/* $Id$ * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Derived from IRIX . * * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. * Copyright (C) 1999 by Ralf Baechle */ #ifndef _ASM_SN_KLCONFIG_H #define _ASM_SN_KLCONFIG_H #include /* * klconfig.h */ /* * The KLCONFIG structures store info about the various BOARDs found * during Hardware Discovery. In addition, it stores info about the * components found on the BOARDs. */ /* * WARNING: * Certain assembly language routines (notably xxxxx.s) in the IP27PROM * will depend on the format of the data structures in this file. In * most cases, rearranging the fields can seriously break things. * Adding fields in the beginning or middle can also break things. * Add fields if necessary, to the end of a struct in such a way * that offsets of existing fields do not change. */ #include #include #include #include #if defined(CONFIG_SGI_IP35) || defined(CONFIG_IA64_SGI_SN1) || defined(CONFIG_IA64_GENERIC) #include #include #include #include // #include // #include #include #include #include #include #include #endif /* CONFIG_SGI_IP35 ... */ #define KLCFGINFO_MAGIC 0xbeedbabe typedef s32 klconf_off_t; #define MAX_MODULE_ID 255 #define SIZE_PAD 4096 /* 4k padding for structures */ #if (defined(CONFIG_SGI_IP35) || defined(CONFIG_IA64_SGI_SN1) || defined(CONFIG_IA64_GENERIC)) && defined(BRINGUP) /* MAX_SLOTS_PER_NODE??? */ /* * 1 NODE brick, 3 Router bricks (1 local, 1 meta, 1 repeater), * 6 XIO Widgets, 1 Xbow, 1 gfx */ #define MAX_SLOTS_PER_NODE (1 + 3 + 6 + 1 + 1) #else /* * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets, * 2 Midplanes assuming no pci card cages */ #define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2) #endif /* XXX if each node is guranteed to have some memory */ #define MAX_PCI_DEVS 8 /* lboard_t->brd_flags fields */ /* All bits in this field are currently used. Try the pad fields if you need more flag bits */ #define ENABLE_BOARD 0x01 #define FAILED_BOARD 0x02 #define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which are discovered twice. Use one of them */ #define VISITED_BOARD 0x08 /* Used for compact hub numbering. */ #define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ #define GLOBAL_MASTER_IO6 0x20 #define GLOBAL_MASTER_EXT 0x40 /* extend master io6 to other bus on ibrick */ #define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ /* klinfo->flags fields */ #define KLINFO_ENABLE 0x01 /* This component is enabled */ #define KLINFO_FAILED 0x02 /* This component failed */ #define KLINFO_DEVICE 0x04 /* This component is a device */ #define KLINFO_VISITED 0x08 /* This component has been visited */ #define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ #define KLINFO_INSTALL 0x20 /* Install a driver */ #define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ #define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL) #define GB2 0x80000000 #define MAX_RSV_PTRS 32 /* Structures to manage various data storage areas */ /* The numbers must be contiguous since the array index i is used in the code to allocate various areas. */ #define BOARD_STRUCT 0 #define COMPONENT_STRUCT 1 #define ERRINFO_STRUCT 2 #define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) #define DEVICE_STRUCT 3 typedef struct console_s { __psunsigned_t uart_base; __psunsigned_t config_base; __psunsigned_t memory_base; short baud; short flag; int type; nasid_t nasid; char wid; char npci; nic_t baseio_nic; } console_t; typedef struct klc_malloc_hdr { klconf_off_t km_base; klconf_off_t km_limit; klconf_off_t km_current; } klc_malloc_hdr_t; /* Functions/macros needed to use this structure */ typedef struct kl_config_hdr { u64 ch_magic; /* set this to KLCFGINFO_MAGIC */ u32 ch_version; /* structure version number */ klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */ klconf_off_t ch_cons_off; /* offset of ch_cons */ klconf_off_t ch_board_info; /* the link list of boards */ console_t ch_cons_info; /* address info of the console */ klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX]; confidence_t ch_sw_belief; /* confidence that software is bad*/ confidence_t ch_sn0net_belief; /* confidence that sn0net is bad */ } kl_config_hdr_t; #define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) #define KL_CONFIG_INFO_OFFSET(_nasid) \ (KL_CONFIG_HDR(_nasid)->ch_board_info) #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \ (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) #ifndef __ia64 #define KL_CONFIG_INFO(_nasid) \ (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ NODE_OFFSET_TO_K0((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \ 0) #else #define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(NODE_CAC_BASE(nasid) + (off)) #define KL_CONFIG_INFO(_nasid) \ (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ NODE_OFFSET_TO_LBOARD((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \ NULL) #endif /* __ia64 */ #define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic) #define KL_CONFIG_CHECK_MAGIC(_nasid) \ (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) #define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \ (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) /* --- New Macros for the changed kl_config_hdr_t structure --- */ #define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ ((__psunsigned_t)_k + (_k->ch_malloc_hdr_off))) #define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) #define PTR_CH_CONS_INFO(_k) ((console_t *)\ ((__psunsigned_t)_k + (_k->ch_cons_off))) #define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n)) /* ------------------------------------------------------------- */ #define KL_CONFIG_INFO_START(_nasid) \ (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) #define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid) #define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off)) #define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) #define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) #define XBOW_PORT_TYPE_IO(_xbowp, _link) \ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) #define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) #define XBOW_PORT_NASID(_xbowp, _link) \ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) #define XBOW_PORT_IO 0x1 #define XBOW_PORT_HUB 0x2 #define XBOW_PORT_ENABLE 0x4 #define SN0_PORT_FENCE_SHFT 0 #define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) /* * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to * the LOCAL/current NODE. REMOTE means it is attached to a different * node.(TBD - Need a way to treat ROUTER boards.) * * There are 2 different structures to represent these boards - * lboard - Local board, rboard - remote board. These 2 structures * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer * Figure below). The first byte of the rboard or lboard structure * is used to find out its type - no unions are used. * If it is a lboard, then the config info of this board will be found * on the local node. (LOCAL NODE BASE + offset value gives pointer to * the structure. * If it is a rboard, the local structure contains the node number * and the offset of the beginning of the LINKED LIST on the remote node. * The details of the hardware on a remote node can be built locally, * if required, by reading the LINKED LIST on the remote node and * ignoring all the rboards on that node. * * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the * First board info on the remote node. The remote node list is * traversed as the local list, using the REMOTE BASE ADDRESS and not * the local base address and ignoring all rboard values. * * KLCONFIG +------------+ +------------+ +------------+ +------------+ | lboard | +-->| lboard | +-->| rboard | +-->| lboard | +------------+ | +------------+ | +------------+ | +------------+ | board info | | | board info | | |errinfo,bptr| | | board info | +------------+ | +------------+ | +------------+ | +------------+ | offset |--+ | offset |--+ | offset |--+ |offset=NULL | +------------+ +------------+ +------------+ +------------+ +------------+ | board info | +------------+ +--------------------------------+ | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) +------------+ +--------------------------------+ | compt 2 |--+ +------------+ | +--------------------------------+ | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) +------------+ +--------------------------------+ | errinfo |--+ +------------+ | +--------------------------------+ +--->|r/l brd errinfo,compt err flags | +--------------------------------+ * * Each BOARD consists of COMPONENTs and the BOARD structure has * pointers (offsets) to its COMPONENT structure. * The COMPONENT structure has version info, size and speed info, revision, * error info and the NIC info. This structure can accomodate any * BOARD with arbitrary COMPONENT composition. * * The ERRORINFO part of each BOARD has error information * that describes errors about the BOARD itself. It also has flags to * indicate the COMPONENT(s) on the board that have errors. The error * information specific to the COMPONENT is present in the respective * COMPONENT structure. * * The ERRORINFO structure is also treated like a COMPONENT, ie. the * BOARD has pointers(offset) to the ERRORINFO structure. The rboard * structure also has a pointer to the ERRORINFO structure. This is * the place to store ERRORINFO about a REMOTE NODE, if the HUB on * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info * which is present on the REMOTE NODE.(TBD) * REMOTE ERRINFO can be stored on any of the nearest nodes * or on all the nearest nodes.(TBD) * Like BOARD structures, REMOTE ERRINFO structures can be built locally * using the rboard errinfo pointer. * * In order to get useful information from this Data organization, a set of * interface routines are provided (TBD). The important thing to remember while * manipulating the structures, is that, the NODE number information should * be used. If the NODE is non-zero (remote) then each offset should * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. * This includes offsets for BOARDS, COMPONENTS and ERRORINFO. * * Note that these structures do not provide much info about connectivity. * That info will be part of HWGRAPH, which is an extension of the cfg_t * data structure. (ref IP27prom/cfg.h) It has to be extended to include * the IO part of the Network(TBD). * * The data structures below define the above concepts. */ /* * Values for CPU types */ #define KL_CPU_R4000 0x1 /* Standard R4000 */ #define KL_CPU_TFP 0x2 /* TFP processor */ #define KL_CPU_R10000 0x3 /* R10000 (T5) */ #define KL_CPU_NONE (-1) /* no cpu present in slot */ /* * IP27 BOARD classes */ #define KLCLASS_MASK 0xf0 #define KLCLASS_NONE 0x00 #define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ #define KLCLASS_CPU KLCLASS_NODE #define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI and the non-graphics widget boards */ #define KLCLASS_ROUTER 0x30 /* Router board */ #define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board so that we can record error info */ #define KLCLASS_GFX 0x50 /* graphics boards */ #define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx * hw ifc to xtalk and are not gfx * class for sw purposes */ #define KLCLASS_IOBRICK 0x70 /* IP35 iobrick */ #define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */ #define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */ #define KLCLASS_UNKNOWN 0xf0 #define KLCLASS(_x) ((_x) & KLCLASS_MASK) /* * IP27 board types */ #define KLTYPE_MASK 0x0f #define KLTYPE_NONE 0x00 #define KLTYPE_EMPTY 0x00 #define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0) #define KLTYPE_IP27 (KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */ #if defined(CONFIG_SGI_IP35) || defined(CONFIG_IA64_SGI_SN1) || defined(CONFIG_IA64_GENERIC) #define KLTYPE_IP35 KLTYPE_IP27 #define KLTYPE_IP37 KLTYPE_IP35 #endif #define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0) #define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */ #define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ #define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2) #define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ #define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) #define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ #define KLTYPE_FDDI (KLCLASS_IO | 0x4) #define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */ #define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ #define KLTYPE_PCI KLTYPE_HAROLD #define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ #define KLTYPE_MIO (KLCLASS_IO | 0x8) #define KLTYPE_FC (KLCLASS_IO | 0x9) #define KLTYPE_LINC (KLCLASS_IO | 0xA) #define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ #define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ #define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ #define KLTYPE_SHOEHORN (KLCLASS_IO | 0xE) #define KLTYPE_SERIAL_HIPPI (KLCLASS_IO | 0xF) #define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */ #define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */ #define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */ #define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0) #define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) #define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ #define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2) #define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) #define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4) #define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0) #define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */ #define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 #define KLTYPE_IOBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) #define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) #define KLTYPE_IBRICK (KLCLASS_IOBRICK | 0x1) #define KLTYPE_PBRICK (KLCLASS_IOBRICK | 0x2) #define KLTYPE_XBRICK (KLCLASS_IOBRICK | 0x3) #define KLTYPE_PBRICK_BRIDGE KLTYPE_PBRICK /* The value of type should be more than 8 so that hinv prints * out the board name from the NIC string. For values less than * 8 the name of the board needs to be hard coded in a few places. * When bringup started nic names had not standardized and so we * had to hard code. (For people interested in history.) */ #define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) #define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf) #define KLTYPE(_x) ((_x) & KLTYPE_MASK) #define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \ (l->brd_flags & SECOND_NIC_PRESENT)) #define IS_MIO_IOC3(l,n) (IS_MIO_PRESENT(l) && (n > 2)) /* * board structures */ #define MAX_COMPTS_PER_BRD 24 #define LOCAL_BOARD 1 #define REMOTE_BOARD 2 #define LBOARD_STRUCT_VERSION 2 typedef struct lboard_s { klconf_off_t brd_next; /* Next BOARD */ unsigned char struct_type; /* type of structure, local or remote */ unsigned char brd_type; /* type+class */ unsigned char brd_sversion; /* version of this structure */ unsigned char brd_brevision; /* board revision */ unsigned char brd_promver; /* board prom version, if any */ unsigned char brd_flags; /* Enabled, Disabled etc */ unsigned char brd_slot; /* slot number */ unsigned short brd_debugsw; /* Debug switches */ moduleid_t brd_module; /* module to which it belongs */ partid_t brd_partition; /* Partition number */ unsigned short brd_diagval; /* diagnostic value */ unsigned short brd_diagparm; /* diagnostic parameter */ unsigned char brd_inventory; /* inventory history */ unsigned char brd_numcompts; /* Number of components */ nic_t brd_nic; /* Number in CAN */ nasid_t brd_nasid; /* passed parameter */ klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ klconf_off_t brd_errinfo; /* Board's error information */ struct lboard_s *brd_parent; /* Logical parent for this brd */ devfs_handle_t brd_graph_link; /* vertex hdl to connect extern compts */ confidence_t brd_confidence; /* confidence that the board is bad */ nasid_t brd_owner; /* who owns this board */ unsigned char brd_nic_flags; /* To handle 8 more NICs */ char brd_name[32]; } lboard_t; /* * Make sure we pass back the calias space address for local boards. * klconfig board traversal and error structure extraction defines. */ #define BOARD_SLOT(_brd) ((_brd)->brd_slot) #define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type) #define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type) #define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) #define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) #define KLCF_MODULE_ID(_brd) ((_brd)->brd_module) #ifndef __ia64 #define KLCF_NEXT(_brd) ((_brd)->brd_next ? (lboard_t *)((_brd)->brd_next): NULL) #define KLCF_COMP(_brd, _ndx) \ (klinfo_t *)(NODE_OFFSET_TO_K0(NASID_GET(_brd), \ (_brd)->brd_compts[(_ndx)])) #define KLCF_COMP_ERROR(_brd, _comp) \ (NODE_OFFSET_TO_K0(NASID_GET(_brd), (_comp)->errinfo)) #else #define NODE_OFFSET_TO_KLINFO(n,off) ((klinfo_t*) TO_NODE_CAC(n,off)) #define KLCF_NEXT(_brd) \ ((_brd)->brd_next ? \ (NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next)): NULL) #define KLCF_COMP(_brd, _ndx) \ (NODE_OFFSET_TO_KLINFO(NASID_GET(_brd), (_brd)->brd_compts[(_ndx)])) #define KLCF_COMP_ERROR(_brd, _comp) \ (NODE_OFFSET_TO_K0(NASID_GET(_brd), (_comp)->errinfo)) #endif /* __ia64 */ #define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type) #define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ /* * Generic info structure. This stores common info about a * component. */ typedef struct klinfo_s { /* Generic info */ unsigned char struct_type; /* type of this structure */ unsigned char struct_version; /* version of this structure */ unsigned char flags; /* Enabled, disabled etc */ unsigned char revision; /* component revision */ unsigned short diagval; /* result of diagnostics */ unsigned short diagparm; /* diagnostic parameter */ unsigned char inventory; /* previous inventory status */ unsigned short partid; /* widget part number */ nic_t nic; /* MUst be aligned properly */ unsigned char physid; /* physical id of component */ unsigned int virtid; /* virtual id as seen by system */ unsigned char widid; /* Widget id - if applicable */ nasid_t nasid; /* node number - from parent */ char pad1; /* pad out structure. */ char pad2; /* pad out structure. */ COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ klconf_off_t errinfo; /* component specific errors */ unsigned short pad3; /* pci fields have moved over to */ unsigned short pad4; /* klbri_t */ } klinfo_t ; #define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE) /* * Component structures. * Following are the currently identified components: * CPU, HUB, MEM_BANK, * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) * BRIDGE, IOC3, SuperIO, SCSI, FDDI * ROUTER * GRAPHICS */ #define KLSTRUCT_UNKNOWN 0 #define KLSTRUCT_CPU 1 #define KLSTRUCT_HUB 2 #define KLSTRUCT_MEMBNK 3 #define KLSTRUCT_XBOW 4 #define KLSTRUCT_BRI 5 #define KLSTRUCT_IOC3 6 #define KLSTRUCT_PCI 7 #define KLSTRUCT_VME 8 #define KLSTRUCT_ROU 9 #define KLSTRUCT_GFX 10 #define KLSTRUCT_SCSI 11 #define KLSTRUCT_FDDI 12 #define KLSTRUCT_MIO 13 #define KLSTRUCT_DISK 14 #define KLSTRUCT_TAPE 15 #define KLSTRUCT_CDROM 16 #define KLSTRUCT_HUB_UART 17 #define KLSTRUCT_IOC3ENET 18 #define KLSTRUCT_IOC3UART 19 #define KLSTRUCT_UNUSED 20 /* XXX UNUSED */ #define KLSTRUCT_IOC3PCKM 21 #define KLSTRUCT_RAD 22 #define KLSTRUCT_HUB_TTY 23 #define KLSTRUCT_IOC3_TTY 24 /* Early Access IO proms are compatible only with KLSTRUCT values upto 24. */ #define KLSTRUCT_FIBERCHANNEL 25 #define KLSTRUCT_MOD_SERIAL_NUM 26 #define KLSTRUCT_IOC3MS 27 #define KLSTRUCT_TPU 28 #define KLSTRUCT_GSN_A 29 #define KLSTRUCT_GSN_B 30 #define KLSTRUCT_XTHD 31 #define KLSTRUCT_QLFIBRE 32 #define KLSTRUCT_1394 33 #define KLSTRUCT_USB 34 #define KLSTRUCT_USBKBD 35 #define KLSTRUCT_USBMS 36 /* * These are the indices of various components within a lboard structure. */ #define IP27_CPU0_INDEX 0 #define IP27_CPU1_INDEX 1 #define IP27_HUB_INDEX 2 #define IP27_MEM_INDEX 3 #define BASEIO_BRIDGE_INDEX 0 #define BASEIO_IOC3_INDEX 1 #define BASEIO_SCSI1_INDEX 2 #define BASEIO_SCSI2_INDEX 3 #define MIDPLANE_XBOW_INDEX 0 #define ROUTER_COMPONENT_INDEX 0 #define CH4SCSI_BRIDGE_INDEX 0 /* Info holders for various hardware components */ typedef u64 *pci_t; typedef u64 *vmeb_t; typedef u64 *vmed_t; typedef u64 *fddi_t; typedef u64 *scsi_t; typedef u64 *mio_t; typedef u64 *graphics_t; typedef u64 *router_t; /* * The port info in ip27_cfg area translates to a lboart_t in the * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t * is stored in terms of a nasid and a offset from start of KLCONFIG * area on that nasid. */ typedef struct klport_s { nasid_t port_nasid; unsigned char port_flag; klconf_off_t port_offset; } klport_t; typedef struct klcpu_s { /* CPU */ klinfo_t cpu_info; unsigned short cpu_prid; /* Processor PRID value */ unsigned short cpu_fpirr; /* FPU IRR value */ unsigned short cpu_speed; /* Speed in MHZ */ unsigned short cpu_scachesz; /* secondary cache size in MB */ unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ } klcpu_t ; #define CPU_STRUCT_VERSION 2 typedef struct klhub_s { /* HUB */ klinfo_t hub_info; uint hub_flags; /* PCFG_HUB_xxx flags */ klport_t hub_port; /* hub is connected to this */ nic_t hub_box_nic; /* nic of containing box */ klconf_off_t hub_mfg_nic; /* MFG NIC string */ u64 hub_speed; /* Speed of hub in HZ */ } klhub_t ; typedef struct klhub_uart_s { /* HUB */ klinfo_t hubuart_info; uint hubuart_flags; /* PCFG_HUB_xxx flags */ nic_t hubuart_box_nic; /* nic of containing box */ } klhub_uart_t ; #define MEMORY_STRUCT_VERSION 2 typedef struct klmembnk_s { /* MEMORY BANK */ klinfo_t membnk_info; short membnk_memsz; /* Total memory in megabytes */ short membnk_dimm_select; /* bank to physical addr mapping*/ short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */ short membnk_attr; } klmembnk_t ; #define KLCONFIG_MEMBNK_SIZE(_info, _bank) \ ((_info)->membnk_bnksz[(_bank)]) #define MEMBNK_PREMIUM 1 #define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \ ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) #define MAX_SERIAL_NUM_SIZE 10 typedef struct klmod_serial_num_s { klinfo_t snum_info; union { char snum_str[MAX_SERIAL_NUM_SIZE]; unsigned long long snum_int; } snum; } klmod_serial_num_t; /* Macros needed to access serial number structure in lboard_t. Hard coded values are necessary since we cannot treat serial number struct as a component without losing compatibility between prom versions. */ #define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ KLCF_COMP(_l, _l->brd_numcompts)) #define MAX_XBOW_LINKS 16 typedef struct klxbow_s { /* XBOW */ klinfo_t xbow_info ; klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */ int xbow_master_hub_link; /* type of brd connected+component struct ptr+flags */ } klxbow_t ; #define MAX_PCI_SLOTS 8 typedef struct klpci_device_s { s32 pci_device_id; /* 32 bits of vendor/device ID. */ s32 pci_device_pad; /* 32 bits of padding. */ } klpci_device_t; #define BRIDGE_STRUCT_VERSION 2 typedef struct klbri_s { /* BRIDGE */ klinfo_t bri_info ; unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ pci_t pci_specific ; /* PCI Board config info */ klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */ klconf_off_t bri_mfg_nic ; } klbri_t ; #define MAX_IOC3_TTY 2 typedef struct klioc3_s { /* IOC3 */ klinfo_t ioc3_info ; unsigned char ioc3_ssram ; /* Info about ssram */ unsigned char ioc3_nvram ; /* Info about nvram */ klinfo_t ioc3_superio ; /* Info about superio */ klconf_off_t ioc3_tty_off ; klinfo_t ioc3_enet ; klconf_off_t ioc3_enet_off ; klconf_off_t ioc3_kbd_off ; } klioc3_t ; #define MAX_VME_SLOTS 8 typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ klinfo_t vmeb_info ; vmeb_t vmeb_specific ; klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ } klvmeb_t ; typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ klinfo_t vmed_info ; vmed_t vmed_specific ; klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ } klvmed_t ; #define ROUTER_VECTOR_VERS 2 /* XXX - Don't we need the number of ports here?!? */ typedef struct klrou_s { /* ROUTER */ klinfo_t rou_info ; uint rou_flags ; /* PCFG_ROUTER_xxx flags */ nic_t rou_box_nic ; /* nic of the containing module */ klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ klconf_off_t rou_mfg_nic ; /* MFG NIC string */ u64 rou_vector; /* vector from master node */ } klrou_t ; /* * Graphics Controller/Device * * (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier * used a couple different structures to store graphics information. * For compatibility reasons, the newer data structure preserves some * of the layout so that fields that are used in the old versions remain * in the same place (with the same info). Determination of what version * of this structure we have is done by checking the cookie field. */ #define KLGFX_COOKIE 0x0c0de000 typedef struct klgfx_s { /* GRAPHICS Device */ klinfo_t gfx_info; klconf_off_t old_gndevs; /* for compatibility with older proms */ klconf_off_t old_gdoff0; /* for compatibility with older proms */ uint cookie; /* for compatibility with older proms */ uint moduleslot; struct klgfx_s *gfx_next_pipe; graphics_t gfx_specific; klconf_off_t pad0; /* for compatibility with older proms */ klconf_off_t gfx_mfg_nic; } klgfx_t; typedef struct klxthd_s { klinfo_t xthd_info ; klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ } klxthd_t ; typedef struct kltpu_s { /* TPU board */ klinfo_t tpu_info ; klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ } kltpu_t ; typedef struct klgsn_s { /* GSN board */ klinfo_t gsn_info ; klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ } klgsn_t ; #define MAX_SCSI_DEVS 16 /* * NOTE: THis is the max sized kl* structure and is used in klmalloc.c * to allocate space of type COMPONENT. Make sure that if the size of * any other component struct becomes more than this, then redefine * that as the size to be klmalloced. */ typedef struct klscsi_s { /* SCSI Controller */ klinfo_t scsi_info ; scsi_t scsi_specific ; unsigned char scsi_numdevs ; klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ; } klscsi_t ; typedef struct klscdev_s { /* SCSI device */ klinfo_t scdev_info ; struct scsidisk_data *scdev_cfg ; /* driver fills up this */ } klscdev_t ; typedef struct klttydev_s { /* TTY device */ klinfo_t ttydev_info ; struct terminal_data *ttydev_cfg ; /* driver fills up this */ } klttydev_t ; typedef struct klenetdev_s { /* ENET device */ klinfo_t enetdev_info ; struct net_data *enetdev_cfg ; /* driver fills up this */ } klenetdev_t ; typedef struct klkbddev_s { /* KBD device */ klinfo_t kbddev_info ; struct keyboard_data *kbddev_cfg ; /* driver fills up this */ } klkbddev_t ; typedef struct klmsdev_s { /* mouse device */ klinfo_t msdev_info ; void *msdev_cfg ; } klmsdev_t ; #define MAX_FDDI_DEVS 10 /* XXX Is this true */ typedef struct klfddi_s { /* FDDI */ klinfo_t fddi_info ; fddi_t fddi_specific ; klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ; } klfddi_t ; typedef struct klmio_s { /* MIO */ klinfo_t mio_info ; mio_t mio_specific ; } klmio_t ; /* * USB info */ typedef struct klusb_s { klinfo_t usb_info; /* controller info */ void *usb_bus; /* handle to usb_bus_t */ uint64_t usb_controller; /* ptr to controller info */ } klusb_t ; typedef union klcomp_s { klcpu_t kc_cpu; klhub_t kc_hub; klmembnk_t kc_mem; klxbow_t kc_xbow; klbri_t kc_bri; klioc3_t kc_ioc3; klvmeb_t kc_vmeb; klvmed_t kc_vmed; klrou_t kc_rou; klgfx_t kc_gfx; klscsi_t kc_scsi; klscdev_t kc_scsi_dev; klfddi_t kc_fddi; klmio_t kc_mio; klmod_serial_num_t kc_snum ; klusb_t kc_usb; } klcomp_t; typedef union kldev_s { /* for device structure allocation */ klscdev_t kc_scsi_dev ; klttydev_t kc_tty_dev ; klenetdev_t kc_enet_dev ; klkbddev_t kc_kbd_dev ; } kldev_t ; /* Data structure interface routines. TBD */ /* Include launch info in this file itself? TBD */ /* * TBD - Can the ARCS and device driver related info also be included in the * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t * structure, viz private to the IO4prom. */ /* * TBD - Allocation issues. * * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component, * errinfo and allocate from them, or have a single heap and allocate all * structures from it. Debug is easier in the former method since we can * dump all similar structs in one command, but there will be lots of holes, * in memory and max limits are needed for number of structures. * Another way to make it organized, is to have a union of all components * and allocate a aligned chunk of memory greater than the biggest * component. */ typedef union { lboard_t *lbinfo ; } biptr_t ; #define BRI_PER_XBOW 6 #define PCI_PER_BRI 8 #define DEV_PER_PCI 16 /* Virtual dipswitch values (starting from switch "7"): */ #define VDS_NOGFX 0x8000 /* Don't enable gfx and autoboot */ #define VDS_NOMP 0x100 /* Don't start slave processors */ #define VDS_MANUMODE 0x80 /* Manufacturing mode */ #define VDS_NOARB 0x40 /* No bootmaster arbitration */ #define VDS_PODMODE 0x20 /* Go straight to POD mode */ #define VDS_NO_DIAGS 0x10 /* Don't run any diags after BM arb */ #define VDS_DEFAULTS 0x08 /* Use default environment values */ #define VDS_NOMEMCLEAR 0x04 /* Don't run mem cfg code */ #define VDS_2ND_IO4 0x02 /* Boot from the second IO4 */ #define VDS_DEBUG_PROM 0x01 /* Print PROM debugging messages */ /* external declarations of Linux kernel functions. */ extern lboard_t *find_lboard(lboard_t *start, unsigned char type); extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type); extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type); extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int); extern xwidgetnum_t nodevertex_widgetnum_get(devfs_handle_t node_vtx); extern devfs_handle_t nodevertex_xbow_peer_get(devfs_handle_t node_vtx); extern lboard_t *find_gfxpipe(int pipenum); extern void setup_gfxpipe_link(devfs_handle_t vhdl,int pipenum); extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class); extern lboard_t *find_lboard_module_class(lboard_t *start, moduleid_t mod, unsigned char brd_class); extern lboard_t *find_nic_lboard(lboard_t *, nic_t); extern lboard_t *find_nic_type_lboard(nasid_t, unsigned char, nic_t); extern lboard_t *find_lboard_modslot(lboard_t *start, moduleid_t mod, slotid_t slot); extern lboard_t *find_lboard_module(lboard_t *start, moduleid_t mod); extern lboard_t *get_board_name(nasid_t nasid, moduleid_t mod, slotid_t slot, char *name); extern int config_find_nic_router(nasid_t, nic_t, lboard_t **, klrou_t**); extern int config_find_nic_hub(nasid_t, nic_t, lboard_t **, klhub_t**); extern int config_find_xbow(nasid_t, lboard_t **, klxbow_t**); extern klcpu_t *get_cpuinfo(cpuid_t cpu); extern int update_klcfg_cpuinfo(nasid_t, int); extern void board_to_path(lboard_t *brd, char *path); extern moduleid_t get_module_id(nasid_t nasid); extern void nic_name_convert(char *old_name, char *new_name); extern int module_brds(nasid_t nasid, lboard_t **module_brds, int n); extern lboard_t *brd_from_key(uint64_t key); extern void device_component_canonical_name_get(lboard_t *,klinfo_t *, char *); extern int board_serial_number_get(lboard_t *,char *); extern int is_master_baseio(nasid_t,moduleid_t,slotid_t); extern nasid_t get_actual_nasid(lboard_t *brd) ; extern net_vec_t klcfg_discover_route(lboard_t *, lboard_t *, int); #endif /* _ASM_SN_KLCONFIG_H */