 1; /* usually - we don't really know */ actual_mark_ppos = STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER ? frame_position - 1 : ntohl(STp->buffer->aux->last_mark_ppos); if (frame_position != STp->first_frame_position || frame_seq_numbr != STp->frame_seq_number + (halfway_frame?0:1) || prev_mark_ppos != actual_mark_ppos ) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Block mismatch: fppos %d-%d, fseq %d-%d, mark %d-%d\n", dev, STp->first_frame_position, frame_position, STp->frame_seq_number + (halfway_frame?0:1), frame_seq_numbr, actual_mark_ppos, prev_mark_ppos); #endif return (-EIO); } if (halfway_frame) { /* prepare buffer for append and rewrite on top of original */ osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0); STp->buffer->buffer_bytes = read_pointer; STp->ps[STp->partition].rw = ST_WRITING; STp->dirty = 1; } STp->frame_in_buffer = halfway_frame; STp->frame_seq_number = frame_seq_numbr; STp->logical_blk_num = logical_blk_num; return 0; } /* Acc. to OnStream, the vers. numbering is the following: * X.XX for released versions (X=digit), * XXXY for unreleased versions (Y=letter) * Ordering 1.05 < 106A < 106B < ... < 106a < ... < 1.06 * This fn makes monoton numbers out of this scheme ... */ static unsigned int osst_parse_firmware_rev (const char * str) { if (str[1] == '.') { return (str[0]-'0')*10000 +(str[2]-'0')*1000 +(str[3]-'0')*100; } else { return (str[0]-'0')*10000 +(str[1]-'0')*1000 +(str[2]-'0')*100 - 100 +(str[3]-'@'); } } /* * Configure the OnStream SCII tape drive for default operation */ static int osst_configure_onstream(OS_Scsi_Tape *STp, Scsi_Request ** aSRpnt) { unsigned char cmd[MAX_COMMAND_SIZE]; int dev = TAPE_NR(STp->devt); Scsi_Request * SRpnt = * aSRpnt; osst_mode_parameter_header_t * header; osst_block_size_page_t * bs; osst_capabilities_page_t * cp; osst_tape_paramtr_page_t * prm; int drive_buffer_size; if (STp->ready != ST_READY) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Not Ready\n", dev); #endif return (-EIO); } if (STp->os_fw_rev < 10600) { printk(KERN_INFO "osst%i:I: Old OnStream firmware revision detected (%s),\n", dev, STp->device->rev); printk(KERN_INFO "osst%d:I: an upgrade to version 1.06 or above is recommended\n", dev); } /* * Configure 32.5KB (data+aux) frame size. * Get the current frame size from the block size mode page */ memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = MODE_SENSE; cmd[1] = 8; cmd[2] = BLOCK_SIZE_PAGE; cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH; SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], SCSI_DATA_READ, STp->timeout, 0, TRUE); if (SRpnt == NULL) { #if DEBUG printk(OSST_DEB_MSG "osst :D: Busy\n"); #endif return (-EBUSY); } *aSRpnt = SRpnt; if ((STp->buffer)->syscall_result != 0) { printk (KERN_ERR "osst%i:E: Can't get tape block size mode page\n", dev); return (-EIO); } header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; bs = (osst_block_size_page_t *) ((STp->buffer)->b_data + sizeof(osst_mode_parameter_header_t) + header->bdl); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: 32KB play back: %s\n", dev, bs->play32 ? "Yes" : "No"); printk(OSST_DEB_MSG "osst%d:D: 32.5KB play back: %s\n", dev, bs->play32_5 ? "Yes" : "No"); printk(OSST_DEB_MSG "osst%d:D: 32KB record: %s\n", dev, bs->record32 ? "Yes" : "No"); printk(OSST_DEB_MSG "osst%d:D: 32.5KB record: %s\n", dev, bs->record32_5 ? "Yes" : "No"); #endif /* * Configure default auto columns mode, 32.5KB transfer mode */ bs->one = 1; bs->play32 = 0; bs->play32_5 = 1; bs->record32 = 0; bs->record32_5 = 1; memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = MODE_SELECT; cmd[1] = 0x10; cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH; SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], SCSI_DATA_WRITE, STp->timeout, 0, TRUE); *aSRpnt = SRpnt; if ((STp->buffer)->syscall_result != 0) { printk (KERN_ERR "osst%i:E: Couldn't set tape block size mode page\n", dev); return (-EIO); } #if DEBUG printk(KERN_INFO "osst%d:D: Drive Block Size changed to 32.5K\n", dev); /* * In debug mode, we want to see as many errors as possible * to test the error recovery mechanism. */ osst_set_retries(STp, aSRpnt, 0); SRpnt = * aSRpnt; #endif /* * Set vendor name to 'LIN4' for "Linux support version 4". */ memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = MODE_SELECT; cmd[1] = 0x10; cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH; header->mode_data_length = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH - 1; header->medium_type = 0; /* Medium Type - ignoring */ header->dsp = 0; /* Reserved */ header->bdl = 0; /* Block Descriptor Length */ (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = VENDOR_IDENT_PAGE | (1 << 7); (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 6; (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 'L'; (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 'I'; (STp->buffer)->b_data[MODE_HEADER_LENGTH + 4] = 'N'; (STp->buffer)->b_data[MODE_HEADER_LENGTH + 5] = '4'; (STp->buffer)->b_data[MODE_HEADER_LENGTH + 6] = 0; (STp->buffer)->b_data[MODE_HEADER_LENGTH + 7] = 0; SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], SCSI_DATA_WRITE, STp->timeout, 0, TRUE); *aSRpnt = SRpnt; if ((STp->buffer)->syscall_result != 0) { printk (KERN_ERR "osst%i:E: Couldn't set vendor name to %s\n", dev, (char *) ((STp->buffer)->b_data + MODE_HEADER_LENGTH + 2)); return (-EIO); } memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = MODE_SENSE; cmd[1] = 8; cmd[2] = CAPABILITIES_PAGE; cmd[4] = CAPABILITIES_PAGE_LENGTH + MODE_HEADER_LENGTH; SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], SCSI_DATA_READ, STp->timeout, 0, TRUE); *aSRpnt = SRpnt; if ((STp->buffer)->syscall_result != 0) { printk (KERN_ERR "osst%i:E: Can't get capabilities page\n", dev); return (-EIO); } header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; cp = (osst_capabilities_page_t *) ((STp->buffer)->b_data + sizeof(osst_mode_parameter_header_t) + header->bdl); drive_buffer_size = ntohs(cp->buffer_size) / 2; memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = MODE_SENSE; cmd[1] = 8; cmd[2] = TAPE_PARAMTR_PAGE; cmd[4] = TAPE_PARAMTR_PAGE_LENGTH + MODE_HEADER_LENGTH; SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], SCSI_DATA_READ, STp->timeout, 0, TRUE); *aSRpnt = SRpnt; if ((STp->buffer)->syscall_result != 0) { printk (KERN_ERR "osst%i:E: Can't get tape parameter page\n", dev); return (-EIO); } header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; prm = (osst_tape_paramtr_page_t *) ((STp->buffer)->b_data + sizeof(osst_mode_parameter_header_t) + header->bdl); STp->density = prm->density; STp->capacity = ntohs(prm->segtrk) * ntohs(prm->trks); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Density %d, tape length: %dMB, drive buffer size: %dKB\n", dev, STp->density, STp->capacity / 32, drive_buffer_size); #endif return 0; } /* Step over EOF if it has been inadvertently crossed (ioctl not used because it messes up the block number). */ static int cross_eof(OS_Scsi_Tape *STp, Scsi_Request ** aSRpnt, int forward) { int result; int dev = TAPE_NR(STp->devt); #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Stepping over filemark %s.\n", dev, forward ? "forward" : "backward"); #endif if (forward) { /* assumes that the filemark is already read by the drive, so this is low cost */ result = osst_space_over_filemarks_forward_slow(STp, aSRpnt, MTFSF, 1); } else /* assumes this is only called if we just read the filemark! */ result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - 1); if (result < 0) printk(KERN_WARNING "osst%d:W: Stepping over filemark %s failed.\n", dev, forward ? "forward" : "backward"); return result; } /* Get the tape position. */ static int osst_get_frame_position(OS_Scsi_Tape *STp, Scsi_Request ** aSRpnt) { unsigned char scmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt; int result = 0; /* KG: We want to be able to use it for checking Write Buffer availability * and thus don't want to risk to overwrite anything. Exchange buffers ... */ char mybuf[24]; char * olddata = STp->buffer->b_data; int oldsize = STp->buffer->buffer_size; int dev = TAPE_NR(STp->devt); if (STp->ready != ST_READY) return (-EIO); memset (scmd, 0, MAX_COMMAND_SIZE); scmd[0] = READ_POSITION; STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24; SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 20, SCSI_DATA_READ, STp->timeout, MAX_READY_RETRIES, TRUE); if (!SRpnt) { STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize; return (-EBUSY); } *aSRpnt = SRpnt; if (STp->buffer->syscall_result) result = ((SRpnt->sr_sense_buffer[2] & 0x0f) == 3) ? -EIO : -EINVAL; if (result == -EINVAL) printk(KERN_ERR "osst%d:E: Can't read tape position.\n", dev); else { if (result == -EIO) { /* re-read position */ unsigned char mysense[16]; memcpy (mysense, SRpnt->sr_sense_buffer, 16); memset (scmd, 0, MAX_COMMAND_SIZE); scmd[0] = READ_POSITION; STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24; SRpnt = osst_do_scsi(SRpnt, STp, scmd, 20, SCSI_DATA_READ, STp->timeout, MAX_READY_RETRIES, TRUE); if (!STp->buffer->syscall_result) memcpy (SRpnt->sr_sense_buffer, mysense, 16); } STp->first_frame_position = ((STp->buffer)->b_data[4] << 24) + ((STp->buffer)->b_data[5] << 16) + ((STp->buffer)->b_data[6] << 8) + (STp->buffer)->b_data[7]; STp->last_frame_position = ((STp->buffer)->b_data[ 8] << 24) + ((STp->buffer)->b_data[ 9] << 16) + ((STp->buffer)->b_data[10] << 8) + (STp->buffer)->b_data[11]; STp->cur_frames = (STp->buffer)->b_data[15]; #if DEBUG if (debugging) { printk(OSST_DEB_MSG "osst%d:D: Drive Positions: host %d, tape %d%s, buffer %d\n", dev, STp->first_frame_position, STp->last_frame_position, ((STp->buffer)->b_data[0]&0x80)?" (BOP)": ((STp->buffer)->b_data[0]&0x40)?" (EOP)":"", STp->cur_frames); } #endif if (STp->cur_frames == 0 && STp->first_frame_position != STp->last_frame_position) { #if DEBUG printk(KERN_WARNING "osst%d:D: Correcting read position %d, %d, %d\n", dev, STp->first_frame_position, STp->last_frame_position, STp->cur_frames); #endif STp->first_frame_position = STp->last_frame_position; } } STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize; return (result == 0 ? STp->first_frame_position : result); } /* Set the tape block */ static int osst_set_frame_position(OS_Scsi_Tape *STp, Scsi_Request ** aSRpnt, int ppos, int skip) { unsigned char scmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt; ST_partstat * STps; int result = 0; int pp = (ppos == 3000 && !skip)? 0 : ppos; int dev = TAPE_NR(STp->devt); if (STp->ready != ST_READY) return (-EIO); STps = &(STp->ps[STp->partition]); if (ppos < 0 || ppos > STp->capacity) { printk(KERN_WARNING "osst%d:W: Reposition request %d out of range\n", dev, ppos); pp = ppos = ppos < 0 ? 0 : (STp->capacity - 1); result = (-EINVAL); } do { #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Setting ppos to %d.\n", dev, pp); #endif memset (scmd, 0, MAX_COMMAND_SIZE); scmd[0] = SEEK_10; scmd[1] = 1; scmd[3] = (pp >> 24); scmd[4] = (pp >> 16); scmd[5] = (pp >> 8); scmd[6] = pp; if (skip) scmd[9] = 0x80; SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 0, SCSI_DATA_NONE, STp->long_timeout, MAX_READY_RETRIES, TRUE); if (!SRpnt) return (-EBUSY); *aSRpnt = SRpnt; if ((STp->buffer)->syscall_result != 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: SEEK command from %d to %d failed.\n", dev, STp->first_frame_position, pp); #endif result = (-EIO); } if (pp != ppos) osst_wait_ready(STp, aSRpnt, 5 * 60); } while ((pp != ppos) && (pp = ppos)); STp->first_frame_position = STp->last_frame_position = ppos; STps->eof = ST_NOEOF; STps->at_sm = 0; STps->rw = ST_IDLE; STp->frame_in_buffer = 0; return result; } /* osst versions of st functions - augmented and stripped to suit OnStream only */ /* Flush the write buffer (never need to write if variable blocksize). */ static int osst_flush_write_buffer(OS_Scsi_Tape *STp, Scsi_Request ** aSRpnt) { int offset, transfer, blks = 0; int result = 0; unsigned char cmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt = *aSRpnt; ST_partstat * STps; int dev = TAPE_NR(STp->devt); if ((STp->buffer)->writing) { if (SRpnt == (STp->buffer)->last_SRpnt) #if DEBUG { printk(OSST_DEB_MSG "osst%d:D: aSRpnt points to Scsi_Request that write_behind_check will release -- cleared\n", dev); #endif *aSRpnt = SRpnt = NULL; #if DEBUG } else if (SRpnt) printk(OSST_DEB_MSG "osst%d:D: aSRpnt does not point to Scsi_Request that write_behind_check will release -- strange\n", dev); #endif osst_write_behind_check(STp); if ((STp->buffer)->syscall_result) { #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Async write error (flush) %x.\n", dev, (STp->buffer)->midlevel_result); #endif if ((STp->buffer)->midlevel_result == INT_MAX) return (-ENOSPC); return (-EIO); } } result = 0; if (STp->dirty == 1) { STp->write_count++; STps = &(STp->ps[STp->partition]); STps->rw = ST_WRITING; offset = STp->buffer->buffer_bytes; blks = (offset + STp->block_size - 1) / STp->block_size; transfer = OS_FRAME_SIZE; if (offset < OS_DATA_SIZE) osst_zero_buffer_tail(STp->buffer); /* TODO: Error handling! */ if (STp->poll) result = osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -50, 120); memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = WRITE_6; cmd[1] = 1; cmd[4] = 1; switch (STp->write_type) { case OS_WRITE_DATA: #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Writing %d blocks to frame %d, lblks %d-%d\n", dev, blks, STp->frame_seq_number, STp->logical_blk_num - blks, STp->logical_blk_num - 1); #endif osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++, STp->logical_blk_num - blks, STp->block_size, blks); break; case OS_WRITE_EOD: osst_init_aux(STp, OS_FRAME_TYPE_EOD, STp->frame_seq_number++, STp->logical_blk_num, 0, 0); break; case OS_WRITE_NEW_MARK: osst_init_aux(STp, OS_FRAME_TYPE_MARKER, STp->frame_seq_number++, STp->logical_blk_num++, 0, blks=1); break; case OS_WRITE_HEADER: osst_init_aux(STp, OS_FRAME_TYPE_HEADER, 0, 0, 0, blks=0); break; default: /* probably FILLER */ osst_init_aux(STp, OS_FRAME_TYPE_FILL, 0, 0, 0, 0); } #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Flushing %d bytes, Transfering %d bytes in %d lblocks.\n", dev, offset, transfer, blks); #endif SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, transfer, SCSI_DATA_WRITE, STp->timeout, MAX_WRITE_RETRIES, TRUE); *aSRpnt = SRpnt; if (!SRpnt) return (-EBUSY); if ((STp->buffer)->syscall_result != 0) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: write sense [0]=0x%02x [2]=%02x [12]=%02x [13]=%02x\n", dev, SRpnt->sr_sense_buffer[0], SRpnt->sr_sense_buffer[2], SRpnt->sr_sense_buffer[12], SRpnt->sr_sense_buffer[13]); #endif if ((SRpnt->sr_sense_buffer[0] & 0x70) == 0x70 && (SRpnt->sr_sense_buffer[2] & 0x40) && /* FIXME - SC-30 drive doesn't assert EOM bit */ (SRpnt->sr_sense_buffer[2] & 0x0f) == NO_SENSE) { STp->dirty = 0; (STp->buffer)->buffer_bytes = 0; result = (-ENOSPC); } else { if (osst_write_error_recovery(STp, aSRpnt, 1)) { printk(KERN_ERR "osst%d:E: Error on flush write.\n", dev); result = (-EIO); } } STps->drv_block = (-1); } else { STp->first_frame_position++; STp->dirty = 0; (STp->buffer)->buffer_bytes = 0; } } #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Exit flush write buffer with code %d\n", dev, result); #endif return result; } /* Flush the tape buffer. The tape will be positioned correctly unless seek_next is true. */ static int osst_flush_buffer(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int seek_next) { ST_partstat * STps; int backspace = 0, result = 0; #if DEBUG int dev = TAPE_NR(STp->devt); #endif /* * If there was a bus reset, block further access * to this device. */ if( STp->device->was_reset ) return (-EIO); if (STp->ready != ST_READY) return 0; STps = &(STp->ps[STp->partition]); if (STps->rw == ST_WRITING) /* Writing */ return osst_flush_write_buffer(STp, aSRpnt); if (STp->block_size == 0) return 0; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Reached flush (read) buffer\n", dev); #endif if (!STp->can_bsr) { backspace = ((STp->buffer)->buffer_bytes + (STp->buffer)->read_pointer) / STp->block_size - ((STp->buffer)->read_pointer + STp->block_size - 1 ) / STp->block_size ; (STp->buffer)->buffer_bytes = 0; (STp->buffer)->read_pointer = 0; STp->frame_in_buffer = 0; /* FIXME is this relevant w. OSST? */ } if (!seek_next) { if (STps->eof == ST_FM_HIT) { result = cross_eof(STp, aSRpnt, FALSE); /* Back over the EOF hit */ if (!result) STps->eof = ST_NOEOF; else { if (STps->drv_file >= 0) STps->drv_file++; STps->drv_block = 0; } } if (!result && backspace > 0) /* TODO -- design and run a test case for this */ result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - backspace); } else if (STps->eof == ST_FM_HIT) { if (STps->drv_file >= 0) STps->drv_file++; STps->drv_block = 0; STps->eof = ST_NOEOF; } return result; } static int osst_write_frame(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, int synchronous) { unsigned char cmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt; int blks; #if DEBUG int dev = TAPE_NR(STp->devt); #endif if ((!STp-> raw) && (STp->first_frame_position == 0xbae)) { /* _must_ preserve buffer! */ #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Reaching config partition.\n", dev); #endif if (osst_flush_drive_buffer(STp, aSRpnt) < 0) { return (-EIO); } /* error recovery may have bumped us past the header partition */ if (osst_get_frame_position(STp, aSRpnt) < 0xbb8) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Skipping over config partition.\n", dev); #endif osst_position_tape_and_confirm(STp, aSRpnt, 0xbb8); } } if (STp->poll) osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -50, 60); /* TODO: Check for an error ! */ // osst_build_stats(STp, &SRpnt); STp->ps[STp->partition].rw = ST_WRITING; STp->write_type = OS_WRITE_DATA; memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = WRITE_6; cmd[1] = 1; cmd[4] = 1; /* one frame at a time... */ blks = STp->buffer->buffer_bytes / STp->block_size; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Writing %d blocks to frame %d, lblks %d-%d\n", dev, blks, STp->frame_seq_number, STp->logical_blk_num - blks, STp->logical_blk_num - 1); #endif osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++, STp->logical_blk_num - blks, STp->block_size, blks); #if DEBUG if (!synchronous) STp->write_pending = 1; #endif SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, SCSI_DATA_WRITE, STp->timeout, MAX_WRITE_RETRIES, synchronous); if (!SRpnt) return (-EBUSY); *aSRpnt = SRpnt; if (synchronous) { if (STp->buffer->syscall_result != 0) { #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Error on write:\n", dev); #endif if ((SRpnt->sr_sense_buffer[0] & 0x70) == 0x70 && (SRpnt->sr_sense_buffer[2] & 0x40)) { if ((SRpnt->sr_sense_buffer[2] & 0x0f) == VOLUME_OVERFLOW) return (-ENOSPC); } else { if (osst_write_error_recovery(STp, aSRpnt, 1)) return (-EIO); } } else STp->first_frame_position++; } STp->write_count++; return 0; } /* Entry points to osst */ /* Write command */ static ssize_t osst_write(struct file * filp, const char * buf, size_t count, loff_t *ppos) { struct inode *inode = filp->f_dentry->d_inode; ssize_t total, retval = 0; ssize_t i, do_count, blks, transfer; int write_threshold; int doing_write = 0; const char *b_point; Scsi_Request * SRpnt = NULL; OS_Scsi_Tape * STp; ST_mode * STm; ST_partstat * STps; int dev = TAPE_NR(inode->i_rdev); STp = os_scsi_tapes[dev]; if (down_interruptible(&STp->lock)) return (-ERESTARTSYS); /* * If we are in the middle of error recovery, don't let anyone * else try and use this device. Also, if error recovery fails, it * may try and take the device offline, in which case all further * access to the device is prohibited. */ if( !scsi_block_when_processing_errors(STp->device) ) { retval = (-ENXIO); goto out; } if (ppos != &filp->f_pos) { /* "A request was outside the capabilities of the device." */ retval = (-ENXIO); goto out; } if (STp->ready != ST_READY) { if (STp->ready == ST_NO_TAPE) retval = (-ENOMEDIUM); else retval = (-EIO); goto out; } STm = &(STp->modes[STp->current_mode]); if (!STm->defined) { retval = (-ENXIO); goto out; } if (count == 0) goto out; /* * If there was a bus reset, block further access * to this device. */ if (STp->device->was_reset) { retval = (-EIO); goto out; } #if DEBUG if (!STp->in_use) { printk(OSST_DEB_MSG "osst%d:D: Incorrect device.\n", dev); retval = (-EIO); goto out; } #endif if (STp->write_prot) { retval = (-EACCES); goto out; } /* Write must be integral number of blocks */ if (STp->block_size != 0 && (count % STp->block_size) != 0) { printk(KERN_ERR "osst%d:E: Write (%ld bytes) not multiple of tape block size (%d%c).\n", dev, (unsigned long)count, STp->block_size<1024? STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k'); retval = (-EINVAL); goto out; } if (STp->first_frame_position >= STp->capacity - OSST_EOM_RESERVE) { printk(KERN_ERR "osst%d:E: Write truncated at EOM early warning (frame %d).\n", dev, STp->first_frame_position); retval = (-ENOSPC); goto out; } STps = &(STp->ps[STp->partition]); if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !osst_int_ioctl(STp, &SRpnt, MTLOCK, 0)) STp->door_locked = ST_LOCKED_AUTO; if (STps->rw == ST_READING) { retval = osst_flush_buffer(STp, &SRpnt, 0); if (retval) goto out; STps->rw = ST_IDLE; } else if (STps->rw != ST_WRITING) { /* Are we totally rewriting this tape? */ if (!STp->header_ok || (STp->first_frame_position == STp->first_data_ppos && STps->drv_block < 0) || (STps->drv_file == 0 && STps->drv_block == 0)) { STp->wrt_pass_cntr++; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Allocating next write pass counter: %d\n", dev, STp->wrt_pass_cntr); #endif osst_reset_header(STp, &SRpnt); STps->drv_file = STps->drv_block = 0; } /* Do we know where we'll be writing on the tape? */ else { if ((STp->fast_open && osst_verify_position(STp, &SRpnt)) || STps->drv_file < 0 || STps->drv_block < 0) { if (STp->first_frame_position == STp->eod_frame_ppos) { /* at EOD */ STps->drv_file = STp->filemark_cnt; STps->drv_block = 0; } else { /* We have no idea where the tape is positioned - give up */ #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Cannot write at indeterminate position.\n", dev); #endif retval = (-EIO); goto out; } } if ((STps->drv_file + STps->drv_block) > 0 && STps->drv_file < STp->filemark_cnt) { STp->filemark_cnt = STps->drv_file; STp->last_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt-1]); printk(KERN_WARNING "osst%d:W: Overwriting file %d with old write pass counter %d\n", dev, STps->drv_file, STp->wrt_pass_cntr); printk(KERN_WARNING "osst%d:W: may lead to stale data being accepted on reading back!\n", dev); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: resetting filemark count to %d and last mark ppos,lbn to %d,%d\n", dev, STp->filemark_cnt, STp->last_mark_ppos, STp->last_mark_lbn); #endif } } STp->fast_open = FALSE; } if (!STp->header_ok) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Write cannot proceed without valid headers\n", dev); #endif retval = (-EIO); goto out; } if ((STp->buffer)->writing) { if (SRpnt) printk(KERN_ERR "osst%d:A: Not supposed to have SRpnt at line %d\n", dev, __LINE__); osst_write_behind_check(STp); if ((STp->buffer)->syscall_result) { #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Async write error (write) %x.\n", dev, (STp->buffer)->midlevel_result); #endif if ((STp->buffer)->midlevel_result == INT_MAX) STps->eof = ST_EOM_OK; else STps->eof = ST_EOM_ERROR; } } if (STps->eof == ST_EOM_OK) { retval = (-ENOSPC); goto out; } else if (STps->eof == ST_EOM_ERROR) { retval = (-EIO); goto out; } /* Check the buffer readability in cases where copy_user might catch the problems after some tape movement. */ if ((copy_from_user(&i, buf, 1) != 0 || copy_from_user(&i, buf + count - 1, 1) != 0)) { retval = (-EFAULT); goto out; } if (!STm->do_buffer_writes) { write_threshold = 1; } else write_threshold = (STp->buffer)->buffer_blocks * STp->block_size; if (!STm->do_async_writes) write_threshold--; total = count; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Writing %d bytes to file %d block %d lblk %d fseq %d fppos %d\n", dev, count, STps->drv_file, STps->drv_block, STp->logical_blk_num, STp->frame_seq_number, STp->first_frame_position); #endif b_point = buf; while ((STp->buffer)->buffer_bytes + count > write_threshold) { doing_write = 1; do_count = (STp->buffer)->buffer_blocks * STp->block_size - (STp->buffer)->buffer_bytes; if (do_count > count) do_count = count; i = append_to_buffer(b_point, STp->buffer, do_count); if (i) { retval = i; goto out; } blks = do_count / STp->block_size; STp->logical_blk_num += blks; /* logical_blk_num is incremented as data is moved from user */ i = osst_write_frame(STp, &SRpnt, TRUE); if (i == (-ENOSPC)) { transfer = STp->buffer->writing; /* FIXME -- check this logic */ if (transfer <= do_count) { filp->f_pos += do_count - transfer; count -= do_count - transfer; if (STps->drv_block >= 0) { STps->drv_block += (do_count - transfer) / STp->block_size; } STps->eof = ST_EOM_OK; retval = (-ENOSPC); /* EOM within current request */ #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: EOM with %d bytes unwritten.\n", dev, transfer); #endif } else { STps->eof = ST_EOM_ERROR; STps->drv_block = (-1); /* Too cautious? */ retval = (-EIO); /* EOM for old data */ #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: EOM with lost data.\n", dev); #endif } } else retval = i; if (retval < 0) { if (SRpnt != NULL) { scsi_release_request(SRpnt); SRpnt = NULL; } STp->buffer->buffer_bytes = 0; STp->dirty = 0; if (count < total) retval = total - count; goto out; } filp->f_pos += do_count; b_point += do_count; count -= do_count; if (STps->drv_block >= 0) { STps->drv_block += blks; } STp->buffer->buffer_bytes = 0; STp->dirty = 0; } /* end while write threshold exceeded */ if (count != 0) { STp->dirty = 1; i = append_to_buffer(b_point, STp->buffer, count); if (i) { retval = i; goto out; } blks = count / STp->block_size; STp->logical_blk_num += blks; if (STps->drv_block >= 0) { STps->drv_block += blks; } filp->f_pos += count; count = 0; } if (doing_write && (STp->buffer)->syscall_result != 0) { retval = (STp->buffer)->syscall_result; goto out; } if (STm->do_async_writes && ((STp->buffer)->buffer_bytes >= STp->write_threshold)) { /* Schedule an asynchronous write */ (STp->buffer)->writing = ((STp->buffer)->buffer_bytes / STp->block_size) * STp->block_size; STp->dirty = !((STp->buffer)->writing == (STp->buffer)->buffer_bytes); i = osst_write_frame(STp, &SRpnt, FALSE); if (i < 0) { retval = (-EIO); goto out; } SRpnt = NULL; /* Prevent releasing this request! */ } STps->at_sm &= (total == 0); if (total > 0) STps->eof = ST_NOEOF; retval = total; out: if (SRpnt != NULL) scsi_release_request(SRpnt); up(&STp->lock); return retval; } /* Read command */ static ssize_t osst_read(struct file * filp, char * buf, size_t count, loff_t *ppos) { struct inode * inode = filp->f_dentry->d_inode; ssize_t total, retval = 0; ssize_t i, transfer; int special; OS_Scsi_Tape * STp; ST_mode * STm; ST_partstat * STps; Scsi_Request *SRpnt = NULL; int dev = TAPE_NR(inode->i_rdev); STp = os_scsi_tapes[dev]; if (down_interruptible(&STp->lock)) return (-ERESTARTSYS); /* * If we are in the middle of error recovery, don't let anyone * else try and use this device. Also, if error recovery fails, it * may try and take the device offline, in which case all further * access to the device is prohibited. */ if( !scsi_block_when_processing_errors(STp->device) ) { retval = (-ENXIO); goto out; } if (ppos != &filp->f_pos) { /* "A request was outside the capabilities of the device." */ retval = (-ENXIO); goto out; } if (STp->ready != ST_READY) { if (STp->ready == ST_NO_TAPE) retval = (-ENOMEDIUM); else retval = (-EIO); goto out; } STm = &(STp->modes[STp->current_mode]); if (!STm->defined) { retval = (-ENXIO); goto out; } #if DEBUG if (!STp->in_use) { printk(OSST_DEB_MSG "osst%d:D: Incorrect device.\n", dev); retval = (-EIO); goto out; } #endif /* Must have initialized medium */ if (!STp->header_ok) { retval = (-EIO); goto out; } if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !osst_int_ioctl(STp, &SRpnt, MTLOCK, 0)) STp->door_locked = ST_LOCKED_AUTO; STps = &(STp->ps[STp->partition]); if (STps->rw == ST_WRITING) { retval = osst_flush_buffer(STp, &SRpnt, 0); if (retval) goto out; STps->rw = ST_IDLE; /* FIXME -- this may leave the tape without EOD and up2date headers */ } if ((count % STp->block_size) != 0) { printk(KERN_WARNING "osst%d:W: Read (%Zd bytes) not multiple of tape block size (%d%c).\n", dev, count, STp->block_size<1024?STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k'); } #if DEBUG if (debugging && STps->eof != ST_NOEOF) printk(OSST_DEB_MSG "osst%d:D: EOF/EOM flag up (%d). Bytes %d\n", dev, STps->eof, (STp->buffer)->buffer_bytes); #endif if ((STp->buffer)->buffer_bytes == 0 && STps->eof >= ST_EOD_1) { if (STps->eof < ST_EOD) { STps->eof += 1; retval = 0; goto out; } retval = (-EIO); /* EOM or Blank Check */ goto out; } /* Check the buffer writability before any tape movement. Don't alter buffer data. */ if (copy_from_user(&i, buf, 1) != 0 || copy_to_user (buf, &i, 1) != 0 || copy_from_user(&i, buf + count - 1, 1) != 0 || copy_to_user (buf + count - 1, &i, 1) != 0) { retval = (-EFAULT); goto out; } /* Loop until enough data in buffer or a special condition found */ for (total = 0, special = 0; total < count - STp->block_size + 1 && !special; ) { /* Get new data if the buffer is empty */ if ((STp->buffer)->buffer_bytes == 0) { if (STps->eof == ST_FM_HIT) break; special = osst_get_logical_frame(STp, &SRpnt, STp->frame_seq_number, 0); if (special < 0) { /* No need to continue read */ STp->frame_in_buffer = 0; retval = special; goto out; } } /* Move the data from driver buffer to user buffer */ if ((STp->buffer)->buffer_bytes > 0) { #if DEBUG if (debugging && STps->eof != ST_NOEOF) printk(OSST_DEB_MSG "osst%d:D: EOF up (%d). Left %d, needed %d.\n", dev, STps->eof, (STp->buffer)->buffer_bytes, count - total); #endif transfer = (((STp->buffer)->buffer_bytes < count - total ? (STp->buffer)->buffer_bytes : count - total)/ STp->block_size) * STp->block_size; /* force multiple of block size */ i = from_buffer(STp->buffer, buf, transfer); if (i) { retval = i; goto out; } STp->logical_blk_num += transfer / STp->block_size; STps->drv_block += transfer / STp->block_size; filp->f_pos += transfer; buf += transfer; total += transfer; } if ((STp->buffer)->buffer_bytes == 0) { #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Finished with frame %d\n", dev, STp->frame_seq_number); #endif STp->frame_in_buffer = 0; STp->frame_seq_number++; /* frame to look for next time */ } } /* for (total = 0, special = 0; total < count && !special; ) */ /* Change the eof state if no data from tape or buffer */ if (total == 0) { if (STps->eof == ST_FM_HIT) { STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_FM; STps->drv_block = 0; if (STps->drv_file >= 0) STps->drv_file++; } else if (STps->eof == ST_EOD_1) { STps->eof = ST_EOD_2; if (STps->drv_block > 0 && STps->drv_file >= 0) STps->drv_file++; STps->drv_block = 0; } else if (STps->eof == ST_EOD_2) STps->eof = ST_EOD; } else if (STps->eof == ST_FM) STps->eof = ST_NOEOF; retval = total; out: if (SRpnt != NULL) scsi_release_request(SRpnt); up(&STp->lock); return retval; } /* Set the driver options */ static void osst_log_options(OS_Scsi_Tape *STp, ST_mode *STm, int dev) { printk(KERN_INFO "osst%d:I: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n", dev, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes, STm->do_read_ahead); printk(KERN_INFO "osst%d:I: can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n", dev, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock); printk(KERN_INFO "osst%d:I: defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n", dev, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions, STp->scsi2_logical); printk(KERN_INFO "osst%d:I: sysv: %d\n", dev, STm->sysv); #if DEBUG printk(KERN_INFO "osst%d:D: debugging: %d\n", dev, debugging); #endif } static int osst_set_options(OS_Scsi_Tape *STp, long options) { int value; long code; ST_mode *STm; int dev = TAPE_NR(STp->devt); STm = &(STp->modes[STp->current_mode]); if (!STm->defined) { memcpy(STm, &(STp->modes[0]), sizeof(ST_mode)); modes_defined = TRUE; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Initialized mode %d definition from mode 0\n", dev, STp->current_mode); #endif } code = options & MT_ST_OPTIONS; if (code == MT_ST_BOOLEANS) { STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0; STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0; STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0; STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0; STp->two_fm = (options & MT_ST_TWO_FM) != 0; STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0; STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0; STp->can_bsr = (options & MT_ST_CAN_BSR) != 0; STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0; if ((STp->device)->scsi_level >= SCSI_2) STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0; STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0; STm->sysv = (options & MT_ST_SYSV) != 0; #if DEBUG debugging = (options & MT_ST_DEBUGGING) != 0; #endif osst_log_options(STp, STm, dev); } else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) { value = (code == MT_ST_SETBOOLEANS); if ((options & MT_ST_BUFFER_WRITES) != 0) STm->do_buffer_writes = value; if ((options & MT_ST_ASYNC_WRITES) != 0) STm->do_async_writes = value; if ((options & MT_ST_DEF_WRITES) != 0) STm->defaults_for_writes = value; if ((options & MT_ST_READ_AHEAD) != 0) STm->do_read_ahead = value; if ((options & MT_ST_TWO_FM) != 0) STp->two_fm = value; if ((options & MT_ST_FAST_MTEOM) != 0) STp->fast_mteom = value; if ((options & MT_ST_AUTO_LOCK) != 0) STp->do_auto_lock = value; if ((options & MT_ST_CAN_BSR) != 0) STp->can_bsr = value; if ((options & MT_ST_NO_BLKLIMS) != 0) STp->omit_blklims = value; if ((STp->device)->scsi_level >= SCSI_2 && (options & MT_ST_CAN_PARTITIONS) != 0) STp->can_partitions = value; if ((options & MT_ST_SCSI2LOGICAL) != 0) STp->scsi2_logical = value; if ((options & MT_ST_SYSV) != 0) STm->sysv = value; #if DEBUG if ((options & MT_ST_DEBUGGING) != 0) debugging = value; #endif osst_log_options(STp, STm, dev); } else if (code == MT_ST_WRITE_THRESHOLD) { value = (options & ~MT_ST_OPTIONS) * ST_KILOBYTE; if (value < 1 || value > osst_buffer_size) { printk(KERN_WARNING "osst%d:W: Write threshold %d too small or too large.\n", dev, value); return (-EIO); } STp->write_threshold = value; printk(KERN_INFO "osst%d:I: Write threshold set to %d bytes.\n", dev, value); } else if (code == MT_ST_DEF_BLKSIZE) { value = (options & ~MT_ST_OPTIONS); if (value == ~MT_ST_OPTIONS) { STm->default_blksize = (-1); printk(KERN_INFO "osst%d:I: Default block size disabled.\n", dev); } else { if (value < 512 || value > OS_DATA_SIZE || OS_DATA_SIZE % value) { printk(KERN_WARNING "osst%d:W: Default block size cannot be set to %d.\n", dev, value); return (-EINVAL); } STm->default_blksize = value; printk(KERN_INFO "osst%d:I: Default block size set to %d bytes.\n", dev, STm->default_blksize); } } else if (code == MT_ST_TIMEOUTS) { value = (options & ~MT_ST_OPTIONS); if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) { STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ; printk(KERN_INFO "osst%d:I: Long timeout set to %d seconds.\n", dev, (value & ~MT_ST_SET_LONG_TIMEOUT)); } else { STp->timeout = value * HZ; printk(KERN_INFO "osst%d:I: Normal timeout set to %d seconds.\n", dev, value); } } else if (code == MT_ST_DEF_OPTIONS) { code = (options & ~MT_ST_CLEAR_DEFAULT); value = (options & MT_ST_CLEAR_DEFAULT); if (code == MT_ST_DEF_DENSITY) { if (value == MT_ST_CLEAR_DEFAULT) { STm->default_density = (-1); printk(KERN_INFO "osst%d:I: Density default disabled.\n", dev); } else { STm->default_density = value & 0xff; printk(KERN_INFO "osst%d:I: Density default set to %x\n", dev, STm->default_density); } } else if (code == MT_ST_DEF_DRVBUFFER) { if (value == MT_ST_CLEAR_DEFAULT) { STp->default_drvbuffer = 0xff; printk(KERN_INFO "osst%d:I: Drive buffer default disabled.\n", dev); } else { STp->default_drvbuffer = value & 7; printk(KERN_INFO "osst%d:I: Drive buffer default set to %x\n", dev, STp->default_drvbuffer); } } else if (code == MT_ST_DEF_COMPRESSION) { if (value == MT_ST_CLEAR_DEFAULT) { STm->default_compression = ST_DONT_TOUCH; printk(KERN_INFO "osst%d:I: Compression default disabled.\n", dev); } else { STm->default_compression = (value & 1 ? ST_YES : ST_NO); printk(KERN_INFO "osst%d:I: Compression default set to %x\n", dev, (value & 1)); } } } else return (-EIO); return 0; } /* Internal ioctl function */ static int osst_int_ioctl(OS_Scsi_Tape * STp, Scsi_Request ** aSRpnt, unsigned int cmd_in, unsigned long arg) { int timeout; long ltmp; int i, ioctl_result; int chg_eof = TRUE; unsigned char cmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt = * aSRpnt; ST_partstat * STps; int fileno, blkno, at_sm, frame_seq_numbr, logical_blk_num; int datalen = 0, direction = SCSI_DATA_NONE; int dev = TAPE_NR(STp->devt); if (STp->ready != ST_READY && cmd_in != MTLOAD) { if (STp->ready == ST_NO_TAPE) return (-ENOMEDIUM); else return (-EIO); } timeout = STp->long_timeout; STps = &(STp->ps[STp->partition]); fileno = STps->drv_file; blkno = STps->drv_block; at_sm = STps->at_sm; frame_seq_numbr = STp->frame_seq_number; logical_blk_num = STp->logical_blk_num; memset(cmd, 0, MAX_COMMAND_SIZE); switch (cmd_in) { case MTFSFM: chg_eof = FALSE; /* Changed from the FSF after this */ case MTFSF: if (STp->raw) return (-EIO); if (STp->linux_media) ioctl_result = osst_space_over_filemarks_forward_fast(STp, &SRpnt, cmd_in, arg); else ioctl_result = osst_space_over_filemarks_forward_slow(STp, &SRpnt, cmd_in, arg); if (fileno >= 0) fileno += arg; blkno = 0; at_sm &= (arg == 0); goto os_bypass; case MTBSF: chg_eof = FALSE; /* Changed from the FSF after this */ case MTBSFM: if (STp->raw) return (-EIO); ioctl_result = osst_space_over_filemarks_backward(STp, &SRpnt, cmd_in, arg); if (fileno >= 0) fileno -= arg; blkno = (-1); /* We can't know the block number */ at_sm &= (arg == 0); goto os_bypass; case MTFSR: case MTBSR: #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Skipping %lu blocks %s from logical block %d\n", dev, arg, cmd_in==MTFSR?"forward":"backward", logical_blk_num); #endif if (cmd_in == MTFSR) { logical_blk_num += arg; if (blkno >= 0) blkno += arg; } else { logical_blk_num -= arg; if (blkno >= 0) blkno -= arg; } ioctl_result = osst_seek_logical_blk(STp, &SRpnt, logical_blk_num); fileno = STps->drv_file; blkno = STps->drv_block; at_sm &= (arg == 0); goto os_bypass; case MTFSS: cmd[0] = SPACE; cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */ cmd[2] = (arg >> 16); cmd[3] = (arg >> 8); cmd[4] = arg; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Spacing tape forward %d setmarks.\n", dev, cmd[2] * 65536 + cmd[3] * 256 + cmd[4]); #endif if (arg != 0) { blkno = fileno = (-1); at_sm = 1; } break; case MTBSS: cmd[0] = SPACE; cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */ ltmp = (-arg); cmd[2] = (ltmp >> 16); cmd[3] = (ltmp >> 8); cmd[4] = ltmp; #if DEBUG if (debugging) { if (cmd[2] & 0x80) ltmp = 0xff000000; ltmp = ltmp | (cmd[2] << 16) | (cmd[3] << 8) | cmd[4]; printk(OSST_DEB_MSG "osst%d:D: Spacing tape backward %ld setmarks.\n", dev, (-ltmp)); } #endif if (arg != 0) { blkno = fileno = (-1); at_sm = 1; } break; case MTWEOF: if ( STps->rw == ST_WRITING && !(STp->device)->was_reset) ioctl_result = osst_flush_write_buffer(STp, &SRpnt); else ioctl_result = 0; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Writing %ld filemark(s).\n", dev, arg); #endif for (i=0; i= 0) fileno += arg; if (blkno >= 0) blkno = 0; goto os_bypass; case MTWSM: if (STp->write_prot) return (-EACCES); if (!STp->raw) return 0; cmd[0] = WRITE_FILEMARKS; /* FIXME -- need OS version */ if (cmd_in == MTWSM) cmd[1] = 2; cmd[2] = (arg >> 16); cmd[3] = (arg >> 8); cmd[4] = arg; timeout = STp->timeout; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Writing %d setmark(s).\n", dev, cmd[2] * 65536 + cmd[3] * 256 + cmd[4]); #endif if (fileno >= 0) fileno += arg; blkno = 0; at_sm = (cmd_in == MTWSM); break; case MTOFFL: case MTLOAD: case MTUNLOAD: case MTRETEN: cmd[0] = START_STOP; cmd[1] = 1; /* Don't wait for completion */ if (cmd_in == MTLOAD) { if (STp->ready == ST_NO_TAPE) cmd[4] = 4; /* open tray */ else cmd[4] = 1; /* load */ } if (cmd_in == MTRETEN) cmd[4] = 3; /* retension then mount */ if (cmd_in == MTOFFL) cmd[4] = 4; /* rewind then eject */ timeout = STp->timeout; #if DEBUG if (debugging) { switch (cmd_in) { case MTUNLOAD: printk(OSST_DEB_MSG "osst%d:D: Unloading tape.\n", dev); break; case MTLOAD: printk(OSST_DEB_MSG "osst%d:D: Loading tape.\n", dev); break; case MTRETEN: printk(OSST_DEB_MSG "osst%d:D: Retensioning tape.\n", dev); break; case MTOFFL: printk(OSST_DEB_MSG "osst%d:D: Ejecting tape.\n", dev); break; } } #endif fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ; break; case MTNOP: #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: No-op on tape.\n", dev); #endif return 0; /* Should do something ? */ break; case MTEOM: #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Spacing to end of recorded medium.\n", dev); #endif osst_set_frame_position(STp, &SRpnt, STp->eod_frame_ppos, 0); if (osst_get_logical_frame(STp, &SRpnt, -1, 0) < 0) { ioctl_result = -EIO; goto os_bypass; } if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_EOD) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: No EOD frame found where expected.\n", dev); #endif ioctl_result = -EIO; goto os_bypass; } ioctl_result = osst_set_frame_position(STp, &SRpnt, STp->eod_frame_ppos, 0); fileno = STp->filemark_cnt; blkno = at_sm = 0; goto os_bypass; case MTERASE: if (STp->write_prot) return (-EACCES); ioctl_result = osst_reset_header(STp, &SRpnt); i = osst_write_eod(STp, &SRpnt); if (i < ioctl_result) ioctl_result = i; i = osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos); if (i < ioctl_result) ioctl_result = i; fileno = blkno = at_sm = 0 ; goto os_bypass; case MTREW: cmd[0] = REZERO_UNIT; /* rewind */ cmd[1] = 1; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Rewinding tape, Immed=%d.\n", dev, cmd[1]); #endif fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ; break; case MTLOCK: chg_eof = FALSE; cmd[0] = ALLOW_MEDIUM_REMOVAL; cmd[4] = SCSI_REMOVAL_PREVENT; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Locking drive door.\n", dev); #endif break; case MTUNLOCK: chg_eof = FALSE; cmd[0] = ALLOW_MEDIUM_REMOVAL; cmd[4] = SCSI_REMOVAL_ALLOW; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Unlocking drive door.\n", dev); #endif break; case MTSETBLK: /* Set block length */ case MTSETDENSITY: /* Set tape density */ case MTSETDRVBUFFER: /* Set drive buffering */ case SET_DENS_AND_BLK: /* Set density and block size */ chg_eof = FALSE; if (STp->dirty || (STp->buffer)->buffer_bytes != 0) return (-EIO); /* Not allowed if data in buffer */ if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) && (arg & MT_ST_BLKSIZE_MASK) != 0 && ((arg & MT_ST_BLKSIZE_MASK) < STp->min_block || (arg & MT_ST_BLKSIZE_MASK) > STp->max_block || (arg & MT_ST_BLKSIZE_MASK) > osst_buffer_size)) { printk(KERN_WARNING "osst%d:W: Illegal block size.\n", dev); return (-EINVAL); } return 0; /* FIXME silently ignore if block size didn't change */ default: return (-ENOSYS); } SRpnt = osst_do_scsi(SRpnt, STp, cmd, datalen, direction, timeout, MAX_RETRIES, TRUE); ioctl_result = (STp->buffer)->syscall_result; if (!SRpnt) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Couldn't exec scsi cmd for IOCTL\n", dev); #endif return ioctl_result; } if (!ioctl_result) { /* SCSI command successful */ STp->frame_seq_number = frame_seq_numbr; STp->logical_blk_num = logical_blk_num; } os_bypass: #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: IOCTL (%d) Result=%d\n", dev, cmd_in, ioctl_result); #endif if (!ioctl_result) { /* success */ if (cmd_in == MTFSFM) { fileno--; blkno--; } if (cmd_in == MTBSFM) { fileno++; blkno++; } STps->drv_block = blkno; STps->drv_file = fileno; STps->at_sm = at_sm; if (cmd_in == MTLOCK) STp->door_locked = ST_LOCKED_EXPLICIT; else if (cmd_in == MTUNLOCK) STp->door_locked = ST_UNLOCKED; if (cmd_in == MTEOM) STps->eof = ST_EOD; else if (cmd_in == MTFSF) STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_FM; else if (chg_eof) STps->eof = ST_NOEOF; if (cmd_in == MTOFFL || cmd_in == MTUNLOAD) STp->rew_at_close = 0; else if (cmd_in == MTLOAD) { /* STp->rew_at_close = (MINOR(inode->i_rdev) & 0x80) == 0; FIXME */ for (i=0; i < ST_NBR_PARTITIONS; i++) { STp->ps[i].rw = ST_IDLE; STp->ps[i].last_block_valid = FALSE;/* FIXME - where else is this field maintained? */ } STp->partition = 0; } if (cmd_in == MTREW) { ioctl_result = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos); if (ioctl_result > 0) ioctl_result = 0; } } else if (cmd_in == MTBSF || cmd_in == MTBSFM ) { if (osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos) < 0) STps->drv_file = STps->drv_block = -1; else STps->drv_file = STps->drv_block = 0; STps->eof = ST_NOEOF; } else if (cmd_in == MTFSF || cmd_in == MTFSFM) { if (osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0) STps->drv_file = STps->drv_block = -1; else { STps->drv_file = STp->filemark_cnt; STps->drv_block = 0; } STps->eof = ST_EOD; } else if (cmd_in == MTBSR || cmd_in == MTFSR || cmd_in == MTWEOF || cmd_in == MTEOM) { STps->drv_file = STps->drv_block = (-1); STps->eof = ST_NOEOF; STp->header_ok = 0; } else if (cmd_in == MTERASE) { STp->header_ok = 0; } else if (SRpnt) { /* SCSI command was not completely successful. */ if (SRpnt->sr_sense_buffer[2] & 0x40) { STps->eof = ST_EOM_OK; STps->drv_block = 0; } if (chg_eof) STps->eof = ST_NOEOF; if ((SRpnt->sr_sense_buffer[2] & 0x0f) == BLANK_CHECK) STps->eof = ST_EOD; if (cmd_in == MTLOCK) STp->door_locked = ST_LOCK_FAILS; if (cmd_in == MTLOAD && osst_wait_for_medium(STp, &SRpnt, 60)) ioctl_result = osst_wait_ready(STp, &SRpnt, 5 * 60); } *aSRpnt = SRpnt; return ioctl_result; } /* Open the device */ static int os_scsi_tape_open(struct inode * inode, struct file * filp) { unsigned short flags; int i, b_size, need_dma_buffer, new_session = FALSE, retval = 0; unsigned char cmd[MAX_COMMAND_SIZE]; Scsi_Request * SRpnt; OS_Scsi_Tape * STp; ST_mode * STm; ST_partstat * STps; int dev = TAPE_NR(inode->i_rdev); int mode = TAPE_MODE(inode->i_rdev); if (dev >= osst_template.dev_max || (STp = os_scsi_tapes[dev]) == NULL || !STp->device) return (-ENXIO); if( !scsi_block_when_processing_errors(STp->device) ) { return -ENXIO; } if (STp->in_use) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Device already in use.\n", dev); #endif return (-EBUSY); } STp->in_use = 1; STp->rew_at_close = (MINOR(inode->i_rdev) & 0x80) == 0; if (STp->device->host->hostt->module) __MOD_INC_USE_COUNT(STp->device->host->hostt->module); if (osst_template.module) __MOD_INC_USE_COUNT(osst_template.module); STp->device->access_count++; if (mode != STp->current_mode) { #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Mode change from %d to %d.\n", dev, STp->current_mode, mode); #endif new_session = TRUE; STp->current_mode = mode; } STm = &(STp->modes[STp->current_mode]); flags = filp->f_flags; STp->write_prot = ((flags & O_ACCMODE) == O_RDONLY); STp->raw = (MINOR(inode->i_rdev) & 0x40) != 0; if (STp->raw) STp->header_ok = 0; /* Allocate a buffer for this user */ need_dma_buffer = STp->restr_dma; for (i=0; i < osst_nbr_buffers; i++) if (!osst_buffers[i]->in_use && (!need_dma_buffer || osst_buffers[i]->dma)) break; if (i >= osst_nbr_buffers) { STp->buffer = new_tape_buffer(FALSE, need_dma_buffer); if (STp->buffer == NULL) { printk(KERN_WARNING "osst%d:W: Can't allocate tape buffer.\n", dev); retval = (-EBUSY); goto err_out; } } else STp->buffer = osst_buffers[i]; (STp->buffer)->in_use = 1; (STp->buffer)->writing = 0; (STp->buffer)->syscall_result = 0; (STp->buffer)->use_sg = STp->device->host->sg_tablesize; /* Compute the usable buffer size for this SCSI adapter */ if (!(STp->buffer)->use_sg) (STp->buffer)->buffer_size = (STp->buffer)->sg[0].length; else { for (i=0, (STp->buffer)->buffer_size = 0; i < (STp->buffer)->use_sg && i < (STp->buffer)->sg_segs; i++) (STp->buffer)->buffer_size += (STp->buffer)->sg[i].length; } STp->dirty = 0; for (i=0; i < ST_NBR_PARTITIONS; i++) { STps = &(STp->ps[i]); STps->rw = ST_IDLE; } STp->ready = ST_READY; #if DEBUG STp->nbr_waits = STp->nbr_finished = 0; #endif memset (cmd, 0, MAX_COMMAND_SIZE); cmd[0] = TEST_UNIT_READY; SRpnt = osst_do_scsi(NULL, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_READY_RETRIES, TRUE); if (!SRpnt) { retval = (STp->buffer)->syscall_result; goto err_out; } if ((SRpnt->sr_sense_buffer[0] & 0x70) == 0x70 && (SRpnt->sr_sense_buffer[2] & 0x0f) == NOT_READY && SRpnt->sr_sense_buffer[12] == 4 ) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Unit not ready, cause %x\n", dev, SRpnt->sr_sense_buffer[13]); #endif if (SRpnt->sr_sense_buffer[13] == 2) { /* initialize command required (LOAD) */ memset (cmd, 0, MAX_COMMAND_SIZE); cmd[0] = START_STOP; cmd[1] = 1; cmd[4] = 1; SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_READY_RETRIES, TRUE); } osst_wait_ready(STp, &SRpnt, (SRpnt->sr_sense_buffer[13]==1?15:3) * 60); } if ((SRpnt->sr_sense_buffer[0] & 0x70) == 0x70 && (SRpnt->sr_sense_buffer[2] & 0x0f) == UNIT_ATTENTION) { /* New media? */ #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Unit wants attention\n", dev); #endif STp->header_ok = 0; for (i=0; i < 10; i++) { memset (cmd, 0, MAX_COMMAND_SIZE); cmd[0] = TEST_UNIT_READY; SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_READY_RETRIES, TRUE); if ((SRpnt->sr_sense_buffer[0] & 0x70) != 0x70 || (SRpnt->sr_sense_buffer[2] & 0x0f) != UNIT_ATTENTION) break; } STp->device->was_reset = 0; STp->partition = STp->new_partition = 0; if (STp->can_partitions) STp->nbr_partitions = 1; /* This guess will be updated later if necessary */ for (i=0; i < ST_NBR_PARTITIONS; i++) { STps = &(STp->ps[i]); STps->rw = ST_IDLE; /* FIXME - seems to be redundant... */ STps->eof = ST_NOEOF; STps->at_sm = 0; STps->last_block_valid = FALSE; STps->drv_block = 0; STps->drv_file = 0 ; } new_session = TRUE; STp->recover_count = 0; } /* * if we have valid headers from before, and the drive/tape seem untouched, * open without reconfiguring and re-reading the headers */ if (!STp->buffer->syscall_result && STp->header_ok && !SRpnt->sr_result && SRpnt->sr_sense_buffer[0] == 0) { memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = MODE_SENSE; cmd[1] = 8; cmd[2] = VENDOR_IDENT_PAGE; cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH; SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], SCSI_DATA_READ, STp->timeout, 0, TRUE); if (STp->buffer->syscall_result || STp->buffer->b_data[MODE_HEADER_LENGTH + 2] != 'L' || STp->buffer->b_data[MODE_HEADER_LENGTH + 3] != 'I' || STp->buffer->b_data[MODE_HEADER_LENGTH + 4] != 'N' || STp->buffer->b_data[MODE_HEADER_LENGTH + 5] != '4' ) { #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Signature was changed to %c%c%c%c\n", dev, STp->buffer->b_data[MODE_HEADER_LENGTH + 2], STp->buffer->b_data[MODE_HEADER_LENGTH + 3], STp->buffer->b_data[MODE_HEADER_LENGTH + 4], STp->buffer->b_data[MODE_HEADER_LENGTH + 5]); #endif STp->header_ok = 0; } i = STp->first_frame_position; if (STp->header_ok && i == osst_get_frame_position(STp, &SRpnt)) { if (STp->door_locked == ST_UNLOCKED) { if (osst_int_ioctl(STp, &SRpnt, MTLOCK, 0)) printk(KERN_INFO "osst%d:I: Can't lock drive door\n", dev); else STp->door_locked = ST_LOCKED_AUTO; } if (!STp->frame_in_buffer) { STp->block_size = (STm->default_blksize > 0) ? STm->default_blksize : OS_DATA_SIZE; STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0; } STp->buffer->buffer_blocks = OS_DATA_SIZE / STp->block_size; STp->fast_open = TRUE; scsi_release_request(SRpnt); return 0; } #if DEBUG if (i != STp->first_frame_position) printk(OSST_DEB_MSG "osst%d:D: Tape position changed from %d to %d\n", dev, i, STp->first_frame_position); #endif STp->header_ok = 0; } STp->fast_open = FALSE; if ((STp->buffer)->syscall_result != 0 && /* in all error conditions except no medium */ (SRpnt->sr_sense_buffer[2] != 2 || SRpnt->sr_sense_buffer[12] != 0x3A) ) { memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = MODE_SELECT; cmd[1] = 0x10; cmd[4] = 4 + MODE_HEADER_LENGTH; (STp->buffer)->b_data[0] = cmd[4] - 1; (STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */ (STp->buffer)->b_data[2] = 0; /* Reserved */ (STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */ (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = 0x3f; (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 1; (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 2; (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 3; #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Applying soft reset\n", dev); #endif SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], SCSI_DATA_WRITE, STp->timeout, 0, TRUE); STp->header_ok = 0; for (i=0; i < 10; i++) { memset (cmd, 0, MAX_COMMAND_SIZE); cmd[0] = TEST_UNIT_READY; SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, SCSI_DATA_NONE, STp->timeout, MAX_READY_RETRIES, TRUE); if ((SRpnt->sr_sense_buffer[0] & 0x70) != 0x70 || (SRpnt->sr_sense_buffer[2] & 0x0f) == NOT_READY) break; if ((SRpnt->sr_sense_buffer[2] & 0x0f) == UNIT_ATTENTION) { STp->device->was_reset = 0; STp->partition = STp->new_partition = 0; if (STp->can_partitions) STp->nbr_partitions = 1; /* This guess will be updated later if necessary */ for (i=0; i < ST_NBR_PARTITIONS; i++) { STps = &(STp->ps[i]); STps->rw = ST_IDLE; STps->eof = ST_NOEOF; STps->at_sm = 0; STps->last_block_valid = FALSE; STps->drv_block = 0; STps->drv_file = 0 ; } new_session = TRUE; } } } if (osst_wait_ready(STp, &SRpnt, 15 * 60)) /* FIXME - not allowed with NOBLOCK */ printk(KERN_INFO "osst%i:I: Device did not become Ready in open\n",dev); if ((STp->buffer)->syscall_result != 0) { if ((STp->device)->scsi_level >= SCSI_2 && (SRpnt->sr_sense_buffer[0] & 0x70) == 0x70 && (SRpnt->sr_sense_buffer[2] & 0x0f) == NOT_READY && SRpnt->sr_sense_buffer[12] == 0x3a) { /* Check ASC */ STp->ready = ST_NO_TAPE; } else STp->ready = ST_NOT_READY; scsi_release_request(SRpnt); SRpnt = NULL; STp->density = 0; /* Clear the erroneous "residue" */ STp->write_prot = 0; STp->block_size = 0; STp->ps[0].drv_file = STp->ps[0].drv_block = (-1); STp->partition = STp->new_partition = 0; STp->door_locked = ST_UNLOCKED; return 0; } osst_configure_onstream(STp, &SRpnt); /* STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0; FIXME */ if (OS_FRAME_SIZE > (STp->buffer)->buffer_size && !enlarge_buffer(STp->buffer, OS_FRAME_SIZE, STp->restr_dma)) { printk(KERN_NOTICE "osst%d:A: Framesize %d too large for buffer.\n", dev, OS_FRAME_SIZE); retval = (-EIO); goto err_out; } if ((STp->buffer)->buffer_size >= OS_FRAME_SIZE) { for (i = 0, b_size = 0; i < STp->buffer->sg_segs && (b_size + STp->buffer->sg[i].length) <= OS_DATA_SIZE; b_size += STp->buffer->sg[i++].length); STp->buffer->aux = (os_aux_t *) (STp->buffer->sg[i].address + OS_DATA_SIZE - b_size); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: b_data points to %p in segment 0 at %p\n", dev, STp->buffer->b_data, STp->buffer->sg[0].address); printk(OSST_DEB_MSG "osst%d:D: AUX points to %p in segment %d at %p\n", dev, STp->buffer->aux, i, STp->buffer->sg[i].address); #endif } else STp->buffer->aux = NULL; /* this had better never happen! */ STp->block_size = STp->raw ? OS_FRAME_SIZE : ( (STm->default_blksize > 0) ? STm->default_blksize : OS_DATA_SIZE); STp->buffer->buffer_blocks = STp->raw ? 1 : OS_DATA_SIZE / STp->block_size; STp->buffer->buffer_bytes = STp->buffer->read_pointer = STp->frame_in_buffer = 0; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Block size: %d, frame size: %d, buffer size: %d (%d blocks).\n", dev, STp->block_size, OS_FRAME_SIZE, (STp->buffer)->buffer_size, (STp->buffer)->buffer_blocks); #endif if (STp->drv_write_prot) { STp->write_prot = 1; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Write protected\n", dev); #endif if ((flags & O_ACCMODE) == O_WRONLY || (flags & O_ACCMODE) == O_RDWR) { retval = (-EROFS); goto err_out; } } if (new_session) { /* Change the drive parameters for the new mode */ #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: New Session\n", dev); #endif STp->density_changed = STp->blksize_changed = FALSE; STp->compression_changed = FALSE; } /* * properly position the tape and check the ADR headers */ if (STp->door_locked == ST_UNLOCKED) { if (osst_int_ioctl(STp, &SRpnt, MTLOCK, 0)) printk(KERN_INFO "osst%d:I: Can't lock drive door\n", dev); else STp->door_locked = ST_LOCKED_AUTO; } osst_analyze_headers(STp, &SRpnt); scsi_release_request(SRpnt); SRpnt = NULL; return 0; err_out: if (SRpnt != NULL) scsi_release_request(SRpnt); if (STp->buffer != NULL) { STp->buffer->in_use = 0; STp->buffer = NULL; } STp->in_use = 0; STp->header_ok = 0; STp->device->access_count--; if (STp->device->host->hostt->module) __MOD_DEC_USE_COUNT(STp->device->host->hostt->module); if (osst_template.module) __MOD_DEC_USE_COUNT(osst_template.module); return retval; } /* Flush the tape buffer before close */ static int os_scsi_tape_flush(struct file * filp) { int result = 0, result2; OS_Scsi_Tape * STp; ST_mode * STm; ST_partstat * STps; Scsi_Request *SRpnt = NULL; struct inode *inode = filp->f_dentry->d_inode; kdev_t devt = inode->i_rdev; int dev; if (file_count(filp) > 1) return 0; dev = TAPE_NR(devt); STp = os_scsi_tapes[dev]; STm = &(STp->modes[STp->current_mode]); STps = &(STp->ps[STp->partition]); if ( STps->rw == ST_WRITING && !(STp->device)->was_reset) { result = osst_flush_write_buffer(STp, &SRpnt); if (result != 0 && result != (-ENOSPC)) goto out; } if ( STps->rw >= ST_WRITING && !(STp->device)->was_reset) { #if DEBUG if (debugging) { printk(OSST_DEB_MSG "osst%d:D: File length %ld bytes.\n", dev, (long)(filp->f_pos)); printk(OSST_DEB_MSG "osst%d:D: Async write waits %d, finished %d.\n", dev, STp->nbr_waits, STp->nbr_finished); } #endif if (STp->write_type != OS_WRITE_NEW_MARK) { /* true unless the user wrote the filemark for us */ result = osst_flush_drive_buffer(STp, &SRpnt); if (result < 0) goto out; result = osst_write_filemark(STp, &SRpnt); if (result < 0) goto out; if (STps->drv_file >= 0) STps->drv_file++ ; STps->drv_block = 0; } result = osst_write_eod(STp, &SRpnt); osst_write_header(STp, &SRpnt, !(STp->rew_at_close)); STps->eof = ST_FM; #if DEBUG if (debugging) printk(OSST_DEB_MSG "osst%d:D: Buffer flushed, %d EOF(s) written\n", dev, 1+STp->two_fm); #endif } else if (!STp->rew_at_close) { STps = &(STp->ps[STp->partition]); if (!STm->sysv || STps->rw != ST_READING) { if (STp->can_bsr) result = osst_flush_buffer(STp, &SRpnt, 0); /* this is the default path */ else if (STps->eof == ST_FM_HIT) { result = cross_eof(STp, &SRpnt, FALSE); if (result) { if (STps->drv_file >= 0) STps->drv_file++; STps->drv_block = 0; STps->eof = ST_FM; } else STps->eof = ST_NOEOF; } } else if ((STps->eof == ST_NOEOF && !(result = cross_eof(STp, &SRpnt, TRUE))) || STps->eof == ST_FM_HIT) { if (STps->drv_file >= 0) STps->drv_file++; STps->drv_block = 0; STps->eof = ST_FM; } } out: if (STp->rew_at_close) { result2 = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos); STps->drv_file = STps->drv_block = STp->frame_seq_number = STp->logical_blk_num = 0; if (result == 0 && result2 < 0) result = result2; } if (SRpnt) scsi_release_request(SRpnt); if (STp->recover_count) { printk(KERN_INFO "osst%d:I: %d recovered errors in", dev, STp->recover_count); if (STp->write_count) printk(" %d frames written", STp->write_count); if (STp->read_count) printk(" %d frames read", STp->read_count); printk("\n"); STp->recover_count = 0; } STp->write_count = 0; STp->read_count = 0; return result; } /* Close the device and release it */ static int os_scsi_tape_close(struct inode * inode, struct file * filp) { int result = 0; OS_Scsi_Tape * STp; Scsi_Request * SRpnt = NULL; kdev_t devt = inode->i_rdev; int dev; dev = TAPE_NR(devt); STp = os_scsi_tapes[dev]; if (STp->door_locked == ST_LOCKED_AUTO) osst_int_ioctl(STp, &SRpnt, MTUNLOCK, 0); if (SRpnt) scsi_release_request(SRpnt); if (STp->buffer != NULL) STp->buffer->in_use = 0; if (STp->raw) STp->header_ok = 0; STp->in_use = 0; STp->device->access_count--; if (STp->device->host->hostt->module) __MOD_DEC_USE_COUNT(STp->device->host->hostt->module); if(osst_template.module) __MOD_DEC_USE_COUNT(osst_template.module); return result; } /* The ioctl command */ static int osst_ioctl(struct inode * inode,struct file * file, unsigned int cmd_in, unsigned long arg) { int i, cmd_nr, cmd_type, retval = 0; unsigned int blk; OS_Scsi_Tape *STp; ST_mode *STm; ST_partstat *STps; Scsi_Request *SRpnt = NULL; int dev = TAPE_NR(inode->i_rdev); STp = os_scsi_tapes[dev]; if (down_interruptible(&STp->lock)) return -ERESTARTSYS; #if DEBUG if (debugging && !STp->in_use) { printk(OSST_DEB_MSG "osst%d:D: Incorrect device.\n", dev); retval = (-EIO); goto out; } #endif STm = &(STp->modes[STp->current_mode]); STps = &(STp->ps[STp->partition]); /* * If we are in the middle of error recovery, don't let anyone * else try and use this device. Also, if error recovery fails, it * may try and take the device offline, in which case all further * access to the device is prohibited. */ if( !scsi_block_when_processing_errors(STp->device) ) { retval = (-ENXIO); goto out; } cmd_type = _IOC_TYPE(cmd_in); cmd_nr = _IOC_NR(cmd_in); #if DEBUG printk(OSST_DEB_MSG "osst%d:D: Ioctl %d,%d in %s mode\n", dev, cmd_type, cmd_nr, STp->raw?"raw":"normal"); #endif if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) { struct mtop mtc; if (_IOC_SIZE(cmd_in) != sizeof(mtc)) { retval = (-EINVAL); goto out; } i = copy_from_user((char *) &mtc, (char *)arg, sizeof(struct mtop)); if (i) { retval = (-EFAULT); goto out; } if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) { printk(KERN_WARNING "osst%d:W: MTSETDRVBUFFER only allowed for root.\n", dev); retval = (-EPERM); goto out; } if (!STm->defined && (mtc.mt_op != MTSETDRVBUFFER && (mtc.mt_count & MT_ST_OPTIONS) == 0)) { retval = (-ENXIO); goto out; } if (!(STp->device)->was_reset) { if (STps->eof == ST_FM_HIT) { if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM|| mtc.mt_op == MTEOM) { mtc.mt_count -= 1; if (STps->drv_file >= 0) STps->drv_file += 1; } else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) { mtc.mt_count += 1; if (STps->drv_file >= 0) STps->drv_file += 1; } } if (mtc.mt_op == MTSEEK) { /* Old position must be restored if partition will be changed */ i = !STp->can_partitions || (STp->new_partition != STp->partition); } else { i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL || mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM || mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD || mtc.mt_op == MTCOMPRESSION; } i = osst_flush_buffer(STp, &SRpnt, i); if (i < 0) { retval = i; goto out; } } else { /* * If there was a bus reset, block further access * to this device. If the user wants to rewind the tape, * then reset the flag and allow access again. */ if(mtc.mt_op != MTREW && mtc.mt_op != MTOFFL && mtc.mt_op != MTRETEN && mtc.mt_op != MTERASE && mtc.mt_op != MTSEEK && mtc.mt_op != MTEOM) { retval = (-EIO); goto out; } STp->device->was_reset = 0; if (STp->door_locked != ST_UNLOCKED && STp->door_locked != ST_LOCK_FAILS) { if (osst_int_ioctl(STp, &SRpnt, MTLOCK, 0)) { printk(KERN_NOTICE "osst%d:I: Could not relock door after bus reset.\n", dev); STp->door_locked = ST_UNLOCKED; } } } if (mtc.mt_op != MTNOP && mtc.mt_op != MTWEOF && mtc.mt_op != MTWSM && mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTSETBLK && mtc.mt_op != MTSETDRVBUFFER && mtc.mt_op != MTSETPART) STps->rw = ST_IDLE; /* Prevent automatic WEOF and fsf */ if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED) osst_int_ioctl(STp, &SRpnt, MTUNLOCK, 0); /* Ignore result! */ if (mtc.mt_op == MTSETDRVBUFFER && (mtc.mt_count & MT_ST_OPTIONS) != 0) { retval = osst_set_options(STp, mtc.mt_count); goto out; } if (mtc.mt_op == MTSETPART) { /* if (!STp->can_partitions || mtc.mt_count < 0 || mtc.mt_count >= ST_NBR_PARTITIONS) return (-EINVAL); if (mtc.mt_count >= STp->nbr_partitions && (STp->nbr_partitions = nbr_partitions(inode)) < 0) return (-EIO);*/ if (mtc.mt_count >= STp->nbr_partitions) retval = -EINVAL; else { STp->new_partition = mtc.mt_count; retval = 0; } goto out; } if (mtc.mt_op == MTMKPART) { if (!STp->can_partitions) { retval = (-EINVAL); goto out; } if ((i = osst_int_ioctl(STp, &SRpnt, MTREW, 0)) < 0 /*|| (i = partition_tape(inode, mtc.mt_count)) < 0*/) { retval = i; goto out; } for (i=0; i < ST_NBR_PARTITIONS; i++) { STp->ps[i].rw = ST_IDLE; STp->ps[i].at_sm = 0; STp->ps[i].last_block_valid = FALSE; } STp->partition = STp->new_partition = 0; STp->nbr_partitions = 1; /* Bad guess ?-) */ STps->drv_block = STps->drv_file = 0; retval = 0; goto out; } if (mtc.mt_op == MTSEEK) { if (STp->raw) i = osst_set_frame_position(STp, &SRpnt, mtc.mt_count, 0); else i = osst_seek_sector(STp, &SRpnt, mtc.mt_count); if (!STp->can_partitions) STp->ps[0].rw = ST_IDLE; retval = i; goto out; } /* if (STp->can_partitions && STp->ready == ST_READY && (i = update_partition(inode)) < 0) {retval=i;goto out;}*/ if (mtc.mt_op == MTCOMPRESSION) retval = -EINVAL /*osst_compression(STp, (mtc.mt_count & 1))*/; else retval = osst_int_ioctl(STp, &SRpnt, mtc.mt_op, mtc.mt_count); goto out; } if (!STm->defined) { retval = (-ENXIO); goto out; } if ((i = osst_flush_buffer(STp, &SRpnt, FALSE)) < 0) { retval = i; goto out; } /* if (STp->can_partitions && (i = update_partition(inode)) < 0) {retval=i;goto out;}*/ if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) { struct mtget mt_status; if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) { retval = (-EINVAL); goto out; } mt_status.mt_type = MT_ISONSTREAM_SC; mt_status.mt_erreg = STp->recover_erreg << MT_ST_SOFTERR_SHIFT; mt_status.mt_dsreg = ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) | ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK); mt_status.mt_blkno = STps->drv_block; mt_status.mt_fileno = STps->drv_file; if (STp->block_size != 0) { if (STps->rw == ST_WRITING) mt_status.mt_blkno += (STp->buffer)->buffer_bytes / STp->block_size; else if (STps->rw == ST_READING) mt_status.mt_blkno -= ((STp->buffer)->buffer_bytes + STp->block_size - 1) / STp->block_size; } mt_status.mt_gstat = 0; if (STp->drv_write_prot) mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff); if (mt_status.mt_blkno == 0) { if (mt_status.mt_fileno == 0) mt_status.mt_gstat |= GMT_BOT(0xffffffff); else mt_status.mt_gstat |= GMT_EOF(0xffffffff); } mt_status.mt_resid = STp->partition; if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR) mt_status.mt_gstat |= GMT_EOT(0xffffffff); else if (STps->eof >= ST_EOM_OK) mt_status.mt_gstat |= GMT_EOD(0xffffffff); if (STp->density == 1) mt_status.mt_gstat |= GMT_D_800(0xffffffff); else if (STp->density == 2) mt_status.mt_gstat |= GMT_D_1600(0xffffffff); else if (STp->density == 3) mt_status.mt_gstat |= GMT_D_6250(0xffffffff); if (STp->ready == ST_READY) mt_status.mt_gstat |= GMT_ONLINE(0xffffffff); if (STp->ready == ST_NO_TAPE) mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff); if (STps->at_sm) mt_status.mt_gstat |= GMT_SM(0xffffffff); if (STm->do_async_writes || (STm->do_buffer_writes && STp->block_size != 0) || STp->drv_buffer != 0) mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff); i = copy_to_user((char *)arg, (char *)&mt_status, sizeof(struct mtget)); if (i) { retval = (-EFAULT); goto out; } STp->recover_erreg = 0; /* Clear after read */ retval = 0; goto out; } /* End of MTIOCGET */ if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) { struct mtpos mt_pos; if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) { retval = (-EINVAL); goto out; } if (STp->raw) blk = osst_get_frame_position(STp, &SRpnt); else blk = osst_get_sector(STp, &SRpnt); if (blk < 0) { retval = blk; goto out; } mt_pos.mt_blkno = blk; i = copy_to_user((char *)arg, (char *) (&mt_pos), sizeof(struct mtpos)); if (i) retval = -EFAULT; goto out; } if (SRpnt) scsi_release_request(SRpnt); up(&STp->lock); return scsi_ioctl(STp->device, cmd_in, (void *) arg); out: if (SRpnt) scsi_release_request(SRpnt); up(&STp->lock); return retval; } /* Memory handling routines */ /* Try to allocate a new tape buffer */ static OSST_buffer * new_tape_buffer( int from_initialization, int need_dma ) { int i, priority, b_size, order, got = 0, segs = 0; OSST_buffer *tb; if (osst_nbr_buffers >= osst_template.dev_max) return NULL; /* Should never happen */ if (from_initialization) priority = GFP_ATOMIC; else priority = GFP_KERNEL; i = sizeof(OSST_buffer) + (osst_max_sg_segs - 1) * sizeof(struct scatterlist); tb = (OSST_buffer *)kmalloc(i, priority); if (tb) { // tb->this_size = i; if (need_dma) priority |= GFP_DMA; /* Try to allocate the first segment up to OSST_FIRST_ORDER and the others big enough to reach the goal */ for (b_size = PAGE_SIZE, order = 0; b_size < osst_buffer_size && order < OSST_FIRST_ORDER; b_size *= 2, order++ ); for ( ; b_size >= PAGE_SIZE; order--, b_size /= 2) { tb->sg[0].address = (unsigned char *)__get_free_pages(priority, order); if (tb->sg[0].address != NULL) { tb->sg[0].page = NULL; tb->sg[0].length = b_size; break; } } if (tb->sg[segs].address == NULL) { kfree(tb); tb = NULL; } else { /* Got something, continue */ for (b_size = PAGE_SIZE, order = 0; osst_buffer_size > tb->sg[0].length + (OSST_FIRST_SG - 1) * b_size; b_size *= 2, order++ ); for (segs=1, got=tb->sg[0].length; got < osst_buffer_size && segs < OSST_FIRST_SG; ) { tb->sg[segs].address = (unsigned char *)__get_free_pages(priority, order); if (tb->sg[segs].address == NULL) { if (osst_buffer_size - got <= (OSST_FIRST_SG - segs) * b_size / 2) { b_size /= 2; /* Large enough for the rest of the buffers */ order--; continue; } tb->sg_segs = segs; tb->orig_sg_segs = 0; #if DEBUG tb->buffer_size = got; #endif normalize_buffer(tb); kfree(tb); tb = NULL; break; } tb->sg[segs].page = NULL; tb->sg[segs].length = b_size; got += b_size; segs++; } } } if (!tb) { printk(KERN_NOTICE "osst :I: Can't allocate new tape buffer (nbr %d).\n", osst_nbr_buffers); return NULL; } tb->sg_segs = tb->orig_sg_segs = segs; tb->b_data = tb->sg[0].address; #if DEBUG if (debugging) { printk(OSST_DEB_MSG "osst :D: Allocated tape buffer %d (%d bytes, %d segments, dma: %d, a: %p).\n", osst_nbr_buffers, got, tb->sg_segs, need_dma, tb->b_data); printk(OSST_DEB_MSG "osst :D: segment sizes: first %d, last %d bytes.\n", tb->sg[0].length, tb->sg[segs-1].length); } #endif tb->in_use = 0; tb->dma = need_dma; tb->buffer_size = got; tb->writing = 0; osst_buffers[osst_nbr_buffers++] = tb; return tb; } /* Try to allocate a temporary enlarged tape buffer */ static int enlarge_buffer(OSST_buffer *STbuffer, int new_size, int need_dma) { int segs, nbr, max_segs, b_size, priority, order, got; normalize_buffer(STbuffer); max_segs = STbuffer->use_sg; if (max_segs > osst_max_sg_segs) max_segs = osst_max_sg_segs; nbr = max_segs - STbuffer->sg_segs; if (nbr <= 0) return FALSE; priority = GFP_KERNEL; if (need_dma) priority |= GFP_DMA; for (b_size = PAGE_SIZE, order = 0; b_size * nbr < new_size - STbuffer->buffer_size; b_size *= 2, order++); for (segs=STbuffer->sg_segs, got=STbuffer->buffer_size; segs < max_segs && got < new_size; ) { STbuffer->sg[segs].address = (unsigned char *)__get_free_pages(priority, order); if (STbuffer->sg[segs].address == NULL) { if (new_size - got <= (max_segs - segs) * b_size / 2) { b_size /= 2; /* Large enough for the rest of the buffers */ order--; continue; } printk(KERN_WARNING "osst :W: Failed to enlarge buffer to %d bytes.\n", new_size); #if DEBUG STbuffer->buffer_size = got; #endif normalize_buffer(STbuffer); return FALSE; } STbuffer->sg[segs].page = NULL; STbuffer->sg[segs].length = b_size; STbuffer->sg_segs += 1; got += b_size; STbuffer->buffer_size = got; segs++; } #if DEBUG if (debugging) { for (nbr=0; osst_buffers[nbr] != STbuffer && nbr < osst_nbr_buffers; nbr++); printk(OSST_DEB_MSG "osst :D: Expanded tape buffer %d (%d bytes, %d->%d segments, dma: %d, a: %p).\n", nbr, got, STbuffer->orig_sg_segs, STbuffer->sg_segs, need_dma, STbuffer->b_data); printk(OSST_DEB_MSG "osst :D: segment sizes: first %d, last %d bytes.\n", STbuffer->sg[0].length, STbuffer->sg[segs-1].length); } #endif return TRUE; } /* Release the extra buffer */ static void normalize_buffer(OSST_buffer *STbuffer) { int i, order, b_size; for (i=STbuffer->orig_sg_segs; i < STbuffer->sg_segs; i++) { for (b_size = PAGE_SIZE, order = 0; b_size < STbuffer->sg[i].length; b_size *= 2, order++); free_pages((unsigned long)STbuffer->sg[i].address, order); STbuffer->buffer_size -= STbuffer->sg[i].length; } #if DEBUG if (debugging && STbuffer->orig_sg_segs < STbuffer->sg_segs) printk(OSST_DEB_MSG "osst :D: Buffer at %p normalized to %d bytes (segs %d).\n", STbuffer->b_data, STbuffer->buffer_size, STbuffer->sg_segs); #endif STbuffer->sg_segs = STbuffer->orig_sg_segs; } /* Move data from the user buffer to the tape buffer. Returns zero (success) or negative error code. */ static int append_to_buffer(const char *ubp, OSST_buffer *st_bp, int do_count) { int i, cnt, res, offset; for (i=0, offset=st_bp->buffer_bytes; i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) offset -= st_bp->sg[i].length; if (i == st_bp->sg_segs) { /* Should never happen */ printk(KERN_WARNING "osst :A: Append_to_buffer offset overflow.\n"); return (-EIO); } for ( ; i < st_bp->sg_segs && do_count > 0; i++) { cnt = st_bp->sg[i].length - offset < do_count ? st_bp->sg[i].length - offset : do_count; res = copy_from_user(st_bp->sg[i].address + offset, ubp, cnt); if (res) return (-EFAULT); do_count -= cnt; st_bp->buffer_bytes += cnt; ubp += cnt; offset = 0; } if (do_count) { /* Should never happen */ printk(KERN_WARNING "osst :A: Append_to_buffer overflow (left %d).\n", do_count); return (-EIO); } return 0; } /* Move data from the tape buffer to the user buffer. Returns zero (success) or negative error code. */ static int from_buffer(OSST_buffer *st_bp, char *ubp, int do_count) { int i, cnt, res, offset; for (i=0, offset=st_bp->read_pointer; i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) offset -= st_bp->sg[i].length; if (i == st_bp->sg_segs) { /* Should never happen */ printk(KERN_WARNING "osst :A: From_buffer offset overflow.\n"); return (-EIO); } for ( ; i < st_bp->sg_segs && do_count > 0; i++) { cnt = st_bp->sg[i].length - offset < do_count ? st_bp->sg[i].length - offset : do_count; res = copy_to_user(ubp, st_bp->sg[i].address + offset, cnt); if (res) return (-EFAULT); do_count -= cnt; st_bp->buffer_bytes -= cnt; st_bp->read_pointer += cnt; ubp += cnt; offset = 0; } if (do_count) { /* Should never happen */ printk(KERN_WARNING "osst :A: From_buffer overflow (left %d).\n", do_count); return (-EIO); } return 0; } /* Sets the tail of the buffer after fill point to zero. Returns zero (success) or negative error code. */ static int osst_zero_buffer_tail(OSST_buffer *st_bp) { int i, offset, do_count, cnt; for (i = 0, offset = st_bp->buffer_bytes; i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) offset -= st_bp->sg[i].length; if (i == st_bp->sg_segs) { /* Should never happen */ printk(KERN_WARNING "osst :A: Zero_buffer offset overflow.\n"); return (-EIO); } for (do_count = OS_DATA_SIZE - st_bp->buffer_bytes; i < st_bp->sg_segs && do_count > 0; i++) { cnt = st_bp->sg[i].length - offset < do_count ? st_bp->sg[i].length - offset : do_count ; memset(st_bp->sg[i].address + offset, 0, cnt); do_count -= cnt; offset = 0; } if (do_count) { /* Should never happen */ printk(KERN_WARNING "osst :A: Zero_buffer overflow (left %d).\n", do_count); return (-EIO); } return 0; } /* Copy a osst 32K chunk of memory into the buffer. Returns zero (success) or negative error code. */ static int osst_copy_to_buffer(OSST_buffer *st_bp, unsigned char *ptr) { int i, cnt, do_count = OS_DATA_SIZE; for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) { cnt = st_bp->sg[i].length < do_count ? st_bp->sg[i].length : do_count ; memcpy(st_bp->sg[i].address, ptr, cnt); do_count -= cnt; ptr += cnt; } if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */ printk(KERN_WARNING "osst :A: Copy_to_buffer overflow (left %d at sg %d).\n", do_count, i); return (-EIO); } return 0; } /* Copy a osst 32K chunk of memory from the buffer. Returns zero (success) or negative error code. */ static int osst_copy_from_buffer(OSST_buffer *st_bp, unsigned char *ptr) { int i, cnt, do_count = OS_DATA_SIZE; for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) { cnt = st_bp->sg[i].length < do_count ? st_bp->sg[i].length : do_count ; memcpy(ptr, st_bp->sg[i].address, cnt); do_count -= cnt; ptr += cnt; } if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */ printk(KERN_WARNING "osst :A: Copy_from_buffer overflow (left %d at sg %d).\n", do_count, i); return (-EIO); } return 0; } /* Module housekeeping */ static void validate_options (void) { if (buffer_kbs > 0) osst_buffer_size = buffer_kbs * ST_KILOBYTE; if (write_threshold_kbs > 0) osst_write_threshold = write_threshold_kbs * ST_KILOBYTE; if (osst_write_threshold > osst_buffer_size) osst_write_threshold = osst_buffer_size; if (max_buffers > 0) osst_max_buffers = max_buffers; if (max_sg_segs >= OSST_FIRST_SG) osst_max_sg_segs = max_sg_segs; #if DEBUG printk(OSST_DEB_MSG "osst :D: bufsize %d, wrt %d, max buffers %d, s/g segs %d.\n", osst_buffer_size, osst_write_threshold, osst_max_buffers, osst_max_sg_segs); //printk(OSST_DEB_MSG "osst :D: sizeof(header) = %d (%s)\n", // sizeof(os_header_t),sizeof(os_header_t)==OS_DATA_SIZE?"ok":"error"); #endif } #ifndef MODULE /* Set the boot options. Syntax: osst=xxx,yyy,... where xxx is buffer size in 1024 byte blocks and yyy is write threshold in 1024 byte blocks. */ static int __init osst_setup (char *str) { int i, ints[5]; char *stp; stp = get_options(str, ARRAY_SIZE(ints), ints); if (ints[0] > 0) { for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++) *parms[i].val = ints[i + 1]; } else { while (stp != NULL) { for (i = 0; i < ARRAY_SIZE(parms); i++) { int len = strlen(parms[i].name); if (!strncmp(stp, parms[i].name, len) && (*(stp + len) == ':' || *(stp + len) == '=')) { *parms[i].val = simple_strtoul(stp + len + 1, NULL, 0); break; } } if (i >= sizeof(parms) / sizeof(struct osst_dev_parm)) printk(KERN_INFO "osst :I: Illegal parameter in '%s'\n", stp); stp = strchr(stp, ','); if (stp) stp++; } } return 1; } __setup("osst=", osst_setup); #endif static struct file_operations osst_fops = { read: osst_read, write: osst_write, ioctl: osst_ioctl, open: os_scsi_tape_open, flush: os_scsi_tape_flush, release: os_scsi_tape_close, }; static int osst_supports(Scsi_Device * SDp) { struct osst_support_data { char *vendor; char *model; char *rev; char *driver_hint; /* Name of the correct driver, NULL if unknown */ }; static struct osst_support_data support_list[] = { /* {"XXX", "Yy-", "", NULL}, example */ SIGS_FROM_OSST, {NULL, }}; struct osst_support_data *rp; /* We are willing to drive OnStream SC-x0 as well as the * * IDE, ParPort, FireWire, USB variants, if accessible by * * emulation layer (ide-scsi, usb-storage, ...) */ for (rp=&(support_list[0]); rp->vendor != NULL; rp++) if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) && !strncmp(rp->model, SDp->model, strlen(rp->model)) && !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) return 1; return 0; } static int osst_attach(Scsi_Device * SDp) { OS_Scsi_Tape * tpnt; ST_mode * STm; ST_partstat * STps; int i, dev; #ifdef CONFIG_DEVFS_FS int mode; #endif if (SDp->type != TYPE_TAPE || !osst_supports(SDp)) return 1; if (osst_template.nr_dev >= osst_template.dev_max) { SDp->attached--; return 1; } /* find a free minor number */ for (i=0; os_scsi_tapes[i] && i= osst_template.dev_max) panic ("Scsi_devices corrupt (osst)"); /* allocate a OS_Scsi_Tape for this device */ tpnt = (OS_Scsi_Tape *)kmalloc(sizeof(OS_Scsi_Tape), GFP_ATOMIC); if (tpnt == NULL) { SDp->attached--; printk(KERN_WARNING "osst :W: Can't allocate device descriptor.\n"); return 1; } memset(tpnt, 0, sizeof(OS_Scsi_Tape)); os_scsi_tapes[i] = tpnt; dev = i; tpnt->capacity = 0xfffff; /* allocate a buffer for this device */ if (!new_tape_buffer(TRUE, TRUE)) printk(KERN_ERR "osst :W: Unable to allocate a tape buffer.\n"); #ifdef CONFIG_DEVFS_FS for (mode = 0; mode < ST_NBR_MODES; ++mode) { char name[8]; static char *formats[ST_NBR_MODES] ={"", "l", "m", "a"}; /* Rewind entry */ sprintf (name, "mt%s", formats[mode]); # if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0) tpnt->de_r[mode] = devfs_register (SDp->de, name, DEVFS_FL_DEFAULT, MAJOR_NR, i + (mode << 5), S_IFCHR | S_IRUGO | S_IWUGO, &osst_fops, NULL); # else tpnt->de_r[mode] = devfs_register (SDp->de, name, 0, DEVFS_FL_DEFAULT, MAJOR_NR, i + (mode << 5), S_IFCHR | S_IRUGO | S_IWUGO, 0, 0, &osst_fops, NULL); # endif /* No-rewind entry */ sprintf (name, "mt%sn", formats[mode]); # if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0) tpnt->de_n[mode] = devfs_register (SDp->de, name, DEVFS_FL_DEFAULT, MAJOR_NR, i + (mode << 5) + 128, S_IFCHR | S_IRUGO | S_IWUGO, &osst_fops, NULL); # else tpnt->de_n[mode] = devfs_register (SDp->de, name, 0, DEVFS_FL_DEFAULT, MAJOR_NR, i + (mode << 5) + 128, S_IFCHR | S_IRUGO | S_IWUGO, 0, 0, &osst_fops, NULL); # endif } devfs_register_tape (tpnt->de_r[0]); #endif tpnt->device = SDp; tpnt->devt = MKDEV(MAJOR_NR, i); tpnt->dirty = 0; tpnt->in_use = 0; tpnt->drv_buffer = 1; /* Try buffering if no mode sense */ tpnt->restr_dma = (SDp->host)->unchecked_isa_dma; tpnt->density = 0; tpnt->do_auto_lock = OSST_AUTO_LOCK; tpnt->can_bsr = OSST_IN_FILE_POS; tpnt->can_partitions = 0; tpnt->two_fm = OSST_TWO_FM; tpnt->fast_mteom = OSST_FAST_MTEOM; tpnt->scsi2_logical = OSST_SCSI2LOGICAL; /* FIXME */ tpnt->write_threshold = osst_write_threshold; tpnt->default_drvbuffer = 0xff; /* No forced buffering */ tpnt->partition = 0; tpnt->new_partition = 0; tpnt->nbr_partitions = 0; tpnt->min_block = 512; tpnt->max_block = OS_DATA_SIZE; tpnt->timeout = OSST_TIMEOUT; tpnt->long_timeout = OSST_LONG_TIMEOUT; /* Recognize OnStream tapes */ /* We don't need to test for OnStream, as this has been done in detect () */ tpnt->os_fw_rev = osst_parse_firmware_rev (SDp->rev); tpnt->omit_blklims = 1; tpnt->poll = (strncmp(SDp->model, "DI-", 3) == 0) || OSST_FW_NEED_POLL(tpnt->os_fw_rev,SDp); tpnt->frame_in_buffer = 0; tpnt->header_ok = 0; tpnt->linux_media = 0; tpnt->header_cache = NULL; for (i=0; i < ST_NBR_MODES; i++) { STm = &(tpnt->modes[i]); STm->defined = FALSE; STm->sysv = OSST_SYSV; STm->defaults_for_writes = 0; STm->do_async_writes = OSST_ASYNC_WRITES; STm->do_buffer_writes = OSST_BUFFER_WRITES; STm->do_read_ahead = OSST_READ_AHEAD; STm->default_compression = ST_DONT_TOUCH; STm->default_blksize = 512; STm->default_density = (-1); /* No forced density */ } for (i=0; i < ST_NBR_PARTITIONS; i++) { STps = &(tpnt->ps[i]); STps->rw = ST_IDLE; STps->eof = ST_NOEOF; STps->at_sm = 0; STps->last_block_valid = FALSE; STps->drv_block = (-1); STps->drv_file = (-1); } tpnt->current_mode = 0; tpnt->modes[0].defined = TRUE; tpnt->modes[2].defined = TRUE; tpnt->density_changed = tpnt->compression_changed = tpnt->blksize_changed = FALSE; init_MUTEX(&tpnt->lock); osst_template.nr_dev++; printk(KERN_INFO "osst :I: Attached OnStream %.5s tape at scsi%d, channel %d, id %d, lun %d as osst%d\n", SDp->model, SDp->host->host_no, SDp->channel, SDp->id, SDp->lun, dev); return 0; }; static int osst_detect(Scsi_Device * SDp) { if (SDp->type != TYPE_TAPE) return 0; if ( ! osst_supports(SDp) ) return 0; osst_template.dev_noticed++; return 1; } static int osst_registered = 0; /* Driver initialization (not __initfunc because may be called later) */ static int osst_init() { int i; if (osst_template.dev_noticed == 0) return 0; if(!osst_registered) { #ifdef CONFIG_DEVFS_FS if (devfs_register_chrdev(MAJOR_NR,"osst",&osst_fops)) { #else if (register_chrdev(MAJOR_NR,"osst",&osst_fops)) { #endif printk(KERN_ERR "osst :W: Unable to get major %d for OnStream tapes\n",MAJOR_NR); return 1; } osst_registered++; } if (os_scsi_tapes) return 0; osst_template.dev_max = OSST_MAX_TAPES; if (osst_template.dev_max > 128 / ST_NBR_MODES) printk(KERN_INFO "osst :I: Only %d tapes accessible.\n", 128 / ST_NBR_MODES); os_scsi_tapes = (OS_Scsi_Tape **)kmalloc(osst_template.dev_max * sizeof(OS_Scsi_Tape *), GFP_ATOMIC); if (os_scsi_tapes == NULL) { printk(KERN_ERR "osst :W: Unable to allocate array for OnStream SCSI tapes.\n"); #ifdef CONFIG_DEVFS_FS devfs_unregister_chrdev(MAJOR_NR, "osst"); #else unregister_chrdev(MAJOR_NR, "osst"); #endif return 1; } for (i=0; i < osst_template.dev_max; ++i) os_scsi_tapes[i] = NULL; /* Allocate the buffer pointers */ osst_buffers = (OSST_buffer **)kmalloc(osst_template.dev_max * sizeof(OSST_buffer *), GFP_ATOMIC); if (osst_buffers == NULL) { printk(KERN_ERR "osst :W: Unable to allocate tape buffer pointers.\n"); #ifdef CONFIG_DEVFS_FS devfs_unregister_chrdev(MAJOR_NR, "osst"); #else unregister_chrdev(MAJOR_NR, "osst"); #endif kfree(os_scsi_tapes); return 1; } osst_nbr_buffers = 0; printk(KERN_INFO "osst :I: Tape driver with OnStream support version %s\nosst :I: %s\n", osst_version, cvsid); #if DEBUG printk(OSST_DEB_MSG "osst :D: Buffer size %d bytes, write threshold %d bytes.\n", osst_buffer_size, osst_write_threshold); #endif return 0; } static void osst_detach(Scsi_Device * SDp) { OS_Scsi_Tape * tpnt; int i; #ifdef CONFIG_DEVFS_FS int mode; #endif for(i=0; idevice == SDp) { tpnt->device = NULL; #ifdef CONFIG_DEVFS_FS for (mode = 0; mode < ST_NBR_MODES; ++mode) { devfs_unregister (tpnt->de_r[mode]); tpnt->de_r[mode] = NULL; devfs_unregister (tpnt->de_n[mode]); tpnt->de_n[mode] = NULL; } #endif kfree(tpnt); os_scsi_tapes[i] = NULL; SDp->attached--; osst_template.nr_dev--; osst_template.dev_noticed--; return; } } return; } static int __init init_osst(void) { validate_options(); osst_template.module = THIS_MODULE; return scsi_register_module(MODULE_SCSI_DEV, &osst_template); } static void __exit exit_osst (void) { int i; OS_Scsi_Tape * STp; scsi_unregister_module(MODULE_SCSI_DEV, &osst_template); #ifdef CONFIG_DEVFS_FS devfs_unregister_chrdev(MAJOR_NR, "osst"); #else unregister_chrdev(MAJOR_NR, "osst"); #endif osst_registered--; if(os_scsi_tapes != NULL) { for (i=0; i < osst_template.dev_max; ++i) { if ((STp = os_scsi_tapes[i])) { if (STp->header_cache != NULL) vfree(STp->header_cache); kfree(STp); } } kfree(os_scsi_tapes); if (osst_buffers != NULL) { for (i=0; i < osst_nbr_buffers; i++) if (osst_buffers[i] != NULL) { osst_buffers[i]->orig_sg_segs = 0; normalize_buffer(osst_buffers[i]); kfree(osst_buffers[i]); } kfree(osst_buffers); } } osst_template.dev_max = 0; printk(KERN_INFO "osst :I: Unloaded.\n"); } module_init(init_osst); module_exit(exit_osst);