/* Driver for USB Mass Storage compliant devices * Debugging Functions Source Code File * * $Id: debug.c,v 1.5 2001/06/27 23:20:45 mdharm Exp $ * * Current development and maintenance by: * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) * * Initial work by: * (c) 1999 Michael Gee (michael@linuxspecific.com) * * This driver is based on the 'USB Mass Storage Class' document. This * describes in detail the protocol used to communicate with such * devices. Clearly, the designers had SCSI and ATAPI commands in * mind when they created this document. The commands are all very * similar to commands in the SCSI-II and ATAPI specifications. * * It is important to note that in a number of cases this class * exhibits class-specific exemptions from the USB specification. * Notably the usage of NAK, STALL and ACK differs from the norm, in * that they are used to communicate wait, failed and OK on commands. * * Also, for certain devices, the interrupt endpoint is used to convey * status of a command. * * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more * information about this driver. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "debug.h" void usb_stor_show_command(Scsi_Cmnd *srb) { char *what = NULL; switch (srb->cmnd[0]) { case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break; case REZERO_UNIT: what = "REZERO_UNIT"; break; case REQUEST_SENSE: what = "REQUEST_SENSE"; break; case FORMAT_UNIT: what = "FORMAT_UNIT"; break; case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break; case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break; case READ_6: what = "READ_6"; break; case WRITE_6: what = "WRITE_6"; break; case SEEK_6: what = "SEEK_6"; break; case READ_REVERSE: what = "READ_REVERSE"; break; case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break; case SPACE: what = "SPACE"; break; case INQUIRY: what = "INQUIRY"; break; case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break; case MODE_SELECT: what = "MODE_SELECT"; break; case RESERVE: what = "RESERVE"; break; case RELEASE: what = "RELEASE"; break; case COPY: what = "COPY"; break; case ERASE: what = "ERASE"; break; case MODE_SENSE: what = "MODE_SENSE"; break; case START_STOP: what = "START_STOP"; break; case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break; case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break; case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break; case SET_WINDOW: what = "SET_WINDOW"; break; case READ_CAPACITY: what = "READ_CAPACITY"; break; case READ_10: what = "READ_10"; break; case WRITE_10: what = "WRITE_10"; break; case SEEK_10: what = "SEEK_10"; break; case WRITE_VERIFY: what = "WRITE_VERIFY"; break; case VERIFY: what = "VERIFY"; break; case SEARCH_HIGH: what = "SEARCH_HIGH"; break; case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break; case SEARCH_LOW: what = "SEARCH_LOW"; break; case SET_LIMITS: what = "SET_LIMITS"; break; case READ_POSITION: what = "READ_POSITION"; break; case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break; case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break; case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break; case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break; case COMPARE: what = "COMPARE"; break; case COPY_VERIFY: what = "COPY_VERIFY"; break; case WRITE_BUFFER: what = "WRITE_BUFFER"; break; case READ_BUFFER: what = "READ_BUFFER"; break; case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break; case READ_LONG: what = "READ_LONG"; break; case WRITE_LONG: what = "WRITE_LONG"; break; case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break; case WRITE_SAME: what = "WRITE_SAME"; break; case GPCMD_READ_SUBCHANNEL: what = "READ SUBCHANNEL"; break; case READ_TOC: what = "READ_TOC"; break; case GPCMD_READ_HEADER: what = "READ HEADER"; break; case GPCMD_PLAY_AUDIO_10: what = "PLAY AUDIO (10)"; break; case GPCMD_PLAY_AUDIO_MSF: what = "PLAY AUDIO MSF"; break; case GPCMD_GET_EVENT_STATUS_NOTIFICATION: what = "GET EVENT/STATUS NOTIFICATION"; break; case GPCMD_PAUSE_RESUME: what = "PAUSE/RESUME"; break; case LOG_SELECT: what = "LOG_SELECT"; break; case LOG_SENSE: what = "LOG_SENSE"; break; case GPCMD_STOP_PLAY_SCAN: what = "STOP PLAY/SCAN"; break; case GPCMD_READ_DISC_INFO: what = "READ DISC INFORMATION"; break; case GPCMD_READ_TRACK_RZONE_INFO: what = "READ TRACK INFORMATION"; break; case GPCMD_RESERVE_RZONE_TRACK: what = "RESERVE TRACK"; break; case GPCMD_SEND_OPC: what = "SEND OPC"; break; case MODE_SELECT_10: what = "MODE_SELECT_10"; break; case GPCMD_REPAIR_RZONE_TRACK: what = "REPAIR TRACK"; break; case 0x59: what = "READ MASTER CUE"; break; case MODE_SENSE_10: what = "MODE_SENSE_10"; break; case GPCMD_CLOSE_TRACK: what = "CLOSE TRACK/SESSION"; break; case 0x5C: what = "READ BUFFER CAPACITY"; break; case 0x5D: what = "SEND CUE SHEET"; break; case GPCMD_BLANK: what = "BLANK"; break; case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break; case READ_12: what = "READ_12"; break; case WRITE_12: what = "WRITE_12"; break; case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break; case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break; case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break; case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break; case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break; case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break; case GPCMD_READ_CD_MSF: what = "READ CD MSF"; break; case GPCMD_SCAN: what = "SCAN"; break; case GPCMD_SET_SPEED: what = "SET CD SPEED"; break; case GPCMD_MECHANISM_STATUS: what = "MECHANISM STATUS"; break; case GPCMD_READ_CD: what = "READ CD"; break; case 0xE1: what = "WRITE CONTINUE"; break; case WRITE_LONG_2: what = "WRITE_LONG_2"; break; default: what = "(unknown command)"; break; } US_DEBUGP("Command %s (%d bytes)\n", what, srb->cmd_len); US_DEBUGP("%02x %02x %02x %02x " "%02x %02x %02x %02x " "%02x %02x %02x %02x\n", srb->cmnd[0], srb->cmnd[1], srb->cmnd[2], srb->cmnd[3], srb->cmnd[4], srb->cmnd[5], srb->cmnd[6], srb->cmnd[7], srb->cmnd[8], srb->cmnd[9], srb->cmnd[10], srb->cmnd[11]); } void usb_stor_print_Scsi_Cmnd( Scsi_Cmnd* cmd ) { int i=0, bufferSize = cmd->request_bufflen; u8* buffer = cmd->request_buffer; struct scatterlist* sg = (struct scatterlist*)cmd->request_buffer; US_DEBUGP("Dumping information about %p.\n", cmd ); US_DEBUGP("cmd->cmnd[0] value is %d.\n", cmd->cmnd[0] ); US_DEBUGP("(MODE_SENSE is %d and MODE_SENSE_10 is %d)\n", MODE_SENSE, MODE_SENSE_10 ); US_DEBUGP("buffer is %p with length %d.\n", buffer, bufferSize ); for ( i=0; iuse_sg ); for ( i=0; iuse_sg; i++ ) { US_DEBUGP("Length of scatterlist %d is %d.\n",i,sg[i].length); US_DEBUGP("%02x %02x %02x %02x %02x %02x %02x %02x\n" "%02x %02x %02x %02x %02x %02x %02x %02x\n", sg[i].address[0], sg[i].address[1], sg[i].address[2], sg[i].address[3], sg[i].address[4], sg[i].address[5], sg[i].address[6], sg[i].address[7], sg[i].address[8], sg[i].address[9], sg[i].address[10], sg[i].address[11], sg[i].address[12], sg[i].address[13], sg[i].address[14], sg[i].address[15]); } } void usb_stor_show_sense( unsigned char key, unsigned char asc, unsigned char ascq) { char *keys[] = { "No Sense", "Recovered Error", "Not Ready", "Medium Error", "Hardware Error", "Illegal Request", "Unit Attention", "Data Protect", "Blank Check", "Vendor Specific", "Copy Aborted", "Aborted Command", "(Obsolete)", "Volume Overflow", "Miscompare" }; unsigned short qual = asc; char *what = 0; char *keystr = 0; qual <<= 8; qual |= ascq; if (key>0x0E) keystr = "(Unknown Key)"; else keystr = keys[key]; switch (qual) { case 0x0000: what="no additional sense information"; break; case 0x0001: what="filemark detected"; break; case 0x0002: what="end of partition/medium detected"; break; case 0x0003: what="setmark detected"; break; case 0x0004: what="beginning of partition/medium detected"; break; case 0x0005: what="end of data detected"; break; case 0x0006: what="I/O process terminated"; break; case 0x0011: what="audio play operation in progress"; break; case 0x0012: what="audio play operation paused"; break; case 0x0013: what="audio play operation stopped due to error"; break; case 0x0014: what="audio play operation successfully completed"; break; case 0x0015: what="no current audio status to return"; break; case 0x0016: what="operation in progress"; break; case 0x0017: what="cleaning requested"; break; case 0x0100: what="no index/sector signal"; break; case 0x0200: what="no seek complete"; break; case 0x0300: what="peripheral device write fault"; break; case 0x0301: what="no write current"; break; case 0x0302: what="excessive write errors"; break; case 0x0400: what="LUN not ready, cause not reportable"; break; case 0x0401: what="LUN in process of becoming ready"; break; case 0x0402: what="LUN not ready, initializing cmd. required"; break; case 0x0403: what="LUN not ready, manual intervention required"; break; case 0x0404: what="LUN not ready, format in progress"; break; case 0x0405: what="LUN not ready, rebuild in progress"; break; case 0x0406: what="LUN not ready, recalculation in progress"; break; case 0x0407: what="LUN not ready, operation in progress"; break; case 0x0408: what="LUN not ready, long write in progress"; break; case 0x0500: what="LUN doesn't respond to selection"; break; case 0x0A00: what="error log overflow"; break; case 0x0C04: what="compression check miscompare error"; break; case 0x0C05: what="data expansion occurred during compression"; break; case 0x0C06: what="block not compressible"; break; case 0x1102: what="error too long to correct"; break; case 0x1106: what="CIRC unrecovered error"; break; case 0x1107: what="data resynchronization error"; break; case 0x110D: what="decompression CRC error"; break; case 0x110E: what="can't decompress using declared algorithm"; break; case 0x110F: what="error reading UPC/EAN number"; break; case 0x1110: what="error reading ISRC number"; break; case 0x1200: what="address mark not found for ID field"; break; case 0x1300: what="address mark not found for data field"; break; case 0x1403: what="end of data not found"; break; case 0x1404: what="block sequence error"; break; case 0x1600: what="data sync mark error"; break; case 0x1601: what="data sync error: data rewritten"; break; case 0x1602: what="data sync error: recommend rewrite"; break; case 0x1603: what="data sync error: data auto-reallocated"; break; case 0x1604: what="data sync error: recommend reassignment"; break; case 0x1900: what="defect list error"; break; case 0x1901: what="defect list not available"; break; case 0x1902: what="defect list error in primary list"; break; case 0x1903: what="defect list error in grown list"; break; case 0x1C00: what="defect list not found"; break; case 0x2400: what="invalid field in CDB"; break; case 0x2703: what="associated write protect"; break; case 0x2800: what="not ready to ready transition"; break; case 0x2903: what="bus device reset function occurred"; break; case 0x2904: what="device internal reset"; break; case 0x2B00: what="copy can't execute / host can't disconnect"; break; case 0x2C00: what="command sequence error"; break; case 0x2C03: what="current program area is not empty"; break; case 0x2C04: what="current program area is empty"; break; case 0x2F00: what="commands cleared by another initiator"; break; case 0x3001: what="can't read medium: unknown format"; break; case 0x3002: what="can't read medium: incompatible format"; break; case 0x3003: what="cleaning cartridge installed"; break; case 0x3004: what="can't write medium: unknown format"; break; case 0x3005: what="can't write medium: incompatible format"; break; case 0x3006: what="can't format medium: incompatible medium"; break; case 0x3007: what="cleaning failure"; break; case 0x3008: what="can't write: application code mismatch"; break; case 0x3009: what="current session not fixated for append"; break; case 0x3201: what="defect list update failure"; break; case 0x3400: what="enclosure failure"; break; case 0x3500: what="enclosure services failure"; break; case 0x3502: what="enclosure services unavailable"; break; case 0x3503: what="enclosure services transfer failure"; break; case 0x3504: what="enclosure services transfer refused"; break; case 0x3B0F: what="end of medium reached"; break; case 0x3F02: what="changed operating definition"; break; case 0x4100: what="data path failure (should use 40 NN)"; break; case 0x4A00: what="command phase error"; break; case 0x4B00: what="data phase error"; break; case 0x5100: what="erase failure"; break; case 0x5200: what="cartridge fault"; break; case 0x6300: what="end of user area encountered on this track"; break; case 0x6600: what="automatic document feeder cover up"; break; case 0x6601: what="automatic document feeder lift up"; break; case 0x6602: what="document jam in auto doc feeder"; break; case 0x6603: what="document miss feed auto in doc feeder"; break; case 0x6700: what="configuration failure"; break; case 0x6701: what="configuration of incapable LUN's failed"; break; case 0x6702: what="add logical unit failed"; break; case 0x6706: what="attachment of logical unit failed"; break; case 0x6707: what="creation of logical unit failed"; break; case 0x6900: what="data loss on logical unit"; break; case 0x6E00: what="command to logical unit failed"; break; case 0x7100: what="decompression exception long algorithm ID"; break; case 0x7204: what="empty or partially written reserved track"; break; case 0x7300: what="CD control error"; break; default: if (asc==0x40) { US_DEBUGP("%s: diagnostic failure on component" " %02X\n", keystr, ascq); return; } if (asc==0x70) { US_DEBUGP("%s: decompression exception short" " algorithm ID of %02X\n", keystr, ascq); return; } what = "(unknown ASC/ASCQ)"; } US_DEBUGP("%s: %s\n", keystr, what); }