pev(1) Qualcomm Atheros Open Powerline Toolkit pev(1)
NAME
pev - Qualcomm Atheros Plug-in Electric Vehicle Emulator
SYNOPSIS
pev [options]
DESCRIPTION
Emulate the PEV part of the HomePlug AV Signal Level Attentuation Characterization (SLAC) protocol where a PEV is a
"Plug-in Electric Vehicle" and an EVSE is an "Electric Vehicle Supply Equipment" or charging station. This program will
remain active until it detects and connects to an available EVSE-HLE on the powerline network. Once connected, it
charges a virtual vehicle for about 10 seconds then disconnects and terminates. See the HomePlug Green PHY Specification
Release Version 1.1 for more information on this protocol.
Signal Level Attenuation Characterization (SLAC) enables a station to measure the signal level of its transmission at
other stations in the network. It is designed for automotive applications where there are multiple plug-in vehicle
(PEVs) and electric vehicle supply equipment (EVSE) on the network. The PEV signal level is measured at multiple EVSEs
to determine which EVSE the PEV is actually plugged into. The process leading to this determination is called "Green PHY
PEV-EVSE Association" (GreenPPEA).
This program is part of the Qualcomm Atheros Powerline Toolkit. See the plc man page for an overview and installation
instructions.
OPTIONS
-c Print the PEV-HLE configuration profile on stdout. The configuration profile specifies program defaults in a for‐
mat that you, as a user, can edit and save. Use options -p and -s to read named profiles and sections.
-d Print the contents of the PEV-HLE session variable on stdout. The session variable is an program data structure
that stores information passed between the PEV-HLE and EVSE-HLE during SLAC association. This option is used to
inspect and veriify information relevant to the process. If the program was compiled with variable SLAC_DEBUG
defined then this option also prints MME message fields before messages are sent or after they are received.
Interested parties can follow along in the source code.
-i Select the host Ethernet interface. All requests are sent via this host interface and only reponses received via
this host interface are recognized. The default interface is eth1 because most people use eth0 as their principle
network connection; however, if environment string "PLC" is defined then it takes precedence over the default
interface. This option then takes precedence over either default.
-p profile
The PEV-HLE configuration profile name. The program will supply default values for missing profile elements. See
the example profile shown below. The default profile name is "pev.ini".
-q Enter quiet mode. Progress messages are suppressed.
-s section
The configuration profile section name. The program will supply default values for missing configuration profile
elements. See the example profile shown below. The default section name is "default".
-v Enter verbose mode. All Etherenet frames sent or received by the program are displayed on stdout.
-?, --help
Print program help summary on stdout. This option takes precedence over other options on the command line.
-!, --version
Print program version information on stdout. This option takes precedence over other options on the command line.
Use this option when sending screen dumps to Atheros Technical Support so that they know exactly which version of
the Linux Toolkit you are using.
PROFILES
The default configuration profile for this program is "pev.ini". The default profile section is "default". Users may
create addition profiles and reference them with option -p or add additional sections to an existing profiles and refer‐
ence them with option -s.
Attenuation Theshold
The average attenuation above which the PEV will not connect to an EVSE. The default value is 10db.
MSound Pause
The time in milliseconds between each MSound sent by the PEV-HLE to the EVSE-HLE. Sending MSounds too frequently
overloads the EVSE-PLC. Sending them too infrequently wastes time. This value is derived and does not appear in
the HPGP specification. The default pause is 10 milliseconds.
Vehicle Identifier
Vehicle identification. The 17-byte Vehicle Identification Number to be placed in CM_MNBC_SOUND.IND.SenderID.
This value is not used but is can be changed here so that the field is easy to spot within network message traces.
Network Membership Key
The 16-byte Network Memberhip Key (NMK) for the PEV-PLC device. This program uses CM_SET_KEY to sets the PEV-PLC
NMK to this value after disconnecting. The default value is the key for Network Password "HomePlugAV".
Network Identifier
The 7-byte Network Identifier (NID) for the PEV-PLC device. This program uses CM_SET_KEY to sets the PEV-PLC NID
to this value after disconnecting. The default value is the same as that for Network Password "HomePlugAV".
REFERENCES
See the Qualcomm Atheros AR7420, QCA6410 IEEE 1901, HomePlug AV and QCA7000 HomePlug Green PHY PLC Chipset Programmer''s
Guide or the HomePlug Green PHY Specification Release Version 1.1 for more information on this protocol.
EXAMPLES
The following example starts a PEV session on interface eth0 and wait up to 2000 milliseconds (or 2 seconds) for the EVSE
to respond during any given exchange.
# pev -ieth0 -w2000
The default PEV-HLE configuration profile, "pev.ini", looks something like this but it can be changed using a normal text
editor. Use option -P to produce a template profile, if one is needed.
# file: pev.ini
# ====================================================================
# PEV-HLE initialization;
# --------------------------------------------------------------------
[default]
attenuation threshold = 10
msound pause = 10
vehicle identifier = AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
network membership key = 50D3E4933F855B7040784DF815AA8DB7
network identifier = B0F2E695666B03
SEE ALSO
plc(1), evse(1)
CREDITS
Charles Maier <cmaier@qca.qualcomm.com>
open-plc-utils-0.0.3 Mar 2014 pev(1)