/* * BRIEF MODULE DESCRIPTION * Momentum Computer Ocelot-C and -CS board dependent boot routines * * Copyright (C) 1996, 1997, 2001 Ralf Baechle * Copyright (C) 2000 RidgeRun, Inc. * Copyright (C) 2001 Red Hat, Inc. * Copyright (C) 2002 Momentum Computer * * Author: Matthew Dharm, Momentum Computer * mdharm@momenco.com * * Louis Hamilton, Red Hat, Inc. * hamilton@redhat.com [MIPS64 modifications] * * Author: RidgeRun, Inc. * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com * * Copyright 2001 MontaVista Software Inc. * Author: jsun@mvista.com or jsun@junsun.net * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ocelot_c_fpga.h" unsigned long marvell_base; unsigned int cpu_clock; /* These functions are used for rebooting or halting the machine*/ extern void momenco_ocelot_restart(char *command); extern void momenco_ocelot_halt(void); extern void momenco_ocelot_power_off(void); void momenco_time_init(void); static char reset_reason; void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long entryhi, unsigned long pagemask); static unsigned long ENTRYLO(unsigned long paddr) { return ((paddr & PAGE_MASK) | (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED)) >> 6; } /* setup code for a handoff from a version 2 PMON 2000 PROM */ void PMON_v2_setup(void) { /* Some wired TLB entries for the MV64340 and perhiperals. The MV64340 is going to be hit on every IRQ anyway - there's absolutely no point in letting it be a random TLB entry, as it'll just cause needless churning of the TLB. And we use the other half for the serial port, which is just a PITA otherwise :) Device Physical Virtual MV64340 Internal Regs 0xf4000000 0xf4000000 Ocelot-C[S] PLD (CS0) 0xfc000000 0xfc000000 NVRAM (CS1) 0xfc800000 0xfc800000 UARTs (CS2) 0xfd000000 0xfd000000 Internal SRAM 0xfe000000 0xfe000000 M-Systems DOC (CS3) 0xff000000 0xff000000 */ printk("PMON_v2_setup\n"); #ifdef CONFIG_64BIT /* marvell and extra space */ add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xfffffffff4000000, PM_64K); /* fpga, rtc, and uart */ add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfffffffffc000000, PM_16M); /* m-sys and internal SRAM */ add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M); marvell_base = 0xfffffffff4000000; #else /* marvell and extra space */ add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xf4000000, PM_64K); /* fpga, rtc, and uart */ add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfc000000, PM_16M); /* m-sys and internal SRAM */ add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M); marvell_base = 0xf4000000; #endif } unsigned long m48t37y_get_time(void) { #ifdef CONFIG_64BIT unsigned char *rtc_base = (unsigned char*)0xfffffffffc800000; #else unsigned char* rtc_base = (unsigned char*)0xfc800000; #endif unsigned int year, month, day, hour, min, sec; unsigned long flags; spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; year = BCD2BIN(rtc_base[0x7fff]); year += BCD2BIN(rtc_base[0x7ff1]) * 100; month = BCD2BIN(rtc_base[0x7ffe]); day = BCD2BIN(rtc_base[0x7ffd]); hour = BCD2BIN(rtc_base[0x7ffb]); min = BCD2BIN(rtc_base[0x7ffa]); sec = BCD2BIN(rtc_base[0x7ff9]); /* start the update */ rtc_base[0x7ff8] = 0x00; spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } int m48t37y_set_time(unsigned long sec) { #ifdef CONFIG_64BIT unsigned char* rtc_base = (unsigned char*)0xfffffffffc800000; #else unsigned char* rtc_base = (unsigned char*)0xfc800000; #endif struct rtc_time tm; unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; /* year */ rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100); rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100); /* month */ rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon); /* day */ rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday); /* hour/min/sec */ rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour); rtc_base[0x7ffa] = BIN2BCD(tm.tm_min); rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec); /* day of week -- not really used, but let's keep it up-to-date */ rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1); /* disable writing */ rtc_base[0x7ff8] = 0x00; spin_unlock_irqrestore(&rtc_lock, flags); return 0; } void __init plat_timer_setup(struct irqaction *irq) { setup_irq(7, irq); } void momenco_time_init(void) { #ifdef CONFIG_CPU_SR71000 mips_hpt_frequency = cpu_clock; #elif defined(CONFIG_CPU_RM7000) mips_hpt_frequency = cpu_clock / 2; #else #error Unknown CPU for this board #endif printk("momenco_time_init cpu_clock=%d\n", cpu_clock); rtc_mips_get_time = m48t37y_get_time; rtc_mips_set_time = m48t37y_set_time; } void __init plat_mem_setup(void) { unsigned int tmpword; board_time_init = momenco_time_init; _machine_restart = momenco_ocelot_restart; _machine_halt = momenco_ocelot_halt; pm_power_off = momenco_ocelot_power_off; /* * initrd_start = (unsigned long)ocelot_initrd_start; * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size; * initrd_below_start_ok = 1; */ /* do handoff reconfiguration */ PMON_v2_setup(); /* shut down ethernet ports, just to be sure our memory doesn't get * corrupted by random ethernet traffic. */ MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); do {} while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); do {} while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); do {} while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); do {} while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0), MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1), MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); /* Turn off the Bit-Error LED */ OCELOT_FPGA_WRITE(0x80, CLR); tmpword = OCELOT_FPGA_READ(BOARDREV); #ifdef CONFIG_CPU_SR71000 if (tmpword < 26) printk("Momenco Ocelot-CS: Board Assembly Rev. %c\n", 'A'+tmpword); else printk("Momenco Ocelot-CS: Board Assembly Revision #0x%x\n", tmpword); #else if (tmpword < 26) printk("Momenco Ocelot-C: Board Assembly Rev. %c\n", 'A'+tmpword); else printk("Momenco Ocelot-C: Board Assembly Revision #0x%x\n", tmpword); #endif tmpword = OCELOT_FPGA_READ(FPGA_REV); printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15); tmpword = OCELOT_FPGA_READ(RESET_STATUS); printk("Reset reason: 0x%x\n", tmpword); switch (tmpword) { case 0x1: printk(" - Power-up reset\n"); break; case 0x2: printk(" - Push-button reset\n"); break; case 0x4: printk(" - cPCI bus reset\n"); break; case 0x8: printk(" - Watchdog reset\n"); break; case 0x10: printk(" - Software reset\n"); break; default: printk(" - Unknown reset cause\n"); } reset_reason = tmpword; OCELOT_FPGA_WRITE(0xff, RESET_STATUS); tmpword = OCELOT_FPGA_READ(CPCI_ID); printk("cPCI ID register: 0x%02x\n", tmpword); printk(" - Slot number: %d\n", tmpword & 0x1f); printk(" - PCI bus present: %s\n", tmpword & 0x40 ? "yes" : "no"); printk(" - System Slot: %s\n", tmpword & 0x20 ? "yes" : "no"); tmpword = OCELOT_FPGA_READ(BOARD_STATUS); printk("Board Status register: 0x%02x\n", tmpword); printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent"); printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent"); printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1); printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3))); switch(tmpword &3) { case 3: /* 512MiB */ add_memory_region(0x0, 0x200<<20, BOOT_MEM_RAM); break; case 2: /* 256MiB */ add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM); break; case 1: /* 128MiB */ add_memory_region(0x0, 0x80<<20, BOOT_MEM_RAM); break; case 0: /* 1GiB -- needs CONFIG_HIGHMEM */ add_memory_region(0x0, 0x400<<20, BOOT_MEM_RAM); break; } } /* * This needs to be one of the first initcalls, because no I/O port access * can work before this */ static int io_base_ioremap(void) { void __iomem * io_remap_range = ioremap(0xc0000000UL, 0x10000); if (!io_remap_range) panic("Could not ioremap I/O port range"); set_io_port_base((unsigned long) io_remap_range); return 0; } module_init(io_base_ioremap);