/*
 * MPC8572 DS Core0 Device Tree Source in CAMP mode.
 *
 * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
 * can be shared, all the other devices must be assigned to one core only.
 * This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0,
 * eth1, crypto, pci0, pci1.
 *
 * Copyright 2007-2009 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/dts-v1/;
/ {
	model = "fsl,MPC8572DS";
	compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		serial0 = &serial0;
		pci0 = &pci0;
		pci1 = &pci1;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,8572@0 {
			device_type = "cpu";
			reg = <0x0>;
			d-cache-line-size = <32>;	// 32 bytes
			i-cache-line-size = <32>;	// 32 bytes
			d-cache-size = <0x8000>;		// L1, 32K
			i-cache-size = <0x8000>;		// L1, 32K
			timebase-frequency = <0>;
			bus-frequency = <0>;
			clock-frequency = <0>;
			next-level-cache = <&L2>;
		};

	};

	memory {
		device_type = "memory";
		reg = <0x0 0x0>;	// Filled by U-Boot
	};

	soc8572@ffe00000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "simple-bus";
		ranges = <0x0 0xffe00000 0x100000>;
		bus-frequency = <0>;		// Filled out by uboot.

		ecm-law@0 {
			compatible = "fsl,ecm-law";
			reg = <0x0 0x1000>;
			fsl,num-laws = <12>;
		};

		ecm@1000 {
			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
			reg = <0x1000 0x1000>;
			interrupts = <17 2>;
			interrupt-parent = <&mpic>;
		};

		memory-controller@2000 {
			compatible = "fsl,mpc8572-memory-controller";
			reg = <0x2000 0x1000>;
			interrupt-parent = <&mpic>;
			interrupts = <18 2>;
		};

		memory-controller@6000 {
			compatible = "fsl,mpc8572-memory-controller";
			reg = <0x6000 0x1000>;
			interrupt-parent = <&mpic>;
			interrupts = <18 2>;
		};

		L2: l2-cache-controller@20000 {
			compatible = "fsl,mpc8572-l2-cache-controller";
			reg = <0x20000 0x1000>;
			cache-line-size = <32>;	// 32 bytes
			cache-size = <0x80000>;	// L2, 512K
			interrupt-parent = <&mpic>;
			interrupts = <16 2>;
		};

		i2c@3000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			compatible = "fsl-i2c";
			reg = <0x3000 0x100>;
			interrupts = <43 2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		i2c@3100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <1>;
			compatible = "fsl-i2c";
			reg = <0x3100 0x100>;
			interrupts = <43 2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		dma@21300 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
			reg = <0x21300 0x4>;
			ranges = <0x0 0x21100 0x200>;
			cell-index = <0>;
			dma-channel@0 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x0 0x80>;
				cell-index = <0>;
				interrupt-parent = <&mpic>;
				interrupts = <20 2>;
			};
			dma-channel@80 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x80 0x80>;
				cell-index = <1>;
				interrupt-parent = <&mpic>;
				interrupts = <21 2>;
			};
			dma-channel@100 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x100 0x80>;
				cell-index = <2>;
				interrupt-parent = <&mpic>;
				interrupts = <22 2>;
			};
			dma-channel@180 {
				compatible = "fsl,mpc8572-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x180 0x80>;
				cell-index = <3>;
				interrupt-parent = <&mpic>;
				interrupts = <23 2>;
			};
		};

		enet0: ethernet@24000 {
			#address-cells = <1>;
			#size-cells = <1>;
			cell-index = <0>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x24000 0x1000>;
			ranges = <0x0 0x24000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <29 2 30 2 34 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy0>;
			phy-connection-type = "rgmii-id";

			mdio@520 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,gianfar-mdio";
				reg = <0x520 0x20>;

				phy0: ethernet-phy@0 {
					interrupt-parent = <&mpic>;
					interrupts = <10 1>;
					reg = <0x0>;
				};
				phy1: ethernet-phy@1 {
					interrupt-parent = <&mpic>;
					interrupts = <10 1>;
					reg = <0x1>;
				};
			};
		};

		enet1: ethernet@25000 {
			cell-index = <1>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x25000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <35 2 36 2 40 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy1>;
			phy-connection-type = "rgmii-id";
		};

		serial0: serial@4500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4500 0x100>;
			clock-frequency = <0>;
		};

		msi@41600 {
			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
			reg = <0x41600 0x80>;
			msi-available-ranges = <0 0x80>;
			interrupts = <
				0xe0 0
				0xe1 0
				0xe2 0
				0xe3 0>;
			interrupt-parent = <&mpic>;
		};

		global-utilities@e0000 {	//global utilities block
			compatible = "fsl,mpc8572-guts";
			reg = <0xe0000 0x1000>;
			fsl,has-rstcr;
		};

		crypto@30000 {
			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
				     "fsl,sec2.1", "fsl,sec2.0";
			reg = <0x30000 0x10000>;
			interrupts = <45 2 58 2>;
			interrupt-parent = <&mpic>;
			fsl,num-channels = <4>;
			fsl,channel-fifo-len = <24>;
			fsl,exec-units-mask = <0x9fe>;
			fsl,descriptor-types-mask = <0x3ab0ebf>;
		};

		mpic: pic@40000 {
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x40000 0x40000>;
			compatible = "chrp,open-pic";
			device_type = "open-pic";
			protected-sources = <
			31 32 33 37 38 39       /* enet2 enet3 */
			76 77 78 79 26 42	/* dma2 pci2 serial*/
			0xe4 0xe5 0xe6 0xe7	/* msi */
			>;
		};
	};

	pci0: pcie@ffe08000 {
		compatible = "fsl,mpc8548-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xffe08000 0x1000>;
		bus-range = <0 255>;
		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
			  0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <24 2>;
		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
		interrupt-map = <
			/* IDSEL 0x11 func 0 - PCI slot 1 */
			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 1 - PCI slot 1 */
			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 2 - PCI slot 1 */
			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 3 - PCI slot 1 */
			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 4 - PCI slot 1 */
			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 5 - PCI slot 1 */
			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 6 - PCI slot 1 */
			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 func 7 - PCI slot 1 */
			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x12 func 0 - PCI slot 2 */
			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 1 - PCI slot 2 */
			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 2 - PCI slot 2 */
			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 3 - PCI slot 2 */
			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 4 - PCI slot 2 */
			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 5 - PCI slot 2 */
			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 6 - PCI slot 2 */
			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1

			/* IDSEL 0x12 func 7 - PCI slot 2 */
			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1

			// IDSEL 0x1c  USB
			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2

			// IDSEL 0x1d  Audio
			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2

			// IDSEL 0x1e Legacy
			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2

			// IDSEL 0x1f IDE/SATA
			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2

			>;

		pcie@0 {
			reg = <0x0 0x0 0x0 0x0 0x0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <0x2000000 0x0 0x80000000
				  0x2000000 0x0 0x80000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x10000>;
			uli1575@0 {
				reg = <0x0 0x0 0x0 0x0 0x0>;
				#size-cells = <2>;
				#address-cells = <3>;
				ranges = <0x2000000 0x0 0x80000000
					  0x2000000 0x0 0x80000000
					  0x0 0x20000000

					  0x1000000 0x0 0x0
					  0x1000000 0x0 0x0
					  0x0 0x10000>;
				isa@1e {
					device_type = "isa";
					#interrupt-cells = <2>;
					#size-cells = <1>;
					#address-cells = <2>;
					reg = <0xf000 0x0 0x0 0x0 0x0>;
					ranges = <0x1 0x0 0x1000000 0x0 0x0
						  0x1000>;
					interrupt-parent = <&i8259>;

					i8259: interrupt-controller@20 {
						reg = <0x1 0x20 0x2
						       0x1 0xa0 0x2
						       0x1 0x4d0 0x2>;
						interrupt-controller;
						device_type = "interrupt-controller";
						#address-cells = <0>;
						#interrupt-cells = <2>;
						compatible = "chrp,iic";
						interrupts = <9 2>;
						interrupt-parent = <&mpic>;
					};

					i8042@60 {
						#size-cells = <0>;
						#address-cells = <1>;
						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
						interrupts = <1 3 12 3>;
						interrupt-parent =
							<&i8259>;

						keyboard@0 {
							reg = <0x0>;
							compatible = "pnpPNP,303";
						};

						mouse@1 {
							reg = <0x1>;
							compatible = "pnpPNP,f03";
						};
					};

					rtc@70 {
						compatible = "pnpPNP,b00";
						reg = <0x1 0x70 0x2>;
					};

					gpio@400 {
						reg = <0x1 0x400 0x80>;
					};
				};
			};
		};

	};

	pci1: pcie@ffe09000 {
		compatible = "fsl,mpc8548-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xffe09000 0x1000>;
		bus-range = <0 255>;
		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
			  0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <25 2>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0x0 0x0 0x1 &mpic 0x4 0x1
			0000 0x0 0x0 0x2 &mpic 0x5 0x1
			0000 0x0 0x0 0x3 &mpic 0x6 0x1
			0000 0x0 0x0 0x4 &mpic 0x7 0x1
			>;
		pcie@0 {
			reg = <0x0 0x0 0x0 0x0 0x0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <0x2000000 0x0 0xa0000000
				  0x2000000 0x0 0xa0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x10000>;
		};
	};
};