/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #ifndef _CORESIGHT_CORESIGHT_ETM_H #define _CORESIGHT_CORESIGHT_ETM_H #include #include "coresight-priv.h" /* * Device registers: * 0x000 - 0x2FC: Trace registers * 0x300 - 0x314: Management registers * 0x318 - 0xEFC: Trace registers * 0xF00: Management registers * 0xFA0 - 0xFA4: Trace registers * 0xFA8 - 0xFFC: Management registers */ /* Trace registers (0x000-0x2FC) */ /* Main control and configuration registers */ #define TRCPRGCTLR 0x004 #define TRCPROCSELR 0x008 #define TRCSTATR 0x00C #define TRCCONFIGR 0x010 #define TRCAUXCTLR 0x018 #define TRCEVENTCTL0R 0x020 #define TRCEVENTCTL1R 0x024 #define TRCSTALLCTLR 0x02C #define TRCTSCTLR 0x030 #define TRCSYNCPR 0x034 #define TRCCCCTLR 0x038 #define TRCBBCTLR 0x03C #define TRCTRACEIDR 0x040 #define TRCQCTLR 0x044 /* Filtering control registers */ #define TRCVICTLR 0x080 #define TRCVIIECTLR 0x084 #define TRCVISSCTLR 0x088 #define TRCVIPCSSCTLR 0x08C #define TRCVDCTLR 0x0A0 #define TRCVDSACCTLR 0x0A4 #define TRCVDARCCTLR 0x0A8 /* Derived resources registers */ #define TRCSEQEVRn(n) (0x100 + (n * 4)) #define TRCSEQRSTEVR 0x118 #define TRCSEQSTR 0x11C #define TRCEXTINSELR 0x120 #define TRCCNTRLDVRn(n) (0x140 + (n * 4)) #define TRCCNTCTLRn(n) (0x150 + (n * 4)) #define TRCCNTVRn(n) (0x160 + (n * 4)) /* ID registers */ #define TRCIDR8 0x180 #define TRCIDR9 0x184 #define TRCIDR10 0x188 #define TRCIDR11 0x18C #define TRCIDR12 0x190 #define TRCIDR13 0x194 #define TRCIMSPEC0 0x1C0 #define TRCIMSPECn(n) (0x1C0 + (n * 4)) #define TRCIDR0 0x1E0 #define TRCIDR1 0x1E4 #define TRCIDR2 0x1E8 #define TRCIDR3 0x1EC #define TRCIDR4 0x1F0 #define TRCIDR5 0x1F4 #define TRCIDR6 0x1F8 #define TRCIDR7 0x1FC /* Resource selection registers */ #define TRCRSCTLRn(n) (0x200 + (n * 4)) /* Single-shot comparator registers */ #define TRCSSCCRn(n) (0x280 + (n * 4)) #define TRCSSCSRn(n) (0x2A0 + (n * 4)) #define TRCSSPCICRn(n) (0x2C0 + (n * 4)) /* Management registers (0x300-0x314) */ #define TRCOSLAR 0x300 #define TRCOSLSR 0x304 #define TRCPDCR 0x310 #define TRCPDSR 0x314 /* Trace registers (0x318-0xEFC) */ /* Comparator registers */ #define TRCACVRn(n) (0x400 + (n * 8)) #define TRCACATRn(n) (0x480 + (n * 8)) #define TRCDVCVRn(n) (0x500 + (n * 16)) #define TRCDVCMRn(n) (0x580 + (n * 16)) #define TRCCIDCVRn(n) (0x600 + (n * 8)) #define TRCVMIDCVRn(n) (0x640 + (n * 8)) #define TRCCIDCCTLR0 0x680 #define TRCCIDCCTLR1 0x684 #define TRCVMIDCCTLR0 0x688 #define TRCVMIDCCTLR1 0x68C /* Management register (0xF00) */ /* Integration control registers */ #define TRCITCTRL 0xF00 /* Trace registers (0xFA0-0xFA4) */ /* Claim tag registers */ #define TRCCLAIMSET 0xFA0 #define TRCCLAIMCLR 0xFA4 /* Management registers (0xFA8-0xFFC) */ #define TRCDEVAFF0 0xFA8 #define TRCDEVAFF1 0xFAC #define TRCLAR 0xFB0 #define TRCLSR 0xFB4 #define TRCAUTHSTATUS 0xFB8 #define TRCDEVARCH 0xFBC #define TRCDEVID 0xFC8 #define TRCDEVTYPE 0xFCC #define TRCPIDR4 0xFD0 #define TRCPIDR5 0xFD4 #define TRCPIDR6 0xFD8 #define TRCPIDR7 0xFDC #define TRCPIDR0 0xFE0 #define TRCPIDR1 0xFE4 #define TRCPIDR2 0xFE8 #define TRCPIDR3 0xFEC #define TRCCIDR0 0xFF0 #define TRCCIDR1 0xFF4 #define TRCCIDR2 0xFF8 #define TRCCIDR3 0xFFC /* ETMv4 resources */ #define ETM_MAX_NR_PE 8 #define ETMv4_MAX_CNTR 4 #define ETM_MAX_SEQ_STATES 4 #define ETM_MAX_EXT_INP_SEL 4 #define ETM_MAX_EXT_INP 256 #define ETM_MAX_EXT_OUT 4 #define ETM_MAX_SINGLE_ADDR_CMP 16 #define ETM_MAX_ADDR_RANGE_CMP (ETM_MAX_SINGLE_ADDR_CMP / 2) #define ETM_MAX_DATA_VAL_CMP 8 #define ETMv4_MAX_CTXID_CMP 8 #define ETM_MAX_VMID_CMP 8 #define ETM_MAX_PE_CMP 8 #define ETM_MAX_RES_SEL 16 #define ETM_MAX_SS_CMP 8 #define ETM_ARCH_V4 0x40 #define ETMv4_SYNC_MASK 0x1F #define ETM_CYC_THRESHOLD_MASK 0xFFF #define ETMv4_EVENT_MASK 0xFF #define ETM_CNTR_MAX_VAL 0xFFFF #define ETM_TRACEID_MASK 0x3f /* ETMv4 programming modes */ #define ETM_MODE_EXCLUDE BIT(0) #define ETM_MODE_LOAD BIT(1) #define ETM_MODE_STORE BIT(2) #define ETM_MODE_LOAD_STORE BIT(3) #define ETM_MODE_BB BIT(4) #define ETMv4_MODE_CYCACC BIT(5) #define ETMv4_MODE_CTXID BIT(6) #define ETM_MODE_VMID BIT(7) #define ETM_MODE_COND(val) BMVAL(val, 8, 10) #define ETMv4_MODE_TIMESTAMP BIT(11) #define ETM_MODE_RETURNSTACK BIT(12) #define ETM_MODE_QELEM(val) BMVAL(val, 13, 14) #define ETM_MODE_DATA_TRACE_ADDR BIT(15) #define ETM_MODE_DATA_TRACE_VAL BIT(16) #define ETM_MODE_ISTALL BIT(17) #define ETM_MODE_DSTALL BIT(18) #define ETM_MODE_ATB_TRIGGER BIT(19) #define ETM_MODE_LPOVERRIDE BIT(20) #define ETM_MODE_ISTALL_EN BIT(21) #define ETM_MODE_DSTALL_EN BIT(22) #define ETM_MODE_INSTPRIO BIT(23) #define ETM_MODE_NOOVERFLOW BIT(24) #define ETM_MODE_TRACE_RESET BIT(25) #define ETM_MODE_TRACE_ERR BIT(26) #define ETM_MODE_VIEWINST_STARTSTOP BIT(27) #define ETMv4_MODE_ALL 0xFFFFFFF #define TRCSTATR_IDLE_BIT 0 /** * struct etm4_drvdata - specifics associated to an ETM component * @base: Memory mapped base address for this component. * @dev: The device entity associated to this component. * @csdev: Component vitals needed by the framework. * @spinlock: Only one at a time pls. * @cpu: The cpu this component is affined to. * @arch: ETM version number. * @enable: Is this ETM currently tracing. * @sticky_enable: true if ETM base configuration has been done. * @boot_enable:True if we should start tracing at boot time. * @os_unlock: True if access to management registers is allowed. * @nr_pe: The number of processing entity available for tracing. * @nr_pe_cmp: The number of processing entity comparator inputs that are * available for tracing. * @nr_addr_cmp:Number of pairs of address comparators available * as found in ETMIDR4 0-3. * @nr_cntr: Number of counters as found in ETMIDR5 bit 28-30. * @nr_ext_inp: Number of external input. * @numcidc: Number of contextID comparators. * @numvmidc: Number of VMID comparators. * @nrseqstate: The number of sequencer states that are implemented. * @nr_event: Indicates how many events the trace unit support. * @nr_resource:The number of resource selection pairs available for tracing. * @nr_ss_cmp: Number of single-shot comparator controls that are available. * @mode: Controls various modes supported by this ETM. * @trcid: value of the current ID for this component. * @trcid_size: Indicates the trace ID width. * @instrp0: Tracing of load and store instructions * as P0 elements is supported. * @trccond: If the trace unit supports conditional * instruction tracing. * @retstack: Indicates if the implementation supports a return stack. * @trc_error: Whether a trace unit can trace a system * error exception. * @atbtrig: If the implementation can support ATB triggers * @lpoverride: If the implementation can support low-power state over. * @pe_sel: Controls which PE to trace. * @cfg: Controls the tracing options. * @eventctrl0: Controls the tracing of arbitrary events. * @eventctrl1: Controls the behavior of the events that @event_ctrl0 selects. * @stallctl: If functionality that prevents trace unit buffer overflows * is available. * @sysstall: Does the system support stall control of the PE? * @nooverflow: Indicate if overflow prevention is supported. * @stall_ctrl: Enables trace unit functionality that prevents trace * unit buffer overflows. * @ts_size: Global timestamp size field. * @ts_ctrl: Controls the insertion of global timestamps in the * trace streams. * @syncpr: Indicates if an implementation has a fixed * synchronization period. * @syncfreq: Controls how often trace synchronization requests occur. * @trccci: Indicates if the trace unit supports cycle counting * for instruction. * @ccsize: Indicates the size of the cycle counter in bits. * @ccitmin: minimum value that can be programmed in * the TRCCCCTLR register. * @ccctlr: Sets the threshold value for cycle counting. * @trcbb: Indicates if the trace unit supports branch broadcast tracing. * @q_support: Q element support characteristics. * @vinst_ctrl: Controls instruction trace filtering. * @viiectlr: Set or read, the address range comparators. * @vissctlr: Set, or read, the single address comparators that control the * ViewInst start-stop logic. * @vipcssctlr: Set, or read, which PE comparator inputs can control the * ViewInst start-stop logic. * @seq_idx: Sequencor index selector. * @seq_ctrl: Control for the sequencer state transition control register. * @seq_rst: Moves the sequencer to state 0 when a programmed event occurs. * @seq_state: Set, or read the sequencer state. * @cntr_idx: Counter index seletor. * @cntrldvr: Sets or returns the reload count value for a counter. * @cntr_ctrl: Controls the operation of a counter. * @cntr_val: Sets or returns the value for a counter. * @res_idx: Resource index selector. * @res_ctrl: Controls the selection of the resources in the trace unit. * @ss_ctrl: Controls the corresponding single-shot comparator resource. * @ss_status: The status of the corresponding single-shot comparator. * @ss_pe_cmp: Selects the PE comparator inputs for Single-shot control. * @addr_idx: Address comparator index selector. * @addr_val: Value for address comparator. * @addr_acc: Address comparator access type. * @addr_type: Current status of the comparator register. * @ctxid_idx: Context ID index selector. * @ctxid_size: Size of the context ID field to consider. * @ctxid_pid: Value of the context ID comparator. * @ctxid_vpid: Virtual PID seen by users if PID namespace is enabled, otherwise * the same value of ctxid_pid. * @ctxid_mask0:Context ID comparator mask for comparator 0-3. * @ctxid_mask1:Context ID comparator mask for comparator 4-7. * @vmid_idx: VM ID index selector. * @vmid_size: Size of the VM ID comparator to consider. * @vmid_val: Value of the VM ID comparator. * @vmid_mask0: VM ID comparator mask for comparator 0-3. * @vmid_mask1: VM ID comparator mask for comparator 4-7. * @s_ex_level: In secure state, indicates whether instruction tracing is * supported for the corresponding Exception level. * @ns_ex_level:In non-secure state, indicates whether instruction tracing is * supported for the corresponding Exception level. * @ext_inp: External input selection. */ struct etmv4_drvdata { void __iomem *base; struct device *dev; struct coresight_device *csdev; spinlock_t spinlock; int cpu; u8 arch; bool enable; bool sticky_enable; bool boot_enable; bool os_unlock; u8 nr_pe; u8 nr_pe_cmp; u8 nr_addr_cmp; u8 nr_cntr; u8 nr_ext_inp; u8 numcidc; u8 numvmidc; u8 nrseqstate; u8 nr_event; u8 nr_resource; u8 nr_ss_cmp; u32 mode; u8 trcid; u8 trcid_size; bool instrp0; bool trccond; bool retstack; bool trc_error; bool atbtrig; bool lpoverride; u32 pe_sel; u32 cfg; u32 eventctrl0; u32 eventctrl1; bool stallctl; bool sysstall; bool nooverflow; u32 stall_ctrl; u8 ts_size; u32 ts_ctrl; bool syncpr; u32 syncfreq; bool trccci; u8 ccsize; u8 ccitmin; u32 ccctlr; bool trcbb; u32 bb_ctrl; bool q_support; u32 vinst_ctrl; u32 viiectlr; u32 vissctlr; u32 vipcssctlr; u8 seq_idx; u32 seq_ctrl[ETM_MAX_SEQ_STATES]; u32 seq_rst; u32 seq_state; u8 cntr_idx; u32 cntrldvr[ETMv4_MAX_CNTR]; u32 cntr_ctrl[ETMv4_MAX_CNTR]; u32 cntr_val[ETMv4_MAX_CNTR]; u8 res_idx; u32 res_ctrl[ETM_MAX_RES_SEL]; u32 ss_ctrl[ETM_MAX_SS_CMP]; u32 ss_status[ETM_MAX_SS_CMP]; u32 ss_pe_cmp[ETM_MAX_SS_CMP]; u8 addr_idx; u64 addr_val[ETM_MAX_SINGLE_ADDR_CMP]; u64 addr_acc[ETM_MAX_SINGLE_ADDR_CMP]; u8 addr_type[ETM_MAX_SINGLE_ADDR_CMP]; u8 ctxid_idx; u8 ctxid_size; u64 ctxid_pid[ETMv4_MAX_CTXID_CMP]; u64 ctxid_vpid[ETMv4_MAX_CTXID_CMP]; u32 ctxid_mask0; u32 ctxid_mask1; u8 vmid_idx; u8 vmid_size; u64 vmid_val[ETM_MAX_VMID_CMP]; u32 vmid_mask0; u32 vmid_mask1; u8 s_ex_level; u8 ns_ex_level; u32 ext_inp; }; /* Address comparator access types */ enum etm_addr_acctype { ETM_INSTR_ADDR, ETM_DATA_LOAD_ADDR, ETM_DATA_STORE_ADDR, ETM_DATA_LOAD_STORE_ADDR, }; /* Address comparator context types */ enum etm_addr_ctxtype { ETM_CTX_NONE, ETM_CTX_CTXID, ETM_CTX_VMID, ETM_CTX_CTXID_VMID, }; enum etm_addr_type { ETM_ADDR_TYPE_NONE, ETM_ADDR_TYPE_SINGLE, ETM_ADDR_TYPE_RANGE, ETM_ADDR_TYPE_START, ETM_ADDR_TYPE_STOP, }; #endif