/* * Copyright (c) 2012-2014 Qualcomm Atheros, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #include #include #include #include "wil6210.h" static bool use_msi = true; module_param(use_msi, bool, S_IRUGO); MODULE_PARM_DESC(use_msi, " Use MSI interrupt, default - true"); static void wil_set_capabilities(struct wil6210_priv *wil) { u32 rev_id = wil_r(wil, RGF_USER_JTAG_DEV_ID); bitmap_zero(wil->hw_capabilities, hw_capability_last); switch (rev_id) { case JTAG_DEV_ID_SPARROW_B0: wil->hw_name = "Sparrow B0"; wil->hw_version = HW_VER_SPARROW_B0; break; default: wil_err(wil, "Unknown board hardware 0x%08x\n", rev_id); wil->hw_name = "Unknown"; wil->hw_version = HW_VER_UNKNOWN; } wil_info(wil, "Board hardware is %s\n", wil->hw_name); } void wil_disable_irq(struct wil6210_priv *wil) { disable_irq(wil->pdev->irq); } void wil_enable_irq(struct wil6210_priv *wil) { enable_irq(wil->pdev->irq); } /* Bus ops */ static int wil_if_pcie_enable(struct wil6210_priv *wil) { struct pci_dev *pdev = wil->pdev; int rc; /* on platforms with buggy ACPI, pdev->msi_enabled may be set to * allow pci_enable_device to work. This indicates INTx was not routed * and only MSI should be used */ int msi_only = pdev->msi_enabled; bool _use_msi = use_msi; wil_dbg_misc(wil, "%s()\n", __func__); pdev->msi_enabled = 0; pci_set_master(pdev); wil_dbg_misc(wil, "Setup %s interrupt\n", use_msi ? "MSI" : "INTx"); if (use_msi && pci_enable_msi(pdev)) { wil_err(wil, "pci_enable_msi failed, use INTx\n"); _use_msi = false; } if (!_use_msi && msi_only) { wil_err(wil, "Interrupt pin not routed, unable to use INTx\n"); rc = -ENODEV; goto stop_master; } rc = wil6210_init_irq(wil, pdev->irq, _use_msi); if (rc) goto stop_master; /* need reset here to obtain MAC */ mutex_lock(&wil->mutex); rc = wil_reset(wil, false); mutex_unlock(&wil->mutex); if (rc) goto release_irq; return 0; release_irq: wil6210_fini_irq(wil, pdev->irq); /* safe to call if no MSI */ pci_disable_msi(pdev); stop_master: pci_clear_master(pdev); return rc; } static int wil_if_pcie_disable(struct wil6210_priv *wil) { struct pci_dev *pdev = wil->pdev; wil_dbg_misc(wil, "%s()\n", __func__); pci_clear_master(pdev); /* disable and release IRQ */ wil6210_fini_irq(wil, pdev->irq); /* safe to call if no MSI */ pci_disable_msi(pdev); /* TODO: disable HW */ return 0; } static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct wil6210_priv *wil; struct device *dev = &pdev->dev; int rc; /* check HW */ dev_info(&pdev->dev, WIL_NAME " device found [%04x:%04x] (rev %x)\n", (int)pdev->vendor, (int)pdev->device, (int)pdev->revision); if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) { dev_err(&pdev->dev, "Not " WIL_NAME "? " "BAR0 size is %lu while expecting %lu\n", (ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE); return -ENODEV; } wil = wil_if_alloc(dev); if (IS_ERR(wil)) { rc = (int)PTR_ERR(wil); dev_err(dev, "wil_if_alloc failed: %d\n", rc); return rc; } wil->pdev = pdev; pci_set_drvdata(pdev, wil); /* rollback to if_free */ wil->platform_handle = wil_platform_init(&pdev->dev, &wil->platform_ops); if (!wil->platform_handle) { rc = -ENODEV; wil_err(wil, "wil_platform_init failed\n"); goto if_free; } /* rollback to err_plat */ rc = pci_enable_device(pdev); if (rc) { wil_err(wil, "pci_enable_device failed, retry with MSI only\n"); /* Work around for platforms that can't allocate IRQ: * retry with MSI only */ pdev->msi_enabled = 1; rc = pci_enable_device(pdev); } if (rc) { wil_err(wil, "pci_enable_device failed, even with MSI only\n"); goto err_plat; } /* rollback to err_disable_pdev */ rc = pci_request_region(pdev, 0, WIL_NAME); if (rc) { wil_err(wil, "pci_request_region failed\n"); goto err_disable_pdev; } /* rollback to err_release_reg */ wil->csr = pci_ioremap_bar(pdev, 0); if (!wil->csr) { wil_err(wil, "pci_ioremap_bar failed\n"); rc = -ENODEV; goto err_release_reg; } /* rollback to err_iounmap */ wil_info(wil, "CSR at %pR -> 0x%p\n", &pdev->resource[0], wil->csr); wil_set_capabilities(wil); wil6210_clear_irq(wil); /* FW should raise IRQ when ready */ rc = wil_if_pcie_enable(wil); if (rc) { wil_err(wil, "Enable device failed\n"); goto err_iounmap; } /* rollback to bus_disable */ rc = wil_if_add(wil); if (rc) { wil_err(wil, "wil_if_add failed: %d\n", rc); goto bus_disable; } wil6210_debugfs_init(wil); return 0; bus_disable: wil_if_pcie_disable(wil); err_iounmap: pci_iounmap(pdev, wil->csr); err_release_reg: pci_release_region(pdev, 0); err_disable_pdev: pci_disable_device(pdev); err_plat: if (wil->platform_ops.uninit) wil->platform_ops.uninit(wil->platform_handle); if_free: wil_if_free(wil); return rc; } static void wil_pcie_remove(struct pci_dev *pdev) { struct wil6210_priv *wil = pci_get_drvdata(pdev); void __iomem *csr = wil->csr; wil_dbg_misc(wil, "%s()\n", __func__); wil6210_debugfs_remove(wil); wil_if_remove(wil); wil_if_pcie_disable(wil); pci_iounmap(pdev, csr); pci_release_region(pdev, 0); pci_disable_device(pdev); if (wil->platform_ops.uninit) wil->platform_ops.uninit(wil->platform_handle); wil_if_free(wil); } static const struct pci_device_id wil6210_pcie_ids[] = { { PCI_DEVICE(0x1ae9, 0x0310) }, { PCI_DEVICE(0x1ae9, 0x0302) }, /* same as above, firmware broken */ { /* end: all zeroes */ }, }; MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids); #ifdef CONFIG_PM #ifdef CONFIG_PM_SLEEP static int wil6210_suspend(struct device *dev, bool is_runtime) { int rc = 0; struct pci_dev *pdev = to_pci_dev(dev); struct wil6210_priv *wil = pci_get_drvdata(pdev); wil_dbg_pm(wil, "%s(%s)\n", __func__, is_runtime ? "runtime" : "system"); rc = wil_can_suspend(wil, is_runtime); if (rc) goto out; rc = wil_suspend(wil, is_runtime); if (rc) goto out; /* TODO: how do I bring card in low power state? */ /* disable bus mastering */ pci_clear_master(pdev); /* PCI will call pci_save_state(pdev) and pci_prepare_to_sleep(pdev) */ out: return rc; } static int wil6210_resume(struct device *dev, bool is_runtime) { int rc = 0; struct pci_dev *pdev = to_pci_dev(dev); struct wil6210_priv *wil = pci_get_drvdata(pdev); wil_dbg_pm(wil, "%s(%s)\n", __func__, is_runtime ? "runtime" : "system"); /* allow master */ pci_set_master(pdev); rc = wil_resume(wil, is_runtime); if (rc) pci_clear_master(pdev); return rc; } static int wil6210_pm_suspend(struct device *dev) { return wil6210_suspend(dev, false); } static int wil6210_pm_resume(struct device *dev) { return wil6210_resume(dev, false); } #endif /* CONFIG_PM_SLEEP */ #endif /* CONFIG_PM */ static const struct dev_pm_ops wil6210_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(wil6210_pm_suspend, wil6210_pm_resume) }; static struct pci_driver wil6210_driver = { .probe = wil_pcie_probe, .remove = wil_pcie_remove, .id_table = wil6210_pcie_ids, .name = WIL_NAME, .driver = { .pm = &wil6210_pm_ops, }, }; static int __init wil6210_driver_init(void) { int rc; rc = wil_platform_modinit(); if (rc) return rc; rc = pci_register_driver(&wil6210_driver); if (rc) wil_platform_modexit(); return rc; } module_init(wil6210_driver_init); static void __exit wil6210_driver_exit(void) { pci_unregister_driver(&wil6210_driver); wil_platform_modexit(); } module_exit(wil6210_driver_exit); MODULE_LICENSE("Dual BSD/GPL"); MODULE_AUTHOR("Qualcomm Atheros "); MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");