/*====================================================================*
 *
 *   Copyright (c) 2013 Qualcomm Atheros, Inc.
 *
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or
 *   without modification, are permitted (subject to the limitations
 *   in the disclaimer below) provided that the following conditions
 *   are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials
 *     provided with the distribution.
 *
 *   * Neither the name of Qualcomm Atheros nor the names of
 *     its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written
 *     permission.
 *
 *   NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
 *   GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE
 *   COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
 *   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 *   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 *   PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
 *   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *   NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 *   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 *   OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 *   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *--------------------------------------------------------------------*/

/*====================================================================*
 *
 *   signed WriteCFG (struct plc * plc);
 *
 *   plc.h
 *
 *   This plugin for program plc writes the contents of an SDRAM
 *   confirmation file to a device using a VS_SET_SDRAM message; the
 *   CFG file in struct plc must be opened before this function is
 *   called; the bootloader must be running for this to work;
 *
 *   the VS_SET_SDRAM message is recognized by the INT600 BootLoader
 *   only; the INT6400 BootLoader recognizes it but does nothing with
 *   it;
 *
 *
 *   Contributor(s):
 *      Charles Maier
 *
 *--------------------------------------------------------------------*/

#ifndef WRITECFG_SOURCE
#define WRITECFG_SOURCE

#include <stdint.h>
#include <unistd.h>
#include <memory.h>

#include "../plc/plc.h"
#include "../tools/memory.h"
#include "../tools/error.h"
#include "../tools/files.h"
#include "../ram/sdram.h"

int WriteCFG (struct plc * plc)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_set_sdram_request
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		struct config_ram config_ram;
		uint32_t CHECKSUM;
	}
	* request = (struct vs_set_sdram_request *) (message);
	struct __packed vs_set_sdram_confirm
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MSTATUS;
	}
	* confirm = (struct vs_set_sdram_confirm *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	Request (plc, "Write Configuration Applet from %s", plc->CFG.name);
	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_SET_SDRAM | MMTYPE_REQ));
	plc->packetsize = (ETHER_MIN_LEN - ETHER_CRC_LEN);
	if (lseek (plc->CFG.file, 0, SEEK_SET))
	{
		error (PLC_EXIT (plc), errno, FILE_CANTHOME, plc->CFG.name);
		return (-1);
	}
	if (read (plc->CFG.file, &request->config_ram, sizeof (struct config_ram)) != sizeof (struct config_ram))
	{
		error (PLC_EXIT (plc), errno, FILE_CANTREAD, plc->CFG.name);
		return (-1);
	}
	if (read (plc->CFG.file, &request->CHECKSUM, sizeof (request->CHECKSUM)) != sizeof (request->CHECKSUM))
	{
		error (PLC_EXIT (plc), errno, "can't read %s checksum", plc->CFG.name);
		return (-1);
	}
	if (SendMME (plc) <= 0)
	{
		error (PLC_EXIT (plc), errno, CHANNEL_CANTSEND);
		return (-1);
	}
	if (ReadMME (plc, 0, (VS_SET_SDRAM | MMTYPE_CNF)) <= 0)
	{
		error (PLC_EXIT (plc), errno, CHANNEL_CANTREAD);
		return (-1);
	}
	if (confirm->MSTATUS)
	{
		Failure (plc, PLC_WONTDOIT);
		return (-1);
	}
	Confirm (plc, "Written");
	return (0);
}


#endif