/*
 * This file is used to set the pins for the SPI for Custom boards
 * The SPI pins are defined in the file
 *
 *  !!!! MODIFY THIS FILE TO THE CORRECT PINS !!!!
 */

#ifndef _CUSTOM_BOARD_H_
#define _CUSTOM_BOARD_H_

#define WAKE_INDICATOR_PIN PIN(D, 2)
#ifdef RS911X_WIFI
// SPI ports and pins
#define EUS1MOSI_PORT gpioPortC
#define EUS1MOSI_PIN 1
#define EUS1MISO_PORT gpioPortC
#define EUS1MISO_PIN 2
#define EUS1SCLK_PORT gpioPortC
#define EUS1SCLK_PIN 3
#define EUS1CS_PORT gpioPortC
#define EUS1CS_PIN 0

#define MY_USART EUSART1
#define MY_USART_CLOCK cmuClock_EUSART1
#define MY_USART_TX_SIGNAL dmadrvPeripheralSignal_EUSART1_TXBL
#define MY_USART_RX_SIGNAL dmadrvPeripheralSignal_EUSART1_RXDATAV

#define WFX_RESET_PIN PIN(A, 6)
#define WFX_INTERRUPT_PIN PIN(A, 7)
#ifdef EXP_BOARD
#define WFX_SLEEP_CONFIRM_PIN PIN(D, 2) /* Expansion header pin7 */
#else
#define WFX_SLEEP_CONFIRM_PIN PIN(A, 5)
#endif /* EXP_BOARD */
#define SL_WFX_HOST_PINOUT_SPI_IRQ 5

#else /* WF200 */

#define PIN_OUT_SET 1
#define PIN_OUT_CLEAR 0

#define MY_USART USART0
#define MY_USART_CLOCK cmuClock_USART0
#define MY_USART_TX_SIGNAL dmadrvPeripheralSignal_USART0_TXBL
#define MY_USART_RX_SIGNAL dmadrvPeripheralSignal_USART0_RXDATAV

#define SL_WFX_HOST_PINOUT_RESET_PORT gpioPortA
#define SL_WFX_HOST_PINOUT_RESET_PIN 5
#define SL_WFX_HOST_PINOUT_SPI_WIRQ_PORT gpioPortA /* SPI IRQ port */
#define SL_WFX_HOST_PINOUT_SPI_WIRQ_PIN 8          /* SPI IRQ pin */
#define SL_WFX_HOST_PINOUT_WUP_PORT gpioPortB
#define SL_WFX_HOST_PINOUT_WUP_PIN 5

#define SL_WFX_HOST_PINOUT_SPI_TX_PORT gpioPortC
#define SL_WFX_HOST_PINOUT_SPI_TX_PIN 1
#define SL_WFX_HOST_PINOUT_SPI_TX_LOC 1

#define SL_WFX_HOST_PINOUT_SPI_RX_PORT gpioPortC
#define SL_WFX_HOST_PINOUT_SPI_RX_PIN 2
#define SL_WFX_HOST_PINOUT_SPI_RX_LOC 1

#define SL_WFX_HOST_PINOUT_SPI_CLK_PORT gpioPortC
#define SL_WFX_HOST_PINOUT_SPI_CLK_PIN 3
#define SL_WFX_HOST_PINOUT_SPI_CLK_LOC 1

#define SL_WFX_HOST_PINOUT_SPI_CS_PORT gpioPortC
#define SL_WFX_HOST_PINOUT_SPI_CS_PIN 0
#define SL_WFX_HOST_PINOUT_SPI_CS_LOC 1

#endif /* WF200/9116 */
#endif /* _CUSTOM_BOARD_H_ */