ttysend(1)                                   Qualcomm Atheros Open Powerline Toolkit                                  ttysend(1)

NAME
       ttysend - Serial Line Rate Tester (Send)

SYNOPSIS
       ttysend [options] [<stdin]

DESCRIPTION
       Send  data  to  a serial device.  The primary purpose of this program is to send data over a serial port that can then be
       received with the ttyrecv utility.

       The ttysend program exits when either one of the following conditions are met:
           1.  The file specified on the command line (see -f) is sent in its entirety.
           2.  The send time specified on the command line (see -t) has elapsed.

       This program is part of the Qualcomm Atheros Powerline Toolkit.  See the AMP man page for an  overview  and  installation
       instructions.

COMMENTS
       This program does not yet support Windows platforms.

OPTIONS
       -f file
              The  file  to  send.   If  this option is not specified, the values 0x00 to 0xFF are sent in a loop.  Instead of a
              filename, a '-' may be specified.  This is similar to the tar utility, and instructs ttysend to read from standard
              input.

       -l file
              The serial port file to send data to.  The default is /dev/ttyS0.

       -s speed
              The  serial  baud rate.  Supported baud rates are 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
              9600, 19200, 38400, 57600, 115200, 230400, 460800, 500000 and 921600.

       -t time
              Transmit for a maximum of time seconds.  The default is 15 seconds.

       -?,--help
              Print program help summary on stdout.  This option takes precedence over other options on the command line.

       -?,--version
              Print program version information on stdout.  This option takes precedence over other options on the command line.
              Use  this option when sending screen dumps to Atheros Technical Support so that they know exactly which version of
              the Linux Toolkit you are using.

EXAMPLES
       None.

SEE ALSO
       amp(1), int6kuart(1), ttyrecv(1)

CREDITS
        Nathaniel Houghton <nhoughto@qca.qualcomm.com>

open-plc-utils-0.0.3                                        Mar 2014                                                  ttysend(1)