/* * Copyright (c) 2020-2023 Project CHIP Authors * Copyright (c) 2020 Google LLC. * All rights reserved. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /** * @file * Example project configuration file for CHIP. * * This is a place to put application or project-specific overrides * to the default configuration values for general CHIP features. * */ #pragma once // Use hard-coded test certificates already embedded in generic chip code => set it to 0 // Use real/development certificates => set it to 1 + file the provisioning section from // the internal flash #ifndef CONFIG_CHIP_LOAD_REAL_FACTORY_DATA #define CONFIG_CHIP_LOAD_REAL_FACTORY_DATA 0 #endif #if CONFIG_CHIP_LOAD_REAL_FACTORY_DATA // VID/PID for product => will be used by Basic Information Cluster #define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID 0x1037 #define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID 0xA401 // Set the following define to use the Certification Declaration from below and not use it stored in factory data section #ifndef CHIP_USE_DEVICE_CONFIG_CERTIFICATION_DECLARATION #define CHIP_USE_DEVICE_CONFIG_CERTIFICATION_DECLARATION 0 #endif #ifndef CHIP_DEVICE_CONFIG_CERTIFICATION_DECLARATION //-> format_version = 1 //-> vendor_id = 0x1037 //-> product_id_array = [ 0xA401 ] //-> device_type_id = 0x0015 //-> certificate_id = "ZIG20142ZB330003-24" //-> security_level = 0 //-> security_information = 0 //-> version_number = 0x2694 //-> certification_type = 1 //-> dac_origin_vendor_id is not present //-> dac_origin_product_id is not present #define CHIP_DEVICE_CONFIG_CERTIFICATION_DECLARATION \ { \ 0x30, 0x81, 0xe7, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x07, 0x02, 0xa0, 0x81, 0xd9, 0x30, 0x81, 0xd6, \ 0x02, 0x01, 0x03, 0x31, 0x0d, 0x30, 0x0b, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x30, \ 0x44, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x07, 0x01, 0xa0, 0x37, 0x04, 0x35, 0x15, 0x24, 0x00, \ 0x01, 0x25, 0x01, 0x37, 0x10, 0x36, 0x02, 0x05, 0x01, 0xa4, 0x18, 0x24, 0x03, 0x15, 0x2c, 0x04, 0x13, 0x5a, 0x49, \ 0x47, 0x32, 0x30, 0x31, 0x34, 0x32, 0x5a, 0x42, 0x33, 0x33, 0x30, 0x30, 0x30, 0x33, 0x2d, 0x32, 0x34, 0x24, 0x05, \ 0x00, 0x24, 0x06, 0x00, 0x25, 0x07, 0x76, 0x98, 0x24, 0x08, 0x01, 0x18, 0x31, 0x7c, 0x30, 0x7a, 0x02, 0x01, 0x03, \ 0x80, 0x14, 0x62, 0xfa, 0x82, 0x33, 0x59, 0xac, 0xfa, 0xa9, 0x96, 0x3e, 0x1c, 0xfa, 0x14, 0x0a, 0xdd, 0xf5, 0x04, \ 0xf3, 0x71, 0x60, 0x30, 0x0b, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x30, 0x0a, 0x06, \ 0x08, 0x2a, 0x86, 0x48, 0xce, 0x3d, 0x04, 0x03, 0x02, 0x04, 0x46, 0x30, 0x44, 0x02, 0x20, 0x12, 0xec, 0x79, 0xdc, \ 0x03, 0xd3, 0x4f, 0xf9, 0x79, 0xef, 0x56, 0x4e, 0x5b, 0x4f, 0xfc, 0xf5, 0xb1, 0x5a, 0xdb, 0xdf, 0xd9, 0xf8, 0x47, \ 0xff, 0x81, 0xc3, 0x82, 0x2f, 0xa3, 0x2b, 0xb8, 0x3f, 0x02, 0x20, 0x53, 0x0d, 0x5d, 0xbd, 0xc6, 0xa4, 0x80, 0x67, \ 0x1f, 0x10, 0xfb, 0xab, 0x00, 0x08, 0xee, 0x15, 0xa0, 0x6c, 0x40, 0x97, 0x55, 0x80, 0x28, 0x3e, 0xf3, 0xd9, 0x61, \ 0x1f, 0x5b, 0x1d, 0x51, 0x02 \ } // All remaining data will be pulled from the provisioning region of flash. #endif #else /** * CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID * * 0xFFF1: Test vendor. */ #define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID 0xFFF1 /** * CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID * */ #define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID 0x8006 // Use a default setup PIN code if one hasn't been provisioned in flash. #ifndef CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE #define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE 20202021 #endif #ifndef CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR #define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR 0xF00 #endif // Use a default pairing code if one hasn't been provisioned in flash. #define CHIP_DEVICE_CONFIG_USE_TEST_PAIRING_CODE "CHIPUS" /** * CHIP_DEVICE_CONFIG_TEST_SERIAL_NUMBER * * Enables the use of a hard-coded default serial number if none * is found in CHIP NV storage. */ #define CHIP_DEVICE_CONFIG_TEST_SERIAL_NUMBER "TEST_SN" #endif // CONFIG_CHIP_LOAD_REAL_FACTORY_DATA /** * CHIP_DEVICE_CONFIG_DEVICE_HARDWARE_VERSION * * The hardware version number assigned to device or product by the device vendor. This * number is scoped to the device product id, and typically corresponds to a revision of the * physical device, a change to its packaging, and/or a change to its marketing presentation. * This value is generally *not* incremented for device software versions. */ #define CHIP_DEVICE_CONFIG_DEVICE_HARDWARE_VERSION 100 #ifndef CHIP_DEVICE_CONFIG_DEFAULT_DEVICE_HARDWARE_VERSION_STRING #define CHIP_DEVICE_CONFIG_DEFAULT_DEVICE_HARDWARE_VERSION_STRING "v0.1.0" #endif /** * CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING * * A string identifying the software version running on the device. * CHIP currently expects the software version to be in the format * {MAJOR_VERSION}.0d{MINOR_VERSION} */ #ifndef CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING #define CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING NXP_CONFIG_DEVICE_SOFTWARE_VERSION_STRING #endif #ifndef CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION #define CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION NXP_CONFIG_DEVICE_SOFTWARE_VERSION #endif #ifndef CHIP_DEVICE_CONFIG_DEVICE_VENDOR_NAME #define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_NAME "NXP Semiconductors" #endif #ifndef CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_NAME #define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_NAME "NXP Demo App" #endif /** * CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_TIMEOUT * * The amount of time in miliseconds after which BLE should change his advertisements * from fast interval to slow interval. * * 30000 (30 secondes). */ #define CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_TIMEOUT (30 * 1000) /** * CHIP_DEVICE_CONFIG_BLE_ADVERTISING_TIMEOUT * * The amount of time in miliseconds after which BLE advertisement should be disabled, counting * from the moment of slow advertisement commencement. * * Defaults to 9000000 (15 minutes). */ #define CHIP_DEVICE_CONFIG_BLE_ADVERTISING_TIMEOUT (15 * 60 * 1000) /** * CONFIG_CHIP_NFC_COMMISSIONING, CHIP_DEVICE_CONFIG_ENABLE_NFC * * NFC commissioning is not supported on K32W1 */ #define CONFIG_CHIP_NFC_COMMISSIONING 0 #define CHIP_DEVICE_CONFIG_ENABLE_NFC 0 /** * @def CHIP_CONFIG_MAX_FABRICS * * @brief * Maximum number of fabrics the device can participate in. Each fabric can * provision the device with its unique operational credentials and manage * its own access control lists. */ #define CHIP_CONFIG_MAX_FABRICS 5 // 5 is the minimum number of supported fabrics #define CHIP_DEVICE_CONFIG_ENABLE_SED 1 /** * @def CHIP_DEVICE_CONFIG_KVS_WEAR_STATS * * @brief Toggle support for key value store wear stats on or off. */ #define CHIP_DEVICE_CONFIG_KVS_WEAR_STATS 0 /** * @def CHIP_IM_MAX_NUM_COMMAND_HANDLER * * @brief Defines the maximum number of CommandHandler, limits the number of active commands transactions on server. */ #define CHIP_IM_MAX_NUM_COMMAND_HANDLER 2 /** * @def CHIP_IM_MAX_NUM_WRITE_HANDLER * * @brief Defines the maximum number of WriteHandler, limits the number of active write transactions on server. */ #define CHIP_IM_MAX_NUM_WRITE_HANDLER 2 /** * CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE * * For a development build, set the default importance of events to be logged as Debug. * Since debug is the lowest importance level, this means all standard, critical, info and * debug importance level vi events get logged. */ #if BUILD_RELEASE #define CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE chip::Profiles::DataManagement::Production #else #define CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE chip::Profiles::DataManagement::Debug #endif // BUILD_RELEASE #define CHIP_DEVICE_CONFIG_ENABLE_EXTENDED_DISCOVERY 1 #if CONFIG_DIAG_LOGS_DEMO #define CHIP_CONFIG_ENABLE_BDX_LOG_TRANSFER 1 #define CHIP_DEVICE_CONFIG_MAX_DIAG_LOG_SIZE 1024 #endif