/* ********************************************************************* * BCM1280/BCM1400 Board Support Package * * SCD Constants and Macros File: bcm1480_scd.h * * This module contains constants and macros useful for * manipulating the System Control and Debug module. * * BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03) * ********************************************************************* * * Copyright 2000,2001,2002,2003,2004,2005 * Broadcom Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ #ifndef _BCM1480_SCD_H #define _BCM1480_SCD_H #include "sb1250_defs.h" /* ********************************************************************* * Pull in the BCM1250's SCD since lots of stuff is the same. ********************************************************************* */ #include "sb1250_scd.h" /* ********************************************************************* * Some general notes: * * This file is basically a "what's new" header file. Since the * BCM1250 and the new BCM1480 (and derivatives) share many common * features, this file contains only what's new or changed from * the 1250. (above, you can see that we include the 1250 symbols * to get the base functionality). * * In software, be sure to use the correct symbols, particularly * for blocks that are different between the two chip families. * All BCM1480-specific symbols have _BCM1480_ in their names, * and all BCM1250-specific and "base" functions that are common in * both chips have no special names (this is for compatibility with * older include files). Therefore, if you're working with the * SCD, which is very different on each chip, A_SCD_xxx implies * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480 * version. ********************************************************************* */ /* ********************************************************************* * System control/debug registers ********************************************************************* */ /* * System Identification and Revision Register (Table 12) * Register: SCD_SYSTEM_REVISION * This register is field compatible with the 1250. */ /* * New part definitions */ #define K_SYS_PART_BCM1480 0x1406 #define K_SYS_PART_BCM1280 0x1206 #define K_SYS_PART_BCM1455 0x1407 #define K_SYS_PART_BCM1255 0x1257 #define K_SYS_PART_BCM1158 0x1156 /* * Manufacturing Information Register (Table 14) * Register: SCD_SYSTEM_MANUF */ /* * System Configuration Register (Table 15) * Register: SCD_SYSTEM_CFG * Entire register is different from 1250, all new constants below */ #define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0) #define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1) #define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2) #define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3) #define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4) #define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5) #define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6) #define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV) #define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV) #define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV) #define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11) #define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV) #define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV) #define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV) #define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) #define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17) #define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18) #define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE) #define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE) #define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE) #define K_BCM1480_SYS_BOOT_MODE_ROM32 0 #define K_BCM1480_SYS_BOOT_MODE_ROM8 1 #define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2 #define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3 #define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19) #define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20) #define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21) #define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) #define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23) #define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24) #define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25) #define S_BCM1480_SYS_CONFIG 26 #define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG) #define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG) #define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG) #define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32, 15) #define S_BCM1480_SYS_NODEID 47 #define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID) #define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID) #define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID) #define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51) #define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52) #define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53) #define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54) #define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55) #define S_BCM1480_SYS_DISABLECPU0 56 #define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0) #define S_BCM1480_SYS_DISABLECPU1 57 #define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1) #define S_BCM1480_SYS_DISABLECPU2 58 #define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2) #define S_BCM1480_SYS_DISABLECPU3 59 #define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3) #define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60) #define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61) #define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62) #define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63) /* * Scratch Register (Table 16) * Register: SCD_SYSTEM_SCRATCH * Same as BCM1250 */ /* * Mailbox Registers (Table 17) * Registers: SCD_MBOX_{0,1}_CPU_x * Same as BCM1250 */ /* * See bcm1480_int.h for interrupt mapper registers. */ /* * Watchdog Timer Initial Count Registers (Table 23) * Registers: SCD_WDOG_INIT_CNT_x * * The watchdogs are almost the same as the 1250, except * the configuration register has more bits to control the * other CPUs. */ /* * Watchdog Timer Configuration Registers (Table 25) * Registers: SCD_WDOG_CFG_x */ #define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0) #define S_BCM1480_SCD_WDOG_RESET_TYPE 2 #define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE) #define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE) #define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE, M_BCM1480_SCD_WDOG_RESET_TYPE) #define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ #define K_BCM1480_SCD_WDOG_RESET_SOFT 1 #define K_BCM1480_SCD_WDOG_RESET_CPU0 3 #define K_BCM1480_SCD_WDOG_RESET_CPU1 5 #define K_BCM1480_SCD_WDOG_RESET_CPU2 9 #define K_BCM1480_SCD_WDOG_RESET_CPU3 17 #define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31 #define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8) /* * General Timer Initial Count Registers (Table 26) * Registers: SCD_TIMER_INIT_x * * The timer registers are the same as the BCM1250 */ /* * ZBbus Count Register (Table 29) * Register: ZBBUS_CYCLE_COUNT * * Same as BCM1250 */ /* * ZBbus Compare Registers (Table 30) * Registers: ZBBUS_CYCLE_CPx * * Same as BCM1250 */ /* * System Performance Counter Configuration Register (Table 31) * Register: PERF_CNT_CFG_0 * * SPC_CFG_SRC[0-3] is the same as the 1250. * SPC_CFG_SRC[4-7] only exist on the 1480 * The clear/enable bits are in different locations on the 1250 and 1480. */ #define S_SPC_CFG_SRC4 32 #define M_SPC_CFG_SRC4 _SB_MAKEMASK(8, S_SPC_CFG_SRC4) #define V_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC4) #define G_SPC_CFG_SRC4(x) _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4) #define S_SPC_CFG_SRC5 40 #define M_SPC_CFG_SRC5 _SB_MAKEMASK(8, S_SPC_CFG_SRC5) #define V_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC5) #define G_SPC_CFG_SRC5(x) _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5) #define S_SPC_CFG_SRC6 48 #define M_SPC_CFG_SRC6 _SB_MAKEMASK(8, S_SPC_CFG_SRC6) #define V_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC6) #define G_SPC_CFG_SRC6(x) _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6) #define S_SPC_CFG_SRC7 56 #define M_SPC_CFG_SRC7 _SB_MAKEMASK(8, S_SPC_CFG_SRC7) #define V_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC7) #define G_SPC_CFG_SRC7(x) _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7) /* * System Performance Counter Control Register (Table 32) * Register: PERF_CNT_CFG_1 * BCM1480 specific */ #define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0) #define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1) #if SIBYTE_HDR_FEATURE_CHIP(1480) #define M_SPC_CFG_CLEAR M_BCM1480_SPC_CFG_CLEAR #define M_SPC_CFG_ENABLE M_BCM1480_SPC_CFG_ENABLE #endif /* * System Performance Counters (Table 33) * Registers: PERF_CNT_x */ #define S_BCM1480_SPC_CNT_COUNT 0 #define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT) #define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT) #define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT) #define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40) /* * Bus Watcher Error Status Register (Tables 36, 37) * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG * Same as BCM1250. */ /* * Bus Watcher Error Data Registers (Table 38) * Registers: BUS_ERR_DATA_x * Same as BCM1250. */ /* * Bus Watcher L2 ECC Counter Register (Table 39) * Register: BUS_L2_ERRORS * Same as BCM1250. */ /* * Bus Watcher Memory and I/O Error Counter Register (Table 40) * Register: BUS_MEM_IO_ERRORS * Same as BCM1250. */ /* * Address Trap Registers * * Register layout same as BCM1250, almost. The bus agents * are different, and the address trap configuration bits are * slightly different. */ #define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4, 0) #define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40, 0) #define S_BCM1480_ATRAP_CFG_CNT 0 #define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT) #define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT) #define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT) #define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3) #define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4) #define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5) #define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6) #define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7) #define S_BCM1480_ATRAP_CFG_AGENTID 8 #define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID) #define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID) #define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID) #define K_BCM1480_BUS_AGENT_CPU0 0 #define K_BCM1480_BUS_AGENT_CPU1 1 #define K_BCM1480_BUS_AGENT_NC 2 #define K_BCM1480_BUS_AGENT_IOB 3 #define K_BCM1480_BUS_AGENT_SCD 4 #define K_BCM1480_BUS_AGENT_L2C 6 #define K_BCM1480_BUS_AGENT_MC 7 #define K_BCM1480_BUS_AGENT_CPU2 8 #define K_BCM1480_BUS_AGENT_CPU3 9 #define K_BCM1480_BUS_AGENT_PM 10 #define S_BCM1480_ATRAP_CFG_CATTR 12 #define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR) #define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR) #define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR) #define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0 #define K_BCM1480_ATRAP_CFG_CATTR_UNC 1 #define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2 #define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3 #define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14) /* * Trace Event Registers (Table 47) * Same as BCM1250. */ /* * Trace Sequence Control Registers (Table 48) * Registers: TRACE_SEQUENCE_x * * Same as BCM1250 except for two new fields. */ #define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25) #define S_BCM1480_SCD_TRSEQ_SWFUNC 26 #define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC) #define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC) #define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC) /* * Trace Control Register (Table 49) * Register: TRACE_CFG * * BCM1480 changes to this register (other than location of the CUR_ADDR field) * are defined below. */ #define S_BCM1480_SCD_TRACE_CFG_MODE 16 #define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE) #define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE) #define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE) #define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0 #define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1 #define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2 #endif /* _BCM1480_SCD_H */